Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Sun, T." wg kryterium: Autor


Tytuł:
Hemodynamic impacts of left coronary stenosis : a patient-specific analysis
Autorzy:
Chaichana, T.
Sun, Z.
Jewkes, J.
Powiązania:
https://bibliotekanauki.pl/articles/306747.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coronary artery disease
computational fluid dynamics (CFD)
wall shear stress
tętnica wieńcowa
dynamika cieczy
naprężenie
Opis:
This study analyses the hemodynamic variations surrounding stenoses located at the left coronary bifurcation, and their influence on the wall shear stress (WSS) in realistic coronary geometries. Four patients with suspected coronary artery disease were chosen, and coronary models were reconstructed based on high-resolution CT data. The coronary stenoses were observed at the left circumflex and left anterior descending branches, resulting in a lumen narrowing of >50%. Flow analysis was performed using computational fluid dynamics, to simulate the cardiac flow conditions of the realistic individual patient geometry. Blood flow and WSS changes in the left coronary artery were calculated throughout the entire cardiac phases. Our results revealed that the recirculation regions were found at the poststenotic locations. WSS was found to increase at the stenotic positions in all four patients. There is a strong correlation between coronary stenosis and the hemodynamic changes, which are reflected in blood flow pattern and WSS, based on the realistic left coronary geometries.
Źródło:
Acta of Bioengineering and Biomechanics; 2013, 15, 3; 107-111
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selection of reference genes for quantitative real-time RT-PCR on gene expression in Golden Pompano (Trachinotus ovatus)
Autorzy:
Chen, X.J.
Sun, Y.
Zhang, X.Q.
Huang, S.
Cao, Z.J.
Qin, Q.W.
Hu, W.T.
Zhou, Y.C.
Powiązania:
https://bibliotekanauki.pl/articles/2087908.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Źródło:
Polish Journal of Veterinary Sciences; 2017, 3; 583-594
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on interaction of APFs based on relative gain array
Autorzy:
Feng, X.
Sun, T.
Ma, W.
Powiązania:
https://bibliotekanauki.pl/articles/141523.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
interaction effect
relative gain array
active power filter
Norton equivalent
LCL filter
Opis:
Different APFs (Active Power Filter) interact with each other when multiple APFs are connected to the grid, and the interactions deteriorate the control performance of APFs and even lead to system instability. This paper presents a method to analyze the dynamic interaction of multiple APFs in a weak grid. This method uses the Norton equivalent principle to establish the mathematical model of a single APF. The mathematical model of the multiple APFs connected to the grid is set up based on the single APF mode. The RGA (Relative Gain Array) principle is used to analyze the interactions among multiple APFs. Besides, this paper analyzes the effect of changing circuit parameters and controller parameters on the change of the interactions. The strategy of weakening and eliminating the interaction is proposed based on rational selection and combination of parameters. Analysis, along with time domain simulation and experimental results, is presented to verify the feasibility and effectiveness of the proposed method and strategy.
Źródło:
Archives of Electrical Engineering; 2018, 67, 1; 165-177
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reliability analysis for multi-state system based on triangular fuzzy variety subset bayesian networks
Analiza niezawodności systemu wielostanowego z zastosowaniem sieci bayesowskich opartych na rozmytych podzbiorach zmienności opisanych przez trójkątną funkcję przynależności
Autorzy:
He, Q.
Zha, Y.
Zhang, R.
Sun, Q.
Liu, T.
Powiązania:
https://bibliotekanauki.pl/articles/302183.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
teoria zbiorów rozmytych
system wielostanowy
sieć bayesowska
wypadek podczas ruchu wózka windy
analiza niezawodności
reliability analysis
fuzzy set theory
Multi-State System
Bayesian network
elevator free movement accident
Opis:
W niniejszej pracy zaproponowano nową metodę analizy niezawodności systemów wielostanowych wykorzystującą sieci Bayesa (BN) oparte na rozmytych podzbiorach zmienności opisanych za pomocą trójkątnej funkcji przynależności. Metoda ta uwzględnia rozmyty charakter danych dotyczących uszkodzeń, wielostanowość systemu oraz zmienność prawdopodobieństwa wystąpienia uszkodzenia w czasie. BN, które znalazły zastosowanie w modelowaniu i metodach obliczeniowych, wykorzystuje się także do analizy niezawodności. W przedstawionych badaniach, analizę BN uzupełniono o elementy teorii zbiorów rozmytych wykorzystując do opisu prawdopodobieństwa wystąpienia uszkodzenia, podzbiory zmienności opisane przez trójkątną funkcję przynależności. Niepewność zależności logicznej pomiędzy awariami reprezentowanymi przez różne węzły sieci opisano za pomocą tabel rozmytego prawdopodobieństwa warunkowego. W pierwszej kolejności analizowano prawdopodobieństwo uszkodzenia każdego korzenia (węzła głównego) w funkcji czasu. Następnie, wyznaczono trójkątny rozmyty podzbiór zmienności, za pomocą którego opisano rozmyte prawdopodobieństwo uszkodzenia węzłów głównych. Podzbiór ten wykorzystano do analizy niezawodności systemu wielostanowego przy pomocy rozmytych BN. Artykuł kończy opis wypadku podczas ruchu wózka windy szybkobieżnej, który potwierdza skuteczność i możliwość praktycznego wykorzystania proponowanej metody. Wyniki pokazują, że proponowane podejście może skutecznie rozwiązywać na wczesnym etapie problemy związane z niepewnością informacji oraz wielostanowością systemu.
In this paper, a novel reliability analysis method for multi-state system is proposed on the basis of triangular fuzzy variety subset Bayesian network (BN). The method considers fuzziness, multi-state, and variety of failure probability over time. With advantages in modeling and computation, the BN is utilized for reliability analysis. Fuzzy set theory is introduced into the BN analysis by using triangular fuzzy variety subset to describe failure probability. The uncertainty of fault logical relationship between different nodes is described through fuzzy conditional probability tables. As a function of time, the failure probability of each root node is analyzed first. Subsequently, the triangle fuzzy variety subset is established to describe the fuzzy failure probability of root nodes. This subset is applied to analyze the reliability of multi-state system fuzzy BN. Finally, a case study on the car free movement accident of flexible high-speed elevator lift system is used to demonstrate the effectiveness and practicality of the proposed method. Results show that the proposed approach could effectively address the problems on information uncertainty and multi-state in the early stage.
Źródło:
Eksploatacja i Niezawodność; 2017, 19, 2; 158-165
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Requirement for and Use of Coated P92 Steel for Enhanced Structural Integrity at High Temperature
Autorzy:
Hoey, T.
Chen, R.
McCartney, D.
Sun, W.
Mansfield, J.
Barnard, P.
Foster, J.
Powiązania:
https://bibliotekanauki.pl/articles/1402066.pdf
Data publikacji:
2015-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.05.Bx
81.15.Pq
68.37.-d
61.05.-a
64.75.-g
Opis:
To achieve climate change targets and to improve the efficiency of fossil fuel power plant the temperature and pressure of operation must be increased. With steam temperatures predicted to rise by 50-100 K in the next 30 years, this presents a number of material challenges, not least for the ferritic steels used for steam pipework. Currently the best in class ferritic steel for power plant steam pipework is P92, a 9-12% Cr advanced martensitic steel that was developed for its superior high temperature creep resistance. This paper will give a brief overview of P92 microstructure, composition and metallurgy and identify experimentally and computationally some key features of the material. As well as failure by creep, P92 at high temperature also suffers from steam oxidation damage. Recent literature suggests that coatings applied to P92 are a very promising solution. A short review of previous work on steam oxidation resistant coatings for P92 is included. A novel Co-Cr-C coating that has not previously been explored for this application is described. Experimental and computational characterisation is included.
Źródło:
Acta Physica Polonica A; 2015, 128, 4; 514-519
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przyspieszone badania degradacji przy stałym naprężeniu w analizie diod superelektroluminescencyjnych i wrażliwości parametrycznej
Constant stress adt for superluminescent diode and parameter sensitivity analysis
Autorzy:
Li, X.
Jiang, T.
Sun, F.
Ma, J.
Powiązania:
https://bibliotekanauki.pl/articles/301041.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
analiza wrażliwościowa
ruchy Browna
obniżenie charakterystyk
badania przyspieszone
SLD
sensitivity analysis
Brownian motion
performance degradation
accelerated testing
Opis:
Ruchy Browna są jednym z najpotężniejszych procesów stochastycznych w ciągłym czasie i ciągłej przestrzeni, który ma też mocne podstawy fi zyczne. W analizie przyspieszonych badań degradacji (ADT), rozkład odwrotny gaussowski, będący rozkładem czasu pierwszego przejścia ruchu Browna z dryfem (drift Brownian motion), staje się bardzo popularnym modelem predykcji statystycznej życia i niezawodności produktów. Diody superelektroluminescencyjne (SLD) o długiej żywotności i wysokiej niezawodności mają wiele zalet fi zycznych, które sprawiają, że zastępują one diody laserowe (LD) oraz diody elektroluminescencyjne (świecące) (LED) i mają szerokie zastosowanie w czujnikach światłowodowych. W niniejszym artykule przeprowadzono badania ADT diody SLD przy stałym naprężeniu. Aby ocenić możliwość zastosowania rozkładu odwrotnego gaussowskiego do badań diod SLD, określono najpierw trwałość i niezawodność SLD na podstawie danych o spadku mocy optycznej uzyskanych z badania ADT prowadzonego przy stałym naprężeniu. Następnie przeprowadzono analizy wrażliwości parametrycznej w trzech wymiarach: niezawodności, czasu życia i parametru analitycznego. Wreszcie, kierując się wynikami analizy wrażliwościowej, przedstawiono niektóre zasady planowania i przeprowadzania testów ADT przy stałym naprężeniu.
Brownian motion is one of the most powerful stochastic processes in continuous time and continuous space and has a good physics background. For the analysis of accelerated degradation testing (ADT), the inverse Gaussian (IG) distribution, which is the fi rst passage time distribution of the drift Brownian motion (DBM), becomes a very popular statistical prediction model of product life and reliability. Instead of laser diode (LD) and Light Emitting Diode (LED), long-life and high-reliability super-luminescent diode (SLD) has many physical advantages and has been widely used in optical fi ber sensors. In this paper, the constant stress ADT (CSADT) of SLD was conducted. In order to evaluate the applicability of IG distribution to SLD, we fi rst estimate the life and reliability of SLD based on the optical power degradation data collected in CSADT. Then parameter sensitivity analyses are conducted in the 3-dimensions of reliability, lifetime and the analytic parameter. Finally, according to the sensitive analysis results, some CASDT planning and testing principles are presented.
Źródło:
Eksploatacja i Niezawodność; 2010, 2; 21-26
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cycle life prediction of Lithium-ion cells under complex temperature profiles
Prognozowanie cyklu życia ogniw litowo-jonowych przy złożonych profilach temperaturowych
Autorzy:
Liu, T.
Cheng, L.
Pan, Z.
Sun, Q
Powiązania:
https://bibliotekanauki.pl/articles/301978.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
lithium-ion cells
capacity fade
complex temperature profiles
life prediction
reliability assessment
ogniwa litowo-jonowe
utrata pojemności
złożone profile temperaturowe
prognozowanie trwałości
ocena niezawodności
Opis:
Nowadays, the extensive use of Lithium-ion cells requires an accurate life prediction model. Failure of Lithium-ion cells usually results from a gradual and irreversible capacity fading process. Experimental results show that this process is strongly affected by temperature. In engineering applications, researchers often use the regression-based approach to model the capacity fading process over cycles and then perform the cycle life prediction. However, because of neglecting temperature influences, this classic method may lead to significant prediction errors, especially when cells are subject to complex temperature profiles. In this paper, we extend the classic regression-based model by incorporating cell temperature as a predictor. Two effects of temperature on cell capacity are considered. One is the positive effect that high temperature lets a cell discharge more capacity in a cycle; The other is the negative effect that high temperature accelerates cell capacity fading. A cycle life test with six cells are conducted to valid the effectiveness of our method. Results show that the improved model is more suitable to capture the dynamics of cell capacity fading path under complex temperature profiles.
Obecne szerokie zastosowanie ogniw litowo-jonowych wymaga stworzenia trafnego modelu prognozowania ich trwałości. Uszkodzenia ogniw litowo-jonowych zazwyczaj wynikają ze stopniowego i nieodwracalnego procesu utraty pojemności. Wyniki doświadczeń pokazują, że na ten proces silny wpływ wywiera temperatura. W zastosowaniach inżynieryjnych, naukowcy często wykorzystują podejście oparte na regresji do modelowania procesu utraty pojemności w poszczególnych cyklach by następnie dokonać prognozy trwałości w danym cyklu pracy. Jednakże, ta klasyczna metoda nie bierze po uwagę wpływu temperatury, co może prowadzić do znacznych błędów predykcji, w szczególności, gdy ogniwa pozostają pod wpływem złożonych profili temperaturowych. W prezentowanym artykule, rozszerzono klasyczny model oparty na regresji poprzez włączenie temperatury ogniwa jako czynnika prognostycznego. Przeanalizowano dwa rodzaje wpływu temperatury na pojemność ogniw. Z jednej strony, wysoka temperatura oddziałuje pozytywnie pozwalając ogniwu na uzyskanie większej pojemności w danym cyklu; z drugiej strony jest to wpływ negatywny, ponieważ wysoka temperatura przyspiesza utratę pojemności ogniwa. Przy użyciu sześciu ogniw, przeprowadzono badanie trwałości w danym cyklu pracy w celu potwierdzenia skuteczności naszej metody. Wyniki pokazują, że udoskonalony model pozwala lepiej uchwycić dynamikę ścieżki utraty pojemności ogniwa w warunkach złożonych profili temperaturowych.
Źródło:
Eksploatacja i Niezawodność; 2016, 18, 1; 25-31
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reverse flotation of ultrafine magnetic concentrate by using mixed anionic/cationic collectors
Autorzy:
Lu, D.
Hu, Y.
Li, Y.
Jiang, T.
Sun, W.
Wang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/110550.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
ultrafine magnetite
collector mixture
reverse flotation
closed flotation
Opis:
Compared to reverse cationic flotation, the advantages of reverse anionic flotation include relatively lower sensitivity to slimes and lower reagent cost. Besides, anionic collectors were found to have excellent capability of selectively separating an ultrafine magnetite ore. Addition of a small amount of cationic collector into the anionic collector as the collector mixture can improve the metallurgical results of removing silicates in reverse flotation. In this paper, NaOL and DDA were used for reverse flotation of the ultrafine magnetic concentrate. The separation performance of the collector mixture was investigated at different ratios of NaOL and DDA. The results showed that a better separation performance was obtained for the collector mixture than for NaOL alone. There was an optimal molar ratio between NaOL and DDA equal to 10:1. In the flotation system with the presence of the collector mixture, the good selectivity was found when starch was used as a depressor for magnetite and CaO was used as an activator for quartz. The influences of starch and CaO dosages on the separation performance of magnetite, quartz and chlorite had been investigated through micro-flotation tests. The infrared spectral analysis showed stretching vibration peaks of chemical adsorption of the collector mixture on the magnetite surface. The peaks were not present when starch was used as the depressor for magnetite. The closed flotation tests on the magnetic concentrate with the particle size of -25 μm were performed in the laboratory. The Fe concentrate assaying 64.52 % was obtained with Fe recovery of 80.66%, for the Fe content of feed equal to 52.98%.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 724-736
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on pre-concentration efficiency of wolframite from tungsten ore using gravity and magnetic separations
Autorzy:
Lu, D.
Wang, Y.
Jiang, T.
Sun, W.
Hu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/109597.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
tungsten ore
pre-concentration
separation efficiency
gravity separation
magnetic separation
Opis:
Pre-concentration is effectively applied in recovering wolframite from tungsten ore, due to its benefits of further upgrading tungsten ore and improving separation efficiency. The most important pre-concentration techniques for tungsten ore include gravity separation and magnetic separation, based on the fact that there are appreciable differences, between the desired wolframite and the gangue minerals, in density and magnetic susceptibility. This study investigated the separation efficiency of gravity pre-concentration (Falcon Concentrator) and high-gradient magnetic pre-concentration (SLon VPHGMS) for the beneficiation of a Canada tungsten ore. It is a low-grade type of ore with high silica and arsenic content, and an average content of WO3 is about 0.45%. The optimum conditions for different operational parameters of two pre-concentration separators were studied on this low-grade material. The results presented in this paper suggested that although both pre-concentration techniques were effective for producing pre-concentrates containing high WO3, magnetic pre-concentration showed significantly better separation efficiency. Over 90% of the feed was rejected as the final tailings, meanwhile, over 85% of arsenic minerals were removed with tailings, while the WO3 loss was less than 15%.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 2; 718-728
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Catalytic oxidation of lignin to aromatics over salen-porphyrin complex as a biomimetic catalyst
Autorzy:
Lu, X.-J.
Zhou, X.-F.
Zhu, Z.-L.
Sun, Y.
Tang, K.
Lei, F.-H.
Liu, Z.-G.
Wang, T.
Powiązania:
https://bibliotekanauki.pl/articles/52771.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Drewna
Źródło:
Drewno. Prace Naukowe. Doniesienia. Komunikaty; 2019, 62, 203
1644-3985
Pojawia się w:
Drewno. Prace Naukowe. Doniesienia. Komunikaty
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Early and Middle Frasnian brachiopod faunas and turnover on the South China shelf
Autorzy:
Ma, X -P
Becker, R.T.
Li, H.
Sun, Y.-Y.
Powiązania:
https://bibliotekanauki.pl/articles/21029.pdf
Data publikacji:
2006
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
Early Frasnian
Middle Frasnian
Frasnian
paleontology
brachiopod fauna
South China shelf
Devonian
Brachiopoda
Cyrtospirifer
faunal turnover
Opis:
The first appearance of the brachiopod Cyrtospirifer and related forms in the Late Devonian of South China significantly postdates the beginning of the Frasnian and the entry of the group in other parts of the world. Scattered data from different sections suggest that its first entry, associated with the emergence of other plicate spiriferids, such as theodossid and conispiriferid brachiopods, was late in the Middle Frasnian. At the same time, many rhynchonellids disappeared or became extinct locally in South China. This brachiopod faunal overturn near the Palmatolepis punctata–Early Pa. hassi zonal boundary is the most significant event in the Early–Middle Frasnian of South China, characterized by about a 35% loss of existing species and the flourishing of the plicate spiriferids, which was coeval with the end of a major biogeochemical perturbation recently recognized in the Pa. punctata Zone. By contrast, atrypid brachiopods do not seem to show any significant diversity change. The brachiopod faunal change was probably related to a (local?) transgressive event in South China, which also brought new pelagic faunas northwards into some intra−shelf deeper water areas, such as the Shetianqiao area in central Hunan Province. Fifteen brachiopod species are described and illustrated, which include some taxa that are first recorded or recognized in South China, e.g., the spiriferid Pyramidaspirifer, which is now known from both North America and South China. One new species, Desquamatia qiziqiaoensis, is erected.
Źródło:
Acta Palaeontologica Polonica; 2006, 51, 4; 789-812
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A new docodont mammal from the Late Jurassic of the Junggar Basin in Northwest China
Autorzy:
Pfretzschner, H-U
Martin, T.
Maisch, M.W.
Matzke, A.T.
Sun, G.
Powiązania:
https://bibliotekanauki.pl/articles/945778.pdf
Data publikacji:
2005
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
docodonta
dsungarodon
occlusion
jurassic
qigu formation
junggar basin
Opis:
Fieldwork in the early Late Jurassic (Oxfordian) Qigu Formation of the Junggar Basin in Northwest China (Xinjiang Autonomous Region) produced teeth and mandibular fragments of a new docodont. The new taxon has a large “pseudotalonid” on the lower molars, and by retention of crest b−g exhibits closer affinities to Simpsonodon and Krusatodon from the Middle Jurassic of Europe than to the other known Asian docodonts Tashkumyrodon, Tegotherium, and Sibirotherium. It differs from the Haldanodon–Docodon−lineage by the “pseudotalonid” and large cusps b and g. A PAUP analysis based on lower molar characters produced a single most parsimonious tree with two main clades. One clade comprises Docodon, Haldanodon, and Borealestes, and the other Dsungarodon, Simpsonodon, and Krusatodon plus the Asian tegotheriids. Analysis of the molar occlusal relationships using epoxy casts mounted on a micromanipulator revealed a four−phase chewing cycle with transverse component. The molars of the new docodont exhibit a well developed grinding function besides cutting and shearing, probably indicating an omnivorous or even herbivorous diet. A grinding and crushing function is also present in the molars of Simpsonodon, Krusatodon, and the Asian tegotheriids, whereas Borealestes, Haldanodon, and Docodon retain the plesiomorphic molar pattern with mainly piercing and cutting function.
Źródło:
Acta Palaeontologica Polonica; 2005, 50, 4; 799-808
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Shear properties of a honeycomb structure with zero Poisson’s ratio
Autorzy:
Song, L.
Sun, Y.
Han, Z.
Wang, T.
Wang, H.
Yin, C.
Shen, X.
Powiązania:
https://bibliotekanauki.pl/articles/38697109.pdf
Data publikacji:
2023
Wydawca:
Instytut Podstawowych Problemów Techniki PAN
Tematy:
honeycomb structure
zero Poisson’s ratio
shear properties
small deformation
large deformation
Opis:
Honeycomb structures with zero Poisson’s ratio show promising potential for application in variable-sweep wing aircraft. The shear properties of these honeycomb structures serve as a crucial indicator of their morphing capacity. This paper derives the linear and non-linear shear properties of a honeycomb structure with zero Poisson’s ratio. A modified factor is introduced to establish a relationship between the linear and non-linear shear modulus of the honeycomb structure, simplifying the calculation method of the non-linear shear modulus. The validity of theoretical predictions is then confirmed using the finite element method Furthermore, the influences of the geometric parameters on the shear properties of the honeycomb structure with zero Poisson’s ratio are investigated, highlighting the varying contributions of these cell geometric parameters to the shear properties.
Źródło:
Archives of Mechanics; 2023, 75, 5; 521-541
0373-2029
Pojawia się w:
Archives of Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies