Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Sukhov, V." wg kryterium: Autor


Wyświetlanie 1-4 z 4
Tytuł:
Experimental Research of Tandem-Scheme UAV Model Aerodynamic Characteristics
Autorzy:
Masko, O. M.
Kryvokhatko, I. S.
Sukhov, V. V.
Powiązania:
https://bibliotekanauki.pl/articles/213671.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
UAV
tandem-scheme
aerodynamic characteristics
wingspan
stagger
dihedral angles
Opis:
Tandem-wing aerodynamic scheme became widespread for tube launch UAV due to possibility of required flight performance realization under tight dimension constraints. In this work results of wind tunnel weight and visual tests of UAV model with wingspans about 1 m are presented. Model aerodynamic characteristics were defined by six-component wind tunnel balance at Mach number 0.075 and Reynolds number 187 000 calculated for one wing chord of 0.11 m. Model stagger (390, 490, 590 mm), rear wing dihedral angle (0°, -5°, -9°), forward-to-rear wingspan ratio (0.67; 0.9; 0.92; 1.24) were variable. It was determined that model is longitudinal and directional static stable, has high maximal lift-drag ratio (in range from 10.6 to 13.7) and acceptable maximal lift coefficient without flaps (from 1.05 to 1.09) and critical angle of attack (from 15.1 to 16.4°). Stagger increasing leads to zero or positive maximal lift-drag ratio increasing. If forward wing span is larger than rear wing span than stagger increasing is more effective with zero dihedral angle. If rear wing span is larger than forward wing span than stagger increasing is more effective with negative dihedral angle.
Źródło:
Prace Instytutu Lotnictwa; 2014, 4 (237) December 2014; 63-75
0509-6669
2300-5408
Pojawia się w:
Prace Instytutu Lotnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Inner Size Effect in Layered Films with Eutectic Interaction of Components
Autorzy:
Dukarov, S.
Petrushenko, S.
Sukhov, V.
Churilov, I.
Samsonik, A.
Skryl, O.
Powiązania:
https://bibliotekanauki.pl/articles/1030004.pdf
Data publikacji:
2018-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
inner size effect
multilayer films
interfacial energy
Opis:
The results of the study of melting of Bi-Sn and Pb-Sn polycrystalline layered film systems with the thickness of 200-400 nm on a substrate with temperature gradient are given. Multilayer (each layer is of 10-20 nm) and bilayer films (layers are of 100-200 nm) of the same total thickness have been investigated. Broadening of the melting range in all films and lowering of melting point in multilayer samples compared to the bilayer ones have been observed. The observed phenomena are discussed within existing thermodynamic concepts in consideration of interfacial energy of contacting layers of components and energy of grain boundaries in polycrystalline films.
Źródło:
Acta Physica Polonica A; 2018, 133, 5; 1186-1190
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Finite element modelling of contact interaction between wheel and rail with three-layered thin coating
Modelowanie MES współpracy kontaktowej koła i szyny pokrytej trzema warstwami cienkich powłok
Autorzy:
Kolesnikov, V.
Chebakov, M.
Nasedkin, A.
Sukhov, D.
Powiązania:
https://bibliotekanauki.pl/articles/374883.pdf
Data publikacji:
2010
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
zagadnienie kontaktowe
metoda elementów skończonych
ANSYS
powłoka cienka
współpraca koło-szyna
contact problem
finite element method
thin coating
wheel-rail interaction
Opis:
The stress-strain of thin multilayered coatings covered the surface of the rail is studied near the region of side contact in turning motion. The stress-strain state is studied for various geometric and mechanical coating parameters' values. A theoretical and a finite element models are developed. Stress-strain state analysis has been made based on models developed and recommendations were given for an optimal coating parameters' selection.
Źródło:
Transport Problems; 2010, 5, 2; 119-124
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie analizy fotogrametrycznej oraz wskaźnika Hazena do oceny fragmentacji urobku w rosyjskich kopalniach rud
Application of Photogrammetry Analysis and Hazen’s Index in Evaluation of Muck Pile Fragmentation Obtained in Russian Ore Mines
Autorzy:
Mustafin, V.
Biessikirski, A.
Terpak, D.
Roma-Nov, V.
Sukhov, D.
Powiązania:
https://bibliotekanauki.pl/articles/319331.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
fragmentacja
krzywa składu ziarnowego
Split Desktop 2.0
system blokowy z wypuszczaniem urobku
fragmentation
cumulative size distribution
block caving mining method
Opis:
W artykule przedstawiono zastosowanie techniki fotogrametrycznej w ruchu rosyjskich zakładów górniczych prowadzących eksploatacje rud metali i diamentów. Analizy z wykorzystaniem oprogramowania komputerowego Split Desktop 2.0. przeprowadzono dla trzech różnych usypów urobku otrzymanych z ostatniej fazy wypuszczanej warstwy kompensacyjnej. Dodatkowo w artykule przedstawiono ocenę jednorodności usypu przy użyciu wskaźnika Hazena stosowanego w Rosji jako wskaźnika umożliwiającego dodatkową ocenę prowadzonych robót strzałowych. Na podstawie przeprowadzonych badań zauważono, że średnia ważona wielkość brył w odstrzelonym urobku znajduje się w zakresie wielkości przyjętych przez kopalnię. Otrzymany podczas analizy wskaźnik Hazen wskazuje zaś, że analizowane usypy są wielofrakcyjne co można tłumaczyć sposobem prowadzenia eksploatacji.
The application of photogrammetry analysis in evaluation of the muck pile fragmentation of Russian diamond and nickel ore mines was presented in the article. The evaluation was per-formed in the Split Desktop 2.0 software based on the photographic documentation of three different muck piles obtained from the last phase of sublevel caving. Moreover calculation of the Hazen index which may be applied in Russia as an additional tool to evaluate blasting works was included. According to performed analysis it can be observe that the average grain diameters were in the optimum range. Furthermore the Hazen index shows that all analyzed muck piles should be evaluated as various grain size. This could be explained by the type of exploitation system which was used during ore extraction. In publications, there is a review of the knowledge related to salt flotation and it presents the results of the analysis of the efficiency of the flotation process for coal as a raw material. The qualitative parameters of the enrichment products were evaluated based on flotation tests that were carried out for variable pulp salinity conditions. The main aim was to determine the impact of technolo¬gical water quality on the course and effectiveness of the flotation process.
Źródło:
Inżynieria Mineralna; 2017, R. 18, nr 2, 2; 293-301
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-4 z 4

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies