Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "W.Ch." wg kryterium: Autor


Tytuł:
A multiscale methodology for CFD simulation of catalytic distillation bale packings
Autorzy:
Ding, H.
Xiang, W.
Liu, Ch.
Powiązania:
https://bibliotekanauki.pl/articles/780059.pdf
Data publikacji:
2016
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
multiscale model
CFD
reactive distillation
Opis:
A multiscale model for simulating the hydrodynamic behavior of catalytic bale packings has been proposed. This model combines computational fluid dynamics (CFD) and macroscopic calculation. At small scale calculation, the CFD model includes 3-D volume-of-fluid (VOF) simulation within representative elementary unit (REU) under unsteady-state conditions. The REU constitutes gauze and catalyst domain, and porous media model is applied. At large scale calculation, a new mechanistic model deduced from the unit network model is employed. Based on liquid split proportion from small scale calculation, liquid distribution of the entire bale packing can be predicted. To evaluate different packing design, three common bale arrangements, i.e. one-bale, nine-bales and seven-bales, are compared. The area-weighted Christiansen uniformity coefficient is introduced to assess the distribution performance. A comparison between simulation and experimental results is made to validate the multiscale model. The present methodology is proved to be effective to analysis and design of catalytic distillation columns.
Źródło:
Polish Journal of Chemical Technology; 2016, 18, 1; 24-32
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Study On The Fabrication Of Iron Powder From Forging Scale Using Hydrogen
Próby wytwarzanie proszku żelaza metodą redukcji zgorzeliny pochodzącej z procesów kucia za pomocą wodoru
Autorzy:
Shin, S. M.
Lee, D.-W.
Yun, J.-Y.
Kang, Ch.-Y.
Wang, J.-P.
Powiązania:
https://bibliotekanauki.pl/articles/350946.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
forging scale
hydrogen partial pressure
hematite
iron powder
kucie za pomocą wodoru
hematyt
redukcja zgorzeliny
proszek żelaza
Opis:
This study was conducted to investigate the effect of hydrogen content, temperature, reaction time for the reduction of forging scale which is mainly composed of hematite (Fe2O3). All reductive reactions were performed over the temperature range of 700 to 1200°C as well as 0.1 to 1 atm of hydrogen partial pressures. The results showed that the mechanism for the reduction of iron oxides using hydrogen gas was not a simple process, but proceeded in multiple reduction stages thermodynamically. The iron oxide was almost completely reduced to metallic iron powder with 91 wt.% of iron content in the forging scale at 0.1 atm of hydrogen partial pressure. The content of iron was however found to be increased with increasing hydrogen partial pressure from 0.1 to 1 atm with regardless of temperatures. The metallic iron powder was obtained with the mean size of 100 μm and more porous structure was observed.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1547-1549
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Study On The Metal Carbide Composite Diffusion Bonding For Mechanical Seal
Badanie łączenia dyfuzyjnego kompozytu metal węglik na mechaniczne uszczelnienie
Autorzy:
Kim, D.-K.
Shon, I.-J.
Song, J.
Ryu, W.-J.
Shin, H.-Ch.
Kwon, E.-Y.
Shin, H.
Kang, S.-J.
Powiązania:
https://bibliotekanauki.pl/articles/356399.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
diffusion bonding
nanostructures
mechanical seal
hard metal
mechanical properties
łączenie
nanostruktura
uszczelnienie mechaniczne
twardy metal
właściwości mechaniczne
Opis:
Mechanical Seal use highly efficient alternative water having a great quantity of an aqueous solution and has an advantage no corrosion brine. Metal Carbide composites have been investigated as potential materials for high temperature structural applications and for application in the processing industry. The existing Mechanical seal material is a highly expensive carbide alloy, and it is difficult to take a price advantage. Therefore the study of replacing body area with inexpensive steel material excluding O-ring and contact area which demands high characteristics is needed. The development of WC-Ni base carbide alloy optimal bonding composition technique was accomplished in this study. To check out the influence of bonding temperature and time, bonding characteristics of sintering temperature was experimented. The bonding statuses of this test specimen were excellent. The hardness of specimen and bonding rate were measured using ultrasound equipment. In this work, Powder of WC (involved VC, Cr), Co and Mo2C mixed by attrition milling for 24hours. Nanostructured WC-27.6wt.%Ni-1.5wt.%Si-0.11wt.%VC-1.1wt.%B4C composite were fabricated at 1190°C by high temperature vacuum furnace. To check out the influence of bonding temperature and time, bonding characteristics of sintering temperature was experimented. Its relative density was about 99.7%. The mechanical properties (hardness and fracture toughness) were 87.2 HRA and 4.2 M·Pam1/2, respectively. The bonding status of this test specimen was excellent and the thickness of bonding layer was 20 ~30§ at 1050 and 1060°C bonding temperature.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1479-1483
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Absorption of Thin ZnSe, ZnS and ZnS$\text{}_{x}$Se$\text{}_{1-x}$ Films under High Hydrostatic Pressure
Autorzy:
Griebl, E.
Schőtz, G.
Birzer, Ch.
Kerner, W.
Reisinger, T.
Hahn, B.
Gebhardt, W.
Powiązania:
https://bibliotekanauki.pl/articles/1934060.pdf
Data publikacji:
1995-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.61.Ga
71.35.+z
Opis:
We present absorption measurements on free-standing ZnSe, ZnS and ZnS$\text{}_{x}$Se$\text{}_{1-x}$ films (d = 0.4...2 μm) under hydrostatic pressure up to 15 GPa. The refraction index n(λ,P) of ZnS and ZnSe in the transparent region up to 800 nm and the pressure shift of the E0 absorption edge of ZnSe and some ZnS$\text{}_{x}$Se$\text{}_{1-x}$-compositions was investigated at 293 K. At 2 K free exciton states near the E$\text{}_{0-}$ and E$\text{}_{0}$ + Δ$\text{}_{0}$-gap are visible in absorption. Increase in the Rydberg energy under pressure was found, which is explained with k • p-theory in the framework of the hydrogen model.
Źródło:
Acta Physica Polonica A; 1995, 88, 5; 995-999
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biomechanical study of the influence of the weight of equipment on selected trunk muscles
Autorzy:
Schulze, Ch.
Lindner, T.
Woitge, S.
Glass, A.
Fimze, S.
Mittelmeier, W.
Bader, R.
Powiązania:
https://bibliotekanauki.pl/articles/306939.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
activity
EMG
equipment
posture
aktywność
postawa
Opis:
Overexertion and pain of the musculoskeletal system may occur partly owing to load application by the equipment. Both the weight of equipment and the duration of loading are relevant. The aim of the present study was to examine the extent of loading and resultant strain in the trunk muscles. Therefore, the trunk posture of soldiers and muscular activity in reaction to different equipment components (helmet, load-carrying equipment, gun and backpack) were evaluated. Electromyography was performed and a visual assessment of body axis was conducted based on standardised planar images. Data indicate that the activity of the trunk muscles examined (latissimus dorsi, trapezius and pectoralis major) is dependent on the weight and distribution of the equipment components. Activity in the trapezius muscle, for instance, was doubled during specific load application. Moreover, the method of carrying the rifle had a significant influence on the activity of the trapezius muscle (one-sided decrease of activity by 50%). Subjects were able to stabilise the body axis in the coronal plane through increased muscle activity, however, in the sagittal plane a compensatory ventral inclination of the body was observed. Uneven load distribution can lead to an irregular strain on the musculoskeletal system.
Źródło:
Acta of Bioengineering and Biomechanics; 2013, 15, 3; 45-51
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ca-Modified Co/SBA-15 Catalysts for Hydrogen Production through Ethanol Steam Reforming
Autorzy:
Chiou, J. Y. Z.
Liu, S. W.
Ho, K. F.
Huang, H. H.
Tang, Ch. W.
Wang, Ch. B.
Powiązania:
https://bibliotekanauki.pl/articles/411682.pdf
Data publikacji:
2014
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
cobalt catalysts
ethanol
steam reforming
Opis:
Hydrogen production through steam reforming of ethanol (SRE) over the Ca-modified Co/SBA-15 catalysts was studied herein to evaluate the catalytic activity, stability andthebehavior of coke deposition.The Ca-modified SBA-15 supports were prepared from the Ca(NO3)2•4H2O (10 wt%) which was incorporated to SBA-15 by incipient wetness impregnation (assigned as Ca/SBA-15) and direct hydrothermal (assigned as Ca-SBA-15) method. The active cobalt species from the Co(NO3)2•6H2O (10 wt%) was loaded to SiO2, SBA-15 and modified-SBA-15 supports with incipient wetness impregnation method to obtain the cobalt catalysts (named as Co/SiO2, Co/SBA-15, Co-Ca/SBA-15 and Co/Ca-SBA-15, respectively). The prepared catalysts were characterized by using X-ray diffraction (XRD), temperature programmed reduction (TPR), transmission electron microscopy (TEM) and BET.The catalytic performance of the SRE reaction was evaluated in a fixed-bed reactor.The results indicated that the Co/Ca-SBA-15 catalystwas preferential among these catalysts and the ethanol can be converted completely at 375 °C. The hydrogen yield (YH2) approached 4.76 at 500 °C and less coke deposited. Further, the long-term stabilitytest of this catalyst approached100h at 500 °C and did not deactivate.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2014, 5; 1-16
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comment and reply on "Palaeoenvironmental control on distribution of crinoids in the Bathonian (Middle Jurassic) of England and France" by Aaron W. Hunter and Charlie J. Underwood
Autorzy:
Hunter, A.W.
Underwood, Ch.J.
Powiązania:
https://bibliotekanauki.pl/articles/20228.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
paleontology
paleoenvironment control
discussion
distribution
crinoid
Bathonian
Middle Jurassic
Jurassic
England
France
Źródło:
Acta Palaeontologica Polonica; 2010, 55, 1
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of electrophysical and structural properties of human cancellous bone and synthetic bone substitute material using impedance spectroscopy and X-ray powder diffraction
Autorzy:
Haba, Y.
Köckerling, M.
Shick, Ch.
Mittelmeier, W.
Bader, R.
Powiązania:
https://bibliotekanauki.pl/articles/306920.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
kość syntetyczna
spektroskopia impedancyjna
dyfrakcja promieniowania rentgenowskiego
human cancellous bone
synthetic bone
impedance spectroscopy
X-ray powder diffraction
Opis:
Electrophysical stimulation is used to support fracture healing and bone regeneration. For design optimization of electrostimulative implants, in combination with applied human donor bone or synthetic bone scaffolds, the knowledge of electrophysical properties is fundamental. Hence further investigations of the structural properties of native and synthetic bone is of high interest to improve biofunctionality of bone scaffolds and subsequent healing of the bone defect. The investigation of these properties was taken as an objective of this study. Therefore, surgically extracted fresh cylindrical and consecutively ashed cancellous bone samples from human osteoarthritic femoral heads were characterized and compared to synthetic bone substitute material. Thereby, impedance spectroscopy is used to determine the electrophysical properties and X-ray powder diffraction (XRD) for analysis of structural information of the bone samples. Conductivity and permittivity of fresh and ashed cancellous bone amounted to 1.710–2 S/m and 7.5106 and 210–5 S/m and 7.2103 , respectively. Electrical conductivity and dielectric permittivity of bone scaffold resulted in 1.710–7 S/m and 49. Analysis of the structural properties showed that the synthetic bone scaffolds made of Brushite exhibited some reflections which correspond to the native bone samples. The information in present study of the bone material (synthetic and autologous) could be used for later patient individual application of electrostimulative implants.
Źródło:
Acta of Bioengineering and Biomechanics; 2018, 20, 1; 11-19
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of hadronic rescattering on the elliptic flow after the hydrodynamics model
Autorzy:
Ma, G.
Ma, Y.
Sa, B.
Cai, X.
He, Z.
Huang, H.
Long, J.
Shen, W.
Zhong, Ch.
Chen, J.
Zuo, J.
Zhang, S.
Shi, X.
Powiązania:
https://bibliotekanauki.pl/articles/148372.pdf
Data publikacji:
2006
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
elliptic flow
hydrodynamic model
hadronic rescattering
LUCIAE model
Opis:
Abstract A hydrodynamics + hadronic rescattering model is used to simulate Au+Au collisions at 200 GeV and a Cooper-Frye method is adopted for hadronization. The effect of hadronic rescattering on elliptic flow V2 in 20 40% Au+Au collisions at 200 GeV has been investigated. It is found that the hadronic rescattering can suppress elliptic flow V2 and makes an asymmetric system in momentum space tend to be less anisotropic. The suppression effect becomes weak with increasing transverse momentum. In addition, the effect of hadronic rescattering on transverse momentum spectra and anisotropy of hadronic coordinate space is presented.
Źródło:
Nukleonika; 2006, 51,suppl.3; 21-27
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Elastic modulus for long-term evaluation of the tensile properties of polypropylene meshes in an in vivo rat model
Autorzy:
Przydacz, M.
Mahfouz, W.
Loutochin, O.
Ghezzi, Ch. E.
Carmel, M.
Corcos, J.
Powiązania:
https://bibliotekanauki.pl/articles/306894.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
wytrzymałość
stała sprężystości
I-STOP
TVT-O
tensile properties
elastic modulus
mid-urethral slings
Opis:
Mid-urethral slings have become the gold standard treatment of stress urinary incontinence in women. Their tensile properties should be evaluated to measure how they wear off with time. Our objective was long-term assessment of the tensile properties of 2 synthetic tapes (TVT-O and I-STOP) after in vivo implantation in rats in terms of elastic modulus. Methods: Strips from both meshes were implanted in the abdominal wall of 30 rats, which were sacrificed at 5 time intervals. Their fibers were untangled to single components. Ultimate tensile strength (UTS), strain at UTS and the elastic modulus of each fiber type were measured. Results: I-STOP maintained UTS and strain over time, while TVT-O UTS and strain were significantly reduced. However, the elastic modulus of both tapes remained constant. Conclusions: Both meshes maintained their stiffness and elasticity with time. Elastic modulus could be an appropriate factor to predict long-term implantation outcomes. The clinical significance of such findings remains to be demonstrated by long-term analysis.
Źródło:
Acta of Bioengineering and Biomechanics; 2017, 19, 4; 153-160
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies