Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Tan, J." wg kryterium: Autor


Tytuł:
High-Pressure Phase Transitions and Thermodynamic Behaviors of Cadmium Sulfide
Autorzy:
Tan, J.
Li, Y.
Ji, G.
Powiązania:
https://bibliotekanauki.pl/articles/1493632.pdf
Data publikacji:
2011-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
71.15.Mb
65.40.-b
Opis:
The pressure-induced phase transitions of cadmium sulfide semiconductor in both zinc-blende and wurtzite structures are investigated by ab initio plane-wave pseudopotential density functional theory with the local density approximation. On the basis of the fourth-order Birch-Murnaghan equation of state, the phase transition pressures $P_{t}$ are determined by the enthalpy criterion. It is found that the phase transitions occur at pressure of 2.57 GPa (zinc blende-rocksalt structure) and 2.60 GPa (wurtzite-rocksalt structure), respectively. The equilibrium structural parameters, elastic constants, and phase transition pressures are calculated and compared with the experimental data available and other theoretical results. According to linear-response approach, the thermodynamic properties such as the free energy, enthalpy, entropy, and heat capacity are also obtained successfully from the phonon density of state.
Źródło:
Acta Physica Polonica A; 2011, 120, 3; 501-506
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Elastic and Thermodynamic Properties of Anti-Perovskite Type Superconductor $MCNi_3$ (M = Zn, Cd)
Autorzy:
Duan, M.
Tan, J.
Ji, G.
Chen, X.
Zhu, J.
Powiązania:
https://bibliotekanauki.pl/articles/1535766.pdf
Data publikacji:
2010-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
71.15.Mb
62.20.D-
91.60.Gf
Opis:
The elastic and thermodynamic properties of the anti-perovskite superconductor $ZnCNi_3$ and $CdCNi_3$ are investigated by first-principles calculations. With the local density approximation as well as the generalized gradient approximation for exchange and correlation, the ground state properties and equation of state are obtained, which agree well with other theoretical calculations and experiments. Furthermore, by the elastic stability criteria, we predict that $ZnCNi_3$ and $CdCNi_3$ are not stable above 98.1 GPa and 196.5 GPa, respectively. The dependences of the heat capacity, thermal expansion coefficient, the Grüneisen parameter and bulk modulus ($B_{T}$ and $B_{S}$) on pressure and temperature for $ZnCNi_3$ and $CdCNi_3$ are also obtained successfully.
Źródło:
Acta Physica Polonica A; 2010, 118, 4; 652-658
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Theoretical Predictions of Lattice Parameters and Mechanical Properties of Pentaerythritol Tetranitrate under the Temperature and Pressure by Molecular Dynamics Simulations
Autorzy:
Tan, J.J.
Hu, C.
Li, Y.
Ge, N.
Chen, T.
Ji, G.
Powiązania:
https://bibliotekanauki.pl/articles/1033453.pdf
Data publikacji:
2017-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
molecular dynamics
lattice parameter
equation of state
elasticity
mechanical properties
Opis:
Molecular dynamics simulations with condensed-phase optimized molecular potentials for atomistic simulation studies force field are performed to investigate the structure, equation of state, and mechanical properties of high energetic material pentaerythritol tetranitrate. The equilibrium structural parameters, pressure-volume relationship and elastic constants at ambient conditions agree excellently with experiments. In addition, fitting the pressure-volume data to the Birch-Murnaghan or Murnaghan equation of state, the bulk modulus B₀ and its first pressure derivative B'₀ are obtained. Moreover, the elastic constants are calculated in the pressure range of 0-10 GPa at room temperature and in the temperature range of 200-400 K at the standard pressure, respectively. By the Voigt-Reuss-Hill approximation, the mechanical properties such as bulk modulus B, shear modulus G, and the Young modulus E are also obtained successfully. The predicted physical properties under temperature and pressure can provide powerful guidelines for the engineering application and further experimental investigations.
Źródło:
Acta Physica Polonica A; 2017, 131, 2; 318-323
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Frothers and gas dispersion: A review of the structure-property-function relationship
Autorzy:
Tan, Y. H.
Finch, J. A.
Powiązania:
https://bibliotekanauki.pl/articles/109942.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
frothers
alcohols
polyglycols
frother structure
mechanisms
Opis:
Over the past 20 years quantitative measures of frother functions have been developed to try to replace such qualitative descriptors as “weak” and “strong”. One of these metrics is the critical coalescence concentration (CCC) that quantifies a frother’s ability to reduce bubble size; another is the concentration at minimum velocity (CMV) that quantifies a frother’s ability to reduce bubble rise velocity. The experimental procedure for the two measures is briefly outlined and the measures are shown to be related. Using CMV, based on more than 50 surfactants from the two main frother families, alcohols and polyglycols, the frother structure-property-function link is investigated. The structure variables were: in alcohols, alkyl chain length, and position of the methyl branch and hydroxyl group(s); and in polyglycols, alkyl chain length, and number of propylene oxide (PO) or ethylene oxide (EO) groups. On the argument that low CMV represents the desired outcome, the main findings are: the dominant effect of alkyl chain length in both alcohols and polyglycols; that for alcohols branched-chain isomers are superior to straight chain, with the best combination being OH at the terminus and the methyl branch as far away as possible; and for polyglycols, PO-based are superior to EO-based. Interpretation of these observations included the effect of structure on the following properties: surface activity, mass transfer rate, H-bonding, and molecule packing.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 1; 40-53
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of pH and time on hydrodynamic properties of dodecylamine
Autorzy:
Zhou, X.
Tan, Y. H.
Finch, J. A.
Powiązania:
https://bibliotekanauki.pl/articles/109853.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
pH
dodecylamine
gas holdup
froth height
Frother function
Opis:
Gas holdup and froth height in the presence of dodecylamine (DDA, pKa = 10.63) are reported at three pH values. The results revealed a strong time effect for DDA: stability was reached at pH 3; not at natural pH, for example, gas holdup declining to the water only value; and at pH 11, while stability was reached quickly gas holdup was now less than in water alone indicating coalescence. In the first two cases, the time effect is attributed to loss of amine from the system as molecular amine, observed at natural pH as precipitates on the column wall. An argument for precipitation at pH < pKa is presented. At pH 11, coalescence is attributed to the oily nature of the molecular amine present as colloidal aggregates. Noting a difference in literature steady state gas holdup data at natural pH, it is speculated that varying steady states can be reached that corresponds to different levels of amine loss.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 4; 1237-1244
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dry beneficiation and cleaning of chinese high-ash coarse coal utilizing a dense-medium gas-solid fluidized bed separator
Autorzy:
He, J.
Tan, M.
Zhu, R.
Luo, Z.
Powiązania:
https://bibliotekanauki.pl/articles/110808.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coal cleaning
dense-medium fluidized bed
density distribution
segregation
separation performance
Opis:
Dry dense-medium fluidized bed separation provides a new alternative approach for coal beneficiation and cleaning. An indicator of segregation degree Sash was proposed to evaluate the stratified performance of coal samples by bed density. Fluidization stability of the bed was greatly enhanced by mixing a certain amount (21.53%) of fine magnetite powder (< 0.15 mm) into the fluidized media, which indicated a uniform density distribution as well as slight fluctuations in bed. It was found that the favorable density-segregation performance of 3–13 mm coarse coal occurred with a static bed height of 80 mm and a superficial gas velocity of 11.84 cm/s. The optimal segregation degree values of 0.67, 0.74 and 0.76 were obtained for 3–6, 6–10 and 10–13 mm coal samples, respectively. Low-ash clean coal with yields of 50.79, 56.83 and 61.24% were effectively acquired by the dry separation for various coal size fractions, respectively. Probable error values of 0.07, 0.055 and 0.05 g/cm3 were achieved, indicating good separation performance.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 2; 662-675
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of fracture parameters for crack problems in fgm by a meshless method
Wyznaczanie parametrów pękania dla szczelin w materiałach funkcjonalnie gradientowych metodą bezsiatkową
Autorzy:
Sladek, J.
Sladek, V.
Zhang, C.
Tan, C.-L.
Powiązania:
https://bibliotekanauki.pl/articles/280798.pdf
Data publikacji:
2006
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
parametry pękania
analiza szczelin
naprężenia T
materiały funkcjonalnie gradientowe
stress intensity factors
T-stress
meshless methods
hermoelasticity
nonhomogenity
orthotropic materials
Opis:
A meshless method based on the local Petrov-Galerkin approach is proposed for crack analysis in two-dimensional (2D), anisotropic and linear elastic solids with continuously varying material properties. Both quasi-static thermal and transient elastodynamic problems are considered. For time-dependent problems, the Laplace transform technique is utilized. The analyzed domain is divided into small subdomains of circular shapes. A unit step function is used as the test function in the local weak form. It leads to Local Integral Equations (LIE) involving a domain-integral only in the case of transient dynamic problems. The Moving Least Squares (MLS) method is adopted for approximating the physical quantities in the LIE. Efficient numerical methods are presented to compute the fracture parameters, namely, the stress intensity factors and the T-stress, for a crack in Functionally Graded Materials (FGM). The path-independent integral representations for stress intensity factors and T-stresses in continuously non-homogeneous FGM are presented.
Przedstawiono bezsiatkową metodę analizy szczelin opartą na podejściu Petrova-Galerkina dla dwuwymiarowych liniowo-sprężystych i anizotropowych ośrodków o zmieniających się własnościach materiałowych. Rozważono zarówno kwazistatyczne problemy naprężeń cieplnych, jak i zagadnienia elastodynamiki, w których zastosowano aparat transformacji Laplace'a. Badany obszar podzielono na małe podobszary kołowe. Jako funkcję testową w lokalnej, słabej postaci zastosowano jednostkową funkcję schodkową, co prowadzi do lokalnych równań całkowych (LIE). Metodę ruchomych najmniejszych kwadratów (MLS) zastosowano do przybliżenia wielkości fizycznych w LIE. Przedstawiono efektywne metody numeryczne wyznaczania parametrów pękania, a w szczególności współczynników koncentracji naprężeń oraz naprężeń T dla szczelin w materiałach funkcjonalnie gradientowych (FGM). Przedstawiono niezależne od drogi całkowania reprezentacje tych parametrów w materiałach FGM o kontynualnie zmieniającej się niejednorodności.
Źródło:
Journal of Theoretical and Applied Mechanics; 2006, 44, 3; 603-636
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication and Characterization of PMMA/HMX-based Microcapsules via in situ Polymerization
Autorzy:
Jia, X.
Hou, C.
Tan, Y.
Wang, J.
Ye, B.
Powiązania:
https://bibliotekanauki.pl/articles/358134.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
fabrication
characterization
HMX
PMMA
microcapsules
Opis:
Microcapsule technology was applied with nitramine explosives to improve their performance. Polymethyl Methacrylate (PMMA) was selected for the fabrication of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane (HMX) based microcapsules. The PMMA/HMX-based microcapsules were prepared via a facile in situ polymerization of PMMA on the surface of the HMX crystals. Structural characterization of the PMMA/HMX microcapsules was studied systematically by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, and their thermal durability as well as their mechanical sensitivities were measured. The results indicated that spherical microcapsules were formed, with PMMA as the capsule wall and HMX as the core material. The SEM results showed that the grains of the PMMA/HMX microcapsules were spherical and that the particle distribution was homogeneous. XRD and FT-IR analyses indicated that the HMX polymorph was preserved in the optimal β-form during the whole preparative process. The DSC results showed that the PMMA/HMX microcapsules had better thermal decomposition performance, and that the apparent activation energy of the microcapsules had increased by 47.3 kJ/mol compared to the recrystallized HMX, and its thermal stability had greatly improved. In addition, the drop height (H50) had increased from 30.45 cm to 58.49 cm, an increase of 65.81%. Thus, microcapsule technology will have a very wide range of applications in reducing the sensitivity of high energy materials in the future.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 3; 559-572
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Short-term variation in zooplankton community from Daya Bay with outbreaks of Penilia avirostris
Autorzy:
Li, K.
Yin, J.
Tan, Y.
Huang, L.
Song, X.
Powiązania:
https://bibliotekanauki.pl/articles/47644.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
zooplankton
Penilia avirostris
outbreak
short-term variability
nuclear power plant
temporal variation
water temperature
salinity
chlorophyll a
aquaculture area
Daya Bay
Źródło:
Oceanologia; 2014, 56, 3
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Response of dry matter translocation and grain yield of summer maize to biodegradable film in the North China Plain
Autorzy:
Tan, D.
Guo, L.
Liu, J.
Fan, Y.
Li, Q.
Powiązania:
https://bibliotekanauki.pl/articles/2082862.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
polyethylene film
leaf area index
dry matter
transfer
yield components
North China Plain
Opis:
In the North China Plain, it is a matter of urgency to explore the feasibility of using biodegradable film to replace polyethylene film. A field experiment was conducted by covering soils with polyethylene white film, biodegradable white film, biodegradable black film, while the control remained uncovered. This study analysed the effects of using different film types on summer maize dry matter accumulation and transfer, grain yield and yield components during the 2016 and 2017 summer maize growing seasons. Results showed that, for both growing seasons, compared with non-mulching, dry matter translocation, dry matter transfer efficiency of vegetative organs and grain yield for plants following polyethylene white film and biodegradable white film treatments were always lower. However, dry matter accumulation, dry matter translocation, dry matter transfer efficiency, grain yield, and the contribution of dry matter translocation to grain yield before flowering in biodegradable black film treatments significantly increased by 21.0, 33.3, 21.4, 12.6, and 18.5%, respectively. Only the black biodegradable film could increase grain yield as determined by the 1000 kernel mass. Results indicate that black biodegradable films are a viable alternative to polyethylene film in summer maize production in the North China Plain.
Źródło:
International Agrophysics; 2020, 34, 1; 87-94
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An articulated pes from a small parvicursorine alvarezsauroid dinosaur from Inner Mongolia, China
Autorzy:
Hone, D.W.E.
Choiniere, J.N.
Tan, Q.
Xu, X.
Powiązania:
https://bibliotekanauki.pl/articles/21549.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
paleontology
Dinosauria
Theropoda
maniraptoran
arctometatarsalian organism
Cretaceous
Inner Mongolia
alvarezsauroid dinosaur
dinosaur
China
Opis:
A near complete and articulated parvicursorine pes from the Campanian Wulansuhai Formation is described. This pes is referred to the genus Linhenykus and is one of the first foot skeletons to be described for a derived alvarezsaur, providing new information on the first digit of the pes. The evolution of a laterally directed flange of the anterior face of the distal third metatarsal in arctometatarsalian taxa is described and discussed. This flange may have increased stability of the foot during cursorial locomotion and may also provide useful taxonomic and systematic data.
Źródło:
Acta Palaeontologica Polonica; 2013, 58, 3
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A planning model for the chemical integrated system under uncertainty by grey programming approach
Autorzy:
Ren, J.
Tan, S.
Dong, L.
Zhou, Z.
Gao, S.
Pan, C.
Powiązania:
https://bibliotekanauki.pl/articles/778898.pdf
Data publikacji:
2013
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
planning
chemical integrated system
grey programming
Opis:
A model to optimize the planning of the chemical integrated system comprised by multi-devices and multi-products has been proposed in this paper. With the objective to make more profits, the traditional model for optimizing production planning has been proposed. The price of chemicals, the market demand, and the production capacity have been considered as mutative variables, then an improved model in which some parameters are not constant has been developed and a new method to solve the grey linear programming has been proposed. In the grey programming model, the value of credibility can be suggested by the decision-makers, and the results of the production planning calculated by the model can help them to achieve their desired target. An actual case has been studied by the proposed methodology, and the proposed methodology can be popularized to other cases.
Źródło:
Polish Journal of Chemical Technology; 2013, 15, 2; 16-22
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Osteology of the Late Cretaceous alvarezsauroid Linhenykus monodactylus from China and comments on alvarezsauroid biogeography
Autorzy:
Xu, X.
Upchurch, P.
Ma, Q.
Pittman, M.
Choiniere, J.
Sullivan, C.
Hone, D.W.E.
Tan, Q.
Tan, L.
Xiao, D.
Han, F.
Powiązania:
https://bibliotekanauki.pl/articles/20629.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
osteology
Cretaceous
Late Cretaceous
alvarezsauroid
Linhenykus monodactylus
China
biogeography
Dinosauria
Theropoda
Parvicursorinae
Treefitte
dispersal
vicariance
sympatry
Wulansuhai Formation
Inner Mongolia
Opis:
The alvarezsauroid theropod Linhenykus monodactylus from the Upper Cretaceous of Inner Mongolia, China is the first knownmonodactyl non−avian dinosaur, providing important information on the complex patterns of manual evolution seen in alvarezsauroids. Herewe provide a detailed description of the osteology of this taxon. Linhenykus shows a number of fea− tures that are transitional between parvicursorine and non−parvicursorine alvarezsauroids, but detailed comparisons also re− veal that some characters had a more complex distribution. We also use event−based tree−fitting to perform a quantitative analysis of alvarezsauroid biogeography incorporating several recently discovered taxa. The results suggest that there is no statistical support for previous biogeographic hypotheses that favour pure vicariance or pure dispersal scenarios as explana− tions for the distributions of alvarezsauroids across SouthAmerica, NorthAmerica andAsia. Instead, statistically significant biogeographic reconstructions suggest a dominant role for sympatric (or “within area”) events, combined with a mix of vicariance, dispersal and regional extinction. At present the alvarezsauroid data set is too small to completely resolve the biogeographic history of this group: future studies will need to create larger data sets that encompass additional clades.
Źródło:
Acta Palaeontologica Polonica; 2013, 58, 1
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Potential risk of Mesodinium rubrum bloom in the aquaculture area of Dapeng’ao cove, China: diurnal changes in the ciliate community structure in the surface water
Autorzy:
Liu, H.
Song, X.
Huang, L.
Tan, Y.
Zhong, Y.
Huang, J.R.
Powiązania:
https://bibliotekanauki.pl/articles/47949.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
potential risk
Mesodinium rubrum
bloom
aquaculture area
Dapeng'ao cove
China
diurnal change
ciliate community
surface water
heavy rainfall
water column
stratification
irradiance
Opis:
Diurnal changes in the structure of the ciliate community in surface waters were studied in the aquaculture area of Dapeng’ao cove, China. Two periods of heavy rainfall occurred during the study period, intensifying water column stratification and influencing the water’s properties. A total of 21 ciliate taxa from 15 genera were identified; the dominant species was Mesodinium rubrum. The maximum abundance of M. rubrum reached 3.92×104 indiv. dm−3, contributing 95.1% (mean value) to the total ciliate abundance. Diurnal changes in M. rubrum abundance were highly variable, the driving force probably being irradiance and food availability. The results suggest that M. rubrum may form blooms in aquaculture areas when there is a suitable physical regime with enriched nutrients, which is potentially harmful to the fish-farming industry.
Źródło:
Oceanologia; 2012, 54, 1
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of polymer microcomponents using CO2 laser melting technique
Wytwarzanie mikroelementów polimerowych z zastosowaniem techniki topienia laserem CO2
Autorzy:
Tan, W. S.
Zhou, J. Z.
Huang, S.
Zhu, W. L.
Meng, X. K.
Powiązania:
https://bibliotekanauki.pl/articles/947347.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
molding
polymer microcomponents
CO2 laser
irradiation
numerical simulation
formowanie
mikroelementy polimerowe
laser CO2
napromienianie
symulacja numeryczna
Opis:
A new method of laser melting molding to produce high-efficiency and high-quality polymer microcomponents was proposed. Numerical simulation was used to analyze the temperature changes of polymer melt during the laser irradiation process. An orthogonal experiment was also employed to investigate the factors influencing molding accuracy. The molding experiments were conducted on molds with various degrees of roughness, and the surface quality of the molded pieces was tested. The simulation analysis and experimental results showed that the laser power plays a critical role in improving the repetition accuracy. The next factors are irradiation time and mold temperature, followed by molding force. Optimized technological parameters (1.2 W of laser power, 6 mm of laser beam width, 6 s irradiation time, 150 N molding force, and 80 °C mold temperature) were applied to obtain a molded pieces with high repetition accuracy and a microstructure dimensional deviation of less than 1 µm. Using a mold with lower surface roughness provides that we can obtain a molded piece with lower roughness, the roughness difference between the mold and the molded piece was less than 0.012 µm.
Zaproponowano nową metodę formowania mikroelementów polimerowych z zastosowaniem topienia laserowego, zapewniającą wysoką wydajność oraz dobrą jakość wytwarzanych mikroelementów. Istotnym parametrem procesu, wpływającym na jakość formowanych elementów, jest temperatura stopu polimeru. Do analizy zmian tej temperatury pod wpływem napromieniania laserem zastosowano symulację numeryczną. Zastosowano także ortogonalny plan eksperymentu w celu zbadania czynników wpływających na dokładność formowania. Formowania przeprowadzono z użyciem form o różnych stopniach chropowatości i zbadano jakość powierzchni mikroelementów. Analiza wyników symulacji i badań eksperymentalnych wykazała, że moc lasera odgrywa kluczową rolę w uzyskaniu powtarzalnej dokładności. Kolejnymi czynnikami są czas napromieniowania i temperatura formy oraz siły formujące. Zoptymalizowane parametry technologiczne (moc lasera 1,2 W, szerokość wiązki lasera 6mm, czas napromieniania 6 s, siła formująca 150 N i temperatura formowania 80 °C) zastosowano do formowania elementów z powtarzalną dużą dokładnością odtwarzania wymiarów (odchylenia wymiarów nie przekraczały 1 µm). Użycie form o mniejszej chropowatości powierzchni pozwalało także uzyskać mniejszą chropowatość mikroelementów, przy czym różnica chropowatości formy i otrzymanego elementu była mniejsza niż 0,012 µm.
Źródło:
Polimery; 2015, 60, 3; 192-198
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies