Autor: Siemińska - Jankowska, B. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Some problems pistons made from composite materials with small hysteresis to combustion engines
Autorzy:: Jankowska-Sieminska, B.
Powiązania:: https://bibliotekanauki.pl/articles/245555.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
combustion engine piston
composite alloys
thermal expansion
hysteresis
Opis:: Novel composite ma hysteresisterials on the pistons are characterised that they occur in them multiple intermetallic phases which crystallize in the high temperature, before crystallization of the alfa+beta (Al+Si) eutectic. For forming of pre-eutectic phases, chromium and molybdenum are introduced to silumins, and for derivation of multiple increased concentration of nickel and copper and decreased concentration of magnesium are accomplished. On the basis of evaluations of mechanical and thermal loads of combustion engines pistons applying essence of composite materials of combustion engines pistons, as well requirements for combustion engines pistons, especially high loaded engines are expressed. Test results of hardness, influence of temperature of casting, test results of mechanical properties, friction coefficient and coefficient of thermal expansion are presented in the paper. The special attention devoted to so called hysteresis coefficient of thermal expansion and hysteresis of the relative elongation in function temperature and time. Courses of coefficient of thermal expansion for standard and composite material are presented. Differences of the a coefficient during heating and cooling in function temperature are relative to kind of heat treatment. Two-stage heat treatment is beneficial for the obtainment small values of the a coefficient.
Źródło:: Journal of KONES; 2011, 18, 3; 123-128
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Composite alloy for IC engine pistons
Autorzy:: Jankowska-Sieminska, B.
Jankowski, A.
Sławinski, Z.
Powiązania:: https://bibliotekanauki.pl/articles/246922.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
engine pistons
composite alloys
thermal analysis
Opis:: Aluminum is the most popular matrix for the metal matrix composites The Al alloys are attractive due to their low density, their capability to be strengthened by precipitation, their good corrosion resistance, high thermal and electrical conductivity, and their high damping capacity. The characteristics of metal matrix composite materials are determined by their microstructure and internal interfaces, which are affected by their production and thermal mechanical treatment. Investigations to improve the combustion piston engines arę leading to improve the working process performance by increase ofits parameters, especially the average temperature of the thermodynamic cycle. New piston consists of two parts manufactured of standard and composite materials are presented in the paper. Composite alloy has chemical composition of short fibre with Al2 O3 was following, in the mass percentage: 96% Al2 03, 4%, SiO2. As the binder the colloidal silica was used in quantity 5%. The volume of fibres in the insert was 22 plus or minus 2% by volume. Bending strength of the insert was 0.5 MPa. Temperature and stresses distribution in standard piston and different versions of composite pistons are introduced in the paper. The paper presents the resistance of investigated materials on thermal shocks. Experimental veriflcation of manufactured composite pistons in the engine proved the larger exhaust temperaturę for about 20-70°C, in comparison with the engine with standard pistons (that gives the greater effectiveness of turbo charging application), proved the lowering of a individual volume of gases blow-bys to the crankcase, the lowering of noise level, larger resistance on thermal loads.
Źródło:: Journal of KONES; 2010, 17, 2; 159-166
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Preliminary research no vel composite materials with small hysteresis and high functional parameters for combustion engines pistons
Autorzy:: Siemińska-Jankowska, B.
Powiązania:: https://bibliotekanauki.pl/articles/246073.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
engine pistons
thermal expansion
hysteresis
Opis:: Pistons of internal-combustion engines are the most loaded elements of internal-combustion engines, belong to these specialistic elements, which have essential influence on the ecological properties of engines, their durability and reliability. The object of paper is pistons manufactured from the standard material and from new research alloy. The investigations were performed with dilatometer permitting on the registration of changes of the dimensions of sample in the function of temperature and time. The measurements are possible in straight system and in differential system. Exemplary results of investigations are presented in the paper. During the piston heating, period preutectic phases succumb the partial dissolution in solid solution a, but in the cooling process they secrete again. As a consequence the piston partial deformation occurs, which by result is gradual growth of difference between its expansibility during the warming and contraction in the process of cooling (so-called hysteresis occurs). The characteristics of the new piston silumin alloys give possibility of dearances minimalization and the obtainments of a correct engine performance in the full range of engine rotational velocities and loads. The effect are the decrease of the oil expenditure, the decrease of the emission of hydrocarbons in exhaust gases, the decrease of blowbys to crankcase, the decrease of the expenditure of piston rings grooves wear and the piston skirt wear, the decrease of the piston deformation and the increase of engine durability and reliability.
Źródło:: Journal of KONES; 2009, 16, 1; 447-452
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Analysis and research of piston working conditions of combustion engine in high thermal load conditions
Autorzy:: Jankowska-Sieminska, B.
Jankowski, A.
Slezak, M.
Powiązania:: https://bibliotekanauki.pl/articles/243400.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine
piston
thermal load
thermal expansion
thermal shock
Opis:: Explanation of phenomena occurring in pistons of combustion engines which appear during heating and cooling processes in reference to standard materials and composite materials of high material proprieties is aim of the paper. Bring over researches were mostly directed on measurements of difference dimensions which appear during the piston work in the combustion engine. The paper concentrates on phenomenon of different proprieties of materials. The thermal stresses and shocks differ. In the thermal shock, thermal stresses are caused by instantaneous temperature gradients which appear at high engine speed. These stresses are determined thro temperature distribution and they do not differ from stresses in steady-state conditions. Researches concerning thermal expansions were performed by means of sensitive dilatometer which can work in simple and differential system. Changes of dimensions versus temperature function were measured with inductive sensor and the sensitive Pt-ptrh thermocouple, and results were referred to reference material-Platinum. Research results are illustrated on diagrams of different courses of changes of the of thermal expansion coefficient during heating and cooling of standard and composite materials. Values of the thermal expansion coefficient a for the heating and cooling are smaller for composite alloys. The course of the coefficient â during cooling can be higher or lower from the coefficient a during heating. Similar values were also received. Maximum differences were of 10%. Smaller values of the coefficient a for composite alloys cause that for such the same thermal loads temperature gradients will be smaller for composite alloys. Courses of changes of the coefficient â have a different characteristics suited from chemical composition of alloy, granularity of the composite component and thermal treatment.
Źródło:: Journal of KONES; 2007, 14, 3; 233-243
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Analysis of thermodynamical parameters of combustion engine working cycle
Autorzy:: Siemińska - Jankowska, B.
Ambrozik, A.
Jankowski, A.
Ślęzak, M.
Powiązania:: https://bibliotekanauki.pl/articles/246372.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine
engine thermodynamics
engine working cycle
Opis:: Thermodynamics systems may be classified as isolated, closed, or open based on the possible transfer of mass and energy across the system boundaries. An isolated system is one that is not influenced in any way by the surroundings. This means that no energy in the form of heat or work may cross the boundary of the system. In addition, no mass may cross the boundary of the system. A thermodynamic system is defined as a quantity of matter of fixed mass and identity upon which attention is focused for study. A closed system has no transfer of mass with its surroundings, but may have a transfer of energy (either heat or work) with its surroundings. An open system is one that may have a transfer of both mass and energy with its surroundings. Described system being an object of the paper is an open system for some phenomena. An object the paper is the thermodynamical analysis of the filling process of the cylinder which occurs in calculated period from the percussion cap of the position the piston at TDC to it position at BDC, at constant average value of the pressure in the cylinder. During durations of the filling process of the cylinder, dirt of the working charge combustion products are not taken into account. One accepts that the quantity of the working charge in the established point placed on the compression line by piston BDC is equal quantity of the working charge in the end point of the filling process, answering to the start point of the real compression process. The state of the working charge in cylinder described is four parameters: a pressure, a temperature, quantity moles of the working charge and its volume. For appointment those parameters, earlier worked out dependences are put-upon.
Źródło:: Journal of KONES; 2007, 14, 3; 563-572
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Novel method appointing of the effective heat release coefficient during combustion process based on real indicator diagram
Autorzy:: Jankowski, A.
Ambrozik, A.
Jankowska-Sieminska, B.
Ślęzak, M.
Powiązania:: https://bibliotekanauki.pl/articles/244287.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine
working cycle
thermodynamics
indicator diagram
heat release
Opis:: An object of the paper is a novel method of effective heat release coefficient appointing during combustion process of the based on the real indicator diagram. The process quality of the heat release during process of combustion is evaluated by value of the effective heat release coefficient. Accepted assumptions at appointing effective coefficient of heat release refer to acceptable that thermodynamical parameters of the working charge according to points of the real indicator diagram and the computational diagram are such the same, the maximum pressure of real working cycle of the engine is equal to the pressure of the computational cycle, work of the working charge performed in period from point of closing of the inlet valve to point of the beginning of the exhaust process are for both considered working cycles equal, heat values of the carried to the real and computational cycle are such the same. The method of appointing of the self-ignition delay period is presented in the paper, using to this end intersection point of two graphs of temperature course of the working charge prepared for the first phase of combustion process. Other methods appointing characteristics is suggested in paper basing on the real indicator diagram. The graphic illustration of the preparing method of characteristics of the relative quantity of the heat release during combustion process is illustrated in paper.
Źródło:: Journal of KONES; 2007, 14, 4; 133-142
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Siemińska - Jankowska, B." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język