- Tytuł:
- Effect of externally adding pyrite and electrical current on galvanic leaching of chalcopyrite concentrate
- Autorzy:
-
Asgari, Kaveh
Hassanzadeh, Ahmad
Nazari, Sabereh
Vakylabad, Ali Behrad
Hosseinzadeh, Mostafa - Powiązania:
- https://bibliotekanauki.pl/articles/1447957.pdf
- Data publikacji:
- 2021
- Wydawca:
- Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
- Tematy:
-
copper concentrate
galvanic leaching
pyrite
electrical current
leaching kinetics - Opis:
- Although the operating properties of GalvanoxTM leaching have been widely studied in the literature, several factors concerning chalcopyrite passivation during the process remain unknown so far. The present work hence aims at investigating the significant effect of externally added pyrite features with a particular focus on its particle size (d80 of 0.52, 20, 45 and 2000 µm) through a series of experiments performed in a 2-L stirred-tank electro-reactor. To this end, the role of pyrite: chalcopyrite ratio (0.49:1, 2:1 and 4:1) and presence of electrical current were examined while the rest of the parameters kept constant (80 °C temperature, 400–500 mV (Ag/AgCl) redox potential, pulp density of 10% (w/v), and stirring rate of 1200 rpm). Plus, kinetic models of the leaching tests were studied based on the diffusion and chemical controlling concepts. It was found that the coarser the pyrite particles, the more favorable the copper extraction from the concentrate due to acceleration of reactions in the cathodic electrode and high mass transfers. However, this was in contradiction with the existing reports in the literature. Moreover, galvanic interactions became intensive in the presence of pyrite meaning extensive chalcopyrite dissolution with significantly reduced passivation. Ultimate copper extraction values of 24.17±1.25%, 55.79±0.91% and 57.26±1.59% were resulted at Py:Cp ratios of 0.49:1 (natural), 2:1 and 4:1, respectively. The results showed that maximum copper recovery of 67.32±2.34% was obtained at an optimum condition of pyrite grain size=2000 µm, Py:Cp=4:1, current application=500 mA, 8 h and 80 °C. Finally, detailed kinetic modeling indicated that the chemical control mechanism was dominant in the early reaction stages (t<3.5 h) concerning the availability of fresh surface for chemical agents; however, the second half of the process (8.0 h>t>3.5 h) was controlled by the diffusion control.
- Źródło:
-
Physicochemical Problems of Mineral Processing; 2021, 57, 2; 105-119
1643-1049
2084-4735 - Pojawia się w:
- Physicochemical Problems of Mineral Processing
- Dostawca treści:
- Biblioteka Nauki
Artykuł