Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Tian, Yu" wg kryterium: Autor


Wyświetlanie 1-9 z 9
Tytuł:
Influence of montmorillonite hydration and delamination on coal flotation
Autorzy:
Zhang, Lucheng
Zhang, Mingqing
Liu, Qi
Song, Shuoshuo
Tian, Yu
Barvora, Joshua Bosco
Powiązania:
https://bibliotekanauki.pl/articles/2175432.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coal flotation
montmorillonite
hydration
delamination
slime coating
Opis:
In this study, the influence of montmorillonite (MT) hydration and delamination on coal flotation was investigated through flotation tests using coal-MT mixtures. MT particles were subjected to hydration at different time intervals. The Fuerstenau upgrading curve was plotted to evaluate the change in overall flotation selectivity. The zeta potential and particle size distribution were used to characterize the delamination behavior of MT in deionized water at natural pH level. Atomic force microscopy (AFM) (colloidal probe) was used to analyze the interaction force between coal and MT particles. It was found that smaller particles (individual silicate layers or thin packets of layers) with higher zeta potentials appeared gradually, and their volume proportion increased with increasing hydration time. AFM results showed that a monotonous repulsive force was detected consistently throughout the separation distance between coal and these emerging smaller MT particles. The decrease of these MT coating on coal surface was responsible for the higher flotation recovery and better selectivity. A jump-into-contact phenomenon was observed in coal and MT interaction when MT hydrated incompletely. It showed that heterocoagulation between coal and MT occurred and MT coating on the coal surface was responsible for the depression of flotation.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 6; art. no. 153085
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Shoulder girdle muscle activity and fatigue during automobile chassis repair
Autorzy:
Tian, Baozhen
Yu, Suihuai
Chu, Jianjie
Li, Wenhua
Powiązania:
https://bibliotekanauki.pl/articles/2161964.pdf
Data publikacji:
2019-07-15
Wydawca:
Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Tematy:
muscle activity
surface electromyography
muscle fatigue
perceived level of discomfort
automobile chassis repair
shoulder postures
Opis:
Objectives The objective of this study was to assess the postures that were commonly used in automobile chassis repair operations, and to evaluate shoulder girdle muscle fatigue for different combinations of the weight of hand-tools. Material and Methods Two right muscles, including upper trapezius (UT) and middle deltoid (MD), were selected. Surface electromyography (SEMG) and a perceived level of discomfort (PLD) were used to assess the degree of shoulder girdle fatigue. Fifteen healthy young male subjects from the Northwestern Polytechnical University participated in the test. The test consisted of assuming 4 different postures and maintaining each of them for 60 s. The 4 postures varied in terms of dumbbell weights, standing for the hand-tools weight: W1 was 0.48 kg and W2 was 0.75 kg; the 4 shoulder postures were shoulder flexions of 150°, 120°, 90°, and 60°, combined with an included elbow angle of 180°, 150°, 120° and 90°, respectively. The experimental sequences were randomly selected. The signals of SEMG and the values of PLD in the shoulder girdle were recorded in 60 s. All subjects completed the whole test. The repeated measure analysis of variance (ANOVA) was performed to ascertain differences between dumbbell weight (0.48 kg and 0.75 kg) and shoulder postures (150°/180°, 120°/150°, 90°/120° and 60°/90°). The Friedman test was utilized to determine the significant differences for UT(PLD) and MD(PLD) on shoulder postures. Spearman’s correlation was used to analyze the relationship between the subjective and objective measurements. Results Significant correlational relationships existed between the UT percentage of the maximal voluntary electrical activation (%MVE) and UT(PLD) (r = 0.459, p < 0.01), between MD(%MVE) and MD(PLD) (r = 0.821, p < 0.01). The results showed that SEMG and PLD of the 4 postures under analysis differed significantly (p < 0.05). Conclusions It was indicated that posture T4 (shoulder forward flexion 60° and included elbow angle 90°) resulted in the lowest fatigue, both in terms of the objective measure and the subjective perception, which meant that this posture was more ergonomic. Int J Occup Med Environ Health. 2019;32(4):537–52
Źródło:
International Journal of Occupational Medicine and Environmental Health; 2019, 32, 4; 537-552
1232-1087
1896-494X
Pojawia się w:
International Journal of Occupational Medicine and Environmental Health
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of a rapid immunochromatographic assay for detection of antibodies against porcine epidemic diarrhea virus
Autorzy:
Li, R.
Ma, J.
Tian, X.
Yu, Y.
Qiao, S.
Wang, Z.
Powiązania:
https://bibliotekanauki.pl/articles/2087760.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
porcine epidemic diarrhea virus
immunochromatographic test strip
nucleocapsid protein
diagnosis
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 1; 139-147
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dose-effect relationship on anti-inflammatory activity on LPS induced RAW 264.7 cells and antioxidant activity of rutin in vitro
Autorzy:
tian, chunlian
guo, yuru
chang, yu
zhao, jihang
cui, cancan
liu, mingchun
Powiązania:
https://bibliotekanauki.pl/articles/895707.pdf
Data publikacji:
2019-06-28
Wydawca:
Polskie Towarzystwo Farmaceutyczne
Tematy:
antioxidant
Anti-inflammatory
lipopolysaccharide
rutin
dose-effect relationship
Opis:
Rutin, as a common flavonol glycoside, exists abundantly in many plants and exhibits various nutritional and pharmacological function. Current study focused on the dose-effect relationship of rutin on the anti-inflammatory and antioxidant activities in vitro against LPS-stimulated RAW 264.7 cells and free radicals or ferric-ion. This study evaluated the anti-inflammatory activity by observation cell morphological and determination of the content of NO, TNF-α, IL-1β and IL-6, and the phagocytic activity in LPS induced RAW 264.7 cells; and revealed the antioxidant activities via assay of DPPH radical scavenging capacity, ABTS radical scavenging capacity, and reducing power. The study indicated that 5, 10, 20, 50 and 100 μM of rutin all exhibited a better anti-inflammatory activity, in especial 50 and 100 μM. Meanwhile, it exerted a stronger antioxidant activities than BHT, and equivalent to VC at the same concentration. Combined, the results suggested that rutin will be a potential and important adjuvant in treatment of inflammatory diseases and oxidative stress.
Źródło:
Acta Poloniae Pharmaceutica - Drug Research; 2019, 76, 3; 511-522
0001-6837
2353-5288
Pojawia się w:
Acta Poloniae Pharmaceutica - Drug Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fault mode analysis and reliability optimization design of a mechanical interface based on cylindrical cam mechanisms
Autorzy:
Li, Jian-Hao
Liu, Zhi-Jie
Wang, Da-Peng
Tian, Yun
Zhao, Yu-Chong
Powiązania:
https://bibliotekanauki.pl/articles/1841922.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
mechanical interface
fault mode analysis
Monte Carlo simulation
reliability design
cylindrical cam mechanism
Opis:
The mechanical interface has the characteristics of low shock and vibration, and is emphasized in the aerospace and ocean engineering fields. In this paper, a mechanical interface based on coupled cylindrical cam mechanisms is designed. It can achieve the expected functions, but there exist faults in some times. The fault modes and causes of the interface are firstly analyzed. Then a design approach based on Monte Carlo simulation is presented for analyzing and optimizing its reliability. According to the fault modes, the performance functions of the interface are established for obtaining the optimal scheme. A case is given to illustrate the proposed method. The simulation results and the prototype experiments prove that the optimization scheme effectively improves the reliability of the interface, and has better performance than the original one.
Źródło:
Eksploatacja i Niezawodność; 2020, 22, 4; 715-723
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
ANTI-INFLAMMATORY ACTIVITY AND CYTOTOXICITY OF DIOSGENIN ON LIPOPOLYSACCHARIDES INDUCED RAW 264.7 CELLS
Autorzy:
ning, jing
chang, yu
wang, ruxia
lan, zhiwei
ru, qing
liu, mingchun
tian, chunlian
Powiązania:
https://bibliotekanauki.pl/articles/895615.pdf
Data publikacji:
2020-04-29
Wydawca:
Polskie Towarzystwo Farmaceutyczne
Tematy:
Diosgenin
Anti-inflammatory
lipopolysaccharides
cytotoxicity
phagocytosis ability  
Opis:
Diosgenin is a steroidal sapogenin compound, and possesses multiple biological activities including anti-inflammatory, anticancer, immunological regulation, and anti-aging. The current study focused on its anti-inflammatory activities and cytotoxicity by analysis of NO production, phagocytosis activity, secretion of TNF-α and IL-6 and cell viability in LPS-induced RAW 264.7 cells. An IC50 value of diosgenin of 2.8 μM was calculated for diosgenin by regression of cell viability from concentrations ranging from 0.01 to 25 μM; this indicated that 0.01, 0.02, 0.04 μM diosgenin could reduce phagocytic activity very significantly (p<0.01) in a dose-dependent manner with no cytotoxic effect on the LPS-induced RAW 264.7 cells. However, there was no significant effect on NO content and secretion of TNF-α and IL-6 after diosgenin treatment. The research revealed that low concentrations diosgenin can directly inhibit cells phagocytosis, with no effect on the release of inflammatory mediators and cytokines. This lays a foundation for screening for a safe dose in research and developent of derivatives and new formulation of diosgenin for its anti-inflammatory effect.
Źródło:
Acta Poloniae Pharmaceutica - Drug Research; 2020, 77, 2; 313-317
0001-6837
2353-5288
Pojawia się w:
Acta Poloniae Pharmaceutica - Drug Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Use of nanofiltration membranes to concentrate and recover leached aluminum from acidified water treatment sludge
Autorzy:
Cheng, W. P.
Chen, P. H.
Tian, D. R.
Yu, R. F.
Fu, C. H.
Powiązania:
https://bibliotekanauki.pl/articles/208030.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
water purification
nanofiltration
acidic solutions
leaching
roztwory kwaśne
oczyszczanie wody
nanofiltracja
ługowanie
glin
Opis:
The recovery of aluminum from water purification sludge is usually performed by making the solution acidic or basic. However, for economic reasons and reasons of safety, excessive doses of acid or base should not be utilized. Accordingly, the aluminum concentration in the leached solution is typically limited, thus the recovered aluminum cannot be directly reused as a coagulant. A nanofiltration (NF) membrane can be used in the acidic solution to concentrate high-valence metal ions. There-fore, in this work, H2SO4 was utilized to leach Al3+ ions from water purification sludge. Then, the Al3+ ion solution was concentrated using a low-price NF membrane. The effect of natural organic matter on the Al3+ ion concentrating efficiency in the filtration process has been elucidated. Experimental results reveal that Al3+ ions were effectively prevented from passing through the NF membrane, enabling a highly concentrated aluminum solution to be obtained. However, the presence of organic compounds may reduce the efficiency of the concentration of Al3+ ions in the solution.
Źródło:
Environment Protection Engineering; 2016, 42, 3; 19-32
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quantification of lower extremity physical exposures in various combinations of sit/stand time duration associated with sit-stand workstation
Autorzy:
Pei, Huining
Yu, Suihuai
Babski-Reeves, Kari
Chu, Jianjie
Qu, Min
Tian, Baozhen
Li, Wenhua
Powiązania:
https://bibliotekanauki.pl/articles/2164098.pdf
Data publikacji:
2017-05-16
Wydawca:
Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Tematy:
electromyography
ergonomic intervention
perceived level of discomfort
root mean square
body mass index
gender differences
Opis:
Background Sit-stand workstations are available for office work purposes but there is a dearth of quantitative evidence to state benefits for lower limb outcomes while using them. And there are no guidelines on what constitutes appropriate sit/stand time duration. The primary aim of this study has been to compare muscle activity and perceived discomfort in the lower extremity during various combinations of sit/stand time duration associated with a sit-stand workstation separately and to evaluate the effects of the sit-stand workstation on the lower extremity during the text entry task. Material and Methods During the 5 days, all participants completed a 2-h text entry task each day for various sit/stand time duration combinations as follows: 5/25 min, 10/20 min, 15/15 min, 20/10 min, 25/5 min. Lower extremity muscular exposure of 12 male and 13 female participants was collected at 8 sites by surface electromyography and body discomfort was calculated by a questionnaire under those 5 conditions. Results Results have demonstrated that lower extremity muscle activity has been significantly varied among the 5 sit/stand time duration groups. Perceived level of discomfort (PLD) has not differed significantly for 9 out of 10 body parts. Conclusions The muscle activity of the thigh region was influenced by sit/stand time duration significantly. Ergonomic exposures of lower extremity when using a sit-stand workstation were increased, particularly during the long time standing posture. Results indicate that body mass index (BMI) and gender were not significant factors in this study. Combination of sit/stand time duration 25/5 min appears to show positive effects on relief of muscle exposure of back of thigh in the shifts of sitting and standing work position. Med Pr 2017;68(3):315–327
Źródło:
Medycyna Pracy; 2017, 68, 3; 315-327
0465-5893
2353-1339
Pojawia się w:
Medycyna Pracy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Error analysis of the three-phase electrical energy calculation method in the case of voltage-loss failure
Autorzy:
Cheng, Han-miao
Wang, Zhong-dong
Cai, Qi-xin
Lu, Xiao-quan
Gao, Yu-xiang
Song, Rui-peng
Tian, Zheng-qi
Mu, Xiao-xing
Powiązania:
https://bibliotekanauki.pl/articles/221096.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
three-phase electrical energy meter
voltage-loss failure
voltage substitution
three-phase voltage unbalance
calculation error
Opis:
The single-phase voltage loss is a common fault. Once the voltage-loss failure occurs, the amount of electrical energy will not be measured, but it is to be calculated so as to protect the interest of the power supplier. Two automatic calculation methods, the power substitution and the voltage substitution, are introduced in this paper. Considering the lack of quantitative analysis of the calculation error of the voltage substitution method, the grid traversal method and MATLAB tool are applied to solve the problem. The theoretical analysis indicates that the calculation error is closely related to the voltage unbalance factor and the power factor, and the maximum calculation error is about 6% when the power system operates normally. To verify the theoretical analysis, two three-phase electrical energy metering devices have been developed, and verification tests have been carried out in both the lab and field conditions. The lab testing results are consistent with the theoretical ones, and the field testing results show that the calculation errors are generally below 0.2%, that is correct in most cases.
Źródło:
Metrology and Measurement Systems; 2019, 26, 3; 505-516
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-9 z 9

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies