Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Song, B." wg kryterium: Autor


Wyświetlanie 1-12 z 12
Tytuł:
Investigations on the Anisotropic g Factors of the $Ni^{3+}$ Site in $La_2Ni_{0.5}Li_{0.5}O_4$
Autorzy:
Kuang, M.
Wu, S.
Zhang, Z.
Song, B.
Powiązania:
https://bibliotekanauki.pl/articles/1400149.pdf
Data publikacji:
2013-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
76.30.Fc
71.70.Ch
75.10.Dg
Opis:
The anisotropic g factors $g_{∥}$ and $g_{⊥}$ of $La_2Ni_{0.5}Li_{0.5}O_4$ are theoretically investigated using the perturbation formulae of the g factors for a low spin $(S=1//2) 3d^7$ ion in tetragonally elongated octahedra. The studied $Ni^{3+} (3d^7)$ center arises from the original $Ni^{2+}$ capturing one hole by $Li^{+}$ doping. The positive anisotropy $\Delta g (= g_{⊥}-g_{∥})$ can be ascribed to the lowest $\text{}^2 A_{1g}$ state due to the obvious (about 0.14 Å) tetragonal elongation of the oxygen octahedron around the $Ni^{3+}$ site via the Jahn-Teller effect, and the effective magnetic moment is also interpreted in a uniform way. The calculated results show good agreement with the experimental data, and the imperfection of the previous studies based on various adjusted tetragonal energy splittings without correlating to the local structure of the magnetic center is thus overcome in this work.
Źródło:
Acta Physica Polonica A; 2013, 123, 4; 734-736
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena wzrostu niezawodności w bezzałogowym statku latającym podczas kolejnych faz badania w locie
Reliability growth estimation for unmanned aerial vechicle during flight-testing phases
Autorzy:
Yu, Y.
Cui, W.
Song, B.
Wang, S.
Powiązania:
https://bibliotekanauki.pl/articles/301049.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
niezawodność
wzrost niezawodności
badanie wzrostu niezawodności
metoda bayesowska
reliability
reliability growth
reliability growth testing
Bayesian method
Opis:
Samoloty muszą być testowane w locie podczas procesu ich opracowywania i dla zapewnienia niezawodności powinny przejść, podczas faz badania w locie, proces wzrostu niezawodności obejmujący kolejne etapy: testowania, poszukiwania ukrytego uszkodzenia, udoskonalania i ponownego testowania. Jednakże z powodu złożonej budowy samolotów i wysokich kosztów badań w locie, badania wzrostu niezawodności z reguły przeprowadza się na małych próbkach. Trudno jest zatem ocenić wzrost niezawodności w kolejnych fazach badań w locie. W niniejszej pracy do estymacji wzrostu niezawodności zastosowano metodę bayesowską dla dwumianowego wzrostu niezawodności opartą na rozkładzie a priori Dirichleta oraz obliczono parametry rozkładu a posteriori wykorzystując metodę symulacji Markov-Chain Monte Carlo. Metodę zastosowano w kolejnych fazach badań w locie bezzałogowego statku latającego (Unmanned Aerial Vehicle), a użyty przykład pokazuje, iż metoda oparta na rozkładzie a priori Dirichleta może skrócić czas badań w locie. Parametry rozkładu a priori łatwo jest potwierdzić na podstawie uprzednio znanych informacji. Proponowana metoda nadaje się do oceny badań wzrostu niezawodności podczas kolejnych etapów badań w locie.
It is necessary for airplanes to be fl ight-tested during the development process, and they should pass the testing/failurefi nding/improvement/re-testing reliability growth process during the fl ight-testing phases to ensure its reliability. However, due to airplane complexity and the high costs of fl ight-testing, the reliability growth testing is usually done with small samples. It is thus diffi cult to estimate the reliability growth during the fl ight-testing phases. In this paper, Bayesian method for binomial reliability growth based on the Dirichlet prior distribution is applied to reliability growth estimation, and the parameters of the posterior distribution are calculated by using the simulation method of Markov-Chain Monte Carlo. The method is applied to the Unmanned Aerial Vehicle test fl ight phases, and the example shows that the method based on the Dirichlet prior distribution can save the fl ight-testing time. It is easy to confi rm the parameters of the prior distribution by using the prior information. The proposed method is suitable for reliability growth testing estimation during fl ight-testing stages.
Źródło:
Eksploatacja i Niezawodność; 2010, 2; 43-47
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kinetics of hydrophobic agglomeration of molybdenite fines in aqueous suspensions
Autorzy:
Yang, B.
Song, S.
Lopez-Valdivieso, A.
Powiązania:
https://bibliotekanauki.pl/articles/110890.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
agglomeration rate
molybdenite fines
hydrophobic agglomeration
Opis:
The kinetics of hydrophobic agglomeration of molybdenite fines in aqueous suspensions has been studied in this work. This study was performed on minus 5 μm molybdenite particles through turbid-ity measurements and imaging. The results have showed that stirring strength and kerosene addition greatly affected the agglomeration rate of molybdenite fines in aqueous suspensions. The higher was the stirring strength, the larger the agglomeration rate was. Kerosene addition enhanced not only the agglom-eration rate, but also the agglomerates structure. It was recommended to use radial impeller for the for-mation of hydrophobic agglomeration, because it produced a stronger shear field in impeller zone.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 1; 181-189
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of hollow glass microspheres on the properties of high silica glass fiber fabric/liquid silicone rubber composite sheet
Wpływ dodatku mikrosfer szklanych na właściwości kompozytów tkaniny z włókna kwarcowego z ciekłym kauczukiem silikonowym
Autorzy:
Chen, S.
Qin, Y.
Song, Y.
Wang, B.
Powiązania:
https://bibliotekanauki.pl/articles/946990.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
composite sheet
hollow glass microspheres
liquid silicone rubber
dynamic mechanical properties
thermal conductivity
arkusz kompozytowy
mikrosfery szklane
ciekły kauczuk silikonowy
właściwości dynamiczno-mechaniczne
przewodność cieplna
Opis:
In this study, high silica glass fiber fabric/liquid silicone rubber (HSGFF/LSR) composite sheet filled with hollow glass microspheres (HGM) was prepared. The effects of HGM content on the mechanical, thermal insulation and dynamic mechanical properties of the composite sheet were investigated. The results showed that the compatibility and interfacial properties between HGM and the matrix were improved after the HGM was treated with a silane coupling agent, KH550. Composite, in which the HGM content was 7 % by weight, shows the most advantageous mechanical, insulating and damping properties.
Na bazie tkaniny z włókien kwarcowych (HSGFF) nasyconej ciekłym kauczukiem silikonowym (LSR) otrzymywano kompozyty napełniane mikrosferami szklanymi (HGM). Badano wpływ dodatku mikrosfer na właściwości mechaniczne, izolacyjność cieplną i właściwości dynamiczno-mechaniczne kompozytowych arkuszy. Stwierdzono, że modyfikacja mikrosfer szklanych za pomocą silanowego czynnika sprzęgającego KH550 poprawiła kompatybilność i oddziaływania międzyfazowe cząsteczek HGM i nasyconej ciekłym kauczukiem tkaniny z włókien szklanych. Najkorzystniejsze właściwości mechaniczne, izolacyjne i tłumiące wykazywał kompozyt, w którym zawartość HGM wynosiła 7 % mas.
Źródło:
Polimery; 2018, 63, 3; 178-184
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural interpretation of the qingdong area in bohai bay basin from shipborne gravity data
Autorzy:
Zhang, C.
Chen, J.
Song, M.
Wang, J.
Yuan, B.
Powiązania:
https://bibliotekanauki.pl/articles/259187.pdf
Data publikacji:
2015
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
gravity anomaly
seismic profile
rise-in-sag
structure Unit
Qingdong depression
Opis:
The Qingdong area, located in Bohai bay basin, was suspected good exploration prospects. In order to study tectonic features and find out favourable petroleum prospects in the area, the gravity data at a scale of 1:50,000 were interpreted. This paper, through data processing and synthetic interpretation of the high-precision gravity data in the area, discusses characteristics of the gravity field and their geological implications, determines the fault system, analyses features of the main strata, divides structure units and predicts favourable petroleum zones. The results showed that the faults controlled the development of the Mesozoic and Cenozoic strata and the distribution of local structures in this area. The study revealed that the Qingtuozi uplift and the Kendong uplift in the north were formed in Mesozoic, and the Qingdong depression in the middle was the rift basin in Mesozoic and Cenozoic. Thicker strata in Mesozoic and Cenozoic developed in the Dongying depression and the Qingdong depression, so there is abundant hydrocarbon in these two depressions, and then the Guangligang rise-in-sag and the Qingdong rise-in-sag developed in the center in these two depressions are also favorable places for prospecting
Źródło:
Polish Maritime Research; 2015, S 1; 100-105
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on recovery of lead, zinc, iron from jarosite residues and simultaneous sulfur fixation by direct reduction
Autorzy:
Wang, Y.
Yang, H.
Zhang, W.
Song, R.
Jiang, B.
Powiązania:
https://bibliotekanauki.pl/articles/110933.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
jarosite
direct reduction
recovery
valuable metal
sulfur fixation
Opis:
Jarosite residues, which are generated in a zinc production plant by a hydrometallurgical process, contain a large amount of valuable metal components. In this study, a method was proposed for the recovery of lead, zinc and iron from the residues and simultaneous sulfur fixation through direct reduction followed by magnetic separation. The influences of the roasting temperature, roasting time and the concentration of SO2 gas in the direct reduction process were researched in detail. Results showed that the volatilization rates of lead, zinc and sulfur were 96.97%, 99.89% and 1.09%, respectively, and the iron metallization rate was 91.97% under optimal reduction conditions; roasting temperature 1523 K for 60 min. The magnetic concentrate with the iron content of 90.59% and recovery rate of 50.87% was obtained from the optimal reduction product by grinding and magnetic separation. The optimum fineness for separation 96.56% less than 37 μm accounted with magnetic field strength 24 kA/m. The theoretical analysis was carried out by thermodynamics, X-ray powder diffraction, gas analysis and scanning electron microscopy.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 517-526
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Detection of self-biting behavior of mink by loop-mediated isothermal amplification (LAMP) and sequence-characterized amplified regions (SCAR)
Autorzy:
Liu, Z.Y.
Song, S.S.
Huo, Z.S.
Song, X.C.
Cong, B.
Yang, F.H.
Powiązania:
https://bibliotekanauki.pl/articles/2087715.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mink
self-biting
loop-mediated isothermal amplification
sequence-characterized amplified regions
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 2; 371-376
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Regional features analysis of plugged holes of dense phase gas-solid separation fluidized bed
Autorzy:
Zhang, B.
Zhao, Y.
Luo, Z.
Song, S.
Duan, C.
Dong, L.
Powiązania:
https://bibliotekanauki.pl/articles/109699.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gas-solid fluidized bed for separation
pressure fluctuation
plugged holes regions
features analysis
plugged holes sensitivity
Opis:
In contrast to traditional coal separation, dry separation does not require water and does not cause water pollution. Dense phase gas–solid fluidized beds are used for dry separation. The plugged holes in the air distributor should be tested to ensure the stability of these beds for particle separation. The pressure fluctuation is sensitive to these plugged holes. This sensitivity can be tested and diagnosed by determining the standard deviation of the pressure fluctuation. In areas with partial blockage, that is the areas with weak fluidization, a decrease in the volume fraction of the particles and in the pressure differences in the transverse of the bed results in an increase of the standard deviation of the pressure fluctuation, thereby stimulating the lateral mixing of medium-sized particles. The standard deviation and the mixing intensity decrease axially. The value of sensitivity of the plugged holes in the air distributor decreases as the height of the bed increases. The features of air distributors affect the surrounding areas. The distribution law determining the influence of plugged holes on the beds is symmetrical. As the blockage of the fluidized bed distributor region increases, the mean square error of the pressure fluctuation in the related regions increases. The intensity of the effect is proportional to the distance to the plugged holes.
Źródło:
Physicochemical Problems of Mineral Processing; 2014, 50, 2; 667-679
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reduction of Thermal Conductivity Through Complex Microstructure by Dispersion of Carbon Nanofiber in p-Type Bi0.5Sb1.5Te3 Alloys
Autorzy:
Sharief, P.
Madavali, B.
Sohn, Y.
Han, J. H.
Song, G.
Hong, S. J.
Powiązania:
https://bibliotekanauki.pl/articles/2049341.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bismuth telluride
carbon nano fiber
grain size
Thermal conductivity
ZT
Opis:
The influence of nano dispersion on the thermoelectric properties of Bi2Te3 was actively investigating to wide-spread thermoelectric applications. Herein this report, we have systematically controlled the microstructure of Bi0.5Sb1.5Te3 (BST) alloys through the incorporation of carbon nanofiber (CNF), and studied their effect on thermoelectric properties, and mechanical properties. The BST/x-CNF (x-0, 0.05, 0.1, 0.2 wt.%) composites powder was fabricated using high energy ball milling, and subsequently consolidated the powder using spark plasma sintering. The identification of CNF in bulk composites was analyzed in Raman spectroscopy and corresponding CNF peaks were recognized. The BST matrix grain size was greatly reduced with CNF dispersion and consistently decreased along CNF percentage. The electrical conductivity was reduced and Seebeck coefficient varied in small-scale by embedding CNF. The thermal conductivity was progressively diminished, obtained lattice thermal conductivity was lowest compared to bare sample due to induced phonon scattering at interfaces of secondary phases as well as highly dense fine grain boundaries. The peak ZT of 0.95 achieved for 0.1 wt.% dispersed BST/CNF composites. The Vickers hardness value of 101.8 Hv was obtained for the BST/CNF composites.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 3; 803-808
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Demonstration of a new indicator for studying upwelling in the Northern South China Sea
Autorzy:
Lin, L.
Wang, Y.-S.
Sun, C.-C.
Li, N.
Wang, H.
Mitchell, B.G.
Wu, M.-L.
Song, H.
Wu, J.-F.
Powiązania:
https://bibliotekanauki.pl/articles/48889.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
China Sea
cluster analysis
multivariate statistical analysis
principal component analysis
remote sensing
satellite monitoring
sea surface temperature
silicate
spatial distribution
upwelling
Opis:
In order to demonstrate that silicate (SiO3-Si) can be used as an indicator to study upwelling in the northern South China Sea, hierarchical cluster analysis (CA) and principle component analysis (PCA) were applied to analyse the metrics of the data consisting of 14 physical-chemical-biological parameters at 32 stations. CA categorized the 32 stations into two groups (low and high nutrient groups). PCA was applied to identify five Principal Components (PCs) explaining 78.65% of the total variance of the original data. PCA found important factors that can describe nutrient sources in estuarine, upwelling, and non-upwelling areas. PC4, representing the upwelling source, is strongly correlated to SiO3-Si. The spatial distribution of silicate from the surface to 200 m depth clearly showed the upwelling regions, which is also supported by satellite observations of sea surface temperature.
Źródło:
Oceanologia; 2011, 53, 2
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Internal Friction of Li7La3Zr2O12 Based Lithium Ionic Conductors
Autorzy:
Wang, X. P.
Song, L.
Hu, J.
Xia, Y. P.
Xia, Y.
Gao, Y. X.
Zhang, L. C.
Magalas, L. B.
Fang, Q. F.
Powiązania:
https://bibliotekanauki.pl/articles/958222.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
lithium ionic conductor
Li7La3Zr2O12
internal friction
Opis:
The diffusion mechanisms of lithium ions in tetragonal phase as well as in Al and Nb stabilized cubic Li7La3Zr2O12 compounds were investigated by low-frequency internal friction technique. In the cubic Li7La3Zr2O12 phase, a remarkable relaxation-type internal friction peak PC with a peak height up to 0.12 was observed in the temperature range from 15°C to 60°C. In the tetragonal phase however, the height of the PT peak dropped to 0.01. The obvious difference of the relaxation strength between the cubic and tetragonal phases is due to the different distribution of lithium ions in lattice, ordered in the tetragonal phase and disordered in the cubic phase. Based on the crystalline structure of the cubic garnet-type Li7La3Zr2O12 compound, it is suggested that the high internal friction peak in the cubic phase may be attributed to two diffusion processes of lithium ions: 96h↔96h and 96h↔24d.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 1; 21-24
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diversity, distribution and threats of the Juglandaceae in Vietnam
Autorzy:
Van Sam, H.
Quang Tung, D.
Jasinska, A.K.
Rion, F.
Tuyen, P.T.
Ngoc, D.T.B.
Tam, D.T.
Bétrisey, S.
Song, Y.G.
Kozlowski, G.
Powiązania:
https://bibliotekanauki.pl/articles/2078269.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Tematy:
Conservation biology
relict trees
Rhoiptelea
Engelhardia
Alfaropsis
Opis:
Vietnam is one of the main centers of generic diversity for Juglandaceae worldwide. In this study, we present for the first time a province-wide distribution of all 3 subfamilies, 7 genera, and 11 Vietnamese species, and give an update on the habitats of all Vietnamese Juglandaceae species, their uses, and current threats. Juglandaceae are found throughout Vietnam. However, most species occur predominantly in the north- ern part of the country between 600 and 1200 m. Some taxa range is found extensively from sea level up to 2,500 meters above sea level. According to the IUCN Red List, Rhoiptelea chiliantha, Carya sinensis, and Pterocarya tonkinensis are threatened while Engelhardia spicata, E. serrata, Alfaropsis roxburghiana, Pterocarya stenoptera are classified as least concerned (Carya tonkinensis is threatened locally, and Engelhardia spicata var. colebrookiana and Platycarya strobilacea merit “threatened” designation in Vietnam’s Red Data Book. The most frequent threats are logging, land-use change, and habitat destruction due to artificial wood planta- tions or road construction. Until now, no conservation measures have been applied for any of the species in Vietnam, although some species occur in national parks. Our study gives an important update on the current diversity and distribution of Juglandaceae in Vietnam. We point out the need for a correct assessment of the threat status of various species on a national and international scale to protect the rarest and most endangered of them. Further research, the use of various forms of protection of individual taxa and/or their habitats, and drawing the attention of an international group of researchers to the urgent need to work together to protect biodiversity in Vietnam hot spots are necessary.
Źródło:
Dendrobiology; 2021, 86; 39-55
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-12 z 12

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies