Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Su, X." wg kryterium: Autor


Tytuł:
Time-Resolved and Near-Field Scanning Optical Microscopy Study on Porphyrin J-Aggregate
Autorzy:
Miura, A.
Matsumura, K.
Su, X.
Tamai, N.
Powiązania:
https://bibliotekanauki.pl/articles/1993153.pdf
Data publikacji:
1998-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.47.+p
Opis:
Water-soluble porphyrin, 5,10,15,20-tetraphenyl- 21H,23H-porphine-tetrasulfonic acid (TPPS), forms J-aggregate in aqueous solution depending on experimental conditions such as pH, dye concentration, and/or ionic strength. The steady-state fluorescence and picosecond single-photon timing spectroscopy were applied for protonated monomer and J-aggregate in aqueous solution and in thin films to reveal the dynamics in the S$\text{}_{2}$ and S$\text{}_{1}$ states. The S$\text{}_{2}$ fluorescence spectra from the protonated monomer and J-aggregate were observed in addition to the normal S$\text{}_{1}$ fluorescence. The lifetime of the S$\text{}_{2}$ state was estimated to be ≈5 ps for J-aggregate, whereas the lifetime is shorter than 1 ps for protonated TPPS monomer. The mesoscopic structures of J-aggregate in thin film with and without polymer on the glass surface were examined by scanning near-field optical microscopy. With the surface topography and scanning near-field optical microscopy transmission images, TPPS J-aggregate was found to form a long and narrow tube-like structure which has a few μm length, 0.2-0.5 μm width, and 5-30 nm height. An unidirectional orientation of the structure was also found, which may be originated from the spin-coating process.
Źródło:
Acta Physica Polonica A; 1998, 94, 5-6; 835-846
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of synthesis conditions on the synthesis of carbon nanofibers by ethanol catalytic combustion
Wpływ warunków syntezy na syntezę nanowłókien węglowych metoda katalitycznego spalania etanolu
Autorzy:
Cheng, J.
Zou, X. P.
Zhu, G.
Wang, M. F.
Su, Y.
Yang, G. Q.
Lu, X. M.
Powiązania:
https://bibliotekanauki.pl/articles/354282.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
synteza
nanowłókna węglowe
spalanie
etanol
carbon nanofibers
ethanol catalytic combustion
influence factors
Opis:
In this paper, the effects of position of substrates in flames, preparation time, stability of flames and catalyst precursors on the synthesis of carbon nanofibers (CNFs) by ethanol catalytic combustion (ECC) were investigated. For investigating the effects of these influence factors on the synthesis of CNFs, several sets of controlled experiments were performed, such as preparation experiments with different position of substrates in flames, different preparation time, stable and unstable flames, and different catalyst precursors. In our experiments, the catalyst precursors were iron nitrate, cobalt nitrate, nickel nitrate, and iron chloride, cobalt chloride, nickel chloride. The as-synthesized products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy. Our results indicate that the optimal position of substrates in flames is more than 1cm and less than 2.5cm, the optimal preparation time is more than 5min and less than 30min for massive yield, stable flames would be tent to synthesize CNFs with mainly single-type morphology and could improve the graphitization of CNFs, and the catalyst precursors obviously have effects on the synthesis of CNFs.
W niniejszej pracy zbadany został wpływ położenia substratów w płomieniach, czasu przygotowania, stabilności płomieni i prekursorów katalizatora na syntezę nanowłókien węglowych (CNFs) metodaą katalitycznego spalania etanolu (ECC). W celu zbadania wpływu tych czynników na syntezę nanowłókien węglowych przeprowadzono kilka zestawów kontrolowanych eksperymentów, przy różnej pozycji podłoży w płomieniach, różnym czasie przygotowania, płomieniach stabilnych i niestabilnych i przy użyciu różnych prekursorów katalizatora. W naszych eksperymentach jako prekursory katalizatora stosowano azotany: żelaza, kobaltu i niklu oraz chlorki żelaza, kobaltu i niklu. Tak otrzymane produkty syntezy scharakteryzowano za pomocą skaningowej mikroskopii elektronowej (SEM), transmisyjnej mikroskopii elektronowej (TEM) i spektroskopii Raman'a. Nasze wyniki wskazują, że optymalna pozycja podłoży w płomieniach to więcej niż 1 cm i mniej niż 2,5 cm, a optymalny czas przygotowania to więcej niż 5 min i mniej niż 30 min dla dużej wydajności. Stabilność płomieni będzie sprzyjać syntezie nanowłókien o morfologii jednego typu i może poprawić ich grafityzacje, a rodzaj prekursora katalizatora ma wpływ na syntezę nanowłókien.
Źródło:
Archives of Metallurgy and Materials; 2012, 57, 3; 745-751
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Forecast model for real time reliability of storage system based on periodic inspection and maintenance data
Model do prognozowania niezawodności systemu magazynowania w czasie rzeczywistym w oparciu o dane z przeglądów okresowych oraz dane eksploatacyjne
Autorzy:
Su, Ch.
Zhang, Y. J.
Cao, B. X.
Powiązania:
https://bibliotekanauki.pl/articles/301915.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
niezawodność magazynowania
niezawodność w czasie rzeczywistym
okresowe przeglądy i obsługa
dane cenzurowane
storage reliability
real-time reliability
periodic inspection and maintenance
censored data
Opis:
In recent years, storage reliability has attracted much attention for increasing reliability requirement. In this paper, forecast models for real-time reliability of storage system under periodic inspection and maintenance are presented, which is based on the theories of reliability physics and exponential distribution. The models are developed under two newly-defined imperfect repair modes, i.e., Improved As Bad As Old (I-ABAO) and Improved As Good As New (I-AGAN). A completion method for censored life data is also proposed by averaging the residual lifetime. According to the complete and censored lifetime data, parameters in the models are estimated by applying maximum likelihood estimation method and iterative method respectively. A numerical example of a storage system is given to verify the feasibility of the proposed completion method and the effectiveness of the two models.
W ostatnich latach wiele uwagi poświęcono tematyce niezawodności magazynowania w odniesieniu do zwiększania wymogu niezawodności. W prezentowanym artykule, przedstawiono modele do prognozowania w czasie rzeczywistym niezawodności systemu magazynowania podlegającego przeglądom okresowym i obsłudze. Modele oparto na teoriach z zakresu fizyki niezawodności oraz na rozkładzie wykładniczym. Proponowane modele opracowano dla dwóch nowo zdefiniowanych opcji niepełnej odnowy, t.j. Improved-As Bad As Old (Jak Tuż Przed Uszkodzeniem - Wersja Udoskonalona) oraz Improved-As Good As New (Jak Fabrycznie Nowy - Wersja Udoskonalona). Zaproponowano także metodę uzupełniania danych cenzurowanych (uciętych) dotyczących trwałości polegającą na uśrednianiu trwałości resztkowej. Zgodnie z pełnymi i cenzurowanymi danymi trwałościowymi, parametry w proponowanych modelach ocenia się, odpowiednio, z zastosowaniem estymacji metodą największej wiarygodności oraz metody iteracyjnej. Poprawność przedstawionej metody uzupełniania oraz efektywność proponowanych dwóch modeli zweryfikowano na podstawie numerycznego przykładu systemu magazynowania.
Źródło:
Eksploatacja i Niezawodność; 2012, 14, 4; 342-348
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation Model for the Absorption Coefficients of Double Layered Nonwovens
Model symulacyjny dla oceny współczynników absorpcji dźwięku dwuwarstwowych włóknin
Autorzy:
Liu, X.
Liu, J.
Su, X.
Powiązania:
https://bibliotekanauki.pl/articles/232501.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
współczynnik absorpcji
dwuwarstwowa włóknina
model symulacyjny
absorption coefficient
double layered nonwovens
simulation model
Opis:
In this paper, a more general sound absorption model for double layered nonwovens is proposed firstly by using the theory of C. Zwikker and C. W. Kosten for sound propagation through porous flexible media and sound propagation boundary conditions, and then a model simulation is detailed by changing the effective structure parameters of nonwovens. Double layered nonwovens composed of polyester fiber in the outer layer and nylon fiber in the inner layer is investigated in detail and the effects of acoustic parameters including the thickness and porosity of each layer on the absorption coefficient are analysed by numerical calculation, respectively. It shows that a double layered sound absorbing structure made of nonwovens has excellent sound absorption and can afford a sufficiently satisfying sound absorption level in a cared frequency range. In theory, this model can be used to calculate the absorption coefficients of double layered nonwovens composed of two different nonwoven materials . In practice, the sound absorption model for double layered nonwovens provides theoretical support for high performance sound absorber design and manufacture.
Zaproponowano zastosowanie ogólnego modelu absorpcji dźwięku dla dwuwarstwowych dzianin opartego na teorii C. Zwikkera i C. W. Kostena. Model uwzględnia propagacje fal przez porowate odkształcalne media przyjmując odpowiednie warunki brzegowe charakterystyczne dla danego układu. Symulacja modelu została podzielona w zależności od zmiennych struktur obiektu. Dwuwarstwowe włókniny składały się z wewnętrznej warstwy włókien poliestrowych oraz zewnętrznej włókien nylonowych. Analizowano współczynniki absorpcji fal dźwiękowych badając wpływ grubości warstw oraz ich porowatości. Stwierdzono, że można uzyskać dobre właściwości tłumiące dla odpowiedniej konfiguracji warstw w określonym, ograniczonym zakresie częstotliwości. Za pomocą przedstawionego modelu można teoretycznie obliczyć współczynniki absorpcji dwuwarstwowych układów włóknin.
Źródło:
Fibres & Textiles in Eastern Europe; 2012, 4 (93); 102-107
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of large particle sizes using a machine vision system
Autorzy:
Zhang, Z.
Yang, J.
Su, X.
Ding, L.
Powiązania:
https://bibliotekanauki.pl/articles/109404.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
machine vision
particle size distribution
equivalent ellipse
best-fit rectangle
representing analysis
Opis:
Many methods based on machine vision were used to estimate coarse particles size distribution in recent years, but comparison of accuracy parameters representing particle size has not been carried out and a related representing analysis has not been yet proposed. Nine parameters were investigated. The results indicated the minor axis of equivalent ellipse and breadth of the best-fit rectangle were the most suitable for representing particle size. The former accuracy ratio was 86.43% and the latter accuracy ratio was 85.39%, while the accuracy of other parameters was less than 70%. A related representing analysis was proposed to explain this phenomenon. This research is instructive and meaningful for the size distribution estimation by machine vision.
Źródło:
Physicochemical Problems of Mineral Processing; 2013, 49, 2; 397-405
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Convergence Point of Three-strand Yarn Spinning
Punkt zbieżności przy przędzeniu przędz trójtaśmowych
Autorzy:
Su, X.
Gao, W.
Liu, X.
Xie, C.
Huang, B.
Powiązania:
https://bibliotekanauki.pl/articles/232053.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
three-strand yarn spinning
theoretical model
convergence point
przędzenie przędz trójtaśmowych
model teoretyczny
punkt zbieżności
Opis:
A theoretical model for the three-strand yarn spinning system is obtained by using the analysis method for the two-strand case presented by He et al. and setting a series of virtual intermediate variables. Then the convergence point of the three-strand yarn spinning is obtained by eliminating the intermediate variables.
Opracowano teoretyczny model systemu przędzenia trójtaśmowej przędzy z wykorzystaniem modelu przędzy dwutaśmowej przedstawionego przez He i innych. Wprowadzono serię teoretycznych zmiennych przejściowych, a następnie ustalono punkt zbieżności dla systemu przędzenia przędzy trójtaśmowej przez eliminacje zmiennych pośrednich.
Źródło:
Fibres & Textiles in Eastern Europe; 2013, 3 (99); 48-50
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dispersion-compensating en/decoder for a time-spreading/wavelength-hopping optical code-division multiplexing (OCDM) system
Autorzy:
Zheng, J.
Wang, R.
Pu, T.
Lu, L.
Fang, T.
Su, Y.
Li, L.
Yang, Q.
Chen, X.
Powiązania:
https://bibliotekanauki.pl/articles/174365.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
optical code-division multiplexing (OCDM)
fiber Bragg grating (FBG)
dispersion
Opis:
A novel dispersion-compensating fiber Bragg grating (FBG)-based en/decoder is proposed to compensate both the out-band and in-band dispersion in a time-spreading/wavelength-hopping (TS/WH) optical code-division multiplexing (OCDM) system. The experimental realization of such en/decoders only needs a uniform-pitch phase mask and a sub-micrometer precision moving stage. Such an en/decoder pair with the ability of compensating the dispersion of transmission in 20-km single mode fiber (SMF) is simulated and experimentally fabricated. Both the simulation and experimental results show that the decoded pulse can be recovered without any distortion owing to the elimination of dispersion.
Źródło:
Optica Applicata; 2013, 43, 3; 485-495
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of the Horizontal offset of the Ring Spinning Triangle on Yarn
Wpływ poziomego ustawienia trójkąta przędącego na jakość przędzy
Autorzy:
Liu, X.
Su, X.
Wu, T
Powiązania:
https://bibliotekanauki.pl/articles/233337.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
spinning triangle
fibre tension distributions
horizontal offset
yarn
trójkąt przędący
rozkład naprężeń włókien
jakość przędzy
Opis:
The spinning triangle is a critical region in the spinning process of yarn. Its geometry influences the distribution of fibre tension in the spinning triangle and, thus, affects the properties of spun yarns. Therefore, taking appropriate measures to influence the spinning triangle geometry and thus improve the quality of yarn has attracted great interesting in recent years. During the geometry parameters, the horizontal offset of the twisting point to the symmetric axis of the nip line of the spinning triangle d has attracted more and more attention and is considered as one of the most critical factors influencing the quality of yarn. Therefore, in this paper, the effects of the horizontal offset d of the ring spinning triangle on yarn qualities is investigated. Firstly a theoretical model of the fibre tension distributions in the spinning triangle is given. Relationships between the fibre tension and horizontal offset of the spinning triangle are analysed theoretically. Secondly, as an application of the model proposed, the spinning triangles of a modified ring spinning system with a pair of offset devices which can change the horizontal offset ‘d’ continuously are studied. The distributions of fibre tension in the spinning triangle are simulated numerically, with the horizontal offset varying continuously. Furthermore the properties of spun yarns produced by the modified system are evaluated and analysed by using the simulation results.
Trójkąt przędący jest istotnym parametrem w procesie przędzenia. Jego geometria wpływa na rozkład naprężeń włókien w trójkącie przędącym, co oddziałuje na właściwości przędzy. Dlatego w ostatnich latach dużym zainteresowaniem cieszą się badania nad wpływem geometrii trójkąta przędącego w celu uzyskania możliwie najwyższej jakości. Konfiguracja geometryczna, w tym poziome przesunięcie trójkąta przędącego odgrywają coraz większą rolę w analizach procesu przędzenia obrączkowego. Autorzy przedstawili teoretyczny model rozkładów naprężeń włókien w trójkącie przędącym i przeanalizowali teoretyczne zależności pomiędzy naprężeniem włókien a ustawieniem trójkąta przędącego. Przeprowadzono symulację numeryczną i na jej podstawie wyciągnięto wnioski dotyczące jakości produkowanej przędzy.
Źródło:
Fibres & Textiles in Eastern Europe; 2013, 1 (97); 35-40
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Studies on a Three-dimensional Flow Field in Four-Roller Compact Spinning with a Guiding Device
Badania numeryczne trójwymiarowego pola przepływu w czterowałkowym aparacie rozciągowym przędzarki kompaktowej wyposażonej w urządzenie prowadzące
Autorzy:
Liu, X.
Xie, C.
Su, X.
Mei, H.
Powiązania:
https://bibliotekanauki.pl/articles/233593.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
four-roller compact spinning
guiding device
3D flow field
numerical simulation
fluent
kompaktowy układ czterorolkowy
urządzenie prowadzące
pole przepływu 3D
symulacja numeryczna
analiza pola przepływu
Opis:
Research on the flow field in the fibre-converging zone is always the emphasis and difficulty of compact spinning. Therefore in this work numerical studies on the three-dimensional flow field in four-roller compact spinning with a guiding device were carried out using Fluent software. First a three-dimensional physical model of the fibre-converging zone was obtained using AutoCAD software. Then numerical simulations of the three-dimensional flow field in four-roller compact spinning with and without a guiding device were presented, respectively, using Fluent software. It was shown that the negative pressure is chiefly concentrated near the air-suction flume, and the velocity reaches the maximum on the centre line. Comparing with the flow field in compact spinning without a guiding device, the effective range of negative pressure in four-roller compact spinning with a guiding device increases significantly and negative pressure use efficiency improves accordingly. Furthermore the optimal installation position of the guiding device was studied, and it was shown that the optimal installation position is closely related to the linear density of the spun yarn. Finally the theoretical results obtained were illustrated by experiments.
Podstawową trudnością w przędzeniu kompaktowym jest analiza pola przepływu strumienia włókien, którą przeprowadzono korzystając ze specjalnego oprogramowania – Fluent Software. Wstępnie opracowano model fizyczny procesu korzystając z systemu AutoCAD. Wykazano, że podciśnienie jest głównie skoncentrowane w pobliżu kanałów zasysających i prędkość osiąga swoje maksimum w centrum układu. Wykazano korzyści z zastosowania układu czterorolkowego w porównaniu do układu klasycznego i optymalne pozycje rozmieszczenia ściśle uzależnione od masy liniowej produkowanej przędzy. Uzyskane obliczenia teoretyczne porównano z wynikami praktycznymi.
Źródło:
Fibres & Textiles in Eastern Europe; 2013, 6 (102); 50-57
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on relationship between carbon dioxide emissions, imports, exports, and population in China
Autorzy:
Jin, Q.-Y.
Zhang, J.
Gao, Y.-Q.
Su, X.
Fu, Y.-S.
Powiązania:
https://bibliotekanauki.pl/articles/207318.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
population statistics
carbon dioxide
global warming
carbon dioxide emissions
total carbon
statystyki ludności
dwutlenek węgla
globalne ocieplenie
emisja dwutlenku węgla
węgiel całkowity
Opis:
Empirical relationships between carbon dioxide emission, imports, exports, and population have been investigated. An empirical model with carbon dioxide emissions, structure and scale of import and exports, populations was built Using ridge regression analysis and observed data from 1985 to 2006 in China, we examined the relationship between each part of carbon dioxide emission and corresponding coefficients, including GIV (gross imports value), GXV (gross exports value), and P (populations). The results have shown that the increasing trend in TCOE (total carbon dioxide emissions) was determined by the exports, while its standard level is determined by population. Increasing the imports may reduce TCOE. Considering working to expand economy, the best ways for China to reduce TCOE are to introduce advanced technology and take actions to guarantee strict execution of cut-emission policy. Although the increasing imports also can reduce TCOE, it is not reasonable for the global cut-emission policy. To control population is not applicable as the immense population base, so government's publicity for low-carbon live is a necessary and feasible way to reduce carbon dioxide emission.
Źródło:
Environment Protection Engineering; 2014, 40, 2; 75-85
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Theoretical Study of Yarn Torque Caused by Fibre Tension in the Spinning Triangle
Teoretyczne badania momentu obrotowego przędzy spowodowanego jej napięciem w trójkącie przędzalniczym
Autorzy:
Su, X.
Gao, W.
Liu, X.
Xie, C.
Xu, B
Powiązania:
https://bibliotekanauki.pl/articles/232889.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
ring spinning
spinning triangle
yarn torque
fibre tension
trójkąt przędzalniczy
moment obrotowy przędzy
naprężenie włókien
rdzeń przędzy
Opis:
The spinning triangle is a critical region in the spinning process of staple yarn, the geometry of which plays an important role in determining the physical performance and qualities of spun yarns, especially yarn torque. It has been shown that the fibre tension in the spinning triangle is the most influential factor governing the magnitude of yarn torque. Therefore, in this paper, a theoretical study of yarn torque caused by fibre tension in the spinning triangle is presented. Cases of yarn with one, two, three, four and five feeding strands were investigated, in which the arrangement of fibres was assumed as hexagonal close packing with a single core fibre, two core fibres, three core fibres, four core fibres, and five core fibres at the centre, respectively. Theoretical models of the fibre tension in spinning triangles and corresponding yarn residual torque due to the fibre tension are presented. As an application of the method proposed, 26.5 tex cotton yarns were taken as an example for numerical simulations. Fibre tension in the spinning triangles and corresponding yarn torque were simulated numerically using Matlab software.
Trójkąt przędzalniczy jest istotnym obszarem w procesie przędzenia przędzy z włókien odcinkowych, jego geometria odgrywa ważną rolę w wyznaczaniu właściwości fizycznych oraz jakościowych, zwłaszcza momentu obrotowego przędzy. Wykazano, że naprężenie włókien w trójkącie przędzalniczym znacząco wpływa na wielkość momentu przędzy. Badano przypadki powstawania trójkąta przędzalniczego z jednego, dwóch, trzech, czterech i pięciu strumieni włókien i przy różnych ilościach włókien w rdzeniu przędzy. Badano rozkłady włókien w przędzy oraz powstające siły naprężeń i momenty obrotowe. Sporządzono obliczenia komputerowe i odpowiednie wykresy dla przędzy bawełnianej 26.5 tex.
Źródło:
Fibres & Textiles in Eastern Europe; 2014, 6 (108); 41-50
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Detection of multilayer cavities by employing RC-DTH air hammer system and cavity auto scanning laser system
Wykrywanie pustek obejmujących kilka warstw podłoża przy wykorzystaniu układu złożonego z młota pneumatycznego wgłębnego z odwrotnym obiegiem płuczki RC-DTH i automatycznego układu laserowego do skanowania
Autorzy:
Luo, Y.
Li, L.
Peng, J.
Yin, K.
Li, P.
Gan, X.
Zhao, L.
Su, W.
Powiązania:
https://bibliotekanauki.pl/articles/219542.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
multilayer cavities detection
RC-DTH air hammer
drill bit
cavity auto scanning laser system
wykrywanie pustek przechodzących przez liczne warstwy górotworu
młot pneumatyczny wgłębny z odwrotnym obiegiem płuczki
urządzenie wiertnicze
laserowy skaner pustek
Opis:
The subterranean cavities are seriously threatened to construction and mining safety, and it’s important to obtain the exact localization and dimensions of subterranean cavities for the planning of geotechnical and mining activities. Geophysical investigation is an alternative method for cavity detection, but it usually failed for the uncertainly solution of information and data obtained by Geophysical methods. Drilling is considered as the most accurate method for cavity detection. However, the conventional drilling methods can only be used for single cavity detection, and there is no effective solution for multilayer cavities detection have been reported. In this paper, a reverse circulation (RC) down-the-hole (DTH) air hammer system with a special structured drill bit is built and a cavity auto scanning laser system based on laser range finding technique was employed to confirm the localization and dimensions of the cavities. This RC-DTH air hammer system allows drilling through the upper cavities and putting the cavity auto scanning laser system into the cavity area through the central passage of the drill tools to protect the detection system from collapsing of borehole wall. The RC-DTH air hammer system was built, and field tests were conducted in Lanxian County Iron Ore District, which is located in Lv Liang city of Shan Xi province, the northwest of china. Field tests show that employing the RC-DTH air hammer system assisted by the cavity auto scanning laser system is an efficiency method to detect multilayer cavities.
Podziemne wgłębienia i pustki stanowią poważne zagrożenie dla budowli oraz dla działalności górniczej; dlatego też podstawowym zagadnieniem jest ich dokładna lokalizacja i określenie wymiarów. Jest to niezbędne dla planowania prac geotechnicznych i wydobywczych. Badania geofizyczne są alternatywną metodą wykrywania podziemnych zagłębień, zazwyczaj jednak okazują się nieskuteczne ze względu na niepewność rozwiązań oraz danych uzyskiwanych za pomocą metod geofizycznych. Wykonanie odwiertu jest najdokładniejszą metodą wykrywania zagłębień i pustek, jednakże konwencjonalne metody prowadzenia wierceń pozwalają na wykrycie jednego tylko zagłębienia, nie ma też skutecznego rozwiązania kwestii istnienia zagłębień i pustek przechodzących przez liczne warstwy górotworu. W pracy omówiono zastosowanie układu młota pneumatycznego wgłębnego z odwrotnym obiegiem płuczki, wyposażonego w odpowiednie urządzenie wiertnicze, oraz układu skanera laserowego wykorzystującego technikę dalmierza do potwierdzania lokalizacji pustek i ich wymiarów. Prezentowany młot umożliwia dokonanie odwiertu w zagłębieniach i pustkach znajdujących się w warstwach wierzchnich, następnie w zagłębieniu tym umieszczane jest laserowe urządzenie skanujące powierzchnię komory wprowadzane poprzez główny kanał w urządzeniu wiertniczym, tak by zabezpieczyć skaner na wypadek osunięcia się ścian otworu. Układ składający się z młota pneumatycznego zbudowano i przetestowano w warunkach polowych w zagłębiu miedziowym w okręgu Lanxian, w pobliżu miasta LV Liang w prowincji Shan Xi, w północno-zachodnich Chinach. Badania przeprowadzone w terenie wykazały, że zastosowanie układu złożonego z młota pneumatycznego wgłębnego RC-DTH wraz z laserowym skanerem jest skuteczną metodą wykrywania pustek przechodzących przez liczne warstwy.
Źródło:
Archives of Mining Sciences; 2015, 60, 4; 1041-1052
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of the Correlation between the Structure and Quality of Compact Blend Yarns
Ocena korelacji pomiędzy strukturą i jakością mieszankowych przędz kompaktowych przędzionych dwoma różnymi przędzarkami obrączkowymi
Autorzy:
Li, W.
Su, X.
Zhang, Y.
Xie, C.
Wei, Q.
Powiązania:
https://bibliotekanauki.pl/articles/233941.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
pneumatic compact spinning
blend yarn
hamilton index method
high speed camera
pneumatyczne przędzarki kompaktowe
mieszankowe przędze
Metoda indeksu Hamiltona
szybkobieżna kamera cyfrowa
Opis:
Pneumatic compact spinning is the most widely used compact spinning technology at present, which is implemented by using negative airflow to condense the fibre bundle and decrease the spinning triangle. Roller-type and Lattice apron-type compact spinning are two major kinds of pneumatic compact spinning now. In this paper, blend yarn qualities spun by one kind of roller-type compact spinning: complete condensing spinning (CCS), and one kind of Lattice apron-type compact spinning: 4-line rollers compact spinning (FRCS) were studied and analysed comparatively. First, 28.1, 18.5 and 12.3 tex JC60/T40 blend yarns and 18.5, 14.8 and 11.8 tex JC35/T65 blend yarns were spun on two kinds of compact spinning systems, respectively, and the effects of the blending ratio on yarn qualities were discussed. Then another two kinds of cotton blended yarns - JC60/R40 and JC60/M40 were spun. 28.1, 18.5, 14.8 tex JC60/R40 and 18.5, 14.8, 11.8 tex JC60/M40 were spun on two kinds of compact spinning systems, respectively. Meanwhile the qualities of spun yarns were analysed by using two methods. First with a high speed camera system - OLYMPUS i-speed3 (OLYMPUS Image Co., Ltd., Japan), the condensing process of a fibre strand in the condensing zones were captured and analysed. Second the cross sections of the spun yarns were presented using a Y172 Hardy’s thin cross-section sampling device (Nantong Hongda Experiment Instruments Co., Ltd., China). The corresponding Hamilton Index was then calculated, and the fibre radial distributions in the yarn cross section were analysed. The results show that the fibre condensing effects are increased with an increase in the ratio of cotton fibre on the blended yarn for both kinds of compact spinning, especially the FRCS. Meanwhile with an increase in the ratio of polyester fibre on the blended yarn, the advantage of CCS with respect to yarn qualities increased. For both JC60/R40 and JC60/M40, cotton fibres are transferred to the outer part of the yarn body. However, the fibres in JC60/R40 yarn spun by CCS and those in JC60/M40 yarn spun by FRCS are distributed more randomly.
Przędzenie kompaktowe realizowane na zmodyfikowanych przędzarkach obrączkowych jest obecnie najbardziej rozpowszechnioną techniką przędzalniczą, która została wprowadzona na skalę przemysłową dzięki wykorzystaniu podciśnienia mającego na celu zagęszczenie przetwarzanego w przędzę strumienia włókien oraz zmniejszenie trójkąta przędzenia. Celem prezentowanych przez autorów badań była ocena porównawcza jakości i struktury przędz kompaktowych wytworzonych dwoma systemami kompaktowania. Przedstawiono wyniki badań jakości przędz obrączkowych kompaktowych mieszankowych. Przędze te wyprzędziono z mieszanek bawełny z włóknami poliestrowymi o udziale 65/35, mieszanek bawełny z jedwabiem celulozowym o udziale 60/40 oraz mieszanek bawełny z modalnymi włóknami wiskozowymi o udziale 60/40. Wytworzone przędze analizowano dwoma różnymi metodami. Pierwsza metoda polegała na rejestrowaniu za pośrednictwem szybkobieżnej kamery cyfrowej procesu zagęszczania tasiemki włókien w strefie jej zagęszczania, a następnie analizowaniu struktury tworzącej się przędzy. W drugiej metodzie sporządzano, przy pomocy stanowiska pomiarowego wyposażonego w urządzenie przeznaczone do pobierania próbek oraz mikroskopu, obrazy przekrojów poprzecznych wytworzonych przędz, a także obliczano odpowiednio wskaźniki migracji włókien w przekroju poprzecznym przędzy reprezentowane przez indeksy Hamiltona.
Źródło:
Fibres & Textiles in Eastern Europe; 2015, 6 (114); 55-67
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on the Compact-Siro Spun Yarn Structure
Badanie struktury przędzy kompaktowej typu Siro–Spun
Autorzy:
Su, X.
Gao, W.
Liu, X.
Xie, C.
Xu, B.
Powiązania:
https://bibliotekanauki.pl/articles/949446.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
Compact-Siro spinning
yarn structure
sections
przędza kompaktowa
technologia przędzenia Siro-Spun
przędzarki obrączkowe
struktura przędzy
Opis:
Compact-Siro spinning technology is one of the most widely used spinning methods. It is conducted on a compact ring frame by simultaneously feeding two rovings into the drafting zone at a predetermined separation. In fact, Compact-Siro spinning incorporates the features of both Compact and Siro-spinning systems. In this paper, the structure of Compact- Siro spun yarn is investigated. By using a DZ3 video microscope, the horizontal structure of Compact-Siro spun yarn, Sirospun yarn, Compact yarn and Ring spun yarn were obtained. It is shown that compared with Compact single yarn, Compact-Siro spun yarn has a more compact and clear surface structure, a more uniform and smooth shape, and less hairiness. Then the cross section structure of Compact yarn and Compact-Siro spun yarn were obtained by using Hardy’s Y172 thin cross-section sampling device and the DZ3 video microscope. It is shown that compared with Sirospun yarn, the cross-section of Compact-Siro spun yarn is smoother and closer to being circular. Meanwhile in the Compact-Siro spun yarn body, the fibers of two substrands show axial symmetrical distribution approximately, which is beneficial for spun yarn qualities, especially for improving the yarn evenness and hairiness. Finally the results obtained were illustrated in spinning experiments.
Technologia kompaktowego przędzenia Siro-Spun jest szeroko stosowaną metodą przędzenia. Prowadzona jest na kompaktowych przędzarkach obrączkowych przez równoczesne wprowadzenie dwóch taśm włókien w strefę rozciągu. W rzeczywistości kompaktowe przędzenie Siro-Spun łączy w sobie właściwości przędzenia kompaktowego i Siro-Spun. W pracy, stosując wideo mikroskop DZ3 badano strukturę przędzy otrzymanej przy pomocy różnych metod przędzenia. Wykazano, że najlepsze właściwości ma przędza wykonana za pomocą metody kompakt Siro-Spun, odznaczająca się większą zwartością, równomiernością i mniejszą włochatością. Uzyskane obserwacje potwierdzono wynikami eksperymentalnymi.
Źródło:
Fibres & Textiles in Eastern Europe; 2015, 3 (111); 54-57
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Coupling mechanism and coupling degree measurement model of shipbuilding industry cluster
Autorzy:
Su, Y.
Wang, F.
An, X.
Powiązania:
https://bibliotekanauki.pl/articles/258740.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
coupling mechanism
coupling degree measurement model
shipbuilding industry cluster
Opis:
This article was aimed to analyse the working condition of the coupling mechanism in Chinese shipbuilding industry cluster. Literature review was conducted to unveil the coupling mechanism of shipbuilding industry cluster, providing analysis of the present development of shipbuilding industry. A theoretical model was proposed by using the efficacy function and the capacity of the coupling coefficient while measuring the coupling of the shipbuilding industry cluster. Four coupling characteristics were found including relevant, systemic, diversity, and collaborative in the shipbuilding industry cluster. The shipbuilding industry cluster has two levels of coupling mechanism including the core layer coupling mechanism and the support layer coupling mechanism respectively. The improvement through coupling the core layer, support layer, and the coupling between two levels, is an effective way to achieve long-term stable development in Chinese shipbuilding industry cluster.
Źródło:
Polish Maritime Research; 2016, S 1; 78-85
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies