Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Rodziewicz, J." wg kryterium: Autor


Tytuł:
Zastosowanie tarczowych złóż biologicznych do oczyszczania ścieków z hodowli ryb
Application of rotating biological contactor for treatment of wastewaters from fish breeding
Autorzy:
Rodziewicz, J.
Filipkowska, U.
Janczukowicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/1819578.pdf
Data publikacji:
2011
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
hodowla ryb
złoża biologiczne
oczyszczanie ścieków
Opis:
Związki azotu negatywnie wpływają na odbiorniki, do których są odprowadzane. Zużywają tlen w procesach utleniania azotu amonowego, co toksycznie wpływa na ryby. Poza tym azot, podobnie jak fosfor, jest czynnikiem powodującym eutrofizację zbiorników wodnych, dlatego redukcja jego zawartości w ściekach jest konieczna. Azot wprowadzany do odbiorników, pochodzi nie tylko ze ścieków komunalnych, ale również z takich gałęzi gospodarki jak przemysł czy rolnictwo. Duże zagrożenie dla wód powierzchniowych stanowi intensywny chów ryb, w szczególności prowadzony w naturalnych akwenach jezior. Z uwagi na ochronę środowiska intensywną hodowlę ryb w zbiornikach naturalnych zastępuje się hodowlą z zamkniętym obiegiem wody, co prowadzi między innymi do zmniejszenia wodochłonności produkcji .
This manuscript describes a study conducted in the fractional-technical scale on a rotating electro-biological contactor operating under conditions of electric current flow with a density of: 4.75 mA/m2. Stainless-steel disks with immobilized biomass served as a cathode, whereas an aluminum electrode mounted in the flow tank of the contactor - as an anode. The study was aimed at determining the feasibility of applying electrolytically-aided denitrification in the treatment process of waters from intensive fish breeding. The waters used in the experiment originated from the culture of barramundi fish conducted in a closed system. They were characterized by a high concentration of nitrogen compounds - 79.98 mgN/dm3 and a relatively low concentration of organic compounds expressed as COD - 110.82 mg/dm3, which made the application of the classical denitrification process impossible. The technological design of the study assumed that nitrogen compounds would be subject to reduction during electric current flow. In turn, in the process of water electrolysis, gaseous hydrogen would be produced on the cathode's surface, that would be further utilized as a source of electron donor by autotrophic microorganisms in the denitrification process, owing to the formation of anoxic areas in the deeper layers of the biofilm due to restricted penetration of oxygen. The study resulted in nearly 30% effectiveness of nitrogen compounds removal and over 40% effectiveness of organic compounds removal.
Źródło:
Rocznik Ochrona Środowiska; 2011, Tom 13; 1233-1243
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena procesów biologicznego usuwania azotanów (V) i fosforanów w komorze SBR z zewnętrznym źródłem węgla
Evaluation of process of biological nitrate and phosphate removal in SBR type reactor with external carbon source
Autorzy:
Janczukowicz, W.
Rodziewicz, J.
Filipkowska, U.
Powiązania:
https://bibliotekanauki.pl/articles/1819597.pdf
Data publikacji:
2011
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
azotany
fosforany
węgiel
lotne kwasy tłuszczowe
nitrates
phosphates
coal
volatile fatty acids
Opis:
Celem pracy jest określenie wpływu lotnych kwasów tłuszczowych na szybkość uwalniania i wiązania fosforanów w reaktorze SBR oczyszczającym ścieki charakteryzujące się porównywalnymi stężeniami fosforanów i azotanów (V). Celem pracy jest także ustalenie, czy na przebieg i sprawność procesów defosfatacji i denitryfikacji ma wpływ obecność w biomasie osadu czynnego mikroorganizmów zaadaptowanych wcześniej do określonych źródeł węgla. Zakres pracy obejmował określenie: szybkości uwalniania i wiązania fosforanów w obecności kwasów octowego, propionowego, masłowego, walerianowego, izowalerianowego i kapronowego, wpływu rodzaju kwasu na efektywność usuwania fosforanów szybkości procesu denitryfikacji w fazie mieszania i napowietrzania oraz sprawności procesu denitryfikacji w zależności o rodzaju kwasu z grupy LKT.
Determinations were made for the effect of volatile fatty acids (VFA) on the rate of release and absorption of phosphates and on the rate of nitrates removal in the stirring and aeration phases in an SBR type reactor. The effectiveness of phosphates and nitrates removal, influenced by the fatty acid applied, was determined as well. The experiment was conducted in SBR type reactors in one working cycle (stirring - 3 h, aeration - 4 h and sedimentation - 1 h) in the presence of acetic, propionic, butyric, isobutyric, valeric, isovaleric and caproic acids. The initial concentrations of phosphates and nitrates were: 13.4 mg PPO4?dm-3 and 15.2 mg NNO3?dm-3, respectively. The study demonstrated that phosphates were released with the highest rate in the reactors containing acetic acid (3.35 mg PPO4?dm-3?h-1), whereas with the lowest rate - in these containing butyric acid (1.25 mg PPO4?dm-3?h-1). Also the process of phosphates absorption proceeded with the highest rate in the reactor with acetic acid (4.19 mg PPO4?dm-3?h-1), and with the lowest rate - in the presence of isobutyric acid (2.13 mg PPO4?dm-3?h-1). In the case of acetic acid, the highest rates of both processes corresponded with the most effective dephosphatation process (50.0%). Such an explicit dependency was not, however, noted in the case of other fatty acids. In the stirring phase, the denitrification process proceeded with the highest rate (3.95 mg NNO3?dm-3?h-1) in the reactor containing caproic acid, and with the lowest rate - in the presence of isobutyric acid (3.42 mg NNO3?dm-3? h-1). During aeration, the rate of nitrates concentration decrease was the highest in the presence of butyric acid (0.91 mg NNO3?dm-3?h-1) and the lowest - in the presence of caproic acid (0.52 mg NNO3?dm-3?h-1). The highest rates of denitrification recorded in both phases in the reactor with caproic acid were not tantamount to the highest effectiveness of nitrates removal. It was the acetic acid that turned out to be the most effective source of carbon in the denitrification process (92.6%) The highest efficiency of both examined processes was observed in the presence of acetic acid. Negligibly lower efficiencies were noted in the reactor with butyric acid. In view of the fact that propionic acid was only slightly less effective both in the denitrification as well as dephosphatation process, it may be speculated that the presence of microorganisms, adapted earlier to specified carbon sources, in the biomass of activated sludge is likely to affect the course and effectiveness of both processes in reactors with an external source of carbon.
Źródło:
Rocznik Ochrona Środowiska; 2011, Tom 13; 453-468
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Usuwanie barwnika Basic Violet 10 z roztworów wodnych na zeolicie
Basic violet 10 dye removal from water solutions onto zeolite
Autorzy:
Filipkowska, U.
Rodziewicz, J.
Moczkowska, I.
Powiązania:
https://bibliotekanauki.pl/articles/1819681.pdf
Data publikacji:
2010
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
barwnik basic violet 10
zeolit
roztwór wodny
dye basic violet 10
zeolite
aqueous solution
Opis:
Rozwój technologii dostarcza nie tylko produkty o ulepszonej jakości lecz również wpływa na postępujące skażenie środowiska. W przypadku przemysłu włókienniczego zanieczyszczenie to dotyczy głównie wody. Chemiczna obróbka wyrobów włókienniczych jest przyczyną powstawania ścieków o znacznej zawartości barwników, soli, kwasów, zasad, chemicznych środków pomocniczych, klejonek tkackich itp. [1]. Skład odprowadzanych zanieczyszczeń wpływa na złożoność i koszty procesu ich oczyszczania, a tym samym stanowi obecnie jeden z kluczowych problemów środowiskowych [2]. Przedmiotem coraz częstszych badań jest więc opracowanie takiej metody oczyszczania ścieków, której efekty pozwoliłyby na ponowne wykorzystanie oczyszczonej wody w procesach technologicznych. Obecnie najczęściej stosowanymi metodami oczyszczania ścieków włókienniczych są: adsorpcja, strącanie/koagulacja, ultrafiltracja i odwrócona osmoza, metody biologiczne, utlenianie, redukcja, ekstrakcja [3]. Spośród nich, największe uzasadnienie ekonomiczne związane z minimalizacją kosztów inwestycyjnych i eksploatacyjnych procesu oczyszczania ścieków zawierających barwniki, mogą wykazywać procesy adsorpcji. Powszechnie stosowanymi adsorbentami są węgle aktywne, niemniej jednak ich wysoka cena wymusza poszukiwania nowych, tańszych a jednocześnie równie skutecznych środków [4]. W związku z tym rozwiązania koncentrują się coraz częściej na wdrażaniu naturalnych minerałów, których szerokie możliwości zastosowań, skuteczność ale także ekologiczne bezpieczeństwo użycia, są inspiracją wielu rozwiązań we współczesnych technologiach. Stąd, w ostatnich latach coraz większe zainteresowanie budzą naturalne, ogólnodostępne, tanie minerały o właściwościach molekularno-sitowych, sorpcyjnych i jonowymiennych -zeolity [5].
Contemporarily, the most common methods of textile wastewaters treatment include: adsorption, precipitation/coagulation, ultrafiltration and reversed osmosis, biological methods, oxidation, reduction, and extraction. Out of these methods, the most economical in terms of minimizing investment and exploitation costs of the treatment process of wastewaters containing dyes, are adsorption processes. Commonly applied adsorbents include activated carbons, however their high price enforces searching from new, cheaper and, simultaneously, equally effective agents. For this reason, studies are increasingly focused on implementingnatural materials whose wide applicability, efficiency as well as ecological safety of use inspire a number of solutions in contemporary technologies. Hence, an increasing interest has been raised recently by natural, commonlyavailable, inexpensive minerals with molecular and screening as well as sorptive and ion-exchanging properties, namely zeolites. The reported research was aimed at determining the effectiveness of dyes removal from aqueous solutions with the method of adsorption, using zeolite differing in grain size - coarse-grained zeolite with grain particle size of ? 2-3 mm (sorbent 1) and fine-grained zeolite with grain particle size of ? 0.5-1 mm (sorbent 2). The research was conducted for the cationic dye ? Basic Violet 10 (BV10). The scope of the research included determination of the effectiveness of Basic Violet 10 dye adsorption onto two adsorbents (coarse-grained and finegrained zeolite) and determination of constants from the Langmuir's equation. Basic dyes are dyes that solubilize in water with a color cation produced. The mechanism of basic dyes binding from aqueous solutions may be explained by the intensive donation of a molecular cation (C+), and reduction of an ion (CH+). In water, molecules of zeolite are characterized by a negative charge and electrostatic activity, which induces adsorption of basic dyes. The process of cationic dyes adsorption proceeds considerably weaker at low pH values as a result of the excess of H+ ions that compete with the cationic groups of the dye. Results achieved in the research enable concluding that zeolite is an effective adsorbent in the process of a basic dye BV 10 removal from aqueous solutions. The study demonstrated that the size of adsorbent particles, pH value and duration of adsorption had a significant effect on the effectiveness of the adsorption process. The highest adsorption capacity was achieved for the basic dye BV 10 during adsorption onto fine-grained zeolite at pH 9.0 and accounted for 258 mg/g d.m. In contrast, the lowest adsorption capacity reaching 52 mg/g d.m. was obtained for the BV 10 dye onto the coarse-grained zeolite at pH 3.0. An opposite tendency was noted in the case of adsorption affinity. Along with increasing adsorption capacity, a decrease was recorded in the affinity, irrespective of zeolite grain particle size. The highest adsorption affinity, accounting for 0.428 dm3/mg, was achieved for the Basic Violet 10 dye during adsorption onto the coarse-grained zeolite at pH 3.0. In turn, the lowest value of that parameter, reaching 0.019 dm3/mg, was obtained for the coarse-grained zeolite at pH 9.0. Natural zeolite may, thus, be applied as an adsorbent displaying a high effectiveness of basic dyes removal.
Źródło:
Rocznik Ochrona Środowiska; 2010, Tom 12; 747-760
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania nad elektrolitycznym wspomaganiem procesu denitryfikacji w biologicznym złożu tarczowym
Research on the electrolytically-aided denitrification on the four-stage rotating biological contactor
Autorzy:
Rodziewicz, J.
Filipkowska, U.
Sominka, K.
Powiązania:
https://bibliotekanauki.pl/articles/1819694.pdf
Data publikacji:
2010
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
badania elektrolityczne
proces denitryfikacji
biologiczne złoże
electrolytic study
denitrification process
biological deposit
Opis:
Złoża tarczowe to jedno z rozwiązań złóż biologicznych, w których błona biologiczna rozwija się na szeregu obracających się współosiowo tarcz, częściowo lub całkowicie zanurzonych w ściekach (ruch obrotowy tarcz zapewnia z jednej strony dostarczenie tlenu z powietrza, z drugiej pobór przez biomasę substratów ze ścieków). Najczęściej urządzenia te wykorzystywane są do utleniania związków węgla i wysoko efektywnej nitryfikacji. Z przeglądu piśmiennictwa wynika, że wciąż jest jeszcze niewiele rozwiązań technologiczno-technicznych umożliwiających skuteczne usuwanie w tych urządzeniach związków azotu. Powszechnie stosowanym rozwiązaniem są układy, w których na częściowo zanurzonych tarczach zachodzi nitryfikacja, podczas gdy na tarczach zanurzonych całkowicie - denitryfikacja [15, 17]. Innym rozwiązaniem jest wprowadzenie do biomasy błony biologicznej bakterii Paracoccus denitrificans (dawniej Thiosphaera pantotropha) zdolnej do symultanicznej heterotroficznej nitryfikacji i aerobowej denitryfikacji [3, 4]. Organizmy te w procesie oddychania jako ostateczne akceptory elektronów mogą wykorzystywać symultanicznie azotany i tlen, co przyczynia się do zwiększenia szybkości wzrostu tych mikroorganizmów [16]. Inną możliwością jest prowadzenie na biologicznych złożach tarczowych procesów Anammox (anaerobowe utlenianie azotu amonowego) [2, 6, 13] i CANON (całkowite autotroficzne usuwanie związków azotu przez azotyny) w warunkach ograniczonej zawartości związków węgla w oczyszczanych ściekach [2, 14, 20]. Hippen i wsp. [7], Helmer i Kunst [57] oraz Helmer i wsp. [6] udokumentowali występowanie aerobowej deamonifikacji w procesie wstępnego oczyszczania odcieków z wysypiska śmieci w Mechernich (Niemcy) przy wykorzystaniu biologicznych złóż tarczowych. Podejmowane są próby łączenia biologicznych złóż tarczowych z sekwencyjnymi biologicznym reaktorami (SBR) - sekwencyjny biologiczny reaktor z błoną biologiczną (SBBR). Główną korzyścią SBBR jest możliwość prowadzenia tlenowego usuwania związków organicznych, nitryfikacji i denitryfikacji w jednym reaktorze pracującym w 5-fazowym cyklu [10]. Kolejnym korzystnym rozwiązaniem może być zastosowanie zjawiska przepływu prądu elektrycznego na biologicznych złożach tarczowych. W niektórych gałęziach przemysłów takich jak: wytrawianie metali, produkcja nawozów sztucznych czy produkcja materiałów wybuchowych powstają ścieki o dużym stężeniu azotanów V, a małym stężeniu związków organicznych [19]. Do procesu denitryfikacji tego rodzaju ścieków konieczne jest dodawanie zewnętrznego źródła donora elektronów, jakim może być gazowy wodór, którego zaletą jest niska rozpuszczalność i brak konieczności wtórnego usuwania jego nadmiaru. Sakakibara i wsp. [11, 12] zaproponowali bio-elektrochemiczny reaktor, w którym denitryfikacyjna błona biologiczna jest unieruchomiona na katodzie, na powierzchni której, w wyniku elektrolizy wody, powstaje gazowy wodór wykorzystywany do redukcji azotanów. Z przeglądu piśmiennictwa wynika, że wciąż jest niewiele skutecznych rozwiązań technologiczno-technicznych umożliwiających usuwanie związków azotu na biologicznych złożach obrotowych. Dlatego podjęto badania nad połączeniem procesów elektrochemicznych, powstających podczas przepływu prądu elektrycznego w środowisku ściekowym, z procesami biologicznymi, zachodzącymi na biologicznym złożu tarczowym. Krzemieniewski i Rodziewicz [8] prowadzili badania nad połączeniem procesów elektrochemicznych, powstających podczas przepływu prądu elektrycznego w środowisku ściekowym, z procesami biologicznymi, zachodzącymi na biologicznym złożu tarczowym. W założeniach technologicznych przyjęto, że podczas przepływu prądu elektrycznego nastąpi proces usuwania azotu, ponieważ na powierzchni katody w procesie elektrolizy wody powstaje gazowy wodór, który wykorzystywany jest jako źródło donora elektronów przez mikroorganizmy autotroficzne w procesie denitryfikacji. W omawianym układzie zachodził proces symultanicznej nitryfikacji i denitryfikacji dzięki tworzeniu obszarów aerobowych i anoksycznych. Środowisko anoksyczne powstawało w głębszych obszarach aerobowej błony biologicznej z powodu ograniczenia penetracji tlenu. Celem badań było określenie efektywności procesu elektrolitycznie wspomaganej denitryfikacji w czterostopniowym biologicznym złożu tarczowym przy zmiennym stosunku ChZT/Nog.
Favourable solution may be use of electric current flow phenomenon on rotating biological contactor. In some branches of industry such as: metal etching, production of fertilizers and explosives manufacturing wastewater with high concentrations of nitrates V, and low concentrations of organic compounds is produced [19]. Denitrification process of such type of wastewater requires adding an external source of electron donor, such as hydrogen gas. Its low solubility and no need for secondary removal of its excess are its advantages. Sakakibara et al [11, 12] proposed a bio-electrochemical reactor, in which the denitrifying biological membrane is immobilized on cathode. On its surface, as a result of water electrolysis, the hydrogen gas is formed which is used to reduce nitrates. The review of the literature shows there is little effective technological and technical solutions enabling the removal of nitrogen compounds in rotatingbiological contactors. Therefore, studies were undertaken on a combination of electrochemical processes, occurring during flow of electric current in the wastewater environment with biological processes, occurring in the rotating biological contactor. Subject of this study is research into synthetic wastewater treatment on the four-stage rotating electrobiological contactor (REBC) in two runs. Run I was made with the COD/TN ratio equal to 12, run II - with the COD/TN ratio equal to 6. In both runs were used contactor I, under conventional conditions (lack of current flow), and contactor II which worked in conditions of current flow with density of 14 mA/m 2. In contactor II disks made of stainless steel with immobilized biological film served as a cathode, whereas an electrode made of aluminum- as an anode. Research has shown that process of removal nitrogen compounds was more effective in system with current flow, then efficiency of nitrification process was equal to 92,79% (run I) and 95,4% (run 2), and efficiency of denitrification process was equal to 58,91% (run 1) and 50,95% (run 2). More effective removal of nitrogen compounds in the denitrification process was obtained as a result of the simultaneous use as an energy source, hydrogen gas produced by electrolysis of water and organic matter contained in the treated wastewater.
Źródło:
Rocznik Ochrona Środowiska; 2010, Tom 12; 835-846
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of Electrical Current Density and Type of the External Source of Carbon on Nitrogen and Phosphorus Efficiency Removal in the Sequencing Batch Biofilm Reactor
Autorzy:
Kłodowska, I.
Rodziewicz, J.
Janczukowicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/124929.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
bio-electrochemical reactor
external source of carbon
citric acid
potassium bicarbonate
denitrification
dephosphatation
Opis:
This work presents the results of a study on the effect of electrical current density (53, 105, 158 and 210 mA/m2), type of the external source of carbon (citric acid, potassium bicarbonate), and C/NNO3 ratio (0.5, 1.0 and 1.5) on the effectiveness of nitrogen and phosphorus removal from synthetic wastewater with physicochemical parameters typical of municipal sewage subjected to bio-treatment in the highly efficient system for organic compounds removal ensuring efficient course of the nitrification process. The denitrification efficiency was found to depend on the type and dose of carbon and on the electrical current density. Higher values of this parameter were determined in the reactor with citric acid than in one with potassium bicarbonate used as carbon sources. Total phosphorus was removed in the processes of electrocoagulation and biomass growth. Higher efficiency of dephosphatation was achieved in the reactor with electrical current passage than in the reactor without it. The type of carbon source had little effect on the dephosphatation efficiency. The use of electrical current density of 210 mA/m2 and citric acid as a carbon source with C/N=1.5 allowed achieving 87.61(±1.6)% efficiency of denitrification and 97.69(±2.1)% efficiency of dephosphatation.
Źródło:
Journal of Ecological Engineering; 2018, 19, 5; 172-179
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ lotnych kwasów tłuszczowych (lkt) nA szybkość uwalniania i wiązania fosforanów w reaktorze typu SBR
Effect of volatile fatty acids (vfas) on the rate of release and uptake of phosphate compounds in an SBR type reactor
Autorzy:
Janczukowicz, W.
Rodziewicz, J.
Filipkowska, U.
Powiązania:
https://bibliotekanauki.pl/articles/400297.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
usuwanie biogenów
uwalnianie i wiązanie fosforanów
LKT
SBR
nutrient removal
phosphate release and uptake
VFA
Opis:
Przebadano wpływ lotnych kwasów tłuszczowych (LKT) na szybkość uwalniania i wiązania fosforanów w czasie fazy mieszania i napowietrzania w reaktorze SBR. Określono także sprawności procesów usuwania fosforanów i azotanów (V) w zależności od rodzaju zastosowanego kwasu. Badania przeprowadzono w ramach jednego cyklu pracy SBR (mieszanie - 3 h, napowietrzanie - 4 h i sedymentacja - 1 h) w obecności kwasów: octowego, propionowego, masłowego, izomasłowego, walerianowego, izowalerianowego i kapronowego. Stężenia fosforanów i azotanów na początku cyklu wynosiły odpowiednio 14,1 mg PPO4źdm-3 i 1,22 mg NNO3 dm-3. Stwierdzono, że fosforany uwalniane są z najwyższą szybkością w reaktorach z kwasem octowym (3,85 mg PPO4źdm-3źh-1`) i z najniższą (0,85 mg PPO4źdm-3źh-1) w obecności kwasów izowalerianowego i kapronowego. Również wiązanie fosforanów przebiegało najszybciej w reaktorze z kwasem octowym (5,19 mg PPO4źdm-3źh-1), podczas, gdy najwolniej (2,86 mg PPO4źdm-3źh-1) w obecności kwasu izowalerianowego. Najwyższe szybkości uwalniania i wiązania fosforanów w obecności kwasu octowego były równoznaczne z najefektywniejszym procesem defosfatacji (65,25%). Nie było takiej jednoznacznej zależności w odniesieniu do pozostałych kwasów. Najniższą sprawność usuwania fosforanów, zanotowano w reaktorach dla których zewnętrznym źródłem węgla były kwas izomasłowy (51,06%). Kwas octowy był także najbardziej efektywnym źródłem węgla w odniesieniu do procesu denitryfikacji (57,38%), a najmniej efektywnym był kwas izomasłowy (29,51%). Stwierdzono, że w obecności kwasu octowego zarówno proces defosfatacji jak i proces denitryfikacji przebiegały z najwyższą sprawnością. Najmniej sprzyjającym obu procesom był kwas izomasłowy.
The effect of volatile fatty acids (VFAs) on the rate of phosphates release and uptake during stirring and aeration phases in an SBR type reactor was examined in the study. Additional determinations were carried out for the effectiveness of phosphates and nitrates removal as affected by the type of fatty acid applied.The study was conducted within one working cycle of the SBR (stirring - 3 h, aeration - 4 h and sedimentation - 1 h) in the presence of the following fatty acids: acetic, propionic, butyric, isobutyric, valeric, isovaleric and caproic. Initial concentrations of phosphates and nitrates at the beginning of the cycle accounted for: 14.1 mg PPO4/dm3 and 1.22 mg NNO3/dm3, respectively. Analyses showed that phosphates were released with the highest rate in the reactors with acetic acid (3.85 mg PPO4/dm3.h) and with the lowest rate (0.85 mg PPO4/dm3.h) in the presence of isovaleric and caproic fatty acids. Also the uptake of phosphates proceeded with the highest rate in the reactor with acetic acid (5.19 mg PPO4/dm3.h), and with the lowest rate (2.86 mg PPO4/dm3.h) in the presence of isovaleric acid. The highest rates of phosphates release and uptake in the presence of acetic acid were tantamount with the most effective dephosphatation process (65.25%). Such an explicit dependency was not, however, observed in the case of the other fatty acids. The lowest effectiveness of phosphates removal was noted in the reactors in which isobutyric acid was the external source of carbon (51.06%). Acetic acid was also the most effective source of carbon in the denitrification process (57.38%), whereas isobutyric acid turned out to be the least effective in this respect (29.51%).The study demonstrated that in the presence of acetic acid both dephosphatation and denitrification process were proceeding with the highest effectiveness. The least facilitating both these processes appeared to be isobutyric acid.
Źródło:
Inżynieria Ekologiczna; 2011, 24; 64-73
2081-139X
2392-0629
Pojawia się w:
Inżynieria Ekologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Electrical Current and the External Source of Carbon on the Characteristics of Sludge from the Sequencing Batch Biofilm Reactors
Autorzy:
Kłodowska, I.
Rodziewicz, J.
Janczukowicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/124816.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
bio-electrochemical reactor
denitrification
electrocoagulation
citric acid
potassium bicarbonate
sludge
Opis:
This work presents the results of an experiment on the effect of electrical current density (53, 105, 158 and 210 mA/m2), the type of an external source of carbon (citric acid, potassium bicarbonate) and C/NNO3 ratio (0.5, 1.0 and 1.5) on the quantity and quality of formed sludge. The experiment was conducted in sequencing batch biofilm reactors (SBBRs), under anaerobic conditions, with and without the passage of electrical current, under controlled pH of 7.5–8.0. The study demonstrated that in the reactors with electrical current passage and external source of carbon, the volume of sludge increased along with the current density increase from 53 to 158 mA/m2. At its highest density (210 mA/m2), the concentration of sludge was insignificantly lower. For all densities of electrical current and C/NNO3 values, the concentrations of sludge formed in the reactors with potassium bicarbonate (1.00 to 1.26 g d. m./L) were lower than in the reactors with citric acid (1.26 to 1.30 g d. m./L). The concentration of organic matter was higher in the sludge from the reactors with electrical current passage and potassium bicarbonate, compared to the sludge from the reactors with citric acid. In the reactors with electrical current passage and external source of carbon, the total nitrogen content in the sludge decreased along with the C/NNO3 ratio increase for current densities of 53 and 105 mA/m2. For a higher electrical current density, the nitrogen content in the sludge was similar. Irrespectively of the current density, the nitrogen content in the sludge from the reactors with citric acid was higher than in the sludge from the reactors with potassium bicarbonate. For higher current densities (158 and 210 mA/m2) the increase in the C/NNO3 value caused an increase in the P content in the sludge. The electrical current density increase contributed to increasing the content of phosphorus in the sludge. The phosphorus content in the sludge from the reactors with citric acid was lower than in the sludge from the reactors with potassium bicarbonate. The CST values prove that the sludge formed during the wastewater treatment in electrobiological SBBR was characterized by very high dewaterability. The capillary suction time decreased along with increasing the electrical current density but was not significantly affected by the type of carbon source.
Źródło:
Journal of Ecological Engineering; 2018, 19, 4; 143-152
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Uczestnictwo w pozaszkolnej aktywności ruchowej młodzieży z Częstochowy
Participation of young people from Czestochowa in extra-school physical activity
Autorzy:
Rodziewicz-Gruhn, J.
Powiązania:
https://bibliotekanauki.pl/articles/4730.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Humanistyczno-Przyrodniczy im. Jana Długosza w Częstochowie. Wydawnictwo Uczelniane
Opis:
Badania wykonywane w wielu krajach wskazują na spadek uczestnictwa młodzieży w pozaszkolnej aktywności ruchowej. Nasilająca się wraz z wiekiem hipokinezja, czyli niedobór ruchu, jest przyczyną regresu sprawności i wydolności fizycznej dzieci i młodzieży. Prezentowane doniesienie przedstawia wyniki badań ankietowych przeprowadzonych wiosną 2008 roku, w wybranych liceach ogólnokształcących w Częstochowie. Grupę badawczą stanowiło 200 dziewcząt i chłopców w wieku x = 18,2 ±0,68 lat. W badaniu zastosowano metodę sondażu diagnostycznego. Uzyskane wyniki rozpatrywano w zależności od płci i zweryfikowano statystycznie z zastosowaniem testu dla dwóch frakcji. Istotność różnic określono na trzech poziomach wartości: p < 0,001, p < 0,01, p < 0,05. Przedstawione w obecnej pracy wyniki badań potwierdziły, że chłopcy częściej i chętniej niż dziewczęta podejmują pozaszkolną aktywność ruchową Dziewczęta w czasie wolnym najchętniej uprawiają pływanie, chodzą na wycieczki, jeżdżą na rolkach i biegają. Wśród chłopców najczęściej padającą odpowiedzią było wskazanie na jazdę na rowerze, pływanie, gry zespołowe i bieganie. Badana młodzież z Częstochowy najchętniej podejmuje rekreację ruchową ze znajomymi. Istnieje pilna potrzeba aktywniejszego włączenia się rodziców i szkoły w organizację zajęć rekreacyjnosportowych oraz zachęcania nauczycieli do bardziej profesjonalnego prowadzenia zajęć z wychowania fizycznego uwzględniających indywidualne potrzeby, zainteresowania i możliwości podopiecznych.
Studies carried out in different countries reveal dropping participation of young people in extra- school physical activity. Hypokinesia growing with age, that is abnormally diminished muscular function, is the reason for regress of physical fitness and function of children and adolescents. This report reveals results of surveys carried out in spring 2008 in selected grammar schools of Częstochowa. The sample group consisted of 200 girls and boys aged x = 18.2 ±0.68. The method of diagnostic survey was used for the study. The obtained results were examined in relation to gender and statistically verified by means of the test for two fractions. Gravity of differences was determined at three levels of value: p < 0,001, p < 0,01, p < 0,05.Results of the studies presented in this paper confirm that boys more often and more willingly than girls get involved in extra-school physical activity. In their free time, girls gladly go swimming, go on sightseeing tours, roller blade and jog. The most frequent answers among boys was cycling, swimming, team games and jogging. The investigated young people from Czestochowa most readily get involved in physical activities in company of their friends. There is an urgent need for involvement of parents and school authorities in organization of sports and recreational activities and encouraging teachers for more professional organization of physical education classes, taking into consideration individual needs, interests and abilities of their pupils.
Źródło:
Prace Naukowe Akademii im. Jana Długosza w Częstochowie. Kultura Fizyczna; 2012, 11
1895-8680
Pojawia się w:
Prace Naukowe Akademii im. Jana Długosza w Częstochowie. Kultura Fizyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka wysokości i proporcji wagowo-wzrostowych kobiet między 20 a 75 rokiem życia
Height and weight-height proportions features of women between 20-75
Autorzy:
Rodziewicz-Gruhn, J.
Powiązania:
https://bibliotekanauki.pl/articles/4818.pdf
Data publikacji:
2007
Wydawca:
Uniwersytet Humanistyczno-Przyrodniczy im. Jana Długosza w Częstochowie. Wydawnictwo Uczelniane
Opis:
The material for this paper is based on the data obtained when conducting survey studies on biocultural conditionings of menarche and menopause that were conducted by the Department of Physical Culture of Higher Teacher Education School in Częstochowa, in the years 2002-2005. In the paper, the authors have used data collected from 2500 women, from 10 to 75 years of age, living in the following provinces: Śląskie, Małopolskie, Łodzkie, Świętokrzyskie, Opolskie, Dolnośląskie, and Mazowieckie. The analysed information concerned: height, body mass, and abnormalities in body mass calculated on the grounds of BMI. The material was statistically grouped in corresponding age groups, with respect to the place of living.
Źródło:
Prace Naukowe Akademii im. Jana Długosza w Częstochowie. Kultura Fizyczna; 2007, 07
1895-8680
Pojawia się w:
Prace Naukowe Akademii im. Jana Długosza w Częstochowie. Kultura Fizyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Health and health behaviours of youth from selected city agglomerations in Ukraine, Byelorussia and Lithuania
Zdrowie i zachowania zdrowotne młodzieży z wybranych aglomeracji miejskich na Ukrainie, Białorusi i Litwie
Autorzy:
Rodziewicz-Gruhn, J.
Powiązania:
https://bibliotekanauki.pl/articles/5118.pdf
Data publikacji:
2009
Wydawca:
Uniwersytet Humanistyczno-Przyrodniczy im. Jana Długosza w Częstochowie. Wydawnictwo Uczelniane
Opis:
The questionnaire studies between 1995–2000 were conducted in varied environmental of Polish and national schools in Ukraine (Lviv and Ivanofrankovsk), Beylorussia (Grodno, Minsk) and Lithuania (Vilnius). The questionnaire was based on international questionnaire form „Health Behaviour in School – aged Children” modified by Woynarowska and co-operators [5]. The latter was used during parallel studies of Polish children and youth. 324 boys and 391 girls aged 15-17 responded for the questions.
Badania ankietowe prowadzono w latach 1995–2000 w zróżnicowanych środowiskach szkół polskich i narodowych na Ukrainie (Lwów i Iwanofrankowsk), na Białorusi (Grodno, Mińsk) i na Litwie (Wilno). Kwestionariusz ankiety wzorowano na zmodyfikowanym przez B. Woynarowską i współpacowników [5] kwestionariuszu międzynarodowym „Health Behaviour in School – aged Children” stosowanym w badaniach dzieci i młodzieży w Polsce. Na pytania ankiety odpowiadało 324 chłopców i 391 dziewcząt w wieku 15–17 lat. Analizie podano odpowiedzi dotyczące: 1. pozytywnych wskaźników zdrowia (samoocena zdrowia i sprawności fizycznej, zadowolenia z życia) i negatywnych (występowanie subiektywnych dolegliwości); 2. zachowań zdrowotnych, ze szczególnym zwróceniem uwagi na niedostatki w zakresie: aktywności fizycznej, niewłaściwych sposobów spędzania czasu wolnego, konsumpcji alkoholu, palenia papierosów. Uzyskane wyniki odniesiono do danych ogólnopolskich opracowanych pod kierunkiem B. Woynarowskiej [5].
Źródło:
Prace Naukowe Akademii im. Jana Długosza w Częstochowie. Kultura Fizyczna; 2009, 08
1895-8680
Pojawia się w:
Prace Naukowe Akademii im. Jana Długosza w Częstochowie. Kultura Fizyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ czynników społeczno-ekonomicznych na zróżnicowanie cech somatycznych i proporcji ciała u studentek pochodzących ze środowiska wiejskiego
The impact of socio-economic factors on the diversity of somatic features and body proportions of students with rural background
Autorzy:
Rodziewicz-Gruhn, J.
Powiązania:
https://bibliotekanauki.pl/articles/4834.pdf
Data publikacji:
2010
Wydawca:
Uniwersytet Humanistyczno-Przyrodniczy im. Jana Długosza w Częstochowie. Wydawnictwo Uczelniane
Opis:
Celem pracy jest ocena wpływu poziomu wykształcenia rodziców i wielkości rodziny na uzyskany w okresie dorastania poziom cech morfologicznych i zróżnicowanie proporcji ciała studentek AJD pochodzących ze środowiska wiejskiego. Badania realizowano w latach 1998–2007 wśród studentek I roku AJD (do 2004 roku WSP), które urodziły się w dekadzie 1979–1988. Ogółem zbadano 896 kobiet ze środowiska wiejskiego. Dokonano pomiarów antropometrycznych 15 cech somatycznych, następnie wyliczono następujące wskaźniki proporcji ciała: długości tułowia, barkowo-wzrostowy, biodrowo-wzrostowy, długości kończyny górnej, długości kończyny dolnej, międzykończynowy, długości tułowia, szerokości barków, biodrowo-barkowy, klatki piersiowej, BMI, Queteleta, Rohrera, smukłości, obwodu klatki piersiowej Pigneta II, tęgości Škerljia. Materiał opracowano statystycznie. Zróżnicowanie środowiskowe analizowanych cech somatycznych przedstawiono graficznie w postaci wartości unormowanych na średnią i odchylenia standardowego ogółu badanych kobiet. Z przeprowadzonej analizy wynika, że poziom wykształcenia rodziców i dzietność w niewielkim stopniu różnicują analizowane cechy i wskaźniki proporcji ciała badanych studentek AJD w Częstochowie, pochodzących ze środowiska wiejskiego.
The objective of the study is to evaluate the effect of the educational status of parents and family size on the level of morphological traits achieved in the adolescence period as well as on differentiated body proportions of female students of Jan Długosz University (JDU) in Częstochowa originating from rural environment. The study was conducted in the years 1998–2007 amongst I year female students of Jan Długosz University in Częstochowa (until 2004 – the Higher Pedagogical School), who were born in the decade of 1979–1988. In total, the survey covered 896 women from rural areas and involved: anthropometric measurements of 15 somatic traits, and calculations of the following body proportion indices: trunk length index, shoulder-height index, hip-height index, upper extremity length index, lower extremity length index, inter-extremities index, shoulder width index, hip-to-shoulder index, chest index, BMI, Quetelet index, Rohrer index, slenderness index, Pignet II index of chest circumference, and Škerlji obesity index. Results obtained were elaborated statistically. The environmental diversity of the analyzed somatic traits was illustrated graphically in the form of values standardized into mean values and standard deviation of the whole population of women examined. Analyses conducted in the study demonstrated that the educational status of parents and the number of children in a family differentiated the analyzed traits and body proportion indices of the female students of JDU in Częstochowa originating from rural areas only to a little extent.
Źródło:
Prace Naukowe Akademii im. Jana Długosza w Częstochowie. Kultura Fizyczna; 2010, 09
1895-8680
Pojawia się w:
Prace Naukowe Akademii im. Jana Długosza w Częstochowie. Kultura Fizyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie kiszonki z kukurydzy Zea Mays L. do usuwania barwników z roztworów wodnych
Application of Maize Silage as a Biosorbent for the Removal of Dyes from Aqueous Solutions
Autorzy:
Filipkowska, U.
Jóźwiak, T.
Rodziewicz, J.
Kuciejewska, J.
Powiązania:
https://bibliotekanauki.pl/articles/1819174.pdf
Data publikacji:
2013
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
roztwory wodne
usuwanie barwników
ow-cost adsorbent
adsorption
biosorption
chitosan
sawdust
biomass
chitin
waste
Opis:
The aim of this study was to determine the effectiveness of synthetic dyes removal from aqueous solutions with the use of silage from common maize Zea mays L. as a biosorbent. Two dyes were used as adsorbates: cationic Basic Violet 10 (BV10) and anionic Reactive Black 5 (RB5). The silage from common maize Zea mays L. originated from the Department of Agrotechnology and Plant Production Management, University of Warmia and Mazury in Olsztyn. Before experiments, the silage was dried at a temp. of 60°C for 12 h and then sieved through a sieve with mesh diameter of 0.25 mm. The scope of analyses included determinations of: the effect of biosorbent dose on the course of adsorption process, optimal time of dyes adsorption, and correlation between type of dye and effectiveness of the adsorption process. The effectiveness of RB5 and BV10 adsorption from aqueous solutions onto silage was analyzed based on a correlation between the quantity of adsorbed dye Q (mg/g d.m.), and its equilibrium concentration C (mg/dm3). Results obtained were analyzed with the use of four sorption isotherms: Freundlich, Langmuir, double Langmuir, and Redlich-Peterson. Poorer fit of experimental results to the model was achieved only in the case of Freundlich isotherm. The remaining three models were very well describing the results. Owing to the presence of negative functional groups like e.g. –COOH and –OH in silage, it has a negative charge in aqueous solutions. This has a beneficial impact on the effectiveness of sorption of positively-charged cationic dyes. In turn, electrostatic repulsion of a negatively-charged surface of a biosorbent and anionic dyes exerts a negative effect on sorption effectiveness. The maximum sorption capacity of silage determined for the cationic dye BV10 was ca. 180 mg/g d.m. and was significantly higher than the sorption capacity assayed for the anionic dye RB5 - ca. 80 mg/g d.m. In comparing the achieved results for the sorption of the analyzed dyes RB5 and BV10 onto maize silage with the effectiveness of dyes sorption on other biosorbents, it may be concluded that the waste maize silage displays very good sorption properties and may be successively applied for dye removal.
Źródło:
Rocznik Ochrona Środowiska; 2013, Tom 15, cz. 3; 2324-2338
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wspomaganie denitryfikacji w czterostopniowym biologicznym złożu obrotowym
Denitrification process enhancing in four-stages rotating biological contactor
Autorzy:
Mielcarek, A.
Rodziewicz, J.
Janczukowicz, W.
Wolter, A.
Powiązania:
https://bibliotekanauki.pl/articles/399584.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
rotating biological contactor
denitrification
external organic carbon source
acetic acid
biologiczne złoże obrotowe
denitryfikacja
zewnętrzne źródło węgla organicznego
kwas octowy
Opis:
Celem badań było określenie stopnia wykorzystania substratu organicznego w procesie denitryfikacji z udziałem błony biologicznej w laboratoryjnym modelu czterostopniowego biologicznego złoża obrotowego. Zanurzenie tarcz wynosiło 40%. Jako substrat organiczny zastosowano kwas octowy, wprowadzany do czwartego (ostatniego) stopnia złoża. Obserwowano wykorzystanie substratu dla 2 i 24h. Dla krótszego czasu zanotowano usunięcie 37,9±1,8 mgN·m-2 przy jednoczesnym wykorzystaniu 499,9±33,2 mgO2·m-2 związków organicznych. Wydłużenie czasu gwarantowało wyższą efektywność denitryfikacji. Stosunek wykorzystanego substratu organicznego do ilości usuniętego azotu wynosił 13:1 i 21:1 odpowiednio dla 2 i 24h.
The aim of the study was to determine the degree of an organic substrate consumption in the denitrification process involving a biofilm in four-stages laboratory scale rotating biological contactor (RBC). The discs submergence was 40% of their diameter. Acetic acid, used as external carbon source, was fed to the fourth stage of RBC. Consumption of substrate was observed for 2 and 24 hours. For a shorter period there was the removal of 37.9 ± 1.8 mgN · m-2, while using 499,9 ± 33.2 mg O2 · m-2 of organic compounds. The prolongation of the experiment duration guaranteed higher efficiency of denitrification. The ratio of organic substrate used to the amount of nitrogen removed was 13: 1 and 21: 1 for 2 and 24 hours respectively.
Źródło:
Inżynieria Ekologiczna; 2016, 48; 161-165
2081-139X
2392-0629
Pojawia się w:
Inżynieria Ekologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ prądu elektrycznego na procesy nitryfikacji i denitryfikacji na czterostopniowym złożu tarczowym
Effect of electric current flow on nitrification and denitrification processes in a four-stage rotating biological contactor
Autorzy:
Rodziewicz, J.
Filipkowska, U.
Janczukowicz, W.
Kłodowska, I.
Powiązania:
https://bibliotekanauki.pl/articles/401001.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
biologiczne złoże tarczowe
elektroliza
nitryfikacja
denitryfikacja
rotating biological contactor
electrolysis
nitrification
denitrification
Opis:
Konieczność zwiększania skuteczności procesów usuwania związków azotu ze ścieków prowadzi do opracowywania nowych metod biologicznych lub poprawy efektywności już stosowanych rozwiązań technicznych. Proces ten dotyczy także biologicznych złóż obrotowych, które w ostatnich latach zaczęły odgrywać znaczącą rolę w małych i średnich oczyszczalniach do oczyszczania ścieków przemysłowych i bytowo-gospodarczych. Kierunek zmian dotyczy m.in.: wprowadzania nowych konstrukcji wypełnień, stosowania różnych napędów wprawiających materiał wypełniający w ruch obrotowy, wydłużania czasu retencji ścieków w komorze, różnych technik dostarczania ścieków do reaktora, prowadzenia biodegradacji zanieczyszczeń z procesami elektrochemicznymi oraz współpracy złóż biologicznych z metodą osadu czynnego. W niniejszej pracy przedstawione zostały badania prowadzone w skali ułamkowo-technicznej na elektro-biologicznym złożu tarczowym pracującym w układzie czterostopniowym w warunkach przepływu prądu elektrycznego o gęstości: 4,2 mAm-2. Katodą były tarcze ze stali nierdzewnej z unieruchomioną błoną biologiczną, natomiast anodą - elektroda aluminiowa zamontowana w zbiorniku przepływowym złoża. Równolegle prowadzone były badania na czterostopniowym złożu tarczowym w warunkach konwencjonalnych (gdy nie przepływał prąd elektryczny), w którym czwarty stopień, w celu prowadzenia procesu denitryfikacji, był hermetycznie przykryty. Badania nie wykazały wpływu przepływu prądu elektrycznego na sprawność utleniania związków azotu. Na elektro-biologicznym złożu tarczowym uzyskano ponad 97% sprawność nitryfikacji i niewiele niższą w warunkach konwencjonalnych - około 96%. Stwierdzono natomiast, na podstawie przeprowadzonej analizy wariancji, przy użyciu testu nieparametrycznego Friedmana, wpływ przepływu prądu elektrycznego na efektywność denitryfikacji. W warunkach przepływu prądu elektrycznego obserwowano ponad 41% sprawność procesu redukcji związków azotu utlenionych w procesie nitryfikacji. W warunkach konwencjonalnych obserwowano 35% efektywność denitry-fikacji.
The necessity of enhancing the effectiveness of nitrogen compounds removal from wastewaters leads to the elaboration of novel biological methods or to the improvement of effectiveness of the already exploited technical solutions. This refers also to rotating biological contactors (RBCs) which in recent years have begun to play a key role in small- and medium-size treatment plants for the treatment of industrial and domestic sewages. Changes proceeding in this respect involve: introduction of new constructions of fillings, application of different drivers putting the filling material into rotary motion, extension of the time of sewages retention in the reactor, application of different technologies of wastewater discharge to the reactor, electrochemically-aided biodegradation of contaminants, and cooperation of biofilters with the method of activated sludge. This work presents a study conducted in a fractional-technical scale on a rotating electro-biological contactor operating in a four-stage system under conditions of the flow of electric current with a density of 4.2 mAm-2. In the RBC unit, stainless steel disks with immobilized biofilm served as a cathode, whereas an aluminum electrode fixed in the flow tank of the contactor - as an anode. Parallel experiment was conducted on the four-stage RBC under conventional conditions (without the flow of electric current), in which the fourth stage was hermetically closed to enable the denitri-fication process.The study did not demonstrate the electric current flow to affect the effectiveness of nitrogen compounds oxidation. The effectiveness of denitrification achieved on the rotating electro-biological contractor accounted for 97%, whereas that obtained under conventional conditions was only negligibly lower and reached ca. 96%. In turn, the analysis of variance conducted with the Friedman's non-parametric test demonstrated the effectiveness of denitrification to be affected by electric current flow. Under conditions of electric current flow, the effectiveness of the reduction of nitrogen compounds oxidised during nitrification reached over 41%, as compared to 34% achieved under conventional conditions.
Źródło:
Inżynieria Ekologiczna; 2011, 24; 120-129
2081-139X
2392-0629
Pojawia się w:
Inżynieria Ekologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adsorpcja barwników z roztworów wodnych na popiołach
Adsorption of dyes from aqueous solutions on ashes
Autorzy:
Filipkowska, U.
Janczukowicz, W.
Rodziewicz, J.
Szmit, R.
Powiązania:
https://bibliotekanauki.pl/articles/1819523.pdf
Data publikacji:
2011
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
barwnik
popiół
roztwór wodny
aqueous solution
ash
dye
Opis:
Celem niniejszej pracy było określenie efektywności adsorpcji barwników anionowych i kationowych z roztworów wodnych na popiołach pochodzących, z dwóch różnych źródeł: ze spalania osadów ściekowych w Grupowej Oczyszczalni Ścieków "Dębogórze" w Gdyni i ze spalania węgla kamiennego w Olsztyńskiej Elektrowni Ciepłowniczej (OZOS). Jako adsorbaty zastosowane zostały barwniki rozpuszczalne w wodzie: z wytworzeniem barwnego kationu - Basic Green 4 (barwnik zasadowy) oraz z wytworzeniem barwnego anionu - Reactive Black 5 (barwnik helaktynowy winylosulfonylowy.
This study was conducted with water-soluble dyes used as sorbates: with the formation of color cation - Basic Green 4 (basic dye) and with the formation of color anion - Reactive Black 5 (helactine vinyl sulfone dye). Its objective was to investigate possibilities of dyes adsorption from aqueous solutions on ashes. The scope of the study included a comparison of adsorption effective-ness of two dyes originating from the textile industry: Reactive Black 5 (RB5) and Basic Green 4 (BG4) by fly ashes of two different origins: from coal combustion at the Olsztyn Thermal Power Station (OZOS), from combustion of sewage sludge originating from Group Wastewater Treatment Plant "Dębogórze" in Gdynia. Results achieved in the study demonstrated that the effectiveness of the adsorption process was determined by the type of dye and adsorbent as well as by pH value of the aqueous solution. In the case of the anionic dye RB 5, the increase in pH was accompanied by diminishing adsorption effectiveness, whereas an opposite tendency was observed in the case of the cationic dye BG4 when the increase in pH value resulted in enhanced dye removal. The fly ashes applied in the research, both from the Thermal Power Station OZOS and from combustion of activated sludge, were characterized by a high effectiveness of cationic dye removal. In the case of the cationic dye BG 4, the highest adsorption capacity (b) accounting for 500.5 mg/g was achieved on fly ashes from the Thermal Power Station at pH = 9.0. In turn, the effectiveness of anionic dye RB 5 removal on both sorbents was at a similar, considerably lower level (0.6÷4%). In the case of this dye, the highest adsorption capacity (b) reaching 6 mg/g d.m. was achieved on ashes from the sludge at pH 3.0, whereas the lowest one ? 0.1 mg/g d.m. - at pH 9.0 on fly ashes from the Thermal Power Station.
Źródło:
Rocznik Ochrona Środowiska; 2011, Tom 13; 1173-1184
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efficiency of reactive Orange 16 dye removal by ozonation
Efektywność usuwania barwnika reaktywnego Orange 16 w procesie ozonowania
Autorzy:
Filipkowska, U.
Rodziewicz, J.
Krzemieniewski, M.
Dłuska, E.
Powiązania:
https://bibliotekanauki.pl/articles/1825955.pdf
Data publikacji:
2008
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
barwniki
ozonowanie
odbarwianie ścieków
barwnik Orange 16
ozonowanie barwników
Opis:
Mechanizm odbarwiania roztworów wodnych przez ozonu polega na wiązania nienasyconych barwników, która prowadzi do tworzenia ozonidów ulegających gwałtownej hydrolizie, powodującej rozpad cząsteczek. Ozon chętnie reaguje z grupami karboksylowymi i azowymi, a wolniej z grupami nitrowymi. Odbarwianie ścieków przy zastosowaniu ozonu jest określone przez: jego dawkę, temperaturę roztworu, czas reakcji i pH roztworu. Ozonowanie mające na celu usunięcie barwników z wody, jest krótkim (tańszym) i wysoce efektywnym procesem. Ozonowanie barwników jest obiecującym procesem, ponieważ ozon jest bezpieczniejszy niż nadtlenek wodoru lub inne odczynniki oraz ozon nie wywołuje powstawania osadów chemicznych. Kluczowym faktem jest to, że końcowe produkty ozonowania nie są toksyczne i są konwertowane do CO2 i H2O w zależności od warunków [6]. W artykule przedstawiono badania mające na celu usunięcie barwnika reaktywnego Orange 16 z roztworu wodnego przy zastosowaniu ozonu. Badania obejmowały określenie wpływu stężenia barwnika w roztworze oraz dawki ozonu na skuteczności procesu ozonowania. Ponadto wyznaczono stałe szybkości reakcji dla różnych stężeń barwnika w roztworze i różnych dawkach ozonu. Badania prowadzono w reaktorze o objętości 1 dm3, zawierającego roztwór barwnika w odpowiednim stężeniu (50, 100 lub 200 mgź dm-3). Ozon był dostarczany do reaktora w pięciu dawkach: 8, 16, 24, 32 i 40 g O3ź m-3. Przeprowadzono piętnaście serii badań. Kilka próbek było pobieranych w regularnych odstępach czasu (5 min). W każdej z serii badań, analizy prowadzono do momentu ustabilizowania się stężenia barwnika. Sprawności procesu określono przez monitorowanie odbarwiania. Stężenie barwnika mierzono spektrofotometrycznie używając spektrofotometru UV-VIS SP 3000. Badania wykazały, że zarówno dawka doprowadzonego ozonu jak i stężenie barwnika w roztworze wpływały na szybkość procesu usuwania barwy. Wzrost dawki ozonu powodował wzrost stałej szybkości reakcji dla każdego testowanego stężenia barwnika. Przy stałej dawce ozonu stałe szybkości reakcji obniżały się wraz ze wzrostem stężenia barwnika w roztworze
Źródło:
Rocznik Ochrona Środowiska; 2008, Tom 10; 47-56
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka ścieków z zakładu utylizacji odpadów pochodzenia zwierzęcego
Characteristics of wastewater from animal rendering plant
Autorzy:
Rodziewicz, J.
Mielcarek, A.
Bryszewski, K.
Janczukowicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/296865.pdf
Data publikacji:
2017
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
slaughterhouse waste
rendering plants
wastewater quality
wastewater treatment
odpady poubojowe
zakład utylizacyjny
charakterystyka jakościowa ścieków
oczyszczanie ścieków
Opis:
In this study, wastewater originating from a post-slaughter waste management plant, the main activity of which is the recovery of other than hazardous wastes of animal origin and wastes from the agri-food processing, were analyzed. The main substrates processed in the installation include post-slaughter wastes and wastes from the agri-food processing, like e.g.: waste animal tissue, raw materials and products unsuitable for consumption and processing originating from the food, dairy, bakery and confectionery industries, sludge from the onsite wastewater treatment plant, unusable dietary fats, cooking oils and fats, and biodegradable kitchen waste. The above-mentioned wastes are recovered and processed into meat-bone meal, blood meal, feather meal as well as technical fat. The wastewater was characterized by a high concentration of organic matter (COD from 20 345 to 66 260 mg O2/dm3), total suspended solids (from 1068 to 4336 mg/dm3), and fats (from 1186 to 2244 mg/dm3). Phosphorus concentration in raw wastewater ranged from 75 to 230 mg P/dm3, that of total nitrogen from 496 to 910 mg N/dm3, and that of ammonia nitrogen from 450 to 846 mg N/dm3. The process line of the onsite wastewater treatment plant included: rotary screen, floatation-flocculation station (agents and procedures aiding the process: PIX coagulant, pH adjustment with soda lye, polyelectrolyte), aerobic bioreactor, and ultrafiltration station. The excess sludge from the bioreactor is dewatered on a filtration press and collected by an external company as a waste product. Removal effectiveness reached 99.7% for organic matter, 98.5% for total phosphorus, 95.2% for total nitrogen, 98.5% for ammonia nitrogen, and 98.9% for suspended solids. The total effectiveness of the first two stages of the treatment process (screening on rotary screens and wastewater treatment via floatation and flocculation) exceeded 50% in the case of most of the contaminants (except for total nitrogen with effectiveness accounting for 46%). The highest total effectiveness of the first two stages of the treatment process, reaching over 90%, was noted in the case of fats. Concentrations of contaminants in the treated wastewater did not exceed the permissible values, stipulated in the integrated permit.
Celem pracy była charakterystyka ścieków pochodzących z zakładu utylizacji odpadów poubojowych oraz ścieków po kolejnych etapach oczyszczania. W skład ciągu technologicznego oczyszczalni wchodzi sito obrotowe, stacja flotacyjno-flokulacyjna, tlenowy reaktor biologiczny i stacja ultrafiltracji. Badania wykonano w latach 2015-2016. Próbki pobrano siedmiokrotnie - trzy w roku 2015 i cztery w 2016 (maj, czerwiec). Ścieki charakteryzowały się wysokim stężeniem związków organicznych wyrażonych ChZT (od 20 345 do 66 260 mg O2/dm3), zawiesin ogólnych (od 1068 do 4336 mg/dm3), tłuszczów (od 1186 do 2244 mg/dm3). Równocześnie stężenie fosforu ogólnego w ściekach surowych wynosiło od 75 do 230 mg P/dm3, azotu ogólnego od 496 do 910 mg N/dm3, a stężenie azotu amonowego od 450 do 846 mg N/dm3. Związki organiczne usuwane były ze sprawnością 99,7%, fosfor ogólny - 98,5%, azot ogólny - 95,2%, azot amonowy - 98,5% i zawiesiny - 98,9%. Sumaryczna efektywność w dwóch pierwszych etapach oczyszczania na sitach obrotowych oraz w procesie flotacji i flokulacji w większości przypadków była wyższa od 50% (wyjątek stanowił azot ogólny). Stężenia wskaźników zanieczyszczeń w ściekach oczyszczonych nie przekraczały wartości dopuszczalnych, określonych w pozwoleniu zintegrowanym.
Źródło:
Inżynieria i Ochrona Środowiska; 2017, 20, 3; 359-370
1505-3695
2391-7253
Pojawia się w:
Inżynieria i Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ procesu filtracji na relację między ilością substancji organicznych i związków biogennych w ściekach mleczarskich
The influence of the filtration process on the content of organic compounds in relation to the concentration of nutrients in dairy wastewater
Autorzy:
Ostrowska, K.
Janczukowicz, W.
Rodziewicz, J.
Mielcarek, A.
Powiązania:
https://bibliotekanauki.pl/articles/1819041.pdf
Data publikacji:
2013
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
proces filtracji
ilość substancji
volatile fatty acids
biological phosphorus removal
sequencing batch reactors
denitrification
wastewaters
fermentation
systems
Opis:
Nowadays, high effective carbon, nitrogen and phosphorus removal based on activated sludge is the most popular method of dairy wastewater treatment. In activated sludge systems efficient nutrient compounds removal is determined by the quantity and quality of easily available forms of organic carbon. For both biological phosphorus removal and biological nitrogen removal to occur, an easily biodegradable carbon source must be present in the treating wastewater. The organic compounds used in the processes of denitrification and enhanced biological phosphorus removal (EBPR) usually are presented in treating wastewater, what is called an internal source of carbon. However, many industrial wastewater, including dairy wastewater, very often do not have sufficient amounts of carbon, in relation to the concentration of nitrate and phosphates, to ensure efficient both denitrification and biological dephosphatation processes. When biological nitrogen and phosphorus removal is limited by the availability of easily biodegradable forms of organic carbon a supplemental carbon source must be add to the wastewater, hence so-called external source of carbon should be applied to provide energy necessary for the nutrient removing bacteria to grow and perform their work. One of the most popular sources of organic carbon is acetic acid, which is one of the best available forms of carbon by denitrifying bacteria and those accumulating polyphosphates (PAO). Apart from acetic acid and acetates use is made of a number of the volatile fatty acids (VFA), including propionic acid, butyric acid, valeric acid, and such substrates as: glucose, methanol or ethanol. Since the use of chemical compounds in the form of technical products (e.g. acetic acid, citric acid) is generally expensive, cost-saving solutions are sought. According to literature data, wastewater with high COD/(N + P) ratio after acidogenic fermentation can be used as an external source of VFA in wastewater with low concentrations of easily available organic compounds treatment. The aim of this study was to determine the influence of the filtration process on the content of organic compounds (measured as COD) in relation to the concentration of nutrients (measured as the sum of TKN and TP) in process dairy wastewater, in terms of the possibility of effective VFA production. It was observed, that filtration process ensures improvement of the COD/(N + P) ratio only in wastewater from the selected sections of dairy production. The best result, if percentage increase of the COD/(N + P) ratio is considered, was obtained for the wastewater from butter production. Densification of wastewater from butter production resulted in 95% increase of the COD/(N + P) ratio without a significant increased nutrient concentration. Filtration process provided the highest COD/(N + P) ratio (219,18 mg O2/(mg N + mg P)) and reduced both nitrogen and phosphorus concentrations in the permeate from the apparatus room. The results obtained suggest, that acidogenic fermentation of wastewater from the apparatus room and butter production with high COD/(N + P) ratio can serve as an external source of VFA in biological wastewater treatment process of wastewater with low concentrations of easily available organic compounds, which ensures effective nitrogen and phosphorus removal.
Źródło:
Rocznik Ochrona Środowiska; 2013, Tom 15, cz. 2; 1411-1425
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ procesu elektrochemicznego na stężenie azotu ogólnego i ortofosforanów w odpływie z reaktora z unieruchomioną błoną biologiczną
Effect of Electrochemical Process on the Concentration of Total Nitrogen and Orthophosphates in the Outflow from the Reactor with Immobilized Biofilm
Autorzy:
Kłodowska, I.
Rodziewicz, J.
Janczukowicz, W.
Filipkowska, U.
Powiązania:
https://bibliotekanauki.pl/articles/1819098.pdf
Data publikacji:
2013
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
proces elektrochemiczny
błona biologiczna
wastewater
aluminum electrodes
contaminated water
drinking water
electrocoagulation
removal
nitrate
denitrification
technologies
wastewaters
Opis:
Municipal and industrial wastewaters discharged to water reservoirs should be characterized by a low load of nutrients. Nitrogen and phosphorus are responsible for eutrophication, is therefore necessary to find the effective solutions for their removal. The experiment has been carried in order to determine the impact of the electric current density on the course of simultaneous electrocoagulation and hydrogenotrophic denitrification in the rotating electro-biological contactor (REBC).The study was conducted in the laboratory scale, parallely in three anaerobic reactors, in conditions of the flow electric current. In the REBC unit, rotating disks made of stainless steel with immobilized biofilm were the cathode. Hydrogen donor produced on the surface of cathode, in water electrolysis process, was used by denitrifying bacteria for nitrates reduction. As the anode an aluminum electrode mounted in the reactors was used. As a result of the anode electrolytic dissolution releasing Al3+ ions combined with the hydroxyl ions emitted on the cathode, formed metal hydroxides, which functioned as a coagulant in the binding of phosphate ions. In crude wastewaters inflowing to the bioreactors the concentration of orthophosphates was 8.1 mgPO4×dm-3 and total nitrogen 81.36 mg Nog×dm-3 and the concentration of organic compounds was equal 40.52 mg O2×dm-3 . The study showed that regardless the operating parameter of the electrolysis process, effluent concentration of orthophosphate below 1 mg PO4×dm-3 was obtained. However, the lowest concentration were observed at a density 0.05 mA×cm-2 . The efficiency of 97.27% corresponded to the phosphate concentration equal 0.22 mg PO4×dm-3. The increase of electric current density resulted in a higher concentration of orthophosphate in the effluent from the reactors, because of more intensive dissolution of aluminum hydroxide with the increase of wastewater alkalinity and a limited amount of secreted Al3+ ions, as a result of aluminum oxide accumulation on the anode surface. In the same time, electrolytically-aided denitrification process affected the reducing concentration of total nitrogen in the wastewaters with the increase of electric current density, as a result of intensive use a hydrogen donor by denitrifying bacteria. The lowest concentration of total nitrogen in the treated wastewaters was achieved at the highest current density 0.1 mA cm-2 – 16.15 mgNog dm-3 , which corresponded to 80.15% effectiveness. The research has shown that bio-electrochemical reactor may be an alternative solution for reactors with suspended biomass designed for nutrients removal.
Źródło:
Rocznik Ochrona Środowiska; 2013, Tom 15, cz. 2; 1952-1964
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ odprowadzania odpadów żywnościowych do miejskiej sieci kanalizacyjnej na stężenie CHZT ścieków komunalnych w Olsztynie
The impact of food waste discharge into the municipal sewerage on cod concentration in urban wastewater in Olsztyn
Autorzy:
Janczukowicz, W.
Rodziewicz, J.
Mielcarek, A.
Wolter, A.
Powiązania:
https://bibliotekanauki.pl/articles/400206.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
odpady gastronomiczne
młynki koloidalne
ChZT ścieków komunalnych
RLM
food waste
colloid mills
municipal wastewater COD
PE
Opis:
Operatorzy oczyszczalni w Polsce od kilkunastu lat obserwują wzrost stężenia zanieczyszczeń ścieków surowych, zwłaszcza w odniesieniu do substancji organicznych. To efekt ograniczenia zużycia wody, renowacji sieci, wzrostu zamożności społeczeństwa, powszechnego marnotrawstwa żywności. Najpoważniejszym działaniem wpływającym na skład ścieków miejskich jest stosowanie w obiektach gastronomicznych młynków koloidalnych i odprowadzanie do kanalizacji rozdrobnionych odpadów żywnościowych. To nagminne zachowanie zostało zauważone i zanegowane w 2010 roku we wspólnym stanowisku GIS i MŚ. Zdecydowanie za późno, co potwierdza sytuacja zaobserwowana w olsztyńskiej oczyszczalni ścieków, gdzie największy skok wartości ChZT zaobserwowano w latach 2008–2010. Średnie stężenie ChZT ścieków w latach 2011–2014 było prawie dwukrotnie wyższe niż w roku 1996 a RLM rzeczywiste jest bliskie wartości projektowej, pomimo tego, że obciążenie hydrauliczne obiektu nieznacznie przekroczyło 50% wartości obliczeniowej. Usuwanie tak dużych ładunków zanieczyszczeń organicznych generuje wysokie koszty, których można by uniknąć zagospodarowując racjonalnie odpady gastronomiczne.
The operators of wastewater treatment plants in Poland have been observing an increase in the concentration of raw sewage for several years. In particular for organic substances. This is the effect of water consumption reduction, restoration of the sewerage networks, growing wealth, widespread waste of food. The most serious adverse, influencing on the municipal wastewater composition is colloid mills application in gastronomical objects and the discharge of shredded food waste to sewer. That widespread behavior has been noticed and negated, in 2010 year, by the common position of GIS and the ME. Far too late, which confirms the situation observed at the Olsztyn wastewater treatment plant, where the biggest increase of COD values was observed in 2008–2010. The average concentration of COD of sewage in the period 2011–2014 was almost twice higher than in 1996, real PE is close to the design value, despite the fact that the hydraulic load of the object slightly exceeded 50% of design value. Removing such large organic pollutant loads generates high costs, that could be avoided by reasonable food waste management.
Źródło:
Inżynieria Ekologiczna; 2016, 47; 68-73
2081-139X
2392-0629
Pojawia się w:
Inżynieria Ekologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efektywność adsorpcji barwników zasadowych na bentonicie
Effectiveness of basic dyes adsorption on bentonite
Autorzy:
Filipkowska, U.
Janczukowicz, W.
Rodziewicz, J.
Jopp, E.
Powiązania:
https://bibliotekanauki.pl/articles/401032.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
bentonit
barwniki zasadowe
BG 4
BV 10
adsorpcja
bentonite
basic dyes
adsorption
Opis:
Adsorpcja jest jedną z najefektywniejszych metod usuwania barwników z roztworów wodnych. Skuteczność adsorpcji uzależniona jest głównie od doboru odpowiedniego adsorbentu oraz warunków w jakich prowadzony jest proces. Coraz częściej do procesów adsorpcji poszukuje się efektywnych, nisko kosztownych adsorbentów pochodzenia naturalnego. Szczególną uwagę zwraca się na niekonwencjonalne adsorbenty tj. naturalne materiały, biosorbenty a także materiały odpadowe z przemysłu czy rolnictwa. Celem pracy było określenie efektywności usuwania barwników zasadowych z roztworów wodnych przy wykorzystaniu procesu adsorpcji. W badaniach jako adsorbent użyty został bentonit. Wykorzystano dwa adsorbaty, którymi były barwniki zasadowe - Basic Green 4 i Basic Violet 10. Badania wykazały możliwość zastosowania bentonitu jako adsorbentu dla barwników zasadowych Basic Green 4 i Basic Violet 10 z roztworów wodnych. Na podstawie przeprowadzonych badań można stwierdzić, że efektywność procesu adsorpcji na bentonicie zależała od wpływu odczynu roztworu na wartość maksymalnej pojemności adsorpcyjnej oraz od stężenia adsorbentu. Lepsze efekty usuwania barwników BG 4 i BV 10 z roztworów wodnych uzyskano dla stężenia adsorbentu równego 1 g/dm3. Badania wykazały również wyraźny wpływ odczynu na ilość usuniętego barwnika. Wzrost odczynu roztworu w przypadku obu testowanych barwników powodował zwiększenie pojemności adsorpcyjnej. Niezależnie od rodzaju testowanego barwnika i ilości adsorbentu w próbie najwyższą pojemność adsorpcyjna testowanych barwników zasadowych z roztworów wodnych uzyskano przy pH 9.0. Wyznaczoną z równania Langmuira najwyższą pojemność adsorpcyjną spośród dwóch testowanych barwników, uzyskano dla stężenia adsorbentu równego 1 g/dm3, w procesie prowadzonym przy pH 9.0. W przypadku obu testowanych barwników BG 4 i BV 10 była ona zbliżona i wyniosła odpowiednio: 508 mg/g s.m.; 519 mg/g s.m. Najniższą pojemności adsorpcyjną uzyskano dla barwnika BV 10, podczas adsorpcji przy stężeniu bentonitu równym 10 g/dm3, przy pH 3.0 - 19 mg/g s.m. Wartości powinowactwa adsorpcyjnego dla bentonitu wahały się w zakresie 0,45 - 0,85 dm3/g s.m. dla barwnika Basic Green 4 oraz 0,15 - 0,7 dla barwnika Basic Violet 10.
Adsorption is one of the most effective methods for the removal of dyes from aqueous solutions. Its effectiveness is chiefly determined by the selection of an appropriate adsorbent and conditions the process is run at. Effective and inexpensive adsorbents of natural origin to be used in the adsorption process are therefore increasingly often sought after. Special attention is devoted to unconventional adsorbents, i.e. natural materials, biosorbents as well as waste products of the industry or agriculture. The aim of this study was to determine the effectiveness of basic dyes removal from aqueous solutions by means of the adsorption process. The adsorbent used in the study was bentonite, whereas basic dyes - Basic Green 4 and Basic Violet 10W, served as adsorbates.The study demonstrated the feasibility of applying bentonite as an adsorbent for basic dyes Basic Green 4 and Basic Violet 10 from aqueous solutions. Based on the conducted experiment, it may be concluded that the effectiveness of the adsorption process on bentonite depended on the effect of solution pH on the value of the maximum adsorption capacity and on adsorbent concentration. Better results of BG 4 and BV 10 dyes removal from aqueous solution were achieved at adsorbent con-centration of 1 g/dm3. The research showed also a tangible effect of solution pH value on the quantity of dye removed. An increasing pH value of the solution caused an increase in the adsorption capacity in the case of both analyzed dyes. Irrespective of the type of dye examined and adsorbent concentration, the highest adsorption capacity of the basic dyes from aqueous solutions was reached at pH 9.0. The highest adsorption capacity determined for the two analyzed dyes from the Langmuir's equation was achieved at adsorbent concentration of 1 g/dm3, in the process run at pH 9.0. It was alike in the case of both dyes, i.e. BG 4 and BV 10, and accounted for: 508 mg/g d.m. and 519 mg/g d.m., respectively. In contrast, the lowest adsorption capacity - 19 mg/g d.m. - was recorded for the BV dye during adsorption at bentonite concentration of 10 g/dm3 and pH 3.0. Values of adsorption affinity noted for bentonite were ranging from 0.45 to 0.85 dm3/g d.m. for Basic Green 4 dye as well as from 0.15 to 0.7 dm3/g d.m. for Basic Violet 10 dye.
Źródło:
Inżynieria Ekologiczna; 2011, 24; 243-253
2081-139X
2392-0629
Pojawia się w:
Inżynieria Ekologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Acetic Acid on Denitrification and Dephosphatation Process Efficiencies in Sequencing Batch Biofilm Reactor
Autorzy:
Mielcarek, A.
Rodziewicz, J.
Janczukowicz, W.
Bryszewski, K.
Powiązania:
https://bibliotekanauki.pl/articles/123858.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
Sequencing Batch Biofilm Reactor
denitrification
dephosphatation
acetic acid
Opis:
This study investigates the feasibility of using an organic substrate in the form of acetic acid to enable wastewater denitrification in a Sequencing Batch Biofilm Reactor (SBBR). The impact of nitrates presence on the yield of biological dephosphatation was determined as well. The experiment included 296 cycles and was divided into 4 series differing in the load of nitrates. The N:(C and P) ratios were: 7:(140 and 7); 35:(140 and 7); 70:(140 and 7) and 140:(140 and 7). The hydraulic retention time in the reactor was 12h (6h of mixing – dissolved oxygen concentration below 0.1 and 6h of aeration – concentration of dissolved oxygen 3.0±0.8 mgO2·dm-3). The study demonstrated that the 30-day adaptation period (60 cycles) was sufficient for the development of a stable biofilm. The C:N ratio of 2 ensured the total nitrogen concentration in the effluent below 1 mgN·dm-3. The mean efficiency of biological dephosphatation reached 7.0, 17.4, 18.7, and 30.3% in series 1–4, respectively. In the case of series 2 and 3, no significant differences were demonstrated in the total phosphorus concentration in the effluent. In the other series, the differences turned out to be significant.
Źródło:
Journal of Ecological Engineering; 2018, 19, 4; 176-180
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ stałego pola magnetycznego na przemiany związków azotu w biologicznym złożu tarczowym
Impact of a Static Magnetic Field on Nitrogen Compounds Transformations in a Rotating Biological Contactor
Autorzy:
Rodziewicz, J.
Filipkowska, U.
Janczukowicz, W.
Kłodowska, I.
Prażmo, M.
Powiązania:
https://bibliotekanauki.pl/articles/1819013.pdf
Data publikacji:
2013
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
pole magnetyczne
przemiany związków azotu
electrolytically-aided denitrification
ammonium-rich leachate
wastewater treatment
aerobic rbc biofilm
simultaneous carbon
activated sludge
removal
wastewaters
enhancement
reactor
magnetic field
Opis:
The processes of nitrification and denitrification are the most common and well-known methods of biological nitrogen removal from wastewater. Nitrifying bacteria are characterized by a low growth rate, a tendency to wash out from the reactors, which means that nitrification is the limiting factor in the course of the nitrogen compounds removal process. Therefore, it is necessary to keep a large amount of nitrifying biomass in reactors in order to ensure the proper level of nitrification efficiency. Previously performed researches have shown that the magnetic field can affect the growth of microorganisms and their ability to biodegrade contaminants. Application of a magnetic field enhances microbial activity, accelerates degradation of organic compounds and increases nitrification rate. Otherwise the magnetic field is beneficial for biomass biodiversity and abundance. The aim of this study was to determine the effect of magnetic field on the efficiency of organic compounds removal and nitrogen compounds transformations taking place in the biomass of rotating biological contactor. Investigations were carried out in a rotating biological contactor (RBC) working in a bench scale. Each section containedpackets of disks with a diameter of 0.22 m submerged in a semi-circular tank with a capacity of 2 L. Submergence of the disks was 40%. Disks rotated with speed of 60 rpm. The study was carried out using four RBCs – the first one was called the control unit, next three were under the influence of the magnetic field of 60 mT, 120 mT and 180 mT induction. Studies have shown that the efficiency of nitrification increased with growth ofmagnetic field induction. The magnetic field of 180 mT intensity increased nitrification efficiency significantly different, when compared with other systems, and was equal to 92%. Denitrification efficiency was the highest in the system, where the biomass was exposed to the magnetic field of 60 mT induction. Process efficiency decreased with increasing magnetic induction. Exposure of wastewaters and biofilm biomass in the magnetic field did not affect the statistical efficiency of the organic compounds removal. The highest percentage of COD biodegradation, on average 89.51%, was observed in a rotating biological contactor exposed to magnetic field of the highest tested induction.
Źródło:
Rocznik Ochrona Środowiska; 2013, Tom 15, cz. 2; 1511-1524
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie kompostu jako taniego sorbentu do usuwania barwników z roztworów wodnych
Application of Compost as a Cheap Sorbent for Dyes Removal from Aqueous Solutions
Autorzy:
Jóźwiak, T.
Filipkowska, U.
Rodziewicz, J.
Mielcarek, A.
Owczarkowska, D.
Powiązania:
https://bibliotekanauki.pl/articles/1819113.pdf
Data publikacji:
2013
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
tani sorbent
usuwanie barwników
roztwór wodny
reactive dyes
textile dyes
waste water
basic dyes
acid dyes
fly-ash
adsorption
sorption
chitosan
equilibrium
Opis:
This study was aimed at determining the feasibility of using compost as an unconventional sorbent for dyes removal from aqueous solutions. Compost applied in the study was a product of sewage sludge composting with plant residues (birch wood chips and rapeseed straw). Experiments were conducted for two anionic reactive dyes: Reactive Yellow 84 [RY84] (1701 g/mol – λmax = 357.5 nm) and Reactive Black 5 [RB5] (991 g/mol – λmax = 600.0 nm), and for two cationic dyes: Basic Green 4 [BG4] (365 g/mol – λmax = 618.0 nm) and Basic Violet 10 [BV10] (479 g/mol – λmax = 547.5 nm). The scope of the study included: determination of the optimal pH value of dyes adsorption onto compost, determination of equilibrium time of dyes sorption onto compost, determination of the maximum sorption capacity of the analyzed dyes on compost. During each experiment, sorbent concentration in the solution was at 5 g d.m./dm3. The concentration of dye remaining in the solution was determined with the spectrophotometric method on a UV-VIS SP 2000 spectrophotometer. Analyses were conducted at a room temperature – T = 22°C. The pH value of solutions was adjusted with aqueous solutions of HCl and NaOH. Sorption of the anionic reactive dyes RY84 and RB5 was the most effective at pH = 3. The optimal pH value of cationic dyes sorption was established at pH = 5. At a high pH value (pH = 9), the sorption of each type of dye was impaired due to partial solubilization of the compost sorbent. The equilibrium time of dyes sorption on compost accounted for 180 min in the case of RY84, RB5 and BG4, and for 240 min in the case of BV10 – 240 min. Analyses of the maximum sorption capacity of the selected dyes on compost were carried out already after establishing the optimal pH value of the sorption process for each dye. Results obtained were described with the use of two sorption models: a heterogenous Langmuir 2 model (double Langmuir equation), and a heterogenousFreundlich model. The Langmuir 2 model showed the best fit to experimental data (R2> 0.99). Due to the presence of functional groups -COOH and -OH, compost is negatively charged in aqueous solutions owing to which it prefers compounds with a positive charge (cationic dyes) during sorption. Electrostatic repulsion significantly impairs the adsorption of anionic dyes. The maximum sorption capacity of compost in the case of RY84 and RB5 reached 2.15 mg/g d.m. and 4.79 mg/g d.m., whereas in the case of BG4 and BV10 – 26.41 mg/g d.m. and 27.20 mg/g d.m., respectively. Results of the maximum sorption capacity of dyes on compost were referred to results obtained with other unconventional and cheap sorbents.
Źródło:
Rocznik Ochrona Środowiska; 2013, Tom 15, cz. 3; 2398-2411
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnoza nawyków żywieniowych studentów różnych kierunków studiów w Akademii im. Jana Długosza w Częstochowie
A diagnose of nutrition habits of Jan Dlugosz University Students in Czestochowa
Autorzy:
Rodziewicz-Gruhn, J.
Polacik, J.
Powiązania:
https://bibliotekanauki.pl/articles/5022.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Humanistyczno-Przyrodniczy im. Jana Długosza w Częstochowie. Wydawnictwo Uczelniane
Opis:
Celem pracy jest uzyskanie odpowiedzi na pytanie, czy kierunek studiów oraz płeć stanowią czynniki różnicujące w odniesieniu do nawyków żywieniowych studentów pierwszych lat studiów licencjackich na Akademii im. Jana Długosza w Częstochowie. Badania przeprowadzono od lutego do kwietnia 2013 roku wśród 102 studentek i 78 studentów Akademii im. Jana Długosza w Częstochowie. Zastosowano metodę sondażu diagnostycznego. Przeprowadzając badania, sprawdzono, czy osoby podejmujące studia są świadome skutków zdrowotnych złych nawyków żywieniowych i czy dbają o swoje zdrowie poprzez prawidłowe odżywianie. Kierunek studiów i płeć badanych wpływają na sposób żywienia studentów. Stwierdzono korzystniejszą częstotliwość spożywania posiłków wśród mężczyzn w porównaniu do kobiet. Zaobserwowane różnice w zakresie konsumpcji produktów żywnościowych pożądanych z punktu zdrowia, między studiującymi na kierunkach humanistycznych, technicznych i na wychowaniu fizycznym, były w większości przypadków nieistotne statystycznie. Można jednak zauważyć, że zarówno kobiety, jak i mężczyźni istotnie częściej spożywają dania typu fast-food, piją codziennie, w porównaniu do rówieśników z kierunku wychowanie fizyczne. Wśród studiujących na kierunkach technicznych i humanistycznych odnotowano większą częstotliwość popełniania błędów związanych z żywieniem w porównaniu do studiujących wychowanie.
Our objective was to answer the question whether the studied course or sex affect the nutrition habits of Jan Długosz University sophomore students. In the research conducted from February till April 2013 we interviewed 180 students (102 women and 78 men). We asked the students if they are aware of bad and good nutrition habits effects on their health. The studies course and sex affect the way the students eat. Men eat more frequently than women. The differences in the healthy diets of students (humane studies, technical studies and physical education) were statistically insignificant. However, the students of humane or technical studies eat more fast food and drink more often than their peers studying physical education. The former group is also more prone to mistakes in their diet.
Źródło:
Prace Naukowe Akademii im. Jana Długosza w Częstochowie. Kultura Fizyczna; 2013, 12, 2
1895-8680
Pojawia się w:
Prace Naukowe Akademii im. Jana Długosza w Częstochowie. Kultura Fizyczna
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies