- Tytuł:
- The effect of PWHT on weld properties of titanium alloy for refurbishment of aircraft engine exhaust cone
- Autorzy:
-
Ardy, H.
Yoewono, S.
Sugianto, A. - Powiązania:
- https://bibliotekanauki.pl/articles/248139.pdf
- Data publikacji:
- 2012
- Wydawca:
- Instytut Techniczny Wojsk Lotniczych
- Tematy:
-
engine exhaust cone
Ti-6Al-4V
GTAW
PWHT
microstructure
grain size
stress analysis - Opis:
- The mounting bolt hole of aircraft engine exhaust cone was found cracked in the weld area. Exhaust cone material is alfa/beta titanium (Ti-6Al-4V) alloy. The cracked section will be repaired by welding to restore its function. The purpose of this research is to evaluate the effect of post weld heat treatment (PWHT) on ductility, grain size, and shear strength of Ti-6Al-4V plates (0.063 in. thickness) welded by gas tungsten arc welding (GTAW) using commercial purity (CP) titanium wire electrode (AMS 4951H). The weld quality was evaluated by non-destructive and destructive tests, using the acceptance criteria of AWS D17.1 and AWS B2.1 as references. The effect of PWHT was examined by preparing two weld specimens: with and without PWHT at 620 centigrade. Non-destructive inspection by dye penetrant and xray radiography tests revealed that the weld in these two specimens is free from surface and internal defects. Weld specimen without PWHT is brittle and failed during fillet break test, whereas PWHT specimen is ductile and pass the same test. Metallography observation was conducted to measured grain size of base metal and heat affected zone (HAZ). The average grain size of PWHT specimen is 18.40 mi m on base metal and 36.80 mi m on HAZ, and for non-PWHT specimen is 26.85 mi m on base metal and 52.10 mi m on HAZ. Using Hall-Petch approach, the yield strength is calculated about 920 MPa on the base metal of PWHT specimen, which result in the shear strength of about 531 MPa. Under static loading, the shear stress on the outer surface of exhaust cone due to exhaust gas is about 38 MPa, which is much lower than material shear strength.
- Źródło:
-
Journal of KONES; 2012, 19, 1; 9-14
1231-4005
2354-0133 - Pojawia się w:
- Journal of KONES
- Dostawca treści:
- Biblioteka Nauki
Artykuł