Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Silva, A.C." wg kryterium: Autor


Tytuł:
Infinite ergodic index $ℤ^d$ -actions in infinite measure
Autorzy:
Muehlegger, E.
Raich, A.
Silva, C.
Touloumtzis, M.
Narasimhan, B.
Zhao, W.
Powiązania:
https://bibliotekanauki.pl/articles/1396029.pdf
Data publikacji:
1999
Wydawca:
Polska Akademia Nauk. Instytut Matematyczny PAN
Opis:
We construct infinite measure preserving and nonsingular rank one $ℤ^d$-actions. The first example is ergodic infinite measure preserving but with nonergodic, infinite conservative index, basis transformations; in this case we exhibit sets of increasing finite and infinite measure which are properly exhaustive and weakly wandering. The next examples are staircase rank one infinite measure preserving $ℤ^d$-actions; for these we show that the individual basis transformations have conservative ergodic Cartesian products of all orders, hence infinite ergodic index. We generalize this example to obtain a stronger condition called power weakly mixing. The last examples are nonsingular $ℤ^d$-actions for each Krieger ratio set type with individual basis transformations with similar properties.
Źródło:
Colloquium Mathematicum; 1999, 82, 2; 167-190
0010-1354
Pojawia się w:
Colloquium Mathematicum
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Combined Analyses of Ion Beam Synthesized Layers in Porous Silicon
Autorzy:
Ramos, A. R.
Pászti, F.
Horváth, Z. E.
Vázsonyi, É.
Conde, O.
da Silva, M. F.
da Silva, M. R.
Soares, J. C.
Powiązania:
https://bibliotekanauki.pl/articles/2028988.pdf
Data publikacji:
2001-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.10.-i
61.18.Bn
61.43.Gt
68.55.Ln
Opis:
High dose ion implantation was used to form polycrystalline silicide films on porous silicon with different native concentrations of light impurities (C and O). Porous silicon layers severalμm thick were implanted with 170 keV Cr$\text{}^{+}$ ions to fluences of 3×10$\text{}^{17}$ ions/cm$\text{}^{2}$ both at room temperature and 450ºC. Similar samples were implanted with 100 keV Co$\text{}^{+}$ ions to fluences of 2×10$\text{}^{17}$ ions/cm$\text{}^{2}$ at room temperature, 350ºC, and 450ºC. The formed silicide compounds were studied by Rutherford backscattering spectrometry, elastic recoil detection, glancing incidence X-ray diffraction, and four point-probe sheet resistance measurements. Selected Co implanted samples were analysed by cross-section transmission electron microscopy. Results show that the light impurities were partially expelled from the forming silicide layer. Combining cross-section transmission electron microscopy with ion beam methods it was possible to show that, in the implanted region, the porous structure collapses and densifies during implantation, but the underlying porous silicon remains intact. The layer structure, as well as the quality and type of the formed silicide, were found to depend on the original impurity level, implantation temperature, and annealing.
Źródło:
Acta Physica Polonica A; 2001, 100, 5; 773-780
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biomechanical modelling for whole body motion using natural coordinates
Biomechaniczne modelowanie trójwymiarowych ruchów człowieka w środowisku współrzędnych naturalnych
Autorzy:
Czaplicki, A.
Silva, M. T.
Ambrosio, J. C.
Powiązania:
https://bibliotekanauki.pl/articles/281844.pdf
Data publikacji:
2004
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
biomechanical model
multibody dynamics
inverse dynamics
internal forces
Opis:
The study of spatial human movements requires the development and use of a three-dimensional model. The model proposed here has 44 degrees-of-freedom and it is described using natural coordinates, which do not require an explicit definition of rotation coordinates. The biomechanical model consists of 16 anatomical segments composed of 33 rigid bodies. Joint actuators are introduced into equations of motion of the multibody model by means of kinematic driver constrains in order to reflect the effect of the muscle forces about each anatomical joint. After associating a Lagrange multiplier to each joint actuator, the torques that represent muscle forces become coupled with the biomechanical model through the Jacobian matrix of the underlying multibody system. The developed model is applied to identify net torques and reaction forces at the anatomical joints in application cases that include the take-off to aerial trajectories and standing backwards somersault.
W pracy zaprezentowano pełną metodologię do badania ruchów człowieka. Podstawowym elementem tej metodologii jest trójwymiarowy biomechaniczny model ciała ludzkiego. Położenia członów modelu opisano za pomocą współrzędnych naturalnych, co wyeliminowało konieczność użycia współrzędnych kątowych. Model składa się z 33 ciał sztywnych połączonych przegubami (stawami) i posiada 44 stopnie swobody. Wypadkowe momenty sterujące w poszczególnych stawach pochodzące od sił mięśniowych wprowadzono do dynamicznych równań ruchu modelu za pomocą stosownych więzów kinematycznych pomiędzy sąsiadującymi członami w danym stawie. Wartości tych momentów wyznaczono wykorzystując formalizm mnożników Lagrange'a. Model wykorzystano do identyfikacji wypadkowych momentów mięśniowych i reakcji wewnętrznych w głównych stawach kończyny dolnej człowieka podczas odbicia do skoku w dal oraz w trakcie wykonywania salta w tył z miejsca.
Źródło:
Journal of Theoretical and Applied Mechanics; 2004, 42, 4; 927-944
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
From palaeosols to carbonate mounds: facies and environments of the middle Frasnian platform in Belgium
Autorzy:
Silva da, A. C.
Boulvain, F.
Powiązania:
https://bibliotekanauki.pl/articles/2058840.pdf
Data publikacji:
2004
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
Belgium
middle Frasnian
carbonate platform
palaeogeography
facies
carbonate mounds
Opis:
This paper provides a synthetic sedimentological overview of themiddle Frasnian carbonate platform of Belgium and associated carbonate mounds. Carbonate mounds started usually in a relatively deep, quiet subphotic environment with a crinoid-coral-sponge assemblage, then reached the fair-weather wave base and the euphotic zone with an algal-microbial facies. The upper parts of themounds are characterised by lateral facies differentiation with the algal-microbial facies protecting a central sedimentation area with a dendroid stromatoporoids facies and fenestral limestone. The lateral facies reflect different kinds of input of reworked mound material in the proximal area, from transported fine-grained sediment to coarse-grained fossil debris. On the platform, environments range from the outer zone (crinoidal facies) to stromatoporoid-dominated biostromes and to the lagoonal area of the inner zones (subtidal facies with Amphipora floatstone, algal packstone, intertidal mudstone and laminated peloidal packstone and palaeosols). These facies are stacked in metre-scale shallowing-upward cycles. The larger scale sequential organisation corresponds to transgressions and regressions, whose cycles are responsible for differentiating a lower open-marine biostrome dominated unit from an upper lagoonal unit. The last regression- transgression cycle, responsible for the platform-scale development of lagoonal facies, can be correlated with an atoll-stage evolution of the carbonate mounds belonging to the Lion Member.
Źródło:
Geological Quarterly; 2004, 48, 3; 253--266
1641-7291
Pojawia się w:
Geological Quarterly
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sensorless Control of Surface Mounted Permanent Magnet Synchronous Motors Using Matrix Converters
Autorzy:
Saltiveri, D.
Arias, A.
Asher, G.
Sumner, M.
Wheeler, P.
Empringham, L.
Silva, C.
Powiązania:
https://bibliotekanauki.pl/articles/262580.pdf
Data publikacji:
2006
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie
Tematy:
sensorless control
permanent magnet synchronous motor
matrix converters
Opis:
This paper investigates the influence of the power converter on the performance of Surface Mounted Permanent Magnet Synchronous Motor drives, which employ High Frequency voltage injection to achieve low and zero speed control. Experimental results demonstrate the remarkable performance of the sensor less speed and position control employing the Matrix Converter and the contributions of the Space Modulation Profiling technique. The Matrix Converter has almost zero dead time, which means that behaves almost like an ideal power converter and achieves better results than the conventional Voltage Source Inverter. A comparison of the sensor less technique proposed using both converters is made.
Źródło:
Electrical Power Quality and Utilisation. Journal; 2006, 12, 1; 59-67
1896-4672
Pojawia się w:
Electrical Power Quality and Utilisation. Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development and production of radioactive sources used for cancer treatment in Brazil
Autorzy:
Rostelato, M. E. C. M.
Rela, P. R.
Zeituni, C. A.
Feher, A.
Manzoli, J. E.
Moura, J. A.
Moura, E. S.
Silva, C. P. G.
Powiązania:
https://bibliotekanauki.pl/articles/148305.pdf
Data publikacji:
2008
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
radioactive sources production
iodine-125 seeds
iridium-192 wires
brachytherapy
cancer treatment
Opis:
The number of cancer patients in Brazil is increasing and part of the patients are submitted to brachytherapy treatment using iridium-192 wire and iodine-125 radioactive seeds. The Nuclear Energy Research Institute established a programme to produce iridium-192 wire and iodine-125 radioactive seeds. With the purpose of settling a laboratory for iridium-192 sources production, a wire activation method was developed and a hot cell for the wire manipulation, quality assurance and packaging was built. The iodine-125 seeds consist of a welded titanium capsule containing iodine-125 adsorbed onto a silver rod. Concerning the setup of the local production, the following activities were carried out: superficial treatment of the silver rod, development of a process to absorb the iodine in the silver rod, welding methodology to seal the seeds, leakage and contamination test and source activity measurement.
Źródło:
Nukleonika; 2008, 53, suppl. 2; 99-103
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of an irradiation system for a small size continuous run multipurpose gamma irradiator
Autorzy:
Calvo, W. A. P.
Rela, P. R.
Napolitano, C. M.
Kodama, Y.
Omi, N. M.
da Costa, F.
de Andrade e Silva, L. G.
Powiązania:
https://bibliotekanauki.pl/articles/148041.pdf
Data publikacji:
2009
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
multipurpose irradiator
gamma irradiator
compact irradiator
cobalt-60 irradiator
gamma facility
Opis:
The Radiation Technology Center from IPEN-CNEN/SP, Brazil, developed a revolutionary design and national technology, a small-sized continuous run and multipurpose industrial gamma irradiator, to be used as a demonstration facility for manufacturers and contract service companies, which need economical and logistical in-house irradiation system alternatives. Also, to be useful for supporting the local scientific community on development of products and process using gamma radiation, assisting the traditional and potential users on process validation, training and qualification of operators and radioprotection officers. The developed technology for this facility consists of a continuous tote box transport system, comprising a single concrete vault, where the automated transport system of products inside and outside of the irradiator utilizes a rotating door, integrated with the shielding, avoiding the traditional maze configuration. Covering 76 m2 of floor area, the irradiator design is a product overlap sources and the maximum capacity of cobalt-60 wet sources is 37 PBq. The performed qualification program of this multipurpose irradiator was based on AAMI/ISO 11137 standard, which recommends the inclusion of the following elements: installation and process qualification. The initial load of the multipurpose irradiator was 3.4 PBq with 13 cobalt-60 sources model C-188, supplied by MDS Nordion – Canada. For irradiator dose optimization, the source distribution was done using the software Cadgamma developed by IPEN-CNEN/SP. The polymethylmetacrylate (PMMA) dosimeter system, certified by the International Dose Assurance Service (IDAS) of the International Atomic Energy Agency (IAEA) was used for irradiator dose mapping. The economic analysis, performance concerning with dose uniformity and cobalt-60 utilization efficiency were calculated and compared with other commercial gamma irradiators available on the market.
Źródło:
Nukleonika; 2009, 54, 2; 93-97
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Radiation processing of detergents and possible environmental benefits
Autorzy:
Borrely, S. I.
Romanelli, M. F.
Pereira, M. C. C.
da Silva, G. P.
Mesquita, L. C. A.
de Moraes, M. C. F.
Powiązania:
https://bibliotekanauki.pl/articles/148020.pdf
Data publikacji:
2009
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
EB irradiadion
anionic surfactants
effluent
Vibrio fischeri
Daphnia similis
Opis:
Detergents at waters inducing negative changes for biological degradability and water general quality. Some authors have evidenced a considerable amount of anionic surfactant and toxic effects into natural water and effluents related to detergents. The objective of the study was to apply electron irradiation for reducing toxicity, and for degradation of surfactants. To quantify surfactant LAS determination as MBAS (metylene blue active substances) was applied. The capacity of radiation to reduce surfactants was evidenced for real effluent and for water solution containing sodium dodecyl sulfate, linear alkylbenzene sulfonate (LAS), separately. An electron beam accelerator (EBA) 1.5 MeV was the radiation source. Anionic surfactant solutions as well as real effluents resulted in less toxic samples after irradiation. Toxicity was evaluated for Vibrio fischeri and Daphnia similis. An important decline of total anionic surfactant was observed after irradiation to doses: 6.0 kGy and 20 kGy (surfactant in water solutions and effluents, respectively). To conclude, EBA irradiations accounted for 88% to 96% less toxic surfactants solutions and effluents and 68% to 96% for MBAS compounds decomposition.
Źródło:
Nukleonika; 2009, 54, 2; 61-64
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
High speed machining of aluminium gear box without temperature stabilization
Szybka obróbka aluminiowych obudów skrzyń biegów bez stabilizacji temperaturowej
Autorzy:
Silva, A.
Mateus, C.
Węgrzyn, T.
Miros, M.
Powiązania:
https://bibliotekanauki.pl/articles/374817.pdf
Data publikacji:
2010
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
stop aluminium
stabilność wymiarowa
obróbka szybkościowa
aluminium alloy
dimensional stability
high speed machining
Opis:
At the present time both clutch and mechanism housings, which are the main components from automotive gear boxes, are made of special aluminium alloys. These alloys are extremely light when compared with steel, making them a perfect choice to mitigate the cars weight and machining costs. Nonetheless they possess a high thermal expansion coefficient, which can be considered a major disadvantage since it makes necessary to pay extraordinary attention to dimensional variations during the production cycle due to temperature deviations. High speed machining of precision components made of aluminium requests thus their temperature to become previously stable. This procedure is the only way to force dimensions to stay inside its tolerance intervals. The main purpose of the present work was to assess the possibility to avoid the use of special ovens to make the clutch housing temperature become stable prior to machining. The dimensional stabilization of 40 sample parts, pre-heated at three temperature levels, was accomplished through the use of this system. The achieved results were made possible by analysing the part's temperature at the machine's entrance, the machine's interior temperature, 35 measured dimensions and their tolerance intervals as well as the average temperature deviations of each of the five considered batches. By analysing the obtained results in detail it was possible to determine which dimensions show high sensitiveness to temperature (high correlation between dimension's variation and temperature). Among these dimensions we can point out the ones related with depth, since they display the highest deviations due to temperature. Being a work with practical application it was possible to confirm the benefit of using this methodology by achieving significant enhancements on production efficiency, energy savings and reduction on maintenance costs, through the application of small adjustments to the machining sequence and by adopting a systematic tuning of certain dimensions.
Obecnie zarówno sprzęgło, jak i mechanizm przekładniowy, które są głównymi komponentami skrzyń biegów, umieszczone są w obudowie wykonanej ze specjalnych stopów aluminium. Stopy te są znacznie lżejsze w porównaniu ze stalą, powoduje to że są one doskonałym wyborem, by zmniejszyć wagę samochodów oraz 58 A.P. Silva, C.S. Mateus,, T. Wegrzyn, M. Miros koszty produkcji. Niemniej jednak materiały te posiadają wysoki współczynnik rozszerzalności cieplnej, który może zostać uznany ich główna wadą. Powoduje to że koniecznym stało się zwracanie dużej uwagi na utrzymanie wariantów wymiarowych podczas obróbki charakteryzującej się zmianami temperatury. Wysoka szybkość obróbki precyzyjnych komponentów wykonanych z aluminium spowodowała konieczność wcześniejszego ich podgrzewania w celu uniknięcia zmian temperatury podczas obróbki. Takie zabieg jest jedynym sposobem, aby zachować odpowiednią tolerancję wymiarową. Głównym celem niniejszej pracy była ocena możliwości, uniknięcia użycia specjalnych pieców wstępnie podgrzewających elementy przed obróbką w celu zapewnienia stabilizacji termicznej podczas obróbki. W pracy przeanalizowano możliwość zastosowania specjalnych komór z natryskowym systemem chłodzenia olejowego. Analiza osiągniętych wyników była możliwa poprzez pomiar temperatur na wejściu do maszyny oraz w jej wnętrzu. Pomiary przeprowadzono dla 35 próbek, których wymiary oraz tolerancję mierzono. Szczegółowa analiza pozwoliła stwierdzić, które z wymiarów wykazują się dużą wrażliwością na zmiany temperatury (wysoka korelacja między odmianą wymiaru i temperaturą). Pomiędzy wytypowanymi wymiarami najwrażliwszymi okazały się wymiary związane z głębokością. Uzyskane wyniki pozwoliły potwierdzić korzyści z używania opracowanej metody. Metoda ta pozwala na znaczne oszczędności energii oraz zwiększenie efektywności produkcji.
Źródło:
Transport Problems; 2010, 5, 3; 57-66
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Spatial analysis of vegetal cover and sediment yield in Tapacura river catchment based on remote sensing and GIS
Analiza przestrzenna ilosci sedymentu oraz pokrywy roslinnej w zlewni rzeki Tapacura okreslona na podstawie zdalnych obserwacji oraz analizy GIS
Autorzy:
Silva, R M
Santos, C.A.G.
Gico Lima Montenegro, S.M.
Silva, L.P.
Powiązania:
https://bibliotekanauki.pl/articles/81843.pdf
Data publikacji:
2010
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
spatial analysis
vegetation cover
sediment yield
Tapacura River
catchment
remote sensing
GIS analysis
Opis:
Mapping and assessment of erosion risk is an important tool for planning of natural resources management, allowing researchers to propose modifi cation in land-use properly and implement more sustainable management strategies in the long-term. The Tapacurá river catchment, located in Pernambuco State, Northeastern Brazil, is one of the planning units for management of water resources of Recife Metropilitan Region (RMR), and it is divided into 12 sub-basins. The objective of this study is to evaluate the spatial variability of vegetal cover and sediment yield in this basin through remote sensing and GIS techniques. Maps of the erosivity (R), erodibility (K), topographic (LS), cover-management (C) and support practice (P) factors were derived from the digital elevation model (DEM), climate database, and soil and NDVI maps, taking into account information available in the literature. In order to validate the simulation process, Sediment Delivery Ratio (SDR) was estimated. The obtained NDVI map showed vegetation loss during the analyzed period, indicating a distinct contrast between loss and gains of vegetation index. The vegetation and sediment yield mapping showed to be a useful tool for environmental monitoring and management, which can provide satisfactory results when jointly used. The results suggest a mean SDR around 0.9 and estimate the sediment yield as 23.98 ton/ha/month.
Analiza przestrzenna ilości sedymentu oraz pokrywy roślinnej w zlewni rzeki Tapacura określona na podstawie zdalnych obserwacji oraz analizy GIS. Artykuł przedstawia sposób wykorzystania zebranych w terenie danych dotyczących pokrywy roślinnej oraz ilości sedymentu określonego za pomocą zdalnych obserwacji oraz analizy GIS w celu monitorowania środowiska i zarządzania zlewniami. W pracy wykorzystano metodę USLE-SDR, a także cyfrowy model terenu. Badania prowadzono w zlewni rzeki Tapacura w północno-wschodniej Brazylii. Wyniki sugerują przyjęcie wartości parametru SDR = 0,9, a oszacowana wielkość transportu rumowiska wynosi 23,98 t/ha/miesiąc.
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation; 2010, 42, 1; 5-16
0208-5771
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Involvement of carbohydrates and antioxidant enzymes in the oxidative balance during drought and recovery: the eucalyptus case
Autorzy:
Correia, B.
Silva, S.
Jesus, C.
Valledor, L.
Dias, M.
Costa, A.
Santos, C.
Pinto, G.
Powiązania:
https://bibliotekanauki.pl/articles/79853.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
conference
carbohydrate
antioxidative enzyme
oxidative balance
drought
recovery
cellular function
abiotic stress
reactive oxygen species
eucalyptus
Eucalyptus globulus
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2013, 94, 2
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Anthropometric indicators of obesity in policemen: A systematic review of observational studies
Autorzy:
Da Silva, Franciele C.
Hernandez, Salma S.
Gonçalves, Elizandra
Arancibia, Beatriz A.
Da Silva Castro, Thiago L.
Da Silva, Rudney
Powiązania:
https://bibliotekanauki.pl/articles/2178909.pdf
Data publikacji:
2014-12-01
Wydawca:
Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Tematy:
obesity
police
systematic review
observational study
Opis:
The aim of this paper was to summarize scientific literature on obesity in policemen through a systematic review of observational studies. For this purpose the following electronic databases were selected: Medline by Pubmed, CINAHL, and Scopus; and a manual search of the referenced studies concerning this topic was performed. There were no restrictions with respect to the year or language of the publication. Twenty-three studies were identified and 9 articles, considered as potentially relevant, were included. The labor time, shift and career progression promoted changes in body composition. Most of the policemen taking part in the studies included in this paper were overweight (BMI: 25.2–29.3), obese (body fat ≥ 25%), had increased waist (90.4–102 cm) and abdominal perimeters (18.9–90.5 cm), and had a higher risk of chronic disease, which is associated with depression and stress development. Interventional studies are needed for the purpose of proposing preventive and rehabilitation programs, which would result in providing physical and mental well-being, improvement of life quality and, especially, prevention of obesity related to police work.
Źródło:
International Journal of Occupational Medicine and Environmental Health; 2014, 27, 6; 891-901
1232-1087
1896-494X
Pojawia się w:
International Journal of Occupational Medicine and Environmental Health
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Railway industry roadmap in the state of Santa Catarina, Brazil
Roadmap para a indústria ferroviário do estado de Santa Catarina, Brasil
Autorzy:
Dias, A.
Da Silva, J. C.
Kagueiama, H. H.
Haddad, C. R.
Uriona, M. M.
Lezana, Á. G. R.
Juliatto, D. L.
Powiązania:
https://bibliotekanauki.pl/articles/374823.pdf
Data publikacji:
2015
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
technology
roadmapping
rail industry
technologia
mapa drogowa
przemysł kolejowy
branża kolejowa
Opis:
This article aims to identify the main requirements to strengthen the railroad industry in Santa Catarina by using technology roadmapping. The railway industry is composed of carriers, manufacturers, suppliers, operators, logistics, services and education. The survey aimed to provide guidelines for the Federation of the State of Santa Catarina Industry (FIESC) to develop its strategic plan for the next eight years. Based on the survey, the roadmap defined vision, mission, a list of key concepts, drivers and actions for the Federation to support the railway industry development, since this industrial sector is still economically unrepresented when compared to other sectors in Santa Catarina. The survey also pointed out there is a strong expansion program of the railway freight and railway transport for people in Brazil, both in government and private sectors.
Este artigo objetiva identificar os principais requisitos para fortalecer a indústria ferroviária em Santa Catarina (SC), por meio da aplicação do processo de technology roadmapping. A indústria ferroviária é composta por transportadores, fabricantes, fornecedores, operadores de logística, serviços e educação. A pesquisa objetivou fornecer orientações para a Federação das Indústrias de Santa Catarina (FIESC) com a finalidade de desenvolver um plano estratégico para os próximos oito anos. Baseando-se na pesquisa, definiram-se a visão, missão e uma lista de conceitos chaves, drivers e ações para que a FIESC apoiasse o desenvolvimento da indústria ferroviária, uma vez que esta é economicamente pouco representativa em comparação com outras indústrias no estado de SC. A pesquisa apontou que há forte expansão do transporte de cargas e pessoas no Brasil, tanto nos setores governamentais quanto nos setores privados.
Źródło:
Transport Problems; 2015, T. 10, z. spec.; 29-36
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the Phase Transitions in BNT-BT Lead-Free Ceramics Around Morphotropic Phase Boundary by Mechanical and Dielectric Spectroscopies
Autorzy:
Silva Jr, P. S.
Diaz, J. C. C. A.
Florêncio, O.
Venet, M.
M’Peko, J. C.
Powiązania:
https://bibliotekanauki.pl/articles/353072.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Lead-free piezoelectric ceramics
morphotropic phase boundary
phase transitions
mechanical spectroscopy
dielectric spectroscopy
Opis:
In this work, the syntheses and characterization by mechanical and dielectric spectroscopies of (1-x) Bi0.5Na0.5TiO3-xBaTiO3 (BNT-100xBT), with x = 0.05, 0.06 and 0.07, lead-free piezoelectric ceramics is reported. Ceramic samples of BNT-BT have been prepared by mixed-oxide method and then conventionally sintered. X-ray diffraction patterns of sintered samples, indicated for BNT-7BT the presence of tetragonal (P4mm) complex perovskite structure, whereas for BNT-5BT and BNT-6BT the samples exhibit a mixture of tetragonal (P4mm) and rhombohedral (R3c) crystalline phases, which reveal the presence of a morphotropic phase boundary (MPB) in the BNT-BT system. Measurements of internal friction, Q-1, and the storage modulus, E’, as a function of temperature at various frequencies were carried out in a Dynamic Mechanical Analyzer (DMA), in the temperature range from 0ºC to 600ºC. Dielectric profiles are recorded in the frequency range from 1kHz to 100kHz and the temperature range from room temperature to 475ºC. Mechanical loss spectra obtained for investigated compositions of BNT-BT samples showed different frequency-independent anomalies. Two main anomalies for BNT-5BT and BNT-6BT, observed around 100ºC and 430ºC were associated with the ferroelectric-antiferroelectric and antiferroelectricparaelectric phase transitions, respectively. The results obtained from mechanical loss measurements were supported by dielectric relaxation spectra. For BNT-7BT, outside the MPB, four different frequency-independent processes were observed.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 1; 17-20
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Relationship between performance, dry-land power and kinematics in master swimmers
Autorzy:
Espada, M. C.
Costa, M. J.
Costa, A. M.
Silva, A. J.
Barbosa, T. M.
Pereira, A. F.
Powiązania:
https://bibliotekanauki.pl/articles/307228.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
pływanie
kinematyka
energia
master swimmers
kinematic
dry-land power
performance
Opis:
The purpose of the study was to analyze the relationships between sprint swimming performance, dry-land power, and kinematics in master swimmers. Twenty-two male master swimmers were separated in two groups based on their chronological age: (i) 30–39 years and; (ii) 40–49 years. Maximum dry-land power was determined through counter movement jump and 3 kg medicine ball throwing (Hmax and Tmax, respectively). Kinematic determinants of performance were measured during a maximal bout of 15, 25 and 50 m front crawl (T15, T25, T50). Stroke frequency (SF), stroke length (SL) and stroke index (SI) were calculated as kinematical aspects of the stroke. In the 30-39 group, SI25 was correlated to T25 (r = –0.76, p < 0.01, η2 = 0.96), the same was observed between SI50 and T50 (r = –0.83, p < 0.01, η2 = 0.96). Only SI50 was significantly correlated to T50 (r = –0.86, p < 0.01, η2 = 0.97) in the 40–49 years age cohort. In dryland power variables, Hmax and Tmax were only correlated in the younger master swimmers group (r = –0.87, p < 0.01, η2 = 0.97). There were no significant differences (p < 0.05) between younger (30–39 years) and older (40–49 years) swimmers groups in dry-land tests (Hmax 28.5 ± 5.9 vs. 26.5 ± 3.9 cm and Tmax 4.2 ± 1.0 vs. 4.2 ± 1.1 m). Our results suggest that swimming performance in younger master swimmers (30–39 years) seem more dependent on kinematic swimming variables than on strength parameters, which were most related to swimming performance in the older master swimmers (40–49 years).
Źródło:
Acta of Bioengineering and Biomechanics; 2016, 18, 2; 145-151
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies