Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Sliwinski, M." wg kryterium: Autor


Tytuł:
Future needs for ship emission abatement and technical measures
Przyszłe potrzeby ograniczania emisji ze statków i techniczne środki ich realizacji
Autorzy:
Antes, T.
Szudyga, M.
Śliwiński, Ł.
Jaworek, A.
Krupa, A.
Balachandran, W.
Di Natale, F.
Gregory, D.
Jackson, M.
Powiązania:
https://bibliotekanauki.pl/articles/374561.pdf
Data publikacji:
2013
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
diesel engine
exhaust gas
diesel particulate matter
electrostatic scrubber
emission control
silnik Diesla
gaz wylotowy
ograniczenie emisji
Opis:
The International Maritime Organization (IMO) has revised air pollution regulations in MARPOL Annex VI. In 2012 Emission Control Areas (ECA) will limit fuel sulphur content to 1% and from 2015 to 0.1%). NOx emissions based on ships engine speed are also reduced for new vessels (2012 & 2016). Facing this legislation, ship owners have the alternative either to operate ships with costly low-sulphur fuels, or to keep using HFO but together with a gas cleaning equipment at the ship stack in order to reduce the rejected amount of SO2 gas in the atmosphere. To achieve this requirement, research and development organizations came out with proposing a solution that uses a device for cleaning exhaust gas of marine diesel engines. The paper presents a short communication about the DEECON project, which aim is to create a novel on-board after-treatment unit more advanced than any currently available. Each sub-unit of the system will be optimized to remove a specific primary pollutant. In particular, the technology within the DEECON system is based on novel or improved abatement techniques for reducing SOx, NOx, Particulate Matter (PM), CO and Volatile Organic Compounds (VOC). Some of these technologies are completely new for the maritime sector and they will represent a breakthrough in the reduction of the atmospheric emissions of ships, moving forward the performance of exhaust gas cleaning systems and fostering and anticipating the adoption of future and tighter regulatory requirements. In addition, an after-treatment strategy enables the possible adoption of alternative fuels, which often have their own emissions characteristics.
Na właścicieli statków i przewoźników morskich spadł obowiązek redukcji zanieczyszczeń pochodzących z ich działalności. Aby spełnić rygorystyczne wytyczne: dyrektyw Wspólnoty europejskiej, międzynarodowej organizacji morskiej (aneks VI, konwencji) MARPOL oraz praw wewnętrznych innych państw należałoby, w obszarach kontroli emisji, używać jako paliwa oleju napędowego o zmniejszonej zawartości siarki. Obszar kontroli emisji jest to obszar obejmujący Morze Bałtyckie, Morze Północne wraz z jego podejściami pod Kanał La-Manche oraz obszar wokół USA. Ze względu na wysokie ceny paliwa niskosiarkowego, duże koszty ewentualnych zmian technicznych przejścia na paliwo o niższej zawartości siarki spowoduje kilkakrotne zwiększenie opłat i zmniejszy atrakcyjność transportu morskiego. Naprzeciw tym wymaganiom wyszły jednostki badawczo rozwojowe, proponując rozwiązania polegające na zastosowaniu nowych, bardziej skutecznych urządzeń do końcowego oczyszczania spalin z okrętowych silników diesla. Artykuł jest komunikatem projektu o akronimie DEECON, którego głównym celem jest opracowanie innowacyjnego pokładowego urządzenia do oczyszczania spalin z okrętowych silników diesla składającego się z różnych modułów. Urządzenie to będzie optymalizowane w celu usunięcia najważniejszych zanieczyszczeń tj. SOx, NOx, PM, Lotnych Związków Organicznych (VOC) oraz tlenku węgla (CO). Niektóre z tych technologii są całkowicie nowe w przemyśle morskim i stanowią przełom w redukcji emisji zanieczyszczeń do atmosfery. Ponadto, takie rozwiązanie jest uniwersalne, umożliwia zastosowanie alternatywnych paliw do zasilania silników okrętowych, które często mają własne cechy emisji.
Źródło:
Transport Problems; 2013, 8, 3; 101-107
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza bezpieczeństwa funkcjonalnego i ochrony informacji w rozproszonych systemach komputerowych pełniących funkcje sterowania i zabezpieczeń
Functional safety and security analysis in the distributed computer systems performing the control and protection functions
Autorzy:
Barnert, T.
Kosmowski, K.
Śliwiński, M.
Powiązania:
https://bibliotekanauki.pl/articles/153857.pdf
Data publikacji:
2007
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
bezpieczeństwo funkcjonalne
ochrona informacji
poziom uzasadnionego zaufania EAL
poziom nienaruszalności bezpieczeństwa (SIL)
functional safety
information security
safety integrity level (SIL)
evaluation assurance level (EAL)
Opis:
W niniejszym artykule przedstawiona została problematyka związana z analizą bezpieczeństwa funkcjonalnego rozproszonych systemów sterowania i automatyki zabezpieczeniowej z uwzględnieniem zagadnień ochrony informacji. Powinny być one rozpatrywane w sposób zintegrowany w zależności od rodzaju komunikacji stosowanej do transmisji danych. W tym celu zaproponowano podział analizowanych systemów na trzy kategorie. Zaproponowane podejście zilustrowano na przykładzie rozproszonego systemu monitoringu i sterowania, który może korzystać z różnych kanałów przesyłu informacji.
The aim of this paper is to present some issues of the functional safety analysis of the distributed control, monitoring and protection systems including information security aspects. These aspects should be considered in an integrated way depending on the types of communication channels used. The classification of analyzed systems into three categories is proposed. The conventional functional safety assessment based on IEC 61508 and integrated with some information security aspects, based on ISO/IEC 15408, are presented. Proposed approach is illustrated by an example of distributed, monitoring, control and protection system using different communication channels.
Źródło:
Pomiary Automatyka Kontrola; 2007, R. 53, nr 4, 4; 130-134
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Framework for RIDM within functional safety management process
Autorzy:
Barnert, T.
Kosmowski, K.
Śliwiński, M.
Powiązania:
https://bibliotekanauki.pl/articles/2069134.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Morski w Gdyni. Polskie Towarzystwo Bezpieczeństwa i Niezawodności
Tematy:
functional safety
functional safety management
FSM
safety integrity level
SIL
risk informed decision making
RIDM
safety
security
uncertainty
Opis:
The functional safety management in life cycle is a complex process starting with identifying hazards and defining safety-related functions (SRFs) with regard to the results of risk assessment oriented at determining the safety integrity level of consecutive functions. Another element of such process is a verification of required SIL for considered architectures of safety-related system that implements given safety function. Due to complexity of the problem, to overcome difficulties in safety-related decision making often under considerable uncertainties, usually without taking into account security aspects, we propose to apply the RIDM methodology oriented on functional safety management of programmable control and protection systems in life cycle taking into some more important risk-related factors identified.
Źródło:
Journal of Polish Safety and Reliability Association; 2012, 3, 2; 217--226
2084-5316
Pojawia się w:
Journal of Polish Safety and Reliability Association
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Knowledge-based functional safety management using ProSIL software
Autorzy:
Barnert, T.
Kosmowski, K.
Śliwiński, M.
Powiązania:
https://bibliotekanauki.pl/articles/2069169.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Morski w Gdyni. Polskie Towarzystwo Bezpieczeństwa i Niezawodności
Tematy:
hazardous plants
functional safety management
control system
protection systems
safety integrity level (SIL)
Opis:
In the article the ProSIL software for computer aided functional safety management is presented. The software consists of three modules for the determination of the required SIL level (ProSILen) and verification of the SIL level (ProSILver). In the ProSIL the calibrated knowledge-based risk graph method for determining the required safety integrity level (SIL) of the safety functions identified in hazard analysis is implemented. The SILs are then verified for safety-related control and protection systems implementing relevant functions with regard to random failures and potential systematic failures. The assessment methods are compatible with international standards IEC 61508 and IEC 61511. Some current challenges and methodological issues concerning knowledge-based functional safety management in life cycle are also discussed.
Źródło:
Journal of Polish Safety and Reliability Association; 2013, 4, 2; 139--146
2084-5316
Pojawia się w:
Journal of Polish Safety and Reliability Association
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Program komputerowy ProSIL do wspomagania zarządzaniem bezpieczeństwa funkcjonalnego
ProSIL software for computer aided functional safety management
Autorzy:
Barnert, T.
Kacprzak, P.
Kosmowski, K.
Kozyra, M.
Porzeziński, M.
Śliwiński, M.
Zawalich, J.
Powiązania:
https://bibliotekanauki.pl/articles/2069719.pdf
Data publikacji:
2011
Wydawca:
Uniwersytet Morski w Gdyni. Polskie Towarzystwo Bezpieczeństwa i Niezawodności
Tematy:
bezpieczeństwo funkcjonalne
zarządzanie wspomagane komputerowo
funkcje bezpieczeństwa
nienaruszalność bezpieczeństwa
functional safety
computer aided management
safety-related functions
safety integrity
Opis:
In this article a prototype ProSIL software system for computer-aided functional safety management is discribed. The software consists of three modules for: determination of the required SIL level (ProSILen), veryfication of the SIL level (ProSILver), and layer of protection analysis (ProSIL/LOPA). In ProSIL the methods concerning functional safety analysis in the process of the design and operation of Safety Instrumented Systems (SIS) are implemented according to PN-EN 61508 and PN-EN 61511 standards, and some new methods, e.g. the calibrated risk graph method for determining required safety integrity level (SIL) based on the risk assessment. Moreover, methods of veryfying the SIL level of SIS. The Layer of Protection Analysis (LOPA) method with regard to Human Reliability Analysis (HRA) are also included in the software.
Źródło:
Journal of Polish Safety and Reliability Association; 2011, 2, 3; 87--96
2084-5316
Pojawia się w:
Journal of Polish Safety and Reliability Association
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Security aspects in functional safety analysis
Autorzy:
Barnert, T.
Kosmowski, K. T.
Piesik, E.
Śliwiński, M.
Powiązania:
https://bibliotekanauki.pl/articles/2069339.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Morski w Gdyni. Polskie Towarzystwo Bezpieczeństwa i Niezawodności
Tematy:
functional safety
security
safety integrity level
SIL
evaluation assurance level
EAL
security assurance level
SAL
risk assessment
risk graphs
programmable control
protection systems
Opis:
A security level of distributed control and protection system may have a significant impact on the results of functional safety analysis. However, the issue of integrating the safety and security aspects is difficult and usually is neglected during the functional safety analysis. This article presents a method of functional safety analysis which takes into consideration a concept of integrating these two aspects. It is based on proposed classification of communication channels used in the computer system / network and the scope of such system distribution. The functional safety analysis is to be performed at every stage of system lifecycle, but one of the most important parts is defining required safety functions and determining the safety integrity level for them. The integration concept might be taken into account at this stage. The basis of a method proposed is the assumption that the security level is considered as a risk parameter in graphs of functional safety analyses.
Źródło:
Journal of Polish Safety and Reliability Association; 2014, 5, 1; 1--8
2084-5316
Pojawia się w:
Journal of Polish Safety and Reliability Association
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ poziomu ochrony informacji na wymagania nienaruszalności bezpieczeństwa
The impact of the information security level on the safety integrity requirements
Autorzy:
Barnert, T.
Piesik, E.
Śliwiński, M.
Powiązania:
https://bibliotekanauki.pl/articles/268544.pdf
Data publikacji:
2014
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
bezpieczeństwo funkcjonalne
SIL
ochrona informacji
functional safety
information security
Opis:
W referacie przedstawiono zagadnienia związane z etapem analizy i oceny ryzyka obiektu technicznego podwyższonego ryzyka. Opisano metody określania wymagań na nienaruszalność bezpieczeństwa SIL zidentyfikowanych funkcji bezpieczeństwa. Funkcje takie realizowane są przez systemy E/E/PE (BPCS i/lub SIS) i są częścią systemu bezpieczeństwa składającego się z wielu warstw zabezpieczeniowo-ochronnych. Zarówno w metodach jakościowych, jak i pół-ilościowych wyznaczenie wymaganego SIL opiera się na kilku podstawowych parametrach ryzyka. Są one związane z częstością wystąpienia zdarzenia awaryjnego oraz jego potencjalnymi konsekwencjami. W związku z tym, iż coraz częściej systemy techniczne budowane są w oparciu o architekturę rozproszoną, pojawiają się nowe zagrożenia, które do tej pory nie były uwzględnianie w analizach ryzyka. Mogą one mieć wpływ zarówno na zwiększenie częstości wystąpienia zdarzeń i scenariuszy awaryjnych, jak również mogą zwiększać prawdopodobieństwo niewypełnienia funkcji związanej z bezpieczeństwem na przywołanie. Oba te zagadnienia powinny być uwzględnione w procesie przypisania wymaganego poziomu nienaruszalności bezpieczeństwa do funkcji. Zaproponowano rozszerzenie stosowanych obecnie metod o aspekty związane z uwzględnieniem poziomu ochrony informacji systemu technicznego.
The paper presents the issues related to the risk assessment process of a technical object. It describes methods for determining the safety integrity requirements (SIL) for the identified safety functions. Such functions are performed by the E/E/PE (BPCS and/or SIS) system, and are part of the safety-related system included in the layers of protection concept. A required SIL determination using the methods based on qualitative and semi-quantitative analysis are related to the several basic parameters of risk. They are associated with the frequency of occurrence of a dangerous event and its potential consequences. Due to the fact that more and more technical systems are built based on a distributed architecture, there are some new threats that have not yet been taken into account in the risk analysis. They can affect both the increase in the incidence of events and risk scenarios, and can increase the probability of failure of safety-related functions for reference. Both of these issues should be taken into account in the assignment of the required safety integrity level for the safety-related functions. The paper proposes extension of the currently used methods of functional safety analyses. It can be done with inclusion of the level of information security assigned to the technical system.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2014, 40; 23-27
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wspomagane komputerowo określanie wymaganego poziomu nienaruszalności bezpieczeństwa z wykorzystaniem autorskiej aplikacji ProSIL
ProSIL software for computer aided safety integrity level selection
Autorzy:
Barnert, T.
Piesik, E.
Śliwiński, M.
Powiązania:
https://bibliotekanauki.pl/articles/266414.pdf
Data publikacji:
2013
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
bezpieczeństwo funkcjonalne
nienaruszalność bezpieczeństwa
SIL
grafy ryzyka
ProSIL
functional safety
safety integrity level (SIL)
risk graphs
Opis:
W referacie przedstawiony został autorski moduł oprogramowania ProSIL wspomagający zarządzanie bezpieczeństwem funkcjonalnym. W module ProSILen wykorzystuje się metody matrycy oraz grafów ryzyka. Referat nawiązuje w swej tematyce do zagadnień związanych z etapem określania specyfikacji wymagań bezpieczeństwa dla zidentyfikowanych funkcji bezpieczeństwa realizowanych przez systemy E/E/PE. Składa się ona z dwóch podstawowych grup wymagań: funkcjonalnych (zadania funkcji bezpieczeństwa) oraz na nienaruszalność bezpieczeństwa. Wymagania te dotyczą bezpośrednio określenia wymaganego poziomu nienaruszalności bezpieczeństwa SIL i ma bardzo ważne znaczenie w późniejszych etapach analizy systemów sterowania i zabezpieczeń w cyklu ich życia.
In this article a module for SIL deteremination in ProSIL software is discribed.This module consists of risk matrix and risk graphs methods. In ProSIL the methods concerning functional safety analysis in the process of the design and operation of E/E/PE systems are implemented according to PN-EN 61508 and PN-EN 61511 standards. It is aimed mainly at safety requirements determining which is divided into two groups functional (what is the main scope of safety related function) and integrity requirements (how much risk reduction should be related with this function). The second requirement is very important because it is connected with required safety integrity level (SIL) which will be used in next stages of analysis.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2013, 36; 27-30
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of Signaling System Performance on QoE in Next Generation Networks
Autorzy:
Batalla, J. M.
Śliwiński, J.
Tarasiuk, H.
Burakowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/308179.pdf
Data publikacji:
2009
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
call setup delay
class of service
heterogeneous networks
next generation networks
quality of experience
quality of service
signaling system
Opis:
The first experience of quality by multimedia applications' users takes place during the setup phase of a new connection. If the setup phase is not accepted or "slowly accepted", the confidence of the user decreases. The user becomes more sensitive when he/she pays the connections with assured quality of service (QoS). In this case, the process of call request should be also accomplished with QoS guarantees. This paper presents the signaling sub-system implemented within the EuQoS system. The EuQoS signaling process follows main assumptions of next generation networks (NGN) architecture and performs tasks related with codec agreement between multimedia end users, admission control and resource reservation functions. In this paper, we present analytical, simulation and experimental results showing the impact of signaling system performance on quality of experience (QoE) for the potential users of multi-layer EuQoS system. In particular, the presented approach aims at ensuring user QoE of the connection setup phase by ensuring QoS for transferring signaling messages by the network.
Źródło:
Journal of Telecommunications and Information Technology; 2009, 4; 124-137
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Why is IPv6 Deployment Important for the Internet Evolution?
Autorzy:
Batalla, J. M.
Binczewski, A.
Burakowski, W.
Chudzik, K.
Gajda, B.
Gajewski, M.
Grzech, A.
Krawiec, P.
Kwiatkowski, J.
Mrugalski, T.
Nowicki, K.
Procyk, W.
Sienkiewicz, K.
Szuman, R.
Śliwiński, J.
Światowiak, J.
Wiśniewski, P.
Woźniak, J.
Powiązania:
https://bibliotekanauki.pl/articles/309546.pdf
Data publikacji:
2011
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
Internet evolution
IPv6
migration
mobility
Next Generation Internet
research
Opis:
Replacing the IPv4 protocol with IPv6 on the Internet is currently one of the aims of the European Union policy. The main reason for this replacement is the effeteness of the addresses pool in the IPv4 protocol, which can cause serious complications in the evolution of the Internet and its adaptation in new areas, e.g., in next generation mobile telephony or the so called Internet of Things. Simultaneously, the addressing capabilities of the IPv6 protocol are practically unlimited and its new functionalities increase the attractiveness of its usage. The article discusses the problems connected with the IPv6 deployment on the Internet. Especially, the rules for realization of the IPv6 deployment and rules for cooperation of IPv4 with IPv6 (including cooperation tests) in network infrastructure and in applications are presented. Moreover, the European projects' results and the activity's directions of the national project Future Internet Engineering are discussed.
Źródło:
Journal of Telecommunications and Information Technology; 2011, 2; 5-15
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design and implementing possibilities of composite pontoon bridge
Możliwości projektowe i wykonawcze kompozytowego mostu pontonowego
Autorzy:
Błażejewski, W.
Filipiak, A.
Barcikowski, M.
Łagoda, K.
Stabla, P.
Lubecki, M.
Stosiak, M.
Śliwiński, C.
Kamyk, Z.
Powiązania:
https://bibliotekanauki.pl/articles/945899.pdf
Data publikacji:
2018
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
pontoon bridge
composite material
prototype
most pontonowy
materiał kompozytowy
prototyp
Opis:
This work focuses on the analysis of actions conducted by the Military Institute of Engineer Technology and Wroclaw University of Science and Technology regarding the production and testing (on proving ground) of composite pontoon bridge. The starting point for this work was the experience gained from the project named „Light, resistant to environmental hazards, aluminum-composite hybrid pontoon used in constructing floating bridges of MLC 70/110 class”. Each one of the three V-shaped outriggers was designed using different technology. The middle part was constructed mostly of aluminum by company PREMO, but the smaller outrigger and all parts of the bow were made at Wroclaw University of Science and Technology from composite material reinforced with glass, aramid and carbon fibers. The inside was filled with multiple types of foam. During successful tests on proving grounds, conducted by Military Institute of Engineer Technology, elements were connected with PP-64 pontoons. It was proven that Wroclaw scientific society is capable of designing and manufacturing of a prototype pontoon bridge park.
W ramach projektu rozwojowego nr 03003906 zespoły Wojskowego Instytutu Techniki Inżynieryjnej i Politechniki Wrocławskiej zaprojektowały i wykonały pierwszy w świecie, całkowicie kompozytowy ponton przeznaczony do budowy mostów pływających. Kompletny prototypowy zespół pontonowy składa się z trzech członów zespolonych w układzie „V” – szerokiego członu centralnego i dwóch dwukrotnie węższych członów bocznych. Człony boczne do transportu składają się zawiasowo na wierzch członu centralnego. Każdy z trzech członów wykonano według różnej technologii. Jeden z nich – całkowicie kompozytowy – wykonano, wykorzystując włókna szklane, węglowe, aramidowe oraz wiele różnego typu pianek. Ponton jest lekki, niezatapialny, o podwyższonej odporności na uszkodzenia mechaniczne, w tym odłamki i przestrzelenie, a także na ogień. W ostatnim etapie prac ponton włączono w przeprawę i testowano przez najeżdżanie kolejno cięższymi pojazdami wojskowymi. Udowodniono słuszność koncepcji wykorzystania materiałów kompozytowych do budowy pontonów.
Źródło:
Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika; 2018, z. 90 [298], 4; 411-420
0209-2689
2300-5211
Pojawia się w:
Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Matrix metalloproteinase 3 polymorphisms as a potential marker of enhanced susceptibility to lung cancer in chronic obstructive pulmonary disease subjects
Autorzy:
Brzoska, K.
Bartlomiejczyk, T.
Sochanowicz, B.
Cymerman, M.
Grudny, J.
Kolakowski, J.
Kapka-Skrzypczak, L.
Kruszewski, M.
Sliwinski, P.
Roszkowski-Sliz, K.
Powiązania:
https://bibliotekanauki.pl/articles/49715.pdf
Data publikacji:
2014
Wydawca:
Instytut Medycyny Wsi
Źródło:
Annals of Agricultural and Environmental Medicine; 2014, 21, 3
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of SWAT model to small agricultural catchment in Poland
Aplikacja modelu SWAT na terenie małej zlewni rolniczej w Polsce
Autorzy:
Brzozowski, J.
Miatkowski, Z.
Śliwiński, D.
Smarzyńska, K.
Śmietanka, M.
Powiązania:
https://bibliotekanauki.pl/articles/293191.pdf
Data publikacji:
2011
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
azotany
rolnictwo
strefy buforowe
SWAT
zanieczyszczenia rozproszone
agriculture
nitrate
diffuse pollution
buffer strips
Opis:
Poland is obliged, like the other EU countries, to implement the Water Framework Directive - WFD (2000/60/WE) by the end of 2015. The main objective of WFD is to provide normative quality of all water resources. To reach this goal reduction of water polluter emission to the environment is needed. Our project focuses on pollution from agricultural sources which share in global pollution is high and growing still. As a pilot area, where the WFD is going to be implemented, small agricultural Zgłowiączka catchment was chosen. The state monitoring of surface water quality for the catchment is conducted in three points along the Zgłowiaczka River. In each of these three points, nitrates concentration periodically significantly exceeds the allowable value of 50 mg NO3·dm-3. The highest average monthly values of nitrates concentration in years 1990-2007 occur in February, March and April, which indicates on agriculture as a source of pollution. The Zgłowiaczka catchment is an area where reduction of nitrogen run-off from agricultural lands to water resources is especially needed. The main topic of the research carried out in the Polish-Norwegian project is to propose different means for reduction of migration of nitrate to surface water based on modeling approach. In the paper a conception of creating buffer zones using SWAT model is presented. We considered fitting the buffer zone width, depending on the flow rate of water flowing from the fields to the stream. Using SWAT model interface a map of potential flow under the conditions of the intensive precipitation was generated. The next step was distribution over the whole Zgłowiączka catchment, places with high density of the temporal streams network. It was done using GRASS program. The map of stream "density" was done by assigning the raster number which is the sum of raster in the neighbourhood (radius of neighbourhood smaller or equal 25 raster). The choice of the most endangered subbasins was done on base of visual evaluation of the surface flow density map. It is visible in the results that filter strips on endangered areas are far more effective and therefore more required. If the width of the vegetated buffer strips is not sufficient, it will not attain the desired effectiveness. Conversely, if the width is too great, it will cause agricultural land waste, preventing farmers' interest in cooperating with environmental preservation efforts. For the above reasons, it is important to set a reasonable width range. According to the results we are suggesting wider buffer zones in endangered subbasins and narrow in other subbasins.
Polska, podobnie jak pozostałe kraje członkowskie Unii Europejskiej, jest zobowiązana do wdrożenia Ramowej Dyrektywy Wodnej - RDW (2000/60/WE) do końca 2015 r. Głównym celem RDW jest osiągnięcie dobrego stanu ekologicznego wszystkich wód. Niezbędne jest więc ograniczenie emisji zanieczyszczeń zarówno do wód powierzchniowych jak i gruntowych. W polsko-norweskim projekcie pt. "Pilotażowe wdrożenie Ramowej Dyrektywy Wodnej i stworzenie narzędzia do zarządzania zlewnią" skupiono się na zanieczyszczeniach pochodzących ze źródeł rolniczych, których udział w ogólnym ładunku zanieczyszczeń jest bardzo znaczący i stale rośnie. W ramach projektu do wdrożenia RDW wybrano typowo rolniczą zlewnię górnej Zgłowiączki, zlokalizowaną na obszarze Kujaw. Na terenie zlewni od 1990 r. prowadzony jest państwowy monitoring jakości wód powierzchniowych przy ujściu cieku do Jeziora Głuszyńskiego, a od 2000 r. w dwóch monitoring uzupełniono o dwa dodatkowe punkty pomiarowo-kontrolne na długości cieku. W każdym z tych punktów stężenie azotanów okresowo kilkakrotnie przekraczało dopuszczalną wartość 50 mg·dm-3. Największe miesięczne wartości stężenia w latach 1990-2007 notowano w lutym, marcu i kwietniu, co wskazuje na pochodzenie zanieczyszczeń z rozproszonych źródeł rolniczych. W związku z tym obszar zlewni górnej Zgłowiączki to teren, na którym ograniczenie rozpraszania azotanów z rolnictwa do środowiska jest szczególnie potrzebne. Głównym celem projektu jest zaproponowanie działań prowadzących do ograniczenia rozpraszania azotanów do wód i przeanalizowanie ich skuteczności z wykorzystaniem modelowania. Do tego celu zastosowano hydrologiczny model SWAT, stworzony w celu przewidywania wpływu użytkowania terenu zlewni na jakość wód w długim czasie. W artykule przedstawiono koncepcję wykorzystania modelu SWAT do optymalnego określenia rozmieszczenia i szerokości stref buforowych na obszarze zlewni jako jednej z metod, prowadzących do ograniczenia procesu rozpraszania azotanów do wód.
Źródło:
Journal of Water and Land Development; 2011, 15; 157-166
1429-7426
2083-4535
Pojawia się w:
Journal of Water and Land Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Path Diversity Protection in Two-Layer Networks
Autorzy:
Dzida, M.
Śliwiński, T.
Zagożdżon, M.
Ogryczak, W.
Pióro, M.
Powiązania:
https://bibliotekanauki.pl/articles/308914.pdf
Data publikacji:
2009
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
link dimensioning
path diversity
resilient routing
two-layer network optimization
Opis:
The paper addresses an optimization problem related to dimensioning links in a resilient two-layer network. A particular version of the problem which assumes that links of the upper layer are supported by unique paths in the lower layer is considered. Two mixed-integer programming formulations of this problem are presented and discussed. Direct resolving of these formulations requirespre-selection of "good" candidate paths in the upper layer of the network. Thus, the paper presents an alternative approach which is based on decomposing the resolution process into two phases, resolved iteratively. The first phase subproblem is related to designing lower layer path flows that provide the capacities for the logical links of the upper layer. The second phase is related to designing the flow patterns in the upper layer with protection assured through diversity of paths. In this phase we take into account the failures of the logical links that result from the failures of the lower layer links (so called shared risk link groups).
Źródło:
Journal of Telecommunications and Information Technology; 2009, 3; 14-19
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Filmy i powłoki ochronne do serów
Protective films and coating to cheeses
Autorzy:
Galus, S.
Sliwinski, M.
Powiązania:
https://bibliotekanauki.pl/articles/121.pdf
Data publikacji:
2014
Wydawca:
Instytut Innowacji Przemysłu Mleczarskiego
Tematy:
sery
powloki jadalne
powloki ochronne
powlekanie
zywnosc
filmy jadalne
Opis:
Ochrona powierzchni surowców i żywności stwarza możliwości znacznego wydłużenia jej przydatności do spożycia. W technologii mleczarstwa powlekanie serów warstwą parafiny stosowano od dawna, głównie w celu ograniczenia nakładów na pielęgnację serów w czasie ich dojrzewania oraz zabezpieczania ich przed osuszką i pleśnieniem. Jednakże warstwy parafinowe bądź woskowe są niejadalne. Filmy i powłoki otrzymywane z polimerów naturalnych: białek, polisacharydów i/lub tłuszczów cechuje również jadalność. W niniejszej pracy przedstawiono charakterystykę biopolimerowych, ochronnych filmów i powłok jadalnych oraz możliwości przedłużenia trwałości serów.
The application of coating technology to food products provides opportunities to ex-tend their shelf life. Films and coatings are derived from natural polymers: proteins, polysaccharides and/or lipids, which are characterized as edible. The coating of cheeses with a thin layer of paraffin was used for a long time, mainly in order to pro-tect them from weight loss, growth of mould and mechanical damage. However, the paraffin or wax layer are non-edible. In this work, characteristics of the biopolymer, protective edible films and coating and their application to cheeses to extend their durability as an alternative to the generally applicable non-edible films were pre-sented.
Źródło:
Innowacyjne Mleczarstwo; 2014, 02, 1
2353-1282
Pojawia się w:
Innowacyjne Mleczarstwo
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies