Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Tutak, M." wg kryterium: Autor


Tytuł:
Analiza porównawcza ilości ujętego metanu przez kopalnie węgla kamiennego
Comparative analysis of the quantity of methane collected by hard coal mines
Autorzy:
Tutak, M.
Powiązania:
https://bibliotekanauki.pl/articles/323071.pdf
Data publikacji:
2018
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
ujęcie metanu
kopalnia węgla kamiennego
algorytm
aglomeracja
methane capture
coal mine
algorithm
agglomeration
Opis:
Procesowi podziemnej eksploatacji węgla kamiennego towarzyszy wydzielanie się metanu. Zjawisko to występuje we wszystkich krajowych kopalniach. Intensywność wydzielania się tego gazu ze złóż węgla kamiennego z roku na rok wzrasta. Jego część jest przechwytywana przez instalacje odmetanowujące i wykorzystywana do celów gospodarczych. Gospodarcze wykorzystanie metanu przez polskie kopalnie węgla kamiennego w 2016 roku wynosiło 168,14 mln m3/rok. Oznacza to, że około 30-31% metanu ujęte zostało za pomocą instalacji odmetanowania, a 69-70% wyemitowano do środowiska naturalnego. W artykule przedstawiono wyniki analizy mającej na celu identyfikację kopalń jednorodnych pod względem ilości ujmowanego metanu z górotworu systemami odmetanowania oraz jego gospodarczego wykorzystania. Analizę przeprowadzono na podstawie danych z 2016 roku. Objęła ona swoim zakresem 21 kopalń węgla kamiennego. Szczegółowe badania przeprowadzono, wyko-rzystując jedną z metod hierarchicznych grupowania, jaką jest metoda algorytmu aglomeracji. Zastosowanie tej metody pozwoliło wyodrębnić jednorodne podzbiory analizowanych obiektów (kopalń), dla których jako miarę odległości między kopalniami przyjęto odległość euklidesową.
Underground hard coal exploitation is accompanied by the release of methane. This phenomenon is present in all the mines across the country. The intensity of methane release from hard coal deposits increases year by year. Part of this gas is collected by demethylation systems and used for industrial purposes. The industrial utilisation of methane by Polish hard coal mines in 2016 amounted to 168.14 million m3/year. This means that approximately 30-31% of the methane was collected by means of demethylation systems, whereas 69-70% was emitted into the environment. The paper presents the results of an analysis aiming to identify homogeneous mines in terms of the quantity of methane collected from the rock mass by means of demethylation systems and its industrial utilisation. The analysis was carried out on the basis of 2016 data and it encompassed 21 hard coal mines. The detailed analysis was conducted using one of the hierarchical grouping methods, namely the agglomeration algorithm method. This method made it possible to isolate homogeneous subsets of items under analysis (mines), adopting the Euclidean distance as a measure of distance between the mines.
Źródło:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska; 2018, 117; 661-674
1641-3466
Pojawia się w:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie metod taksonomicznych do analizy zużycia energii elektrycznej przez poszczególne województwa
The use of taxonomic methods for analysing electricity consumption by the individual provinces
Autorzy:
Tutak, M.
Powiązania:
https://bibliotekanauki.pl/articles/323203.pdf
Data publikacji:
2018
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
energia elektryczna
sektor gospodarczy
metoda k-średnich
grupowanie
electricity
economic sector
k-means method
grouping
Opis:
Najważniejszym czynnikiem wpływającym z jednej strony na rozwój gospodarczy i dobrobyt społeczeństwa, a z drugiej na łagodzenie skutków jego ubóstwa jest energia elektryczna i jej dostępność. Rozwijająca się gospodarka kraju generuje coraz większe zapotrzebowanie na energię. Poszczególne województwa Polski charakteryzują się różnym stopniem wykorzystania energii elektrycznej w podstawowych sektorach ekonomicznych. Wykorzystanie energii elektrycznej uzależnione jest od wielu czynników, m.in. od stopnia uprzemysłowienia regionu, lokalizacji elektrowni, a także od liczby ludności i gospodarstw domowych. W artykule przedstawiono wyniki analizy porównawczej zużycia energii elektrycznej w poszczególnych województwach Polski z uwzględnieniem sektorów ekonomicznych. Do uzyskania klasyfikacji województw w zakresie wykorzystania energii elektrycznej w sektorach ekonomicznych wykorzystano metodę analizy wielowymiarowej, która przyporządkowuje województwa do odpowiednich grup (skupień) o zbliżonej ilości zużycia energii elektrycznej.
The most crucial factor influencing economic development and social well-being, as well as resulting in the mitigation of the effects of social poverty is electricity and its availability. The country’s growing economy generates an increasingly higher demand for energy. The individual Provinces of Poland have a different degree of electricity use in the basic economic sectors. The use of electricity is dependent on a number of factors, such as a given region’s degree of industrialisation, the locations of power plants, as well as the population and household numbers. The article presents the results of a comparative analysis of electricity consumption in the individual Provinces of Poland, with account being taken of the main economic sectors. The classification of the Provinces in terms of electricity use in economic sectors was performed by means of a multi-dimensional analysis method, which assigns the Provinces to appropriate groups (clusters) having similar quantities of electricity consumed.
Źródło:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska; 2018, 117; 675-686
1641-3466
Pojawia się w:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical analysis of influence of exogenous fire in dog heading on parameters of the air stream flowing through this heading
Analiza numeryczna pożaru egzogenicznego w wyrobisku korytarzowym na parametry strumienia przepływającego przez to wyrobisko
Autorzy:
Tutak, M.
Powiązania:
https://bibliotekanauki.pl/articles/1205769.pdf
Data publikacji:
2014
Wydawca:
STE GROUP
Tematy:
CFD
underground fire
belt conveyor fire
airflow
strumień powietrza
badania modelowe
ANSYS Fluent
ognisko pożaru
Opis:
Flow of ventilation air stream through the dog heading with a fire centre is the flow with complex character, during which as a result of emission of fire gases into the mining atmosphere, there occur to disturbances of its flow. In the paper there is presented a numerical analysis of an influence of exogenous fire in a dog heading, on the parameters of the ventilation air stream flowing through this heading. Modeling tests were carried out with a use of ANSYS software, basing on the Finite Volume Method. For the made assumptions, there were determined physical parameters of air stream flowing through the heading with a fire centre, and also changes in mass fraction of gases in this stream during its flow through the analyzed heading: oxygen, carbon monoxide and carbon dioxide. As a result of performed analysis over the fire centre, the local increase of velocity and temperature and violent decrease of static pressure were recorded. Model of heading presented in the paper gives possibilities for development, and then the analysis of more complicated problems in a range of ventilation of mining headings.
Przepływ strumienia powietrza wentylacyjnego przez wyrobisko korytarzowe z ogniskiem pożaru jest przepływem o złożonym charakterze, podczas którego, w wyniku wydzielania się do atmosfery kopalnianej gazów pożarowych, dochodzi do zaburzeń jego przepływu. W artykule przedstawiono analizę numeryczną wpływu pożaru egzogenicznego w wyrobisku korytarzowym na parametry strumienia powietrza wentylacyjnego przepływającego przez to wyrobisko. Badania modelowe przeprowadzono przy wykorzystaniu programu Ansys Fluent, bazującym na metodzie objętości skończonych. Dla przyjętych założeń wyznaczono parametry fizyczne strumienia powietrza przepływającego przez wyrobisko z ogniskiem pożaru, a także zmiany udziałów masowych gazów w tym strumieniu podczas jego przepływu przez analizowane wyrobisko: tlenu oraz tlenku węgla i dwutlenku węgla. W wyniku przeprowadzonej analizy nad ogniskiem pożaru zanotowano lokalny przyrost prędkości i temperatury oraz gwałtowny spadek ciśnienia statycznego. Zaprezentowany w artykule model wyrobiska daje możliwości rozbudowy, a następnie analizy bardziej skomplikowanych zagadnień z zakresu wentylacji wyrobisk górniczych.
Źródło:
Management Systems in Production Engineering; 2014, 2 (14); 76-80
2299-0461
Pojawia się w:
Management Systems in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of Model-Based Tests for Analysing the Consequences of Mine Fires
Autorzy:
Tutak, M.
Powiązania:
https://bibliotekanauki.pl/articles/2064980.pdf
Data publikacji:
2018
Wydawca:
STE GROUP
Tematy:
mine fires
methane combustion
numerical analysis
Opis:
One of the most common and most dangerous hazards in underground coal mines is fire hazard. Mine fires can be exogenous or endogenous in nature. In the case of the former, a particular hazard is posed by methane fires that occur in dog headings and longwalls. Endogenous and exogenous fires are large hazard for working crew in mining headings and cause economics losses for mining plants. Mine fires result in emission of harmful chemical products and have a crucial impact on the physical parameters of the airflow. The subject of the article concerns the analysis of the consequences of methane fires in dog headings. These consequences were identified by means of model-based tests. For this purpose, a model was developed and boundary conditions were adopted to reflect the actual layout of the headings and the condition of the atmosphere in the area under analysis. The objective of the test was to determine the effects of methane fires on the chemical composition of the atmosphere and the physical parameters of the gas mixture generated in the process. The results obtained clearly indicate that fires have a significant impact on the above-mentioned values. The paper presents the distributions for the physical parameters of the resulting gas mixture and the concentration of fire gases. Moreover, it shows the distributions of temperature and oxygen concentration levels in the headings under analysis. The methodology developed for the application of model-based tests to analyse fire events in mine headings represents a new approach to the problem of investigating the consequences of such fires. It is also suitable for variant analyses of the processes related to the ventilation of underground mine workings as well as for analyses of emergency states. Model-based tests should support the assessment of the methane hazard levels and, subsequently, lead to an improvement of work safety in mines.
Źródło:
Multidisciplinary Aspects of Production Engineering; 2018, 1, 1; 767--774
2545-2827
Pojawia się w:
Multidisciplinary Aspects of Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie CFD do określenia wpływu systemu przewietrzania ściany eksploatacyjnej na położenie i zasięg strefy szczególnego zagrożenia pożarami endogenicznymi w zrobach zawałowych
The using CFD to determine the impact of ventilation systems on the location a zone particularly endangered by endogenous fires in longwall goaf
Autorzy:
Tutak, M.
Powiązania:
https://bibliotekanauki.pl/articles/113293.pdf
Data publikacji:
2017
Wydawca:
STE GROUP
Tematy:
CFD
pożar endogeniczny
ściana eksploatacyjna
zroby zawałowe
przepływ powietrza
endogenous fire
longwall
rockfall goaves
air flow
Opis:
Podczas przewietrzania ścian eksploatacyjnych występuje migracja części strumienia powietrza do zrobów zawałowych. W przypadku gdy w zrobach tych znajdzie się węgiel skłonny do samozapalenia, to przepływ powietrza przez te zroby może wpłynąć na powstanie w nich sprzyjających warunków do utleniania się węgla, a w dalszej kolejności do jego samozagrzewania i samozapłonu. Powstający w takich warunkach pożar endogeniczny może stanowić poważne zagrożenie dla załogi oraz ciągłości ruchu zakładu górniczego. W artykule przedstawiono wyniki analizy numerycznej przepływu strumienia powietrza przez zroby ścian zawałowych przewietrzanych systemami na „U” od granic oraz na „Y”. Celem tej analizy było wyznaczenie w zrobach strefy szczególnego zagrożenia pożarami endogenicznymi. Dla określonych warunków górniczo-geologicznych wyznaczono krytyczne wartości prędkości przepływu powietrza i stężenia tlenu w zrobach, warunkujące rozpoczęcie procesu utleniania węgla.
In underground coal-mining during ventilating of operating longwalls takes place migration of parts of airflow to rockfall goaves. In a case when in these goaves a coal susceptible to self-ignition occurs, then the airflow through these goaves may influence on formation of favorable conditions for coal oxidation and subsequently to its self-heating and self-ignition. Endogenous fire formed in such conditions can pose a serious hazards for the crew and for continuity of operation of mining plant. In the paper results of numerical analysis of airflow through rockfall goaves ventilated in “U-type” from boundaries system and „Y-type” are presented. The aim of the analysis was to determine in these goaves a zone particularly endangered by endogenous fıres. For determined mining-geological conditions, the critical value of velocity of airflow and oxygen concentration in goaves, conditioning initiation of coal oxidation process were determined.
Źródło:
Systemy Wspomagania w Inżynierii Produkcji; 2017, 6, 3; 257-273
2391-9361
Pojawia się w:
Systemy Wspomagania w Inżynierii Produkcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The preliminary analysis of distribution of the velocity field and air pressure flowing throught the mining headings with different geometry of cross-section
Wstępna analiza rozkładu pola prędkości i ciśnienia powietrza przepływającego przez wyrobiska górnicze o różnej geometrii przekroju poprzecznego
Autorzy:
Tutak, M.
Powiązania:
https://bibliotekanauki.pl/articles/1206477.pdf
Data publikacji:
2013
Wydawca:
STE GROUP
Tematy:
airflow
velocity
static pressure
geometry of cross-section
computational fluid dynamics (CFD)
przepływ powietrza
prędkość
ciśnienie statyczne
geometria wyrobisk
metoda objętości skończonych
Opis:
The basic meaning for the security of persons working in underground mining heading heir ventilation of headings. Providing the fresh air into the active mining heading is a fundamental task of ventilation service in the mine. Very significant impact on the efficiency of the ventilation process has the physical parameters of supplied airflow, such as its amount, speed and pressure. These parameters can be determined based on the "in situ" tests or modeling tests. Carrying out the tests in underground conditions is very expensive and not always available due to exploitation. As an alternative, in such cases the modeling tests can be used, which give more possibilities of analysis the impact of differentials factors on the studied parameters. In the paper there is presented results of modeling of airflow in mining heading, obtained basing on the numerical simulations with use of finite volume method in ANSYS Fluent software. The physical models of headings were prepared basing on the real cross sections of the dog headings. To find the solution of the mathematical model, the k-ε turbulence model was used.
Podstawowe znaczenie dla bezpieczeństwa osób pracujących w podziemnych wyrobiskach górniczych ma ich przewietrzanie. Dostarczenie świeżego powietrza do czynnych wyrobisk górniczych jest podstawowym zadaniem służb wentylacyjnych w kopalni. Bardzo istotny wpływ na skuteczność procesu przewietrzania mają parametry fizyczne dostarczanego strumienia powietrza takie jak jego ilość, prędkość oraz ciśnienie. Parametry te można wyznaczyć na podstawie badań w warunkach „in situ” lub badań modelowych. Przeprowadzenie badań w warunkach dołowych jest bardzo kosztowne i nie zawsze możliwe ze względu na prowadzoną eksploatację. Jako alternatywne w takich przypadkach można wykorzystać badania modelowe, które stwarzają większe możliwości analizy wpływu różnych czynników na badane parametry. W artykule przedstawiono wyniki badań modelowych przepływu strumienia powietrza w wyrobisku górniczym uzyskanych na podstawie symulacji opartych o metodę objętości skończonej w programie ANSYS Fluent. Analizę przeprowadzono dla trójwymiarowego strumienia przepływu powietrza. Modele fizyczne wyrobisk opracowano w oparciu o rzeczywiste przekroje poprzeczne wyrobisk korytarzowych. Do rozwiązania modelu matematycznego wykorzystano model turbulencji k-ε.
Źródło:
Management Systems in Production Engineering; 2013, 3 (11); 43-48
2299-0461
Pojawia się w:
Management Systems in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the Scale of Methane Hazard in Polish Hard Coal Mines
Autorzy:
Tutak, M.
Powiązania:
https://bibliotekanauki.pl/articles/2064941.pdf
Data publikacji:
2018
Wydawca:
STE GROUP
Tematy:
coal mine
methane emission
cluster analysis
hazard
environmental
Opis:
In the majority of Polish mines, the exploitation of hard coal is accompanied by the release of considerable amounts of methane. Being flammable and explosive, methane may form an explosive mixture with air once it appears in mine workings. For this reason, the methane hazard is recognised as one of the ventilation risks in the mining industry. This process leads to the formation of air and methane mixture, whose considerable amounts permeate into the atmosphere and the natural environment. This phenomenon is extremely unfavourable because methane is, besides carbon dioxide, yet another gas that exacerbates the greenhouse effect. For this reason, it is increasingly more common to equip mines with methane collection systems in the process of demethylation. These play a vital role for both the natural environment and the safety of work in mines. A reduction of the methane content in headings increases the safety of the working crew and enhances the effectiveness of mining production. The article presents an analysis of the methane-related hazard based on methane emissions during mining exploitation. The analysis was based on the data concerning the amount of methane emitted into the atmosphere and collected by methane extraction systems from 16 coal mines. It led to identification of homogenous mines with similar values of the absolute methane-bearing capacity and ventilation methane-bearing capacity as well as with similar amounts of methane collected by methane extraction systems. The analysis was performed using the non-hierarchical k-average method, which belongs to the group of algorithms for analysing clusters. As a result, the mines were divided into the assumed number of groups. The results obtained made it possible to determine a group of mines in which, in the Author’s opinion, similar systems can be applied for controlling and reducing the methane hazard. These results also open up numerous possibilities for undertaking joint business ventures by the mines in terms of using the collected methane and implementing preventive measures.
Źródło:
Multidisciplinary Aspects of Production Engineering; 2018, 1, 1; 801--807
2545-2827
Pojawia się w:
Multidisciplinary Aspects of Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numeryczna mechanika płynów (CFD) w ocenie zagrożenia metanowego wyrobisk górniczych
The use of CFD for assessment methane hazard
Autorzy:
Tutak, M.
Powiązania:
https://bibliotekanauki.pl/articles/112558.pdf
Data publikacji:
2017
Wydawca:
STE GROUP
Tematy:
zagrożenie metanowe
wyrobisko ścianowe
pomocnicze urządzenia wentylacyjne
numeryczna mechanika płynów
methane hazard
longwall
auxiliary ventilation
CFD
Opis:
Jednym z powszechnie występujących zagrożeń gazowych w kopalniach węgla kamiennego, jest zagrożenie metanowe. Rejonem najbardziej narażonym na to zagrożenie, przy przewietrzaniu ściany systemem na ‘U” od granic jest skrzyżowanie ściany z chodnikiem wentylacyjnym (tzw. górne naroże ściany). Gromadzenie się metanu w tym miejscu jest wynikiem jego wypływu ze zrobów zawałowych. Dlatego też w celu zmniejszenia stężenia metanu w tym rejonie stosuje się pomocnicze urządzenia wentylacyjne. Mają one za zadanie doprowadzić do tego miejsca taką ilość świeżego powietrza, aby rozrzedzić niebezpieczne stężenie metanu. Proces ten nazywany jest doświeżaniem i ma na celu przewietrzenie górnego naroża ściany. W artykule zaprezentowano wyniki badań numerycznych rozkładu stężenia metanu w zagrożonym obszarze (górne naroże ściany). Badania modelowe przeprowadzono w oparciu o rzeczywiste dane z eksploatowanego pokładu węgla kamiennego.
One of the commonly present gas hazard in hard coal mines methane hazard. The most endangered region by this hazard, during ventilation of longwall in „U from boundaries” system is the crossing with ventilation roadway (so called “upper corner of longwall”). Accumulation of methane in this place results from its release from goaf. Therefore, in order to decrease methane concentration in this region, auxiliary ventilation devices are used. In the paper results of numerical studies of distribution of methane concentration in hazardous zone (upper corner of longwall) are presented. The obtained results clearly show that numerical methods, combined with the results of tests in real conditions can be successfully used for the analysis of variants of processes related to ventilation of underground mining, and also in the analysis of emergency states.
Źródło:
Systemy Wspomagania w Inżynierii Produkcji; 2017, 6, 7; 255-266
2391-9361
Pojawia się w:
Systemy Wspomagania w Inżynierii Produkcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Symulacja numeryczna jako narzędzie wspomagające ocenę zagrożenia metanowego w kopalni węgla kamiennego
Numerical simulation as an instrument of supporting assessments methane hazard in coal mine
Autorzy:
Brodny, J.
Tutak, M.
Powiązania:
https://bibliotekanauki.pl/articles/324339.pdf
Data publikacji:
2017
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
zagrożenie metanowe
bezpieczeństwo pracy
symulacja numeryczna
methane hazard
work safety
numerical simulation
Opis:
Jednym z narzędzi, które mogą być wykorzystane w procesie oceny stanu zagrożenia metanowego, są symulacje numeryczne z wykorzystaniem metody objętości skończonych. Wykorzystując tę metodę, w artykule dokonano analizy rozkładu stężenia metanu w obszarze objętym eksploatacją górniczą. Obszar ten objął wyrobisko ścianowe wraz z wyrobiskami przyległymi oraz zroby zawałowe potraktowane jako ośrodek porowaty. Na podstawie uzyskanych wyników określono potencjalne stężenia metanu na wylocie ze ściany eksploatacyjnej oraz w zrobach zawałowych. Wyniki te powinny stanowić istotne źródło informacji dla oceny stanu zagrożenia metanowego.
One of the tools, which can be used in the process of assessment of methane hazard state, are numerical simulations based on the Finite Volume Method. Using this method, in the paper an analysis of the decrease in the methane concentration in the area of conducted mining exploitation were performed. This area included longwall heading together with adjacent headings and rockfall goaves. Based on the obtained results potential methane concentration at the outlet from the mining heading and rockfall goaves was determined. These results should be an important source of information for the assessment of the methane hazard state.
Źródło:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska; 2017, 100; 45-59
1641-3466
Pojawia się w:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena ryzyka wybuchu pyłu węglowego w rejonie ściany eksploatacyjnej
Risk assessment of coal dust explosion in the region of mining longwall
Autorzy:
Tutak, M.
Brodny, J.
Powiązania:
https://bibliotekanauki.pl/articles/321365.pdf
Data publikacji:
2017
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
ryzyko
zagrożenie
pył węglowy
wybuch
wyrobisko górnicze
risk
hazard
coal dust
explosion
mining excavation
Opis:
Jednym z bardziej niebezpiecznych zagrożeń występujących w krajowym i światowym podziemnym górnictwie węgla kamiennego jest zagrożenie wybuchem pyłu węglowego. Wystąpienie takiego wybuchu pociąga za sobą ogromne straty materialne oraz jest bardzo niebezpieczne dla załogi. Bardzo istotne znaczenie dla ograniczenia możliwości wystąpienia takich zdarzeń mają działania profilaktyczne, których prowadzenie powinno być poprzedzone rzetelną oceną ryzyka wystąpienia wybuchu pyłu węglowego. W artykule omówiono mechanizm powstawania i rozwoju wybuchu pyłu węglowego. Scharakteryzowano czynniki, jakie muszą być spełnione, aby doszło do wybuchu oraz przedstawiono założenia metody oceny ryzyka wystąpienia wybuchu pyłu węglowego. Przedstawiono także praktyczny przykład wyznaczenia wskaźnika ryzyka wystąpienia wybuchu pyły węglowego w rejonie ściany eksploatacyjnej. Przedstawiona metodyka zdaniem autorów powinna znaleźć szerokie zastosowanie w praktyce górniczej.
One of the most dangerous natural hazards occurring in the world and domestic underground hard coal mining is coal dust explosion hazard, being a side product of coal mining process. Occurrence of such explosions brings huge material losses and is very dangerous for the crew. Very significant meaning for the limitation of possibility of occurrence of such events have prophylactic actions, which should be preceded with reliable assessment of the explosion occurrence risk. In the paper, a mechanism of formation and development of coal dust explosion in the region of mining longwall was described. There were characterized conditions which has to be fulfilled to explosion could occur, and assumptions of method of risk assessment of such explosion was presented. Also a practical example of determination of risk index of coal dust explosion occurrence in the region of mining longwall was presented. Presented methodology, in the opinion of authors, should have found a broad application in the mining practice.
Źródło:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska; 2017, 100; 523-538
1641-3466
Pojawia się w:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical analysis of airflow and methane emitted from the mine face in a blind dog heading
Analiza numeryczna przepływu strumienia powietrza i wydzielającego się metanu z czoła przodka w ślepym wyrobisku korytarzowym
Autorzy:
Brodny, J.
Tutak, M.
Powiązania:
https://bibliotekanauki.pl/articles/1206324.pdf
Data publikacji:
2015
Wydawca:
STE GROUP
Tematy:
methane hazard
ventilation of dog headings
numerical analysis
zagrożenie metanowe
wentylacja wyrobisk korytarzowych
analiza numeryczna
Opis:
Ventilation is one of the most common presented problems during the driving of dog headings. During driving such heading has only one connection with air stream routes, which significantly make difficult the process of its ventilation. In a case of its driving in coal in the methane seam, this heading is endangered also to methane emission. In such case process of its ventilation is much more difficult. In the paper there are presented results of numerical analysis of ventilation of blind dog headings using air-duct forcing the air into its mine face. The analysis was performed for four different velocities of the air at the outlet from air-duct. The calculations were made for the excavation of heading with heading machine and conveyor belt.
Jednym z większych problemów występujących w czasie drążenia podziemnych wyrobisk korytarzowych jest ich przewietrzanie. W trakcie wykonywania wyrobisko takie posiada tylko jedno połączenie z drogami przepływu świeżego strumienia powietrza, co istotnie utrudnia proces jego przewietrzania. W przypadku jego drążenia w węglu w pokładzie metanowym, wyrobisko to narażone jest także na wydzielanie się metanu. W takim przypadku proces jego przewietrzania jest jeszcze bardziej utrudniony. W artykule przedstawiono wyniki analizy numerycznej przewietrzania ślepego wyrobiska korytarzowego z wykorzystaniem lutniociągu tłoczącego świeże powietrze do jego przodka. Analizę przeprowadzono dla czterech różnych prędkości wyloty powietrza z lutniociągu. Obliczenia wykonano dla wyrobiska z kombajnem chodnikowym i przenośnikiem taśmowym.
Źródło:
Management Systems in Production Engineering; 2015, 2 (18); 110-118
2299-0461
Pojawia się w:
Management Systems in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of the zone endangered by methane explosion in goaf with caving of longwalls ventilated on „Y” system
Wyznaczenie strefy zagrożonej wybuchem metanu w zrobach zawałowych ściany eksploatacyjnej przewietrzanej systemem na „Y”
Autorzy:
Brodny, J.
Tutak, M.
Powiązania:
https://bibliotekanauki.pl/articles/1206505.pdf
Data publikacji:
2016
Wydawca:
STE GROUP
Tematy:
internet marketing
internet of things (IoT)
advertising
zagrożenie metanowe
zroby zawałowe
CFD
ANSYS Fluent
Opis:
One of the most dangerous and most commonly present risks in hard coal mines is methane hazard. During exploitation by longwall system with caving, methane is emitted to mine heading from the mined coal and coal left in a pile. A large amount of methane also flows from neighboring seams through cracks and fissures formed in rock mass. In a case of accumulation of explosive methane concentration in goaf zone and with appropriate oxygen concentration and occurrence of initials (e.g. spark or endogenous fire), it may come to the explosion of this gas. In the paper there are presented results of numerical analysis of mixture of air and methane streams flow through the real heading system of a mine, characterized by high methane hazard. The aim of the studies was to analyze the ventilation system of considered heading system and determination of braking zones in goaf zone, in which dangerous and explosive concertation of methane can occur with sufficient oxygen concentration equal to at least 12%. Determination of position of these zones is necessary for the selection of appropriate parameters of the ventilation system to ensure safety of the crew. Analysis of the scale of methane hazard allows to select such a ventilation system of exploitation and neighboring headings that ensures chemical composition of mining atmosphere required by regulation, and required efficiency of methane drainage. The obtained results clearly show that numerical methods, combined with the results of tests in real conditions can be successfully used for the analysis of variants of processes related to ventilation of underground mining, and also in the analysis of emergency states.
ednym z najbardziej niebezpiecznych i najczęściej występujących zagrożeń w kopalniach węgla kamiennego jest zagrożenie metanowe. Przy eksploatacji systemem ścianowym z zawałem skał, metan wydziela się do wyrobisk górniczych z urabianego oraz pozostawionego w zawale węgla. Duża ilość metanu dopływa także z pokładów sąsiednich przez powstałe w górotworze szczeliny i spękania. W przypadku nagromadzenia się metanu o stężeniu wybuchowym w zrobach zawałowych i przy odpowiednim stężeniu tlenu oraz wystąpieniu inicjału (np. iskra lub pożar endogeniczny), może dojść do wybuchu tego gazu. W artykule przedstawiono wyniki analizy numerycznej przepływu mieszaniny strumienia powietrza i metanu przez rzeczywisty układ wyrobisk jednej z kopalń, charakteryzującej się dużym zagrożeniem metanowym. Celem badań była analiza systemu wentylacyjnego rozpatrywanego układu wyrobisk oraz wyznaczenie w zrobach ściany zawałowej stref, w których mogą wystąpić niebezpieczne, wybuchowe stężenia metanu przy dostatecznym stężeniu tlenu wynoszącym min. 12%. Wyznaczenie położenia takich stref jest konieczne dla doboru odpowiednich parametrów systemu wentylacyjnego w celu zapewnienia bezpieczeństwa pracy załogi. Analiza skali zagrożenia metanowego pozwala na dobranie takiego systemu przewietrzania ściany eksploatacyjnej i sąsiednich wyrobisk, który zapewni wymagany przepisami skład chemiczny atmosfery kopalnianej, a także wymaganą efektywność procesu odmetanowania. Uzyskane rezultaty jednoznacznie dowodzą, iż metody numeryczne, w połączeniu z wynikami badań w warunkach rzeczywistych mogą z powodzeniem być stosowane do wariantowych analiz procesów związanych z przewietrzaniem podziemnych wyrobisk górniczych, a także w analizach stanów awaryjnych.
Źródło:
Management Systems in Production Engineering; 2016, 4 (24); 247-251
2299-0461
Pojawia się w:
Management Systems in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie numerycznej mechaniki płynów do analizy przepływu strumienia powietrza przez wyrobisko górnicze z ogniskiem pożaru
Autorzy:
Brodny, J.
Tutak, M.
Powiązania:
https://bibliotekanauki.pl/articles/164886.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
przepływ powietrza
pożar podziemny
analiza numeryczna
airflow
underground fire
numerical analysis
Opis:
Przepływ strumienia powietrza przez wyrobiska górnicze z ogniskiem pożaru jest przepływem o złożonym charakterze. Wydzielanie się do atmosfery kopalnianej gazów pożarowych powoduje duże zaburzenia tego przepływu. W artykule przedstawiono wyniki analizy numerycznej wpływu pożaru egzogenicznego w ścianie eksploatacyjnej na parametry strumienia powietrza przepływającego przez to wyrobisko oraz wyrobiska przyścianowe. Analizę przeprowadzono wykorzystując programu Ansys Fluent, bazujący na metodzie objętości skończonych. Dla przyjętych założeń wyznaczono parametry fizyczne strumienia powietrza przepływającego przez ścianę eksploatacyjną z ogniskiem pożaru i wyrobiska przyścianowe, a także zmiany udziałów masowych gazów (tlenu oraz tlenku węgla i dwutlenku węgla) w tym strumieniu podczas przepływu przez analizowany układ wyrobisk dla różnych prędkości na wlocie.
The airflow through excavations with fire source is very complex. The release of fire gases to the atmosphere of a mine significantly disturbs the airflow. This paper presents the results of numerical analysis of the influence of the exogenic fire in longwall on the parameters of air flowing through this excavation and main excavations. The analysis was performed by the use of Ansys Fluent program which is based of the Finite Volume Method (FVM). For the assumption made, physical parameters of the airflow through longwall with the source of fire and main excavations as well as changes in mass fraction of gases (oxygen and carbon monoxide and carbon dioxide) in the air stream during its flow through the analyzed system of excavations for different inlet velocities.
Źródło:
Przegląd Górniczy; 2015, 71, 2; 20-28
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wentylacyjne zagrożenia skojarzone w górnictwie podziemnym węgla kamiennego
Associated ventilation hazards in underground mining of hard coal
Autorzy:
Syty, J.
Brodny, J.
Tutak, M.
Powiązania:
https://bibliotekanauki.pl/articles/321808.pdf
Data publikacji:
2017
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
profilaktyka
zagrożenie pożarami endogenicznymi
zagrożenie metanowe
prevention
spontaneous combustion hazard
methane hazard
Opis:
W podziemnym górnictwie węglowym występuje szereg zagrożeń naturalnych, które w sposób istotny wpływają na efektywność oraz bezpieczeństwo procesu eksploatacji. Do najbardziej niebezpiecznych naturalnych zagrożeń w tej branży należą zagrożenia wentylacyjne. Zaliczamy do nich m.in. zagrożenie metanowe i zagrożenie pożarami endogenicznymi. W praktyce dość często zdarza się, iż zagrożenia te występują jednocześnie, w takim przypadku mamy do czynienia z zagrożeniami skojarzonymi. W artykule scharakteryzowano te zagrożenia oraz dokonano ich analizy dla przykładowej rzeczywistej ściany eksploatacyjnej, w której oba badane zagrożenia występują jednocześnie. Dla ściany tej przedstawiono także sposoby działań profilaktycznych w zakresie obu występujących zagrożeń. Przedstawione materiały mogą stanowić istotne źródło informacji dla służb odpowiedzialnych za bezpieczeństwo wentylacyjne w przedsiębiorstwach górniczych.
In the underground coal mining the series of natural hazards occur, which in a significant way influence on the effectiveness and safety of exploitation process. Ventilation hazards belongs to the most dangerous natural hazards in this industry branch. One can include to them the hazards of methane and endogenous fires. In practice quite often it happens, that these hazards occur simultaneously and in such a case we deal with the associated hazards. In the paper these hazards are characterized and analyzed in example of real exploitation longwall, in which both investigated hazards occur simultaneously. For this wall also the ways of preventive actions in a range of both exiting hazards are presented. Materials presented here could be an important source of information for the emergency service responsible for ventilation safety in mining enterprises.
Źródło:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska; 2017, 100; 441-456
1641-3466
Pojawia się w:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Availability analysis of selected mining machinery
Autorzy:
Brodny, J.
Alszer, S.
Krystek, J.
Tutak, M.
Powiązania:
https://bibliotekanauki.pl/articles/230103.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
OEE model
TPM strategy
effectiveness
mining machines
Opis:
Underground extraction of coal is characterized by high variability of mining and geological conditions in which it is conducted. Despite ever more effective methods and tools, used to identify the factors influencing this process, mining machinery, used in mining underground, work in difficult and not always foreseeable conditions, which means that these machines should be very universal and reliable. Additionally, a big competition, occurring on the coal market, causes that it is necessary to take action in order to reduce the cost of its production, e.g. by increasing the efficiency of utilization machines. To meet this objective it should be pro-ceed with analysis presented in this paper. The analysis concerns to availability of utilization selected mining machinery, conducted using the model of OEE, which is a tool for quantitative estimate strategy TPM. In this article we considered the machines being part of the mechanized longwall complex and the basis of analysis was the data recording by the industrial automation system. Using this data set we evaluated the availability of studied machines and the structure of registered breaks in their work. The results should be an important source of information for maintenance staff and management of mining plants, needed to improve the economic efficiency of underground mining.
Źródło:
Archives of Control Sciences; 2017, 27, 2; 197-209
1230-2384
Pojawia się w:
Archives of Control Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies