Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Wójtowicz, P." wg kryterium: Autor


Tytuł:
Ocena skuteczności adsorpcyjnego usuwania związków arsenu z roztworów wodnych na granulowanym wodorotlenku żelaza
Adsorptive removal of arsenic species from aqueous solutions using granular ferric hydroxide
Autorzy:
Szlachta, M.
Wójtowicz, P.
Powiązania:
https://bibliotekanauki.pl/articles/236892.pdf
Data publikacji:
2016
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
oczyszczanie wody
oczyszczanie ścieków
adsorpcja
arsen(III)
arsen(V)
adsorbent żelazowy
water treatment
wastewater treatment
adsorption
arsenite
arsenate
iron based adsorbent
Opis:
Badano skuteczność adsorpcyjnego usuwania związków arsenu(III) i (V) z modelowych roztworów wodnych na granulowanym wodorotlenku żelaza (CFH-12). Badania zrealizowano w układzie porcjowym i przepływowym w skali laboratoryjnej. Maksymalna pojemność adsorpcyjna materiału CFH-12 względem As(III) i As(V), obliczona na postawie równania izotermy Langmuira, wynosiła odpowiednio 43,75 mg/g i 44,04 mg/g. Do opisu kinetyki adsorpcji anionowych form arsenu w badanym układzie wykorzystano równanie kinetyczne pseudo I i pseudo II rzędu. Zaobserwowano podobny przebieg kinetyki usuwania As(III) i As(V), polegający na szybkiej adsorpcji jonów w fazie początkowej, a następnie stopniowym spowolnieniu procesu. Badania zrealizowane w układzie przepływowym potwierdziły dużą wydajność i stabilność adsorbentu CFH-12 podczas usuwania związków arsenu. Ich stężenie w odpływie z kolumn adsorpcyjnych utrzymywało się poniżej wartości dopuszczalnej 10 µg/dm3 przez czas pracy kolumn odpowiadający wymianie 15 tys. objętości złoża. Z tego względu zastosowanie granulowanego wodorotlenku żelaza do adsorpcyjnego oczyszczania wód i ścieków z przemysłu wydobywczego zanieczyszczonych związkami arsenu można traktować jako skuteczne i niezawodne rozwiązanie.
Efficacy of arsenic(III) and (V) adsorptive removal from aqueous model solutions on the granular ferric hydroxide (CFH-12) was analyzed. Batch adsorption and fixed bed column experiments were performed on the laboratory scale. Maximum adsorption capacity of CFH-12 for As(III) and As(V) calculated by the Langmuir equation amounted to 43.75 mg/g and 44.04 mg/g, respectively. Pseudo-first and pseudo-second order equation was employed to description of adsorption kinetics of anionic arsenic species. A similar adsorption kinetics behavior of As(III) and As(V) was observed, relying on a quick ion adsorption in the initial phase, followed by a gradual process slowdown. The adsorption test results under dynamic conditions demonstrated high adsorbent efficacy and stability over a long period of time. The arsenic concentration in the effluent remained below the accepted threshold of 10 μg/dm3 during the column operation time corresponding to 15 thousand bed volumes. Hence, application of granular hydroxide to adsorptive treatment of arsenic contaminated water and wastewater from mine industry should be regarded as a robust and effective solution.
Źródło:
Ochrona Środowiska; 2016, 38, 4; 47-52
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Usuwanie barwników organicznych z roztworów wodnych w obecności substancji humusowych z użyciem pyłowego węgla aktywnego i nanorurek węglowych
Removal of organic dyes from aquatic solution containing humic substances using activated carbon and carbon nanotubes
Autorzy:
Szlachta, M.
Wójtowicz, P.
Powiązania:
https://bibliotekanauki.pl/articles/237440.pdf
Data publikacji:
2018
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
adsorpcja
błękit metylenowy
czerwień Kongo
substancje humusowe
rozpuszczony węgiel organiczny
pyłowy węgiel aktywny
nanorurki węglowe
adsorption
methylene blue
Congo Red
humic substances
dissolved organic carbon
powdered activated carbon
carbon nanotubes
Opis:
W pracy poddano ocenie przydatność pyłowego węgla aktywnego i wielościennych nanorurek węglowych do usuwania syntetycznych barwników organicznych z roztworów modelowych zawierających substancje humusowe. W badaniach, jako substancje modelowe, wykorzystano kationowy barwnik – błękit metylenowy, anionowy barwnik – czerwień Kongo oraz substancje humusowe o masie cząsteczkowej w zakresie 150÷8000 Da. Testowane adsorbenty węglowe charakteryzowały się odmienną strukturą porowatą oraz różnym chemicznym charakterem powierzchni, co wpływało na ich powinowactwo do adsorbatów usuwanych z wodnych roztworów modelowych. Wykazano, że skuteczność adsorpcji błękitu metylenowego i czerwieni Kongo w dużym stopniu zależała od rodzaju zastosowanego adsorbentu oraz ilości substancji humusowych w wodzie. Ponadto potwierdzono, że stosowanie materiałów węglowych częściowo wysyconych substancjami humusowymi niekorzystnie wpływało na skuteczność adsorpcji barwników. Wykazano, że pyłowy węgiel aktywny był skuteczniejszym adsorbentem w usuwaniu błękitu metylenowego, natomiast w przypadku czerwieni Kongo lepsze efekty procesu adsorpcji uzyskano stosując nanorurki węglowe. Wzrost ilości substancji humusowych (określany jako RWO) w oczyszczanym roztworze z 1 mgC/dm3 do 30 mgC/dm3 skutkował większą adsorpcją błękitu metylenowego na badanych adsorbentach węglowych. Odnotowany przyrost skuteczności usuwania tego barwnika wynosił około 12% na pyłowym węglu aktywnym i 34% na nanorurkach węglowych. Badania z udziałem czerwieni Kongo wykazały mniejszy stopień usunięcia tego barwnika z roztworów zawierających większe ilości substancji humusowych na obu adsorbentach węglowych.
The study aimed to assess suitability of multiwalled carbon nanotubes and powdered activated carbon for removal of synthetic organic dyes from model solutions containing humic substances. The model solution contained cationic dye methylene blue, anionic Congo Red and humic substances of molecular weight in the range from 150 to 8000 Da. The carbon adsorbents tested had a different porous structure and surface chemistry which influenced their affinity towards adsorbates removed from the aquatic model solutions. It was demonstrated that the efficacy of the methylene blue and Congo Red adsorption depended on the adsorbent type and the amount of humic substances in water. Further, application of adsorbents pre-loaded with humic substances adversely affected the efficacy of dye adsorption. Studies revealed that the powdered activated carbon was more effective in the methylene blue adsorption, while the carbon nanotubes – in the Congo Red removal. An increase of humic substances (known as DOC) from 1 to 30 mgC/dm3 enhanced the adsorption of methylene blue on the carbon adsorbents tested. The noted increase in efficacy of the dye removal was approximately 12% for the powdered activated carbon and 34% for the carbon nanotubes. The opposite trend was observed for Congo Red where the presence of humic substances adversely affected adsorption on the two carbon adsorbent types.
Źródło:
Ochrona Środowiska; 2018, 40, 2; 45-50
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania modelowe cylindrycznych regulatorów hydrodynamicznych
Model testing of cylindrical hydraulic regulators
Autorzy:
Wójtowicz, P.
Kotowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/237528.pdf
Data publikacji:
2008
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
hydraulika
badania modelowe
przepływ cieczy
regulator hydrauliczny
dławienie przepływu
hydraulics
model testing
liquid flow
cylindrical hydraulic regulator
throttling
Opis:
Na podstawie analizy stanu wiedzy z zakresu urządzeń o działaniu wirowym, opracowano metodologię badań modelowych regulatorów wirowych przepływu cieczy do zastosowań w inżynierii środowiska. Przedstawiono wybrane wyniki badań wpływu parametrów konstrukcyjnych (średnica i wysokość komory wirowej, średnica króćca dopływowego i otworu odpływowego), a także eksploatacyjnych (średnica rdzenia gazowego i kąt rozpylenia cieczy) na charakterystykę przepływu regulatorów o cylindrycznym kształcie komory wirowej. Zbadane zależności funkcyjne umożliwiają racjonalny dobór parametrów geometrycznych tych regulatorów. Wykazano, że uwzględnienie parametrów eksploatacyjnych przyczynia się do zwiększenia dokładności opisu współczynnika przepływu badanych urządzeń. Wykazano, że ustalone wzory empiryczne umożliwiają projektowanie konstrukcji takich regulatorów.
Upon analysis of the current knowledge regarding vortex devices, a model test methodology for liquid flow vortex regulators has been developed, which is of practical use in environmental engineering and pollution control. The paper presents a choice of test results elucidating the effect of construction parameters (vortex chamber diameter and height, inlet and outlet diameter), as well as operation parameters (air core diameter and spray cone angle), on the performance of flow regulators with cylindrical vortex chambers. The investigated functional relations enable a rational choice of geometrical parameters for the regulators in question. It has been demonstrated that when the operation parameters are taken into account, the description of the discharge coefficient of the devices tested gains in accuracy. The empirical formulae derived are of support to the designer of the constructions for such regulators.
Źródło:
Ochrona Środowiska; 2008, 30, 2; 35-41
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania modelowe stożkowych regulatorów hydrodynamicznych
Model testing of conical vortex flow hydrodynamic regulators
Autorzy:
Wójtowicz, P.
Kotowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/237844.pdf
Data publikacji:
2008
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
hydraulika
badania modelowe
przepływ cieczy
dławienie przepływu
regulator stożkowy
hydraulics
model testing
liquid flow
flow throttling
conical regulator
Opis:
Na podstawie analizy stanu wiedzy z zakresu urządzeń o działaniu wirowym opracowano metodologię badań modelowych regulatorów wirowych przepływu cieczy, przeznaczonych zwłaszcza do zastosowań w układach do oczyszczania wody i ścieków. Przedstawiono wybrane wyniki badań dotyczących wpływu parametrów geometrycznych stożkowej komory wirowej, w tym jej orientacji przestrzennej oraz średnicy króćca dopływowego i średnicy otworu odpływowego, a także kąta rozpylenia cieczy, na charakterystykę przepływu regulatora. Wykazano, że zbadane zależności funkcyjne umożliwiają racjonalny dobór parametrów konstrukcyjnych regulatorów stożkowych. Wykazano, że uwzględnienie dodatkowego parametru eksploatacyjnego, jakim jest kąt rozpylenia cieczy, przyczynia się do wzrostu dokładności opisu ilościowego współczynnika przepływu badanych urządzeń. Ustalone w pracy wzory empiryczne umożliwiają ocenę wpływu parametrów konstrukcyjnych stożkowych regulatorów hydrodynamicznych na wartość współczynnika przepływu, a tym samym umożliwiają optymalny ich dobór (ze względu skuteczność dławienia) do konkretnych zastosowań praktycznych, zwłaszcza w inżynierii środowiska.
Upon analysis of the state-of-the-art in the field of vortex flow hydrodynamic devices, a model testing technology has been developed for conical vortex flow regulators designed for application mainly in water and wastewater treatment systems. Presented are examples of results referring to the effect of the geometrical parameters of the conical vortex chamber (spatial orientation, diameter of inlet connector pipe, diameter of outlet opening, spray cone angle) on the flow characteristics of the regulator. It has been demonstrated that the functional relations examined enable a rational choice of the construction parameters for a conical regulator and that the inclusion of an additional operational parameter, namely the spray cone angle, upgrades the accuracy of the quantitative description of the discharge coefficient for the conical flow regulators examined. With the empirical formulae derived for the purpose of the study it is possible to establish how the construction parameters of hydrodynamic conical regulators affect the value of the discharge coefficient. And this enables an optimal choice of these parameters (because of the throttling effect) for practical use, particularly in environmental engineering.
Źródło:
Ochrona Środowiska; 2008, 30, 3; 37-44
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ferric hydroxide-based media for removal of toxic arsenic species. Kinetic, equilibrium and thermodynamic studies
Autorzy:
Szlachta, M.
Wójtowicz, P.
Powiązania:
https://bibliotekanauki.pl/articles/207931.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
Freundlich isotherm
Langmuir isotherm
arsenic
adsorption
sewage
izoterma Freundlicha
izoterma Langmuira
arsen
adsorpcja
ścieki
Opis:
Adsorption studies were conducted to assess the feasibility of ferric hydroxide-based material for treatment of highly arsenic-contaminated effluents. The experiments were performed in a batch adsorption regime using a synthetic aqueous solution. The contact time between arsenic ions and the adsorbent, initial concentration of arsenic in treated solution, temperature of solution and adsorbent dose had a significant effect on the adsorption performance in the system. Both the mechanism of the process involved and the rate of As(III) and As(V) adsorption were analyzed based on pseudo-firstand pseudo-second order kinetic models. The adsorption data at constant temperature were described by the Langmuir and Freundlich isotherm equation, and the theoretical adsorption capacity of ferric hydroxide was determined to be 43.75 mg/g and 44.04 mg/g for arsenic(III) and (V), respectively. The estimated thermodynamic parameters, including changes in free energy, enthalpy and entropy, revealed that the adsorption is spontaneous and endothermic under applied experimental conditions.
Źródło:
Environment Protection Engineering; 2018, 44, 4; 117-129
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Idea of wheel-legged robot and its control system design
Autorzy:
Szrek, J.
Wojtowicz, P.
Powiązania:
https://bibliotekanauki.pl/articles/199933.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wheel-legged robot
control system design
Opis:
The wheel-legged robot is a vehicle with many degrees of freedom. Thanks to its peculiar design, depending on the need, the vehicle will use one of its ways of moving: travelling on wheels or walking (in special situations), which enhances its locomotive properties. The paper presents the robot’s kinematic wheel suspension system, general operation strategy and control system. The application responsible for robot control and data visualization is described. Finally, selected tests of the algorithms, carried out on the robot prototype, are presented.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2010, 58, 1; 43-50
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurement of air-water oxygen transfer of cylindrical vortex flow regulators at a recirculating system
Autorzy:
Wójtowicz, P.
Szlachta, M.
Kotowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/208207.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
hydrodynamics
storms
vortex flow
aeration efficiencies
hydrodynamic flows
oxygen mass transfer
oxygen transfer rate
recirculating system
stormwater systems
sewerage
oxygen
hydrodynamika
burze
wiry
efektywność napowietrzania
przepływy hydrodynamiczne
przenoszenia masy tlenu
szybkość transferu tlenu
system recyrkulacji
systemy deszczowe
kanalizacja
napowietrzanie
Opis:
Hydrodynamic flow regulators are used for diversion and/or limiting excess discharge in wastewater and stormwater systems as a replacement for traditional flow throttling devices. They are highly efficient, reliable and free from common disadvantages of traditional devices. Recent research of the authors indicated that atomization of a liquid by vortex flow regulators accelerates oxygenation and prevents the putrefaction process in wastewater and storm water collection systems. The study presents experimental results of the oxygen transfer measurements for basic designs of cylindrical hydrodynamic flow regulators in a closed-circuit experimental setup at the semi-commercial scale. The oxygen mass transfer coefficient, standard oxygen transfer rate and standard aeration efficiency were determined for the range of tested configurations by the clean water test.
Źródło:
Environment Protection Engineering; 2013, 39, 3; 207-215
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowanie miejskiego systemu zaopatrzenia w wodę na przykładzie osiedla mieszkaniowego Baranówka w Rzeszowie
Modeling of a municipal water distribution system: A case study
Autorzy:
Kotowski, A.
Pawlak, A.
Wójtowicz, P.
Powiązania:
https://bibliotekanauki.pl/articles/237295.pdf
Data publikacji:
2010
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
modelowanie
sieć wodociągowa
pobór wody
ciśnienie
przepływ
kalibracja
modeling
water-pipe network
water demand
pressure
flow rate
calibration
Opis:
Będący przedmiotem badań proces identyfikacji oporności hydraulicznej sieci wodociągowej osiedla Baranówka w Rzeszowie polegał na iteracyjnym dopasowywaniu hipotetycznych oporności każdego przewodu do wartości oporności rzeczywistych, w oparciu o dane wyjściowe dotyczące rodzaju materiału przewodów, czasu eksploatacji, jakości wody oraz wyników pomiarów oporności wybranych przewodów na sieci. Weryfikację zbudowanego modelu oraz adekwatności oporności przewodów przeprowadzono na podstawie kilku eksperymentów, polegających na jednoczesnym pomiarze ciśnienia i strumienia przepływu wody w wybranych punktach pomiarowych, przy zastosowaniu kontrolowanych upustów wody. Proces identyfikacji uznano za zakończony, gdy różnice ciśnień zmierzonych w sieci oraz zasymulowanych przy pomocy zbudowanego modelu nie przekraczały 2 mH2O. Uzyskane wyniki analiz porównawczych, które zostały przeprowadzone w zmiennych warunkach zasilania i poboru wody w sieci wodociągowej, potwierdzają adekwatność zbudowanego modelu hydraulicznego na poziomie założonej dokładności.
The case in point is the water distribution system in Baranowka, a housing estate of the city of Rzeszow. The object under study is the process of hydraulic resistance identification for this water distribution system. The paper includes a description of the identification process, which consisted in adjusting the hypothetic resistance of each pipe to its real resistance, making use of the following input data: pipe material and age, quality of transported water, and the measured values of hydraulic resistance for selected pipes. The constructed hydraulic model and the adequacy of the estimated pipe resistance were verified by a number of experiments, where pressure and flow rate were measured simultaneously at selected points of the water-pipe network during controlled fire hydrant outflows. The identification process was regarded as completed when the difference between the pressure measured in the water-pipe network and the pressure simulated using the hydraulic model did not exceed 2 mH2O. The results of comparative analysis performed under variable conditions of water demand and supply in the water-pipe network substantiate the adequacy of the hydraulic model at the level of the accuracy assumed.
Źródło:
Ochrona Środowiska; 2010, 32, 2; 43-48
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metals in organs of bottom sediments and aquatic plants of the Ełk River and its tributaries
Autorzy:
Skorbiłowicz, E.
Skorbiłowicz, M.
Zamojska, E.
Wójtowicz, P.
Powiązania:
https://bibliotekanauki.pl/articles/184486.pdf
Data publikacji:
2018
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
river
metals
bottom sediments
aquatic plants
Opis:
The aim of the work was to analyze the content of Ni, Pb and Cd in organs (root, stem, leaf) Typha latifolia L. and Nuphar lutea as well as bottom sediments of the Ełk River and selected tributaries. An attempt was also made to indicate the factors and processes governing the behavior of the investigated metals in the water environment of the examined rivers. The research object was the Ełk River with its three tributaries - the Gawlik River, the Binduga River and the Kuwasy Canal. Samples of bottom sediments, leaves, stems and roots of Typha latifolia L. and Nuphar lutea were collected in August of 2015. The content of metals was determined by flame atomic absorption spectrometry (F-AAS). The results of analyses of sediments and plant material indicate a lack of environmental pollution by nickel (2.58-8.50 mg-kg-1) and lead (3.82-15.99 mg-kg-1) of the Ełk River and its tributaries whereas the cadmium content ranged from 0.16-0.76 mg-kg-1. Nuphar lutea and Typha latifolia L. showed a varied capacity to accumulate nickel (1.20-10.51 mg-kg-1) and lead (0.04-14.16 mg-kg-1), occurring primarily in the roots. The smallest concentration of nickel and lead was recorded in the stems. The highest concentration of cadmium (2.56 mg-kg-1) was noted in the roots and the lowest (0.01 mg-kg) in the leaves. Factor analysis pointed to the processes of mobilizing elements from bottom sediments as a result of pH drop and their uptake by macrophyte roots and sorption processes of metal ions by macrophytes from river waters and their intensive accumulation in bottom sediments.
Źródło:
Geology, Geophysics and Environment; 2018, 44, 3; 281-293
2299-8004
2353-0790
Pojawia się w:
Geology, Geophysics and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of Mixing Zones for Wastewater With Receiver Waters
Autorzy:
Skorbiłowicz, M.
Skorbiłowicz, E.
Wójtowicz, P.
Zamojska, E.
Powiązania:
https://bibliotekanauki.pl/articles/123741.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
distance of complete mixing
surface waters
wastewater discharge
Opis:
Discharges from wastewater treatment are among the key sources of pollution, if norms included in the applied legal acts are exceeded. In determining the impact of these objects on water environment it is often assumed that complete mixing wastewater with surface water is in the point or close to the discharge. In fact, the complete mixing of waste water in a short distance from the discharge occurs incidentally depending on the type of sewage receiver. The size and type of specific sewage receiver determines the conditions of self-purification. Complete mixing zone has a huge impact on the intensity of self-purification processes. Therefore, the possibility to determine the size zone of complete mixing of the waste water from the water receiver is important. The issue involves a series of methods, the most computational, which more or less allows to evaluate the distance of mixing waste water. advection, turbulent and molecular diffusion affect mixing wastewater with surface waters. The article discusses the factors influencing the mixing process and the impact of mixing on the self-purification surface waters. The aim of the article is a review of several methods for determining the distance of the segment mix completely discharged wastewater, with regard to the location of their discharge.
Źródło:
Journal of Ecological Engineering; 2017, 18, 4; 192-198
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Macrophytes as Ełk River Quality Status Evaluation Indicators Based on Example of Nickel
Autorzy:
Skorbiłowicz, E.
Skorbiłowicz, M.
Zamojska, E.
Ofman, P.
Wójtowicz, P.
Powiązania:
https://bibliotekanauki.pl/articles/123062.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
river
nickel
bottom sediment
macrophytes
Opis:
The aim of the study was to analyze the content of Ni in fractions of 1.0–0.2 mm, 0.2–0.1 mm, 0.1–0.063 mm, 0.063–0.02 mm, and <0.02 mm of river bottom sediments and plants (root, stem, leaf) of broadleaf cattail (Typha latifolia), yellow water lilies (Nuphar lutea), and cowbane (Cicuta virosa). Nickel content in bottom sediment was slightly higher than the geochemical background. The largest amounts of Ni were associated with the finest fraction, while the smallest with the thickest fraction. The highest content of this element was recorded at the point Ełk Barany, which was connected with developing industry in the city of Ełk. All of the tested plants showed greater Ni contents than the amount naturally occurring in plants. In most cases, most of Ni was associated with plant roots, and the least with leaves. It has been proven that aquatic plants can be good indicators of the aquatic environment status.
Źródło:
Journal of Ecological Engineering; 2016, 17, 3; 155-160
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Impact of Sewage Treatment Plant on the Amount of Heavy Metals in Water of the Supraśl River Catchment Area
Autorzy:
Skorbiłowicz, M.
Skorbiłowicz, E.
Wójtowicz, P.
Ofman, P.
Zamojska, E.
Powiązania:
https://bibliotekanauki.pl/articles/123581.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
sewage treatment plant
heavy metals
water
Opis:
The main purpose of this study was to evaluate the effect of treated sewage flowing from sewage treatment plants located in the basin of the Supraśl river on the concentration and load of metals in river waters and its main tributaries. Three measuring- control points were chosen, on the river and its tributaries, located near Gródek, Sokółka and Dobrzyniewo. Selected points were located behind the discharge of treated wastewater from sewage treatment plants respectively – Gródek, Sokółka and Bialystok. The samples of treated sewage and water were collected in a period from May to November, once a month in 2014. Each individual sample was examined for the content of dissolved form of the following metals: Pb2+, Cu2+, Cd2+, Ni2+, Zn2+, Fe2+/3+. After taking into account water flow of the Biała, Sokołda and Supraśl in every month, metals loads expressed in mg·h-1., transported by the Supraśl and its tributaries waters were calculated. In the study monthly metals loads discharged into the Biała, Sokołda and Supraśl by sewage treatment plants in Białystok, Sokółka and Gródek were also calculated. The studies have shown the impact of metals load in treated wastewater on metals loads in waters of studied rivers based on the obtained correlation. Most of the searched relations between loafs of Pb2+ – r = 0,88; Cd2+ – r = 0,98; Fe2+/3+ – r = 0,45; Ni2+ – r = 0,55; Zn2+ – r = 0,86 were obtained in case of wastewater treatment plant in Gródek and Supraśl waters. In the study period we observed a diversity in concentration of Cd2+, Fe2+/3+, Ni2+ and Zn2+ in treated sewage and in river waters, which affected loads of this metals.
Źródło:
Journal of Ecological Engineering; 2016, 17, 1; 136-142
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pollution Sources and Water Quality State of the Supraśl River
Autorzy:
Skorbiłowicz, M.
Skorbiłowicz, E.
Wójtowicz, P.
Ofman, P.
Zamojska, E.
Powiązania:
https://bibliotekanauki.pl/articles/124099.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
water quality
pollution
river
wastewater
Opis:
The main purpose of the study was to evaluate water quality of the Supraśl river and identify its main pollution sources. On the river and its tributaries, 8 control points were selected, located near Krynica, Gródek, Nowosiółki, Zasady (mouth of the tributary Sokołda), Supraśl, Nowodworce, Dobrzyniewo (mouth of the tributary Biała) and Dzikie. The control points were selected in such a way as to take into account the impact of major point sources of analyzed components located along the river and its main tributaries on water quality in the main stream catchment. Water samples were collected once a month during the period from May to November in 2014. In water samples the concentration of dissolved oxygen, Cl-, SO42-, N-NH4+, P-PO43- and the values of pH, BOD5 and electrolytic conductivity were indicated. Based on the obtained results, loads of the individual components in river waters were calculated as a product of concentration and Supraśl waters flow rate in a particular month. Supraśl waters, due to values of most analyzed parameters, should be classified as first quality class. The source of Cl-, SO42-, N-NH4+ in Supraśl waters were treated wastewater and other anthropogenic sources associated with the basin development. Reduced Supraśl water quality is caused by the inflow of organic substances expressed by BZT5 from natural and anthropogenic origin and concentration of PO43-, which were mainly delivered with treated wastewater.
Źródło:
Journal of Ecological Engineering; 2016, 17, 2; 64-69
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane zagadnienia analizy pola elektromagnetycznego miasta Lublin i uzdrowiska Nałęczów
Analysis of electromagnetic fields of provincial capital Lublin and Spa Naleczow
Autorzy:
Mazurek, P. A.
Wac-Włodarczyk, A.
Przytuła, K.
Wójtowicz, P. A.
Staszek, J.
Ścirka, T.
Masłowski, G.
Powiązania:
https://bibliotekanauki.pl/articles/400472.pdf
Data publikacji:
2012
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
emisja elektromagnetyczna
natężenie pola elektrycznego i magnetycznego
electromagnetic emission
electric fields
magnetic fields
Opis:
Na przekroju kilkudziesięciu ostatnich lat obserwowany jest duży wzrost liczby urządzeń wytwarzających pola elektromagnetyczne, który przekłada się na coraz większe zainteresowanie społeczeństwa zakresem oddziaływania tych urządzeń na środowisko. Obok tradycyjnych źródeł pól elektromagnetycznych jakimi są przesyłowe linie elektroenergetyczne, trakcje kolejowe czy tradycyjne nadajniki radiowo - telewizyjne, masowo pojawiają się nadajniki telefonii komórkowej i inne urządzenia radiokomunikacyjne. Pracownicy i studenci Wydziału Elektrotechniki i Informatyki Politechniki Lubelskiej przeprowadzili badania terenowe w dwóch miastach, w zakresie pomiaru natężeń pól elektrycznych i magnetycznych niskich częstotliwości oraz natężenia pola elektromagnetycznego w wysokich częstotliwościach. W artykule przedstawiono wyniki pomiarów oraz ich odniesienie do dopuszczalnych limitów.
The number of devices that produce electromagnetic fields is growing for decades. This translates into a growing public interest in range of influence of these devices on the environment. In addition to traditional sources of electromagnetic fields such as transmission power lines, rail traction or traditional radio- television transmitters, mass are built mobile transmitters and other radio communications equipment. Staff and students of the Lublin University of Technology measurements conducted in two cities - Lublin and Naleczow. The tests involved measuring intensities of electric and magnetic fields at low and high frequencies. The article presents the results of measurements and their reference to limits.
Źródło:
Inżynieria Ekologiczna; 2012, 30; 194-205
2081-139X
2392-0629
Pojawia się w:
Inżynieria Ekologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metabolomics and fluxomics in biotechnology: current trends
Autorzy:
Wojtowicz, W.
Mlynarz, P.
Powiązania:
https://bibliotekanauki.pl/articles/80398.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2016, 97, 2
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies