Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Szczęch, L." wg kryterium: Autor


Tytuł:
Stanowisko do badania ogniwa paliwowego Nexa™ 1,2 kW
Investigation stand of 1,2kW Nexa™ fuel cell
Autorzy:
Szczęch, L.
Powiązania:
https://bibliotekanauki.pl/articles/210444.pdf
Data publikacji:
2006
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
napęd hybrydowy
ogniwo paliwowe
układ napędowy pojazdu
hybrid drive
fuel cell
vehicle drive system
Opis:
W referacie przedstawiono stanowisko do badań ogniwa paliwowego do napędu pojazdu o niewielkiej mocy. Przedstawiono wyniki pomiarów charakterystyki prądowo-napięciowej oraz zużycia paliwa w ogniwie o mocy 1,2 kW.
The investigation stand of the 1.2 kW Nexa™ PEM fuel cell was introduced in the paper. The investigation results of were showed and basic characteristics described. The influence of temperature on voltage, current, and fuel consumption was estimated.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2006, 55, 3; 127-136
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rozwiązanie konstrukcyjne hamowni podwoziowej małej platformy bezzałogowej
Construction of chassis dynamometer stand of small unmanned vehicle
Autorzy:
Baszuk, K.
Karczewski, M.
Szczęch, L.
Powiązania:
https://bibliotekanauki.pl/articles/222913.pdf
Data publikacji:
2013
Wydawca:
Akademia Marynarki Wojennej. Wydział Dowodzenia i Operacji Morskich
Tematy:
hamownia podwoziowa
badania pojazdu bezzałogowego
chassis dynamometer stand
investigation of a unman ned vehicle
Opis:
W artykule przedstawiono rozwiązanie konstrukcyjne hamowni podwoziowej opracowanej do badań hybrydowego układu napędowego małej platformy bezzałogowej. Hamownia posłuży do badań hybrydowego układ napędowego, gdzie dokonany zostanie pomiar wielkości elektrycznych proporcjonalnych do obciążenia układu napędowego oraz innych wielkości, takich jak temperatura baterii i silników elektrycznych czy zużycia paliwa podczas realizacji cykli obciążenia pojazdu bezzałogowego.
The paper describes a solution of chassis dynamometer stand. It was developed to investigate a hybrid propulsion system in a small unmanned vehicle. The stand developed will be used to measure electric parameters proportional to load of hybrid propulsion system. Measurements will be done during load cycles of the vehicle investigated.
Źródło:
Zeszyty Naukowe Akademii Marynarki Wojennej; 2013, R. 54 nr 3 (194), 3 (194); 17-26
0860-889X
Pojawia się w:
Zeszyty Naukowe Akademii Marynarki Wojennej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rozwiązania pojazdów bezzałogowych
Construction of unmanned vehicles
Autorzy:
Baszuk, K.
Szczęch, L.
Powiązania:
https://bibliotekanauki.pl/articles/223062.pdf
Data publikacji:
2010
Wydawca:
Akademia Marynarki Wojennej. Wydział Dowodzenia i Operacji Morskich
Tematy:
pojazdy bezzałogowe
napęd hybrydowy
unmanned vehicles
hybrid drives
Opis:
W artykule przedstawiono klasyfikację platform bezzałogowych pod względem masy, prędkości poruszania oraz autonomiczności działań. Przedstawiono również niektóre rozwiązania platform z różnymi systemami napędu.
The paper presents a classification of unmanned platforms with regard to mass, speed and autonomy of operation. It also deals with some platforms with different propulsion systems, including hybrid drive.
Źródło:
Zeszyty Naukowe Akademii Marynarki Wojennej; 2010, R. 51 nr 4 (183), 4 (183); 7-12
0860-889X
Pojawia się w:
Zeszyty Naukowe Akademii Marynarki Wojennej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Propulsion module for unmannned vehicle
Autorzy:
Polak, F.
Szczęch, L.
Powiązania:
https://bibliotekanauki.pl/articles/244495.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
unmanned vehicle
hybrid propulsion system
UGV
electric generator
electric propulsion motor
Opis:
Solution of the propulsion system of the unmanned vehicle elaborated and built in the Laboratory of Internal Combustion Engines Military University of Technology is shown in the paper. Unmanned vehicles are about to play key role in modern warfare. There are many types of unmanned vehicles. Those which can operate in urban areas, especially inside buildings are considered as a most useful for modern army. Most unmanned vehicles are battery operated, causing low range or low speed of the vehicle. Internal combustion engines are not proper for operation inside buildings, due to exhaust gases produced by engine. Connecting two types of propulsion system, defect of range in battery and gases in combustion engines are eliminated, because we can program vehicle to not turning on engine inside buildings. Using a module for those types of vehicles, we can design entire gamut of unmanned and even manned vehicles, decreasing design costs and repair time due to parts repeatability. Using a prepared propulsion module, design engineer can freely determine length, width and wheel track of designed vehicle. Designed modules enable vehicle fast return to combat ability, due to parts repeatability. One module, used as a host, can reconstruct damage vehicle. There is possibility of using different engines, enlarging list of available modules. Economic factor has also big meaning, due to parts repeatability.
Źródło:
Journal of KONES; 2011, 18, 1; 479-482
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pomiary oporów wewnętrznych silnika spalinowego
Investigation of internal resistance of a diesel engine
Autorzy:
Karczewski, M.
Szczęch, L.
Powiązania:
https://bibliotekanauki.pl/articles/222597.pdf
Data publikacji:
2013
Wydawca:
Akademia Marynarki Wojennej. Wydział Dowodzenia i Operacji Morskich
Tematy:
opory wewnętrzne silnika
badania silnika
engine losses
engine investigation
Opis:
W artykule przedstawiono metodykę oraz wyniki pomiarów oporów wewnętrznych silnika o zapłonie samoczynnym. Określono opory ruchu wprowadzane przez poszczególne układy: układ korbowo-tłokowy, rozrządu, chłodzenia, smarowania i elektryczny związane bezpośrednio z pracą silnika. Określono procentowy udział strat mocy na napęd poszczególnych układów silnika.
Methodics and results of losses investigation of a diesel engine are described in the paper. There are showed power losses connected with engine mechanism work: piston-crank shaft, camshaft, injection pump, lubrication and electric supply. Percentage ratio of power lost in particular engine mechanism is determined.
Źródło:
Zeszyty Naukowe Akademii Marynarki Wojennej; 2013, R. 54 nr 2 (193), 2 (193); 39-47
0860-889X
Pojawia się w:
Zeszyty Naukowe Akademii Marynarki Wojennej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of loading command system vehicles on the transport aircraft C-130
Autorzy:
Karczewski, M.
Polak, F.
Szczęch, L.
Walentynowicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/347978.pdf
Data publikacji:
2016
Wydawca:
Akademia Wojsk Lądowych imienia generała Tadeusza Kościuszki
Tematy:
command system vehicles
air transport of vehicles
Opis:
The article presents modeling of loading platforms for the automated command system of a field artillery battalion mounted on the light wheeled chassis. According to the operational requirements, the field battalion should be tailored to be transported by the transport aircraft C-130E Hercules, which requires limiting the weight and dimensions of vehicles. Since a vehicle cab height is equal with the exact centimeter precise to the aircraft cargo bay height, it is necessary to reduce the relevant vehicle height by lowering the tire pressures in order to obtain an adequate margin.
Źródło:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki; 2016, 3; 100-111
1731-8157
Pojawia się w:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metodyka wyznaczania trójskładnikowej mieszaniny optymalnej do zasilania silnika z układem Common Rail
Methodology used to determinate three-component optimum mixture to feed common rail engine
Autorzy:
Karczewski, M.
Szczęch, L.
Powiązania:
https://bibliotekanauki.pl/articles/222008.pdf
Data publikacji:
2012
Wydawca:
Akademia Marynarki Wojennej. Wydział Dowodzenia i Operacji Morskich
Tematy:
silnik spalinowy
układ zasilania
paliwo F-34
estry
combustion engine
fuel system
F-34 fuel
esters
Opis:
Problem zasilania silników spalinowych pojazdów wojskowych narasta wraz ze wzrostem liczby pojazdów w armiach. Kolejnym problemem jest stosowanie dodatków biokomponentów, które zmieniają właściwości paliw podstawowych. Dlatego konieczne jest podejmowanie działań prowadzących do przystosowania silników do zasilania paliwami pochodzącymi ze źródeł odnawialnych. Celem badań było eksperymentalne dobranie mieszanin trójskładnikowych (paliwo F-34, RME i etanol) oraz określenie ich wpływu na parametry użyteczne i skład spalin silnika Renault G9T o zapłonie samoczynnym. W wyniku przeprowadzonych badań stwierdzono, że parametry silnika z wysokociśnieniowym układem wtrysku zasilanego paliwem F-34 i mieszanin uległy częściowo zmianie w stosunku do podstawowego paliwa, jakim był olej napędowy. Ponadto nie można wyznaczyć optymalnej mieszaniny.
The problem of fuel supply for military vehicles is growing along with the number of vehicles in armies. Another problem is the use of biocomponent agents which change the properties of basic fuels. Therefore it is necessary to take steps to adapt the engines to use fuels form renewable sources. The aim of the investigations was to experimentally select three-component mixtures (fuel R-34, RME, ethanol) and to determine their effect on performance parameters and the composition of gases in a Renault G9T diesel engine. As a result of the investigations conducted it was found out that parameters of the CR engine with fed with fuel F-34 and mixtures partially changed as compared with the basic fuel, which was diesel oil. In addition it was impossible to determine the optimum mixture.
Źródło:
Zeszyty Naukowe Akademii Marynarki Wojennej; 2012, R. 53 nr 2 (189), 2 (189); 77-92
0860-889X
Pojawia się w:
Zeszyty Naukowe Akademii Marynarki Wojennej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metodyka pomiaru parametrów małej hybrydowej platformy bezzałogowej
Measurement methodology of parameters of small hybrid unmanned platform
Autorzy:
Polak, F.
Szczęch, L.
Walentynowicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/222607.pdf
Data publikacji:
2013
Wydawca:
Akademia Marynarki Wojennej. Wydział Dowodzenia i Operacji Morskich
Tematy:
bezzałogowe pojazdy
pojazd hybrydowy
układ napędowy
BPL
pomiar i akwizycja wielkości rzeczywistych i fizycznych
unmanned vehicle
hybrid vehicle
UGV
measuring and acquisition of physical and real quantities
Opis:
W artykule przedstawiono metodykę pomiaru wybranych parametrów układu napędowego małej platformy z napędem hybrydowym. Opisano obiekt pomiarowy i narzędzia użyte do wykonania pomiarów wielkości elektrycznych oraz prędkości kół pojazdu. Pomiary zostały zarejestrowane za pomocą oprogramowania Database Connect firmy Addi-Data.
In paper, selected parameters of power transmission from small hybrid vehicle, methodology of acquisition was shows. Paper shows short description of measured object, tools used for measuring electrical quantities and wheels speed. Measurements were recorded by Addi-Data Database Connect software.
Źródło:
Zeszyty Naukowe Akademii Marynarki Wojennej; 2013, R. 54 nr 2 (193), 2 (193); 71-80
0860-889X
Pojawia się w:
Zeszyty Naukowe Akademii Marynarki Wojennej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of the unmanned vehicle hybrid propulsion system
Autorzy:
Baszuk, K.
Szczęch, L.
Powiązania:
https://bibliotekanauki.pl/articles/243705.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
unmanned vehicle
hybrid propulsion system
UGV
electric vehicle
electrical parameters measurements
Opis:
Investigation scheme of the unmanned vehicle is shown in the paper. It is the unmanned vehicle planned to use in military application. Using the unmanned vehicles on modern war field is increasingly popular. The unmanned vehicle is powered with a hybrid propulsion system. The main source of energy is diesel engine and electric generator. It supplies the battery and six propulsion electric motors. In the propulsion system is a lot of components: controllers and electric devices. Is important to know how it works in load condition. Investigation stand was constructed to break all drive wheels. There will be done measuring of electric parameters of the hybrid propulsion system. Temperature of the battery and electric motors, fuel consumption of internal combustion engine needed to appreciate of load and energy balance will be measured as well. Investigation equipment which will be used during investigation is also performed in the paper.
Źródło:
Journal of KONES; 2011, 18, 1; 53-56
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of the integrated powertrain on the dynamometer stand
Autorzy:
Karczewski, M.
Szczęch, L.
Walentynowicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/243951.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engine
dynamometer stand
integrated powertrain
Opis:
Description of the test stand for investigation of the integrated powertrain (powerpack) for armoured modular vehicle (AMV), disassembled from vehicle, is presented in this paper. The powerpack unit consist of a diesel engine, a gearbox and a cooling unit with a hydraulic fan drive. The stand is equipped with measuring devices for torque measure, fuel consumption, exhaust smoke and exhaust gas components emission analysers. The powerpack has been loaded by a hydraulic dynamometer of power range up to 1250 kW. It is dynabar water dynamometer with high dynamics of load changes. For control the motor and drive, system the original control panels from the vehicle was used. The original start-up unit, mid fuel tank and air filters were used too. Research on the powerpack unit was made in the steady state versus the engine load and speed. The parameters of the engine and exhaust components were measured and compared with the catalogue values. Two modes of engine work were compared – economic and dynamic modes. Those differences between two modes are result of maximum fuel consumption decreasing. The parameters of engine work were comparable in middle and low range of engine load. On the stand investigation in transient states during free engine acceleration were made. It was found that additional load of engine is too high and this problem should be clarified.
Źródło:
Journal of KONES; 2013, 20, 4; 147-153
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the F-34 unified battlefield fuel with bio components on usable parameters of the IC engine
Wpływ mieszanin jednolitego paliwa pola walki F-34 z biokomponentami na parametry użyteczne silnika
Autorzy:
Karczewski, M.
Szczęch, L.
Powiązania:
https://bibliotekanauki.pl/articles/1365760.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
IC engine
fuel supply system
F-34 fuel
RME- Rapeseed Methyl Esters
silnik spalinowy
układ zasilania
paliwo F-34
RME – estry metylowe kwasów oleju rzepakowego
Opis:
The problem of the military vehicles engines fuelling increases with the growth of the amount of vehicles in the armies. At the same time, another problem with fuel supply in modern engines is the use of bio component additives, which changes characteristics (quality) of the used fuels. Therefore, it is important to take actions to adapt engines to powering with fuels coming from renewable sources. The aim of the research was to define the influence of an engine supplying fuel on work parameters and exhaust gases composition in the G9T Renault diesel engine. The tests were conducted during fuelling of the engine with six kinds of fuels: basic fuel (diesel oil), NATO code F-34 fuel, as well as fuel mixtures: F-34 and RME with different ratio. In the result of the research it was concluded that the parameters of the G9T Renault engine with the common rail fuel system in terms of F-34 and RME consumption (using) decreased in comparison to diesel oil basic fuel.
Problemy zasilania silników pojazdów wojskowych narastają wraz ze wzrostem liczby pojazdów w armiach. Silniki tłokowe i turbinowe wykorzystują paliwa różniące się zakresem temperatury destylacji. Dodatkowym problemem przy zasilaniu współczesnych silników spalinowych jest konieczność stosowania biokomponentów, które mogą zmieniać właściwości paliw podstawowych i wpływać na pogorszenie przebiegu spalania. Dlatego też konieczne jest podejmowanie działań prowadzących do zbadania wpływu paliw pochodzących ze źródeł odnawialnych na parametry pracy silników. Celem badań było ocena wpływu zastosowanego paliwa na parametry użyteczne i skład spalin tłokowego silnika o zapłonie samoczynnym Renault G9T. Badania przeprowadzono podczas zasilania silnika sześcioma rodzajami paliwa: paliwem podstawowym, jakim był olej napędowy, paliwem lotniczym o kodzie NATO F-34, mieszaninami paliw: F-34 i estrów metylowych wyższych kwasów tłuszczowych oleju rzepakowego. W wyniku przeprowadzonych badań stwierdzono, że parametry silnika Renault G9T z wysokociśnieniowym układem wtrysku, zasilanego paliwem F-34 i biokomponentami uległy pogorszeniu w stosunku do podstawowego paliwa, jakim był olej napędowy, co może mieć znaczenie przy wykorzystaniu tego rodzaju paliw w silnikach pojazdów wojskowych.
Źródło:
Eksploatacja i Niezawodność; 2016, 18, 3; 358-366
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of the technical condition of the powerpack for AMV Rosomak on the dynamometer test stand
Autorzy:
Karczewski, M.
Szczęch, L.
Walentynowicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/245173.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engine
diagnostics
powerpack
Opis:
The paper describes standard methods of diagnosing of the AMV (the Rosomak) drive unit technical condition used in daily operation in military missions in Afghanistan. Main rule of the method of diagnosing of the vehicle technical condition is using an external diagnosing system. This system is connected to the vehicle at the time of checking of operation of the powertrain control system configuration of the drive unit to permit the diagnosis, including examination of the engine and gearbox. Enhanced diagnostic system is connected to the OBD system with using standard PC computer with appropriate software. Stored examples of the results of the operation of such system are included in the paper. Measuring was led on a dynamometer stand to perform research of a propulsion unit in work condition. Measurements of the engine parameters were led in steady state and transient engine operating conditions. Unsteady-state condition studies were carried out using the method of free-range acceleration of the engine. Pointed out the merits of the development of this type of study due to the perceived potential and usefulness of the results obtained. The results of studies carried out by various methods and assess the current condition of the engine and the entire powertrain were compared.
Źródło:
Journal of KONES; 2013, 20, 3; 221-228
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energetic balance of unmanned ground vehicle hybrid power transmission
Autorzy:
Karczewski, M.
Szczęch, L.
Polak, F.
Powiązania:
https://bibliotekanauki.pl/articles/242808.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
balance
unmanned vehicle
hybrid transmission
test stand
Opis:
Article presents the energetic balance of small-unmanned vehicle hybrid power transmission. The vehicle equipped with series hybrid transmission consisted of electric engines connected to the battery pack and small Diesel power generator. In mentioned construction, battery is used as energy buffer and combustion engine is used more as emergency power supply, and is turned on when battery is depleted. In other condition, power generator can be turned off, without reducing power of transmission parameters, except its range. Investigation was divided on two stages. At first stage generator, charging unit and battery were placed outside the vehicle. One piston power generator was feed by Diesel fuel. Fuel consumption of power generator was recorded from AVL fuel balance and energy parameters were recorded by power line analyser of BMR Company. Generator was connected to the direct current power plant. 70 Ah and 48 DC Lithium-polymer battery was charged from the power plant. After charging cycle, small water resistor was used to discharge the battery. Power parameters of discharged battery were measured. This enable to measure balance form tank to the battery. Second stage of the energetic balance determination was to measure internal resistances of vehicle power transmission from current inverter/converter connected to the engine and through the transmission up to the wheels of the vehicle. Power loss of energy at different speed of vehicle wheels without ground contact was measured in respect of power consumption. The series hybrid transmission is consider less efficient than parallel but because of specific configuration of power transmission, it was possible to reach higher efficiency
Źródło:
Journal of KONES; 2018, 25, 2; 177-184
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnozowanie zintegrowanego zespołu napędowego KTO Rosomak
Diagnosing power pack of AMV Rosomak
Autorzy:
Karczewski, M.
Szczęch, L.
Walentynowicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/347078.pdf
Data publikacji:
2013
Wydawca:
Akademia Wojsk Lądowych imienia generała Tadeusza Kościuszki
Tematy:
silnik spalinowy
zintegrowany zespół napędowy
KTO Rosomak (wóz bojowy)
diagnostyka techniczna
stanowisko dynamometryczne
combustion engine
integrated propulsion system
AMV Rosomak (combat vehicle)
technical diagnostics
dynamometer test stand
Opis:
W referacie przedstawiono stanowisko dynamometryczne do badania zintegrowanego zespołu napędowego KTO Rosomak. Stanowisko to umożliwia badanie parametrów pracy układu napędowego oraz prowadzenie szerokiej diagnostyki w przypadku wystąpienia awarii. Wyniki pomiarów prowadzonych na silniku remontowanym po wybuchu miny pod pojazdem są przedstawione w końcowej części referatu.
The dynamometer test stand for investigating the AMV Rosomak integrated propulsion system is discussed in the paper. The stand enables the measurement of propulsion system parameters and extended diagnostics in case of damage. The investigation results of an engine overhaul after an IED explosion are shown at the end of the paper.
Źródło:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki; 2013, 2; 94-108
1731-8157
Pojawia się w:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Conception of a vehicle powered by fuel cell
Koncepcja pojazdu zasilanego ogniwem paliwowym
Autorzy:
Szczęch, L.
Rajewski, A.
Powiązania:
https://bibliotekanauki.pl/articles/242721.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
napędy
ogniwa paliwowe
hybrydowe układy napędowe
powertrain
fuel cell
hybrid powertrain
Opis:
W referacie przedstawiono koncepcję rozwiązania układu napędowego pojazdu zasilanego ogniwem paliwowym. Źródłem zasilania jest w nim ogniwo paliwowe typu PEMFC Nexa™ 1.2 kW. Zastosowane ogniwo dysponuje niewielką mocą w związku z czym należało opracować rozwiązanie pojazdu czterokołowego o niewielkiej masie własnej. Wykorzystano w tym celu podwozie niewielkiego jednoosobowego wózka golfowego, do którego trzeba było dodatkowo zaprojektować przednie zawieszenie. Pojazd napędzany jest dwoma silnikami elektrycznymi prądu stałego 24V/400W Najistotniejszym elementem było dobranie i skonfigurowanie układu zasilenia silników elektrycznych będących głównym źródłem napędu pojazdu. Ze względu na charakterystykę ogniwa paliwowego konieczne było zastosowanie przetwornika DC/DC umożliwiającego wykorzystanie ogniwa paliwowego do ładowania akumulatorów. W układzie zasilania zastosowano dwa dwunastowoltowe, żelowe akumulatory o pojemności 18 Ah. Energia z akumulatorów doprowadzana jest do układu sterowania silnikami napędowymi. Zastosowanie sterownika silników napędowych jest niezbędne w układzie elektrycznym, aby zmiana ich prędkości obrotowej była możliwa, a przez to zmiana prędkości jazdy. Układ powinien także zapewnić włączenie biegu wstecznego oraz hamowanie silnikami. Jest to ważne z tego względu, że jest to jedyny sposób na zatrzymanie pojazdu.
The conception of solution of a vehicle driving system supplied with a fuel cell was presented in report. The fuel cell type PEMFC Nexa ™ 1.2 kW is the source of power supply. Applied fuel cell disposes small power in connection with it was obvious to work out the solution of a four-wheeled vehicle with small own mass. It was used in this aim the chassis of a small one-man golf trolley to which we should to design front suspension in addition. Energy from batteries was brought to a driving engines control system. Vehicle was driven by two DC electric engines 24V/400W. It was the most essential factor choosing and configuration the system of power supply of electric engines being main source of vehicle driving. With regard on of fuel cell characteristic it was necessary to apply a DC/DC converter enabling the use the fuel cell to charge the batteries. Two 12 V gelly batteries with 18 Ah capacity in the power supplies system were applied. Application of the control unit for driving engines is necessary in the electric system, so that the change of their rotational speed is possible, and by reason of this the change of the travelling speeds. The electric system should also provide switching on the reverse and the applying of the braking with engines. It is important on that account that this is the only way of the vehicle stopping.
Źródło:
Journal of KONES; 2007, 14, 4; 479-486
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies