Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Sawicki, B." wg kryterium: Autor


Tytuł:
Air pollution: how many cigarettes does each Pole ‘smoke’ every year and how does it influence health, with special respect to lung cancer?
Autorzy:
Chudzik, R.
Rybojad, P.
Jarosz-Chudzik, K.
Sawicki, M.
Rybojad, B.
Panasiuk, L.
Powiązania:
https://bibliotekanauki.pl/articles/2085106.pdf
Data publikacji:
2019
Wydawca:
Instytut Medycyny Wsi
Tematy:
lung cancer
PM2.5
air pollution
nitrogen dioxide
PM10
Opis:
Introduction. Air pollution is one of the most important issues of our times. Air quality assessment is based on the measurement of the concentration of substances formed during the combustion process and micro-particles suspended in the air in the form of an aerosol. Microscopic atmospheric particulate matters (PM) 2.5 and 10 are mixtures of organic and inorganic pollutants smaller than 2.5 and 10 μm, respectively. They are the main cause of negative phenomena in the earth’s atmosphere of Earth and human health, especially on the respiratory and cardiovascular systems. Particulates have the ability to cause permanent mutations of tissue, leading to neoplasms and even premature deaths. Nitrogen dioxide (NO2) is one of the main pollutants which arises mainly during the burning of fossil fuels. Based on numerous scientific researches, it has been proved that long-term exposure to NO2 could increase morbidity of cancer due to inflammatory processes increasing abnormal mutations. Materials and method. Data available in the Polish National Cancer Registry, Chief Inspectorate for Environmental Protection and Map of Health Needs in the Field of Oncology for Poland, WHO Air Quality Guidelines 2005 were analyzed. Air pollution was also evaluated: PM2.5, PM10, NO2, and compared with lung cancer morbidity. Results and conclusions. Based on the available data and literature, it can be concluded that in 2009–2017, on average, each Pole smoked ten cigarettes a day +/- 2. Therefore, it can be estimated that after 60 years everyone had 30 package-years of smoking, leading to a high risk of lung cancer and other smoking related diseases. Additionally air quality in Poland is not satisfactory, exceeding the standards presented in the WHO Guidelines 2005. It can be assumed that this may translate into an additional, independent continuous increase in morbidity and mortality dependent on smoking.
Źródło:
Annals of Agricultural and Environmental Medicine; 2019, 26, 4; 566-571
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An analysis of crystallographic texture and residual stresses of aluminium alloy RSA-501 after selected processes of twist extrusion (TE)
Autorzy:
Byczkowska, P.
Sawicki, J.
Adamczyk-Cieślak, B.
Januszewicz, B.
Powiązania:
https://bibliotekanauki.pl/articles/24200596.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
severe plastic deformation
twist extrusion
aluminium
FEM
crystallographic texture
stress
hardness
odkształcenie plastyczne
wyciskanie skrętne
tekstura krystalograficzna
naprężenie
twardość
Opis:
Purpose: This study presents the residual stress analysis for the twist extrusion (TE) process after the experiment and numerical simulation and the analysis of the crystallographic texture changes and changes in hardness before and after the TE process for an RSA-501 aluminium alloy (Al; Mg5%; Mn1.5%; Sc0.8%; Zr0.4%). Design/methodology/approach: Crystallographic textures were obtained with the PANAlytical Empyrean X-ray diffractometer. The stresses were measured by applying the X-ray method with the use of using the PROTO iXRD diffractometer. Findings: The use of severe plastic deformation processes in the mass of the material leads to a significant change difference in the stress distribution in the workpiece and a change in texture compared to the reference material. The stress distribution in the sample cross-section and stress values varied and depended on the stage of the twisting process to which the surface was subjected. The highest stress (about 600 MPa) appears at the peaks of the front surface when exiting the twist area die TE. Higher stress values at the edges of the specimen are caused by friction (deformation) of the material against the die surface. The TE process strengthened – the highest crystallographic texture background level was 49%. Practical implications: The conducted tests and the obtained results allow the determination of the process parameters and critical areas of the sample by carrying out a numerical simulation. Originality/value: Microhardness increases due to the TE process and the largest values were observed at the edges. This phenomenon is confirmed by the numerical simulation results presented in this paper.
Źródło:
Archives of Materials Science and Engineering; 2022, 118, 1; 5--28
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An attempt to assess the promotion and intensity of tourism and leisure in Kozłowiecki Landscape Park
Autorzy:
Sawicki, B.
Mazurek-Kusiak, A.
Powiązania:
https://bibliotekanauki.pl/articles/96338.pdf
Data publikacji:
2017
Wydawca:
Fundacja Ekonomistów Środowiska i Zasobów Naturalnych
Tematy:
promocja
turystyka
rekreacja
park krajobrazowy
promotion
tourism
recreation
landscape park
Opis:
The objective of this study is the assessment of the promotion of tourist and recreational traffic in Kozłowiecki Landscape Park by examining the intensity and preferences as well as social structure of the participants. The research was conducted using the methods of observation and diagnostic survey, including the application of the questionnaire and interview techniques, as well as the technique of documentation analysis. The research was conducted in 2015. On the foundation of the analysis conducted on the research outcome, it was found that in the studied park mainly the local recreational activity is developing. The promotion of the attractive qualities of this area in the provincial capital city, located 13 kilometres away, is poor although it actually exists. It was also found that the tourism-oriented development of the area surrounding the park is low, yet it was noted that the services provided by the nearby Zamoyski Museum in Kozłówka are very well promoted – unfortunately only by one-day visitors. A proposal was put forward to join the forces of the local institutions and communities and develop an offer of a well-designed, comprehensive tourism product, which will also be well promoted.
Źródło:
Ekonomia i Środowisko; 2017, 2; 231-241
0867-8898
Pojawia się w:
Ekonomia i Środowisko
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of genetic similarity of Festuca rubra L. and Festuca nigrescens Lam. sub-populations of the south-eastern part of Poland
Analiza podobieństwa genetycznego sub-populacji Festuca rubra L. i Festuca nigrescens Lam. w południowo-wschodniej części Polski
Autorzy:
Dabrowska, A.
Sawicki, B.
Powiązania:
https://bibliotekanauki.pl/articles/27505.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Botaniczne
Opis:
The investigation of genetic similarity involved Festuca rubra L. and Festuca nigrescens Lam. ecotypes. The study plants originated from sub-populations in the south-eastern part of Poland. The analysis of the genetic similarity was performed by the PCR technique with the use of semi-specific primers targeting 12–18 bp long plant gene sequences from the exon targeting (ET) and intron targeting (IT) group. The investigations were carried out using 21 primers. In total, 735 DNA fragments were obtained, out of which the individual primers amplified from 16 (ET 10/18mer) to 56 (ET 11/18mer) fragments. On average, one primer yielded 32.38 polymorphic products from 11 (IT 28/12mer) to 56 (ET 11/18mer). In total, 680 (91.62%) polymorphic products were obtained. The primers used generated PCR products which exhibited high polymorphism. In the case of the 18-nucleotide primers, the number of amplified polymorphic fragments was more than 96%. Based on the results obtained, it was found that Nei’s genetic similarity for the Festuca rubra and Festuca nigrescens sub-populations analysed was high enough to correspond to the sub-species status. The genetic similarity between ecotypes of the species is closely related to the site of occurrence of the genotypes studied. The highest similarity was found between ecotypes growing in the immediate vicinity of each other.
Przeprowadzono badania podobieństwa genetycznego sub-populacji Festuca rubra L. i Festuca nigrescens Lam. pochodzących z południowo-wschodniej części Polski. Analizę podobieństwa genetycznego przeprowadzono techniką PCR z zastosowaniem starterów semi-specyficznych ukierunkowanych na sekwencje genów roślinnych z grupy ET i IT o długości od 12 do 18 zasad. Badania przeprowadzono z udziałem 21 starterów. Łącznie uzyskano 735 fragmentów DNA, z czego poszczególne startery powielały od 16 (ET 10/18mer) do 56 (ET 11/18mer) odcinków. Średnio na starter przypadało 32.38 polimorficznych produktów od 11 (IT 28/12mer) do 56 (ET 11/18mer). Łącznie otrzymano 680 (91.62%) produktów polimorficznych. Stosowane startery generowały produkty PCR, wykazujące wysoki polimorfizm. W przypadku starterów 18-nukleotydowych liczba powielonych fragmentów polimorficznych wynosiła ponad 96%. Na podstawie uzyskanych wyników stwierdzono, że podobieństwo genetyczne Nei’a dla badanych sub-populacji Festuca rubra i Festuca nigrescens jest na tyle wysokie, że odpowiada statusowi podgatunków. Podobieństwo genetyczne pomiędzy ekotypami tych gatunków ma ścisły związek z miejscem występowania badanych genotypów. Największe podobieństwo wystąpiło pomiędzy ekotypami rosnącymi najbliżej siebie.
Źródło:
Acta Agrobotanica; 2013, 66, 2
0065-0951
2300-357X
Pojawia się w:
Acta Agrobotanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the impact of double shot peening on the value of roughness parameter and distribution of stresses in the RSA 501 alloy
Autorzy:
Byczkowska, P.
Sawicki, J.
Januszewicz, B.
Stegliński, M.
Powiązania:
https://bibliotekanauki.pl/articles/957816.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
shot peening
double shot peening
surface treatment
residual stresses
roughness
Opis:
The bead blasting process is widespread in both the automotive and aerospace industry and is performed in order to improve the fatigue strength of various components. Bead blasting is a cold plastic forming process during which the surface of the material processed is hit by small, hard particles consisting of steel pellets, bearing balls or glass beads. It increases the hardness of the outer layer and establishes compression stresses inside it, which is why this processing is often used to improve fatigue strength. Contrary to other peening methods, bead blasting does not result in a reduction in the height of the processed surface’s unevenness in most cases. Shot peening changes the residual tensile stresses into residual compression stresses, thanks to which, the lifetime of the parts processed is extended and their carrying capacity is increased. The double shot peening process proposed by the authors consists in a two-stage bead blasting process. The first stage consists in blasting with round cast steel pellets, pellets cut from wire or cast iron pellets. During the second stage the same samples underwent glass bead blasting. The tests conducted on the RSA-501 aluminum alloy indicate that as a result of the processing medium’s impact in the form of glass beads or pellets of different diameter and shape, a permanent plastic deformation of the material surface occurs. On the basis of the obtained results it is possible to infer that the choice of parameters of both conventional shot peening and the double shot peening determine the impact thereof on the material’s mechanical properties. Thanks to the application of the double shot peening process there is a noticeable decrease in value of the Ra parameter, by about 40% on average. When analyzing the compressive stress results it is possible to state that after the first blasting process the value of stress was increasing when moving deeply into the sample from its surface, while after the glass bead blasting the value of compressive stress was significantly higher already near the surface. Double shot peening results in an increase in the value of compressive stresses by 40-50% when compared to conventional blasting.
Źródło:
Advances in Science and Technology. Research Journal; 2017, 11, 3; 1-9
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of ionizing radiation for synthesis, modification & sterilization of novel biomaterials and innovative medical devices
Autorzy:
Rosiak, J. M.
Adamus, A.
Bauer, A.
Czechowska-Biskup, R.
Kadlubowski, S.
Matusiak, M.
Mozalewska, W.
Olejnik, A. K.
Rokita, B.
Sawicki, P.
Sowinski, S.
Szafulera, K.
Wach, R.
Ulanski, P.
Powiązania:
https://bibliotekanauki.pl/articles/284822.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
biomaterials
medical devices
sterilization
Źródło:
Engineering of Biomaterials; 2016, 19, 138; 64
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of economic functions and tourist attractions of “Korzeniowy Dół” in Kazimierz Dolny in the light of sustainable development
Autorzy:
Mazurek-Kusiak, A. K.
Sawicki, B.
Powiązania:
https://bibliotekanauki.pl/articles/96770.pdf
Data publikacji:
2018
Wydawca:
Fundacja Ekonomistów Środowiska i Zasobów Naturalnych
Tematy:
Kazimierz Dolny
tourism
nature protection
commercialization
turystyka
ochrona przyrody
komercjalizacja
Opis:
The purpose of this study is to determine the way of tourism management of the loess ravine “Korzeniowy Dół” in Kazimierz Dolny on the Vistula river, taking into account the principles of sustainable development. This report uses secondary results obtained from the City Hall of Kazimierz Dolny. These were electronic measurements of the tourist traffic on the Vistula Boulevard and the number of tickets sold to the Castle and the Tower as well as Góra Trzech Krzyży. In addition, diagnostic survey was conducted using the questionnaire and direct interview. “Korzeniowy Dół” is one of the products that create the image of Kazimierz Dolny as a tourist town and should be developed in such a way that erosion processes are maximally slowed down. This ravine should be completely closed for traffic.. The bottom of the ravine should be drained and water should be drained through a pipe to the ditch. The bottom of the ravine should remain a ground road used only for pedestrian traffic, as it is only possible way to this tourist and natural attraction preserve for other generations. Visiting the ravine should be paid, like the entrance to Góra Trzech Krzyży, which will contribute to the protection of attractions and will help raise funds for the expansion of accompanying tourist infrastructure. The originality of the work consists in indicating the way of commercialization of the loess ravine in Kazimierz Dolny.
Źródło:
Ekonomia i Środowisko; 2018, 3; 170-180
0867-8898
Pojawia się w:
Ekonomia i Środowisko
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania rusztowań na placu budowy
Research on scaffolding at construction sites
Autorzy:
Hoła, B.
Sawicki, M.
Szóstak, M.
Błazik-Borowa, E.
Czarnocki, K.
Szer, J.
Powiązania:
https://bibliotekanauki.pl/articles/129017.pdf
Data publikacji:
2016
Wydawca:
PWB MEDIA Zdziebłowski
Tematy:
safety of work
scaffolding
construction catastrophes
accidents at work
near miss
bezpieczeństwo pracy
badaniie rusztowań
katastrofy budowlane
wypadki przy pracy
zdarzenie potencjalnie wypadkowe
Opis:
Implementation of construction works is an activity burdened with a high risk of the occurrence of adverse events, such as: construction catastrophes, accidents at work or near misses. Fatal and severe accidents cause particularly strong overtones in society. They are very often a result of a fall from a height and associated with working on scaffolding. A gap in this area of knowledge has given impetus to initiate research on safety of work on scaffolding. In order to carry out comprehensive research of scaffolding workplaces on construction sites, a scientific consortium has been set up, which consists of: the Faculty of Architecture and Civil Engineering from Lublin University of Technology; the Faculty of Management from Lublin University of Technology; the Faculty of Civil Engineering, Architecture and Environmental Engineering from Lodz University of Technology and the Faculty of Civil Engineering from Wroclaw University of Science and Technology. This Consortium is carrying out a research project entitled "A model of risk assessment of the occurrence of building catastrophes, accidents and dangerous events at workplaces using scaffolding", which is funded by the National Centre for Research and Development.
Realizacja robót budowlanych jest działalnością obarczoną wysokim poziomem ryzyka wystąpienia zdarzeń niepożądanych, takich jak: katastrofy budowlane, wypadki przy pracy lub zdarzenia potencjalnie wypadkowe (near misses). Szczególnie duży wydźwięk w społeczeństwie wywołują wypadki śmiertelne i ciężkie. Są one bardzo często skutkiem upadku z wysokości i niejednokrotnie mają związek z pracą na rusztowaniach. Luka w tym obszarze wiedzy dała impuls do zainicjowania badań naukowych dotyczących bezpieczeństwa pracy na rusztowaniach budowlanych. W celu przeprowadzenia wszechstronnych badań stanowisk pracy jakimi są rusztowania na placu budowy, powołano konsorcjum naukowe, w skład którego wchodzą: Wydział Architektury i Budownictwa Politechniki Lubelskiej, Wydział Zarządzania Politechniki Lubelskiej, Wydział Budownictwa, Architektury i Inżynierii Środowiska Politechniki Łódzkiej oraz Wydział Budownictwa Lądowego i Wodnego Politechniki Wrocławskiej. Konsorcjum to realizuje projekt badawczy zatytułowany „Model oceny ryzyka wystąpienia katastrof budowlanych, wypadków i zdarzeń niebezpiecznych na stanowiskach pracy z wykorzystaniem rusztowań budowlanych” finansowany przez Narodowe Centrum Badań i Rozwoju.
Źródło:
Builder; 2016, 20, 12; 80-83
1896-0642
Pojawia się w:
Builder
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie potencjału pomiarowego aparatu cyfrowego typu SLR Kodak DCS Pro 14n (13.5 MP)
Evaluation of the measuring potential of Kodak DCS Pro 14n (13.5 MP) SLR digital camera
Autorzy:
Sawicki, P.
Ostrowski, B.
Powiązania:
https://bibliotekanauki.pl/articles/129958.pdf
Data publikacji:
2007
Wydawca:
Stowarzyszenie Geodetów Polskich
Tematy:
lustrzanka cyfrowa
dystorsja sygnału
samokalibracja
metoda wiązek
digital SLR camera
signal distortion
self-calibration
bundle adjustment
Opis:
Badanie jakości radiometrycznej sygnału i samokalibrację fotogrametryczną przeprowadzono dla lustrzanki cyfrowej Kodak DCS Pro 14n wyposażonej w sensor CMOS (format 36×24 mm, rozdzielczość 4500×3000). Ocenę poziomu szumów i dystorsji sygnału przetwornika CMOS IBIS4-14000 (FillFactory NV, Belgia) wykonano w autorskim programie "Image Analysis" napisanym w języku Delphi 7. Program oblicza średnia wartość poziomu szarości, wariancje oraz odchylenie standardowe dla każdego piksela w zdefiniowanych obszarach zainteresowania sekwencji obrazów. Na podstawie analizy sekwencji 30 obrazów stwierdzono, _e obrazy rejestrowane aparatem Kodak DCS Pro 14n charakteryzują się niskim poziomem szumów i wysoka jakością układu przetwarzającego dane. Dla jasności I średnie odchylenie standardowe wyniosło SdtDev = 1.5 (kanał R: SdtDev = 1.7, kanał G: SdtDev = 1.6, kanał B: SdtDev = 2.1). Samokalibracje on-the-job z dodatkowymi parametrami modelującymi błędy systematyczne obrazu: A1 , A2 , B1 , B2 , C1 , C2 , łącznie z wyznaczeniem współrzędnych 3D dla ca 110 sygnalizowanych punktów (30 punktów kodowanych, kod 12 bit) pola testowego, przeprowadzono programem AICON 3D Studio firmy AICON Systems GmbH, Niemcy. Siec zdjęć tworzyła konfiguracja 11 zdjęć zbieżnych wykonanych z odległości ca YF = 5 m. Wszystkie punkty na zdjęciach cyfrowych zostały pomierzone w pełni automatycznie. Średnia wartość Sigma 0 po wyrównaniu metoda wiązek wyniosła _0 = ±0.055 piksela. Podstawowe elementy orientacji wewnętrznej: cK, x¢ 0 , y¢ 0 wyznaczone zostały z dokładnością ±0.2 piksela. Średnie odchylenie standardowe wyznaczonych współrzędnych wyniosły odpowiednio: SXY = ±0.03 mm, SZ = ±0.04 mm. W prezentowanej aplikacji bliskiego zasięgu przy zastosowaniu profesjonalnej lustrzanki cyfrowej Kodak DCS Pro 14n otrzymano względną dokładność opracowania analitycznego rzędu ca 1: 150 000.
The study on the radiometric signal quality and the photogrammetric self-calibration was performed for the Kodak DCS Pro 14n SLR digital camera with the CMOS sensor (format size of 36×24 mm, full resolution of 4500×3000). The examination of noise level and the signal distortion in the CMOS IBIS4-14000 (Fill Factory NV, Belgium) converter was determined in the "Image Analysis" authors’ software, which was written with the Delphi 7 programming tools. The program calculates mean grey level value, variance and standard deviation for each pixel in the defined areas of interest in the image sequences. Based on the analysis of 30 image sequences, it was found that low noise level and high quality of data processing module were characteristic for the Kodak DCS Pro 14n camera. In the brightness channel I, the mean standard deviation amounted to SdtDev = 1.5 (channel R: SdtDev = 1.7, channel G: SdtDev = 1.6, channel B: SdtDev = 2.1). The on-the-job self-calibration with additional digital imaging systematic errors modelling parameters: A1, A2, B1, B2 , C1, C2 and the calculation with ca 110 signalised points 3D coordinates (30 coded points, 12 bit code) on a test field, was determined in the AICON 3D Studio program (AICON Systems GmbH, Germany). The digital image network was created by the configuration of eleven convergent photos registered from the distance of ca YF = 5 m. All points in digital images were measured completely automatically. The Sigma 0 mean value after the combined bundle adjustment amounted to _0 = ±0.055 pxl. Basic parameters of interior orientation: cK, x¢ 0 , y¢ 0 were determined with the accuracy of ±0.2 pxl. The mean standard deviation of calculated coordinates amounted to: SXY = ±0.03 mm, SZ = ±0.04 mm. In the presented close range application, when the Kodak DCS Pro 14n SLR digital camera was used, a relative accuracy of 3D coordinates analytical estimation of 1: 150 000 in the object space was achieved.
Źródło:
Archiwum Fotogrametrii, Kartografii i Teledetekcji; 2007, 17b; 729-738
2083-2214
2391-9477
Pojawia się w:
Archiwum Fotogrametrii, Kartografii i Teledetekcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka plonowania ekotypów Dactylis L., Festuca arundinacea Schreb., Poa pratensis L.
Autorzy:
Sawicki, B.
Jargiello, J.
Powiązania:
https://bibliotekanauki.pl/articles/806814.pdf
Data publikacji:
1997
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Opis:
Ekotypy zbierano jako klony z siedlisk naturalnych. Badano ich plonowanie, liczbę pędów wegetatywnych i eneratywnych, wysokość roślin oraz długość kwiatostanów i porównywano je z odmianami uprawnymi. Na podstawie analizy statystycznej zebranych wyników obliczono: NIR (α=0,05), współczynnik korelacji i zmienności. Wśród zgromadzonego w kolekcji materiału znaleziono wiele egzemplarzy o cechach zbliżonych lub nawet nieco przewyższających odmiany przyjęte za wzorce. Pod względem plonowania najwięcej takich egzemplarzy zanotowano u Poa pratensis L., a najmniej u Festuca arundinacea Schreb.
The ecotypes were gathered as clones from natural habitats. Their yielding, number of vegetative and generative shoots, plant height as well as the length of inflorescence were investigated and compared with the cultivated varieties. Basing on statistical analysis of the results the: LSD (α=0.05), correlation and variability coefficients were computed. Among collected material there was a lot of individuals close or even slightly better than the varieties accepted as standards. As regards the yielding, the highest number of such individuals were noted in Poa pratensis L. while the lowest - in Festuca arundinacea Schreb.
Źródło:
Zeszyty Problemowe Postępów Nauk Rolniczych; 1997, 451
0084-5477
Pojawia się w:
Zeszyty Problemowe Postępów Nauk Rolniczych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Correlation between the band-gap energy and the electrical conductivity in MPr₂W₂O₁₀ tungstates (where M = Cd, Co, Mn)
Autorzy:
Sawicki, B.
Tomaszewicz, E.
Piątkowska, M.
Groń, T.
Duda, H.
Górny, K.
Powiązania:
https://bibliotekanauki.pl/articles/1160256.pdf
Data publikacji:
2016-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.20.Ci
72.20.-i
72.80.Sk
Opis:
The values of the direct allowed energy gap determined from the UV-vis-NIR measurements and Kubelka-Munk transformation decrease from 3.38 via 2.70 to 2.42 eV for MPr₂W₂O₁₀ in the sequence M = Cd, Co, Mn, while the values of the activation energy increase from 0.11 via 0.44 to 0.47 eV in the same sequence. In other words, the higher the activation energy, the smaller the energy gap. Because the energy gap is typical for insulators, so electron transport phenomena are considered under the Poole-Frenkel effect and small-polaron mechanism.
Źródło:
Acta Physica Polonica A; 2016, 129, 1a; A-94-A-96
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cyfrowy system video termalny dla aplikacji w bliskim zasięgu
Autorzy:
Sawicki, P.
Więcek, B.
Powiązania:
https://bibliotekanauki.pl/articles/130856.pdf
Data publikacji:
1998
Wydawca:
Stowarzyszenie Geodetów Polskich
Tematy:
system cyfrowy
kamera termowizyjna
digital system
thermovision camera
Źródło:
Archiwum Fotogrametrii, Kartografii i Teledetekcji; 1998, 8; 13-1-13-9
2083-2214
2391-9477
Pojawia się w:
Archiwum Fotogrametrii, Kartografii i Teledetekcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Czynniki technologiczne wpływające na zużyci wody w zakładzie przetwórstwa drobiarskiego
Technological factors affecting water consumption in a poultry processing plant
Autorzy:
Dróżdż, B.
Wojdalski, J.
Sawicki, J.
Gujski, G.
Powiązania:
https://bibliotekanauki.pl/articles/228419.pdf
Data publikacji:
2006
Wydawca:
Wyższa Szkoła Menedżerska w Warszawie
Tematy:
przetwórstwo drobiarskie
zużycie wody
wskaźniki jednostkowego zużycia wody
formuły empiryczne
poultry processing
water consumption
per-unit water consumption indices
empirical formulas
Opis:
Woda jest istotnym nośnikiem energii i jej pobór jest skorelowany ze zużyciem energii elektrycznej w zakładach produkcyjnych. W artykule przedstawiono wyniki badań nad zużyciem wody w zakładzie przetwórstwa drobiarskiego. Stosując formuły empiryczne określono wpływ struktury przerobu na wielkość miesięcznego zużycia wody i zakładowe wskaźniki jednostkowego zużycia wody.
Water is an important energy carrier and its intake is correlated with the consumption of electrical energy in production plants. This study presents water consumption research results in a poultry processing plant. By the application of empirical formulas the influence of throughput was determined on the volume of monthly water consumption and per-unit water consumption indices.
Źródło:
Postępy Techniki Przetwórstwa Spożywczego; 2006, T. 16, nr 1, 1; 51-54
0867-793X
2719-3691
Pojawia się w:
Postępy Techniki Przetwórstwa Spożywczego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design and manufacture of customized medical implants
Autorzy:
Elgalal, M.
Komorowski, P.
Makowski, K.
Styczyński, A.
Ulański, P.
Kubiak, T.
Sawicki, J.
Domżalski, M.
Walkowiak, B.
Powiązania:
https://bibliotekanauki.pl/articles/285113.pdf
Data publikacji:
2018
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
implants
patient anatomy
manufacturing
Źródło:
Engineering of Biomaterials; 2018, 21, 148; 36
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dziedzictwo kulturowe Środkowego Roztocza jako czynnik rozwoju turystyki
Cultural heritage of the Middle Roztocze as a force of tourism development
Autorzy:
Golian, S.
Sawicki, B.
Powiązania:
https://bibliotekanauki.pl/articles/85494.pdf
Data publikacji:
2010
Wydawca:
Polska Asocjacja Ekologii Krajobrazu
Tematy:
turystyka
Roztocze
walory turystyczne
dziedzictwo kulturowe
Źródło:
Problemy Ekologii Krajobrazu; 2010, 27
1899-3850
Pojawia się w:
Problemy Ekologii Krajobrazu
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies