Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Starosta, M." wg kryterium: Autor


Tytuł:
Force analysis of shoulder joint muscles in the early phase of brain stroke
Autorzy:
Starosta, M.
Kostka, J.
Miller, E.
Powiązania:
https://bibliotekanauki.pl/articles/306827.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
siła mięśni
staw ramienny
udar
dynamometr
muscle force
upper limb
shoulder joint
stroke
dynamometer
Opis:
Upper limb impairment in the early phase of brain stroke is one of the key problems in rehabilitation. An estimation of muscle force can be a helpful factor for functional improvement after a stroke. The primary goals of this study were to determine the muscles with the lowest force in the affected (A) and non-affected (non-A) upper limb. Moreover, the differences between men and women were compared and these values were correlated with age. Methods: One hundred (n = 35 female, n = 65 male) post-stroke patients met the inclusion criteria. The mean age of the study participants was 66.1 years. Muscle force for external and internal rotators of shoulder was measured with handheld dynamometer. Moreover, the correlation coefficients for differences in muscular force with the patient’s age were estimated. Results: Our study reports that the force of the (A) side in relation to the (non-A) was by 37% weaker. We observed about a 40% decrease in the force of the shoulder’s external rotation (female – 42%; male – 41%) and shoulder’s flexion (by 38% – female; 40% – male). Significant correlations between the muscle force and the age of post-stroke patients were also found. It was concluded that about 4 weeks after the first stroke in the patient’s life, the external rotators are the most affected group of shoulder muscles. Conclusions: Neither sex nor the side of the ischemic brain injury influence the muscle force, whereas age determines both muscle force and muscle force deficits. Older post-stroke patients demonstrate fewer deficits in muscle strength than younger ones.
Źródło:
Acta of Bioengineering and Biomechanics; 2018, 20, 3; 107-113
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of parameters of grit blasting conducted Dymet® device 412K to obtain roughness
Autorzy:
Szyfelbain, M.
Charchalis, A.
Starosta, M.
Powiązania:
https://bibliotekanauki.pl/articles/244066.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
roughness
blasting
Dymet® 412K gun
alumina
Opis:
There are several fundamental steps for the technological preparation, which are required to optimize the thermal spray coatings. In order to ensure proper bonding of the coating, important is properly preparation of substrate. The surface of the substrate has to be clean and should have a suitable roughness after previously performed treatment. Knowledge about the effects of process parameters allows designing the coatings obtained with an optimal adherence. Only when all the components of the spraying coating process are used correctly there is possible properly design the technology. The article describes the impact of technological parameters of grit blasting to obtain the roughness of the steel substrate (steel S185) to the process of metallic coatings by cold gas dynamic spraying. Research was carried out by using the Dymet® 412K appliance, designed for applying metal coatings and substrate surface cleaning. Grit blasting is a mechanical method of surface preparation of metal parts. It allows obtaining a high degree of surface cleanliness and a determined roughness. The authors took into account parameters such as operational pressure, spray angle (incidence) of abrasive grit blasting in the axis of the stream and feed rate of used abrasive particles (Al2O3) passed to the nozzle of spray gun. Carried out the multiple regression analysis of the roughness parameters results. It revealed the existence of certain influences and changes of process parameters, which affect on the surface quality. Carried out calculations by using a multiple regression showed that the greatest correlation is between the required roughness and the feed rate of used abrasive particles. The studied roughness was described by the parameters: Ra, Rz, Rt and RSm. Stepped growth (from 0.1 to 0.8 g/s) of abrasive particles feed rate caused a decline of all of the roughness parameters. It has been found that the values of the roughness in the least depend on the operational pressure.
Źródło:
Journal of KONES; 2016, 23, 4; 521-526
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of upper limb muscle strength in the early phase of brain stroke
Autorzy:
Starosta, M.
Kostka, J.
Redlicka, J.
Miller, E.
Powiązania:
https://bibliotekanauki.pl/articles/306344.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
siła mięśni
kończyna górna
udar
dynamometr
muscle strength
upper limb
stroke
dynamometer
Opis:
Purpose: The aim of this study was to determine the muscles with the lowest strength in nonaffected (non-A) and affected upper limb (A), to assess differences between men and women and to correlate these values with age in patients after stroke. Methods: Sixty hospitalized in Neurorehabilitation Ward patients (40 male, 20 female), 1-2 weeks after stroke, were enrolled to the study. Their age ranged from 50 to 80 years with a mean (sd) of 65,5 (18,7) years. Muscle force values from upper limb muscles were measured using the MicroFet 2 hand-held dynamometer. The results are displayed in newtons [N], mean values of muscular force, effect sizes and confidence intervals displayed as Cohen’s d and 95% CI were determined. Moreover, we made the coefficients correlation for differences in muscular force versus the Rivermead Motor Assessment (RMA) arm section. Results: Strength of (A) upper limb in comparison to (non-A) was 39% weaker. The severely affected muscle groups were the shoulder flexion 41% (women) versus 46% (men); elbow flexion 39% (women) versus 31% (men); wrist extension 36% (women) versus 42% (men). No significant correlations were found between muscle strength results and RMA or age. Conclusions: Muscle force of (A) upper limb after stroke demonstrates 39% decrease. Men show more significant decrease than women (40% vs 35%). Functional assessment in RMA values show the better results in women (4,9 ± 4,1) than men (3,4 ± 3,2).
Źródło:
Acta of Bioengineering and Biomechanics; 2017, 19, 3; 85-91
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Natural xenobiotics inducing apoptosis in hepatoma cells: in vitro study
Naturalne ksenobiotyki indukujące apoptozę w komórkach nowotworu złośliwego wątroby - badania in vitro
Autorzy:
Starosta, M.
Tyszka-Czochara, M.
Bukowska-Strakova, K.
Dołhańczuk-Śródka, A.
Powiązania:
https://bibliotekanauki.pl/articles/127107.pdf
Data publikacji:
2018
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
xenobiotics
(+)-catechin
(-)-epigallocatechin gallate
apoptosis
cancer
flow cytometry
ksenobiotyki
(+)-katechina
(-)-galusan epigallokatechiny
apoptoza
nowotwory
cytometria przepływowa
Opis:
The term “xenobiotics” refers to substances which are not produced within the human body, but may occur in human environment. Some of biologically active chemicals may be synthesized by plants. Many studies have been conducted with regard to plant secondary metabolites and the beneficial impact of various plant-derived compounds on human health has been demonstrated. Recent research have shown chemopreventive properties of catechins. (+)-catechin ((2R,3S)-2-(3,4-dihydroxyphenyl)-3,4-dihydro-2H-chromene-3,5,7-triol) and (-)-epigallocatechin gallate (EGCG; [(2R,3R)-5,7-dihydroxy-2-(3,4,5-trihydroxyphenyl)chroman-3-yl] 3,4,5-trihydroxybenzoate) are compounds abundant in daily human nutrition. Growing body of evidence reports pro-apoptotic effects of catechins. Both catechins have been shown to modulate intracellular pathways network in tumor cells thereby regulating signaling cascades, which results in programmed death of cancer cells, apoptosis. Apoptosis is one of the most potent mechanisms to defense against cancer. During apoptosis, the activation of caspases results in biochemical and morphological changes associated with specific changes in cell phenotype. Besides apoptosis, tumor cells may be also eliminated from organism via necrosis, however the latter process may evoke local inflammation, which in turn may result in detrimental effects within the body. Xenobiotics with potential to cause apoptosis of cancer cells may be considered in modern combined anticancer therapies and/or to assist existing treatments.
W środowisku występują substancje obce o charakterze ksenobiotyków, czyli związków chemicznych niesyntetyzowanych w sposób naturalny w ciele człowieka. Wiele takich aktywnych biologicznie związków może być produkowanych przez rośliny. Przeprowadzone dotychczas badania wskazują, że drugorzędowe metabolity roślinne mogą wywierać pozytywny wpływ na zdrowie człowieka. Na przykład wyniki ostatnich obserwacji potwierdziły chemoprewencyjne właściwości katechin. (+)-katechina (ang. (2R,3S)-2-(3,4dihydroxyphenyl)-3,4dihydro-2H-chromene-3,5,7-triol) oraz (-)-galusan epigallokatechiny (ang. EGCG; [(2R,3R)-5,7-dihydroxy-2(3,4,5-trihydroxyphenyl)chroman-3-yl] 3,4,5-trihydroxybenzoate) to związki o charakterze ksenobiotyków występujące w diecie człowieka. Ostatnie odkrycia zwracają uwagę w szczególności na proapoptotyczne właściwości związków z tej grupy. Obydwa wymienione związki chemiczne mogą modyfikować przebieg wewnątrzkomórkowych ścieżek sygnałowych w komórkach nowotworowych. Takie oddziaływanie może uruchamiać kaskadę aktywności prowadzącą do apoptozy, programowanej śmierci komórki neoplastycznej. Apoptoza jest jednym z mechanizmów, które wykorzystuje się w nowoczesnych terapiach przeciwnowotworowych. Apoptozę charakteryzuje szereg zmian w przebiegu procesów biochemicznych i morfologii komórki. Komórki nowotworowe mogą być eliminowane również na drodze nekrozy, jednakże ten typ śmierci komórkowej często prowadzi do lokalnego stanu zapalnego, co jest zjawiskiem niekorzystnym dla organizmu. Drugorzędowe metabolity roślinne, takie jak (+)-katechina i (-)-galusan epigallokatechiny, mogą wykazywać zdolność do wywoływania śmierci apoptotycznej komórek nowotworowych i potencjał ten może być wykorzystywany w nowoczesnych przeciwnowotworowych terapiach kombinowanych lub do wspierania istniejącego leczenia.
Źródło:
Proceedings of ECOpole; 2018, 12, 2; 335-343
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Leśnictwo w sektorowym rozwoju gospodarki w Polsce
Forestry in sectoral economic development in Poland
Autorzy:
Szramka, H.
Starosta-Grala, M.
Adamowicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/989586.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Leśne
Tematy:
lesnictwo
ekonomia
rozwoj gospodarki
rozwoj sektorowy
sectoral development
economy
state forests
poland
Opis:
The theory of sectoral economic development is evolving, as new forms of work organization and new economic sectors are created. Lack of clear definition of the economic sector makes it difficult to determine the impact of economic sectors on the development of the Polish forestry precisely. Forestry activities focus in three main sectors of the economy: agriculture, industry and services. In addition, they focus in three institutional sectors: the non−financial corporate sector, the household sector and the sector of government and in two ownership sectors: public or private one and in many co−operative sectors such as: forestry−wood, raw materials or defensive. Considering the place and the role of forestry from the viewpoint of the three−sector theory, it should be noted that most of the administrative and economic activities of the State Forests belong to the primary sector (agriculture). The industrial/manufacturing sector includes additional production associated with the wood and other forest products processing. This sector in the Polish forestry is currently neglected, but it used to be important, especially in the 1920−1930s. The tertiary sector comprises of services provided by the forestry, transport, construction and installation, training and leisure activities and others. This sector is growing rapidly and should endeavor to the commercialization of educational, recreational or defensive services, which are not currently measured. Analyzing the place of forestry among institutional sectors, we should state that forestry has the most significant importance in the non−financial corporate sector as the State Forests and forestry service companies (employing more than nine people) belong to this sector. In the household sector, there are small forestry service companies employing up to nine people and natural persons obtaining income from logging of private forests and other wooded lands. Whereas, in the government sector, there are mainly communal cities and municipal forests and traders running forestry activities in state forests of other ministries. Considering the development of the Polish forestry from the viewpoint of ownership sectors, it must be noted that since 2012 more people have been employed in the private sector and the gross added value of production has been higher in the private sector. The development of Polish, multifunctional forestry, in accordance with the principles of sustainable economic and social development, should be considered in the context of social needs and expectations, which change with the socio−economic development of the country.
Źródło:
Sylwan; 2016, 160, 05; 416-423
0039-7660
Pojawia się w:
Sylwan
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Eksport i import surowca drzewnego w wybranych krajach Unii Europejskiej
Export and import of timber in selected member states of the European Union
Autorzy:
Adamowicz, K.
Szramka, H.
Starosta-Grala, M.
Szczypa, P.
Powiązania:
https://bibliotekanauki.pl/articles/972947.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Leśne
Tematy:
drewno
surowce drzewne
import
eksport
kraje europejskie
Unia Europejska
leśnictwo
ekonomika leśnictwa
export
average rate of change
roundwood
Opis:
The aim of this work was to assess the rate of the changes in roundwood export and import in selected countries of the European Union during the period of 2003−2012. The data published in the FAO statistical yearbooks and concerning exported and imported timber amounts and values in the majority of the EU member states was analyzed. Based on the study, it can be concluded that international trade of wood is increasingly important in the development of the timber sector in different European countries. Import and export of raw timber changed both in terms of volume and value. In the years 2003−2012, the largest volume of timber export was recorded in Germany (55 mio m3). Compared to other countries, the extensive export of raw timber was also found in France (52 mio m3) and Latvia (44 mio m3). The greatest value of the exported roundwood in the analyzed decade was found in Germany (4,922 mio US$), France (3,482 mio US$) and the Czech Republic (2,690 mio US$). In the analyzed period, the largest importers of the roundwood material included Finland (106 mio m3), Austria (85 mio m3) and Sweden (76 mio m3). The highest value of imports of roundwood was recorded in Austria (7,224 mio US$). List of the countries characterized by high financial value of imported raw timber included Finland (6,771 mio US$) and Sweden (5,170 mio US$). Many countries (e.g. Luxembourg, Sweden, Ireland), that recorded a negative rate of volume change in raw timber export also, experienced an increase in the value of the change. In countries, which experienced the highest growth rate of raw timber import (i.e. Romania, Slovakia, Lithuania), one can see beneficial processes to support the development of the enterprises engaged in the processing of roundwood.
Źródło:
Sylwan; 2016, 160, 03; 179-186
0039-7660
Pojawia się w:
Sylwan
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ zmian cen żywca wieprzowego i wołowego na ceny tusz zwierząt łownych w latach 2005-2016
Impact of pork and beef price changes on wild game carcass prices in years 2005-2016
Autorzy:
Górnowicz, A.
Starosta-Grala, M.
Ankudo-Jankowska, A.
Adamowicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/979639.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Leśne
Tematy:
gospodarka lowiecka
dziczyzna
rynek dziczyzny
ceny
tusze jelenie
tusze dzikow
tusze sarnie
korelacje cen
zywiec wieprzowy
zywiec wolowy
zmiany cen
hunting economy
game
meat
boar
deer
roe−deer
correlation
Opis:
Because of the ever−changing nature of the environment, the limited availability of natural resources, and the increased number of people in the world, modifications in food production can be very important. In order to prevent irreversible damage occurring in the natural environment, food sources that are an alternative to pig meat, beef and poultry from industrial production are being sought. An alternative may be the meat of slow−moving animals. The studies show the impact of livestock (such as pigs and cattle) price changes in comparison to wild game purchase prices. An average correlation was found (r=–0.536) between unit purchase prices of pig livestock and unit purchase prices of wild boar. Regarding the changes in the purchase prices of beef livestock and the purchase prices of the deer carcasses, a weak correlation was observed (r=0.219), while a lack of correlation (r=–0.012) was found between the change in the price of beef and roe−deer. On the basis of the conducted studies, it was stated that in the situation of predicting prices for carcasses of game animals in Poland, information on the apparently substitutive good of farm animals should not be included. The average or low level of correlation, or in case of roe−deer carcass – the lack of correlation between the prices of farmed animals and the prices of wild game, make it possible to conclude that the processes taking place on the analyzed markets in terms of price developments were separate and unrelated.
Źródło:
Sylwan; 2019, 163, 02; 168-176
0039-7660
Pojawia się w:
Sylwan
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of flame heating parameters on the hardness of hardened C45 steel
Autorzy:
Dargacz, M.
Starosta, R.
Powiązania:
https://bibliotekanauki.pl/articles/244877.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
hardening
flame heating
multiple regression
mathematical optimization
Taguchi method
hartowanie
ogrzewanie płomieniem
wielokrotna regresja
optymalizacja matematyczna
Metoda Taguchi
Opis:
In this article, the impact of selected parameters of heating using a gas torch on the hardness of hardened alloy steels C45 was presented. The staff of the ship's engine room sometimes uses flame hardening during casual repairs of the machines weared as a result of operational extortions. The purpose of emergency repairs is to restore the possibility of work of ship machinery and equipment for the duration of the vessel's journey. An acetylene-oxygen torch was used to heat the steel. As the analysed parameters of the technological process, the heating time and the distance between the nozzle and the workpiece were selected. The values of the mentioned parameters have been selected so that the temperature of hardened steel is in the range from 800 to 1250 oC. The following values of the adopted machining parameters were used: the heating time was 60, 85 and 110 seconds, while the distance of the torch nozzle was 10, 20 and 30 mm. After heating, the samples were cooled by immersing in water. The research was based on a randomized orthogonal experiment plan. The purpose of the quantitative assessment of the influence of heating parameters on the hardness of hardened C45 steel, done statistical analysis variance analysis, multiple regression and mathematical optimization by the Tagichi method. Conducted tests and statistical analysis showed a significant effect of selected parameters of flame heating on the hardness of hardened C45 steel. The greatest influence on the hardness of the steel is the distance between the nozzle and the workpiece. The highest value of hardness was obtained using the following parameters of flame hardening: nozzle distance 30 mm, heating time 60 seconds.
Źródło:
Journal of KONES; 2018, 25, 1; 41-47
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adam Bartecki (1920-2010) - szkic o życiu i twórczości
Adam Bartecki (1920-2010) - an essay on his life and work
Autorzy:
Cieślak-Golonka, M.
Starosta, J.
Powiązania:
https://bibliotekanauki.pl/articles/172023.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Chemiczne
Tematy:
związki chromu
spektroskopia
widma elektronowe
analiza komputerowa
biografia naukowa
Bartecki Adam
Źródło:
Wiadomości Chemiczne; 2011, 65, 7-8; 533-556
0043-5104
2300-0295
Pojawia się w:
Wiadomości Chemiczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
“CRAWL.PL” Measuring Statistical and Structural Properties of the Polish Web : Technical Report
Autorzy:
Castillo, C.
Starosta, B.
Sydow, M.
Powiązania:
https://bibliotekanauki.pl/articles/92889.pdf
Data publikacji:
2007
Wydawca:
Uniwersytet Przyrodniczo-Humanistyczny w Siedlcach
Tematy:
web crawling
web graph
Page rank
Polish Web
Opis:
This document summarizes the results of an experiment made in the Polish-Japanese Institute of Information Technology, Warsaw, Poland during autumn 2005 and winter 2006. The goal of the project was to collect and analyze large portion of Polish Web documents in order to characterize the structure and other properties of the „.pl” domain. Up to the knowledge of the authors, it was the first publicly reported research experiment of this kind over the Polish Web. The following sections include information about downloaded Web pages, Web sites, and their characteristics. We also present various statistics concerning hosts and domains, as well as the link structure. Among the results of the experiment are the first data sets representing graphs of the Polish Web which will be publicly available for other researchers.
Źródło:
Studia Informatica : systems and information technology; 2007, 1(8); 43-73
1731-2264
Pojawia się w:
Studia Informatica : systems and information technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of glucosinolates on the in vitro growth of fungi pathogenic to oilseed rape [Brassica napus L.]
Autorzy:
Waligora, D.
Remlein-Starosta, D.
Korbas, M.
Powiązania:
https://bibliotekanauki.pl/articles/66890.pdf
Data publikacji:
2002
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
oil seed
oilseed rape
glucosinolate
Brassica napus
plant protection
pathogenic fungi
fungi
growth
in vitro
Źródło:
Journal of Plant Protection Research; 2002, 42, 4
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of rape glucosinolates on the growth of two pathogenic fungi species: Fusarium roseum and Rhizoctonia solani
Autorzy:
Waligora, D
Korbas, M.
Remlein-Starosta, D.
Powiązania:
https://bibliotekanauki.pl/articles/65806.pdf
Data publikacji:
2001
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Rhizoctonia solani
oilseed rape
glucosinolate
sulphur-containing glycoside
plant protection
Fusarium roseum
pathogenic fungi
fungi
growth
Opis:
The influence of oilseed rape glucosinolates on the grown in vitro pathogenic fungi was studied. Two pathogenic to oilseed rape fungi species: Fusarium roseum and Rhizoctonia solani were taken into consideration. It was observed that glucosinolates added to the medium limited the growth of both tested fungi to some extent, especially when higher concentrations of glucosinolates was supplied.
Testowano wpływ glukozynolanów wyizolowanych z nasion rzepaku (Brassica napus L.) na wzrost - w warunkach in vitro - dwóch gatunków grzybów patogenicznych porażających tę roślinę: Fusarium roseum i Rhizoctonia solani. Prowadzono hodowle grzybów na pożywce agarowo-ziemniaczanej (AGZ), do której dodawano glukozynolany w stężeniach od 400 do 1000 ppm. Stwierdzono, że glukozynolany ograniczały w pewnym stopniu wzrost pola powierzchni grzybni obu gatunków grzybów - zwłaszcza w wyższych stężeniach. Efekt ten był silniejszy w przypadku grzyba Fusarium roseum.
Źródło:
Journal of Plant Protection Research; 2001, 41, 2
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studies on template-synthesized polypyrrole nanostructures
Autorzy:
Starosta, W.
Buczkowski, M.
Sartowska, B.
Wawszczak, D.
Powiązania:
https://bibliotekanauki.pl/articles/146221.pdf
Data publikacji:
2006
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
template synthesis
track-etched membranes
polypyrrole nanotubules
Opis:
The paper presents a short review of recent achievements in the rapidly growing field of the template synthesis of nanostructures together with their possible application. The results of our own work, concerning the polypyrrole nanotubules synthesis inside pores of track-etched membranes, have been presented as well. Finally, the kinetics of nanotubule growth process using the SEM method and permeability for air of the resulting structures has been also determined.
Źródło:
Nukleonika; 2006, 51,suppl.1; 35-39
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies