Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Rahim, Abdul" wg kryterium: Autor


Wyświetlanie 1-7 z 7
Tytuł:
Water Pollution Index of Batujai Reservoir, Central Lombok Regency-Indonesia
Autorzy:
Rahim, Abdul
Soeprobowati, Tri Retnaningsih
Powiązania:
https://bibliotekanauki.pl/articles/124207.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
STORET
physical-chemical parameter
water quality
pollution index
Batujai reservoir
Opis:
Batujai reservoir is located in Central Lombok Regency, Indonesia. The government and local people use it for hydropower generation, drinking water, agricultural irrigation, fish farming, and tourism. The phenomenon of growing population and increasing industrial activities in the catchment area of Batujai reservoir always result in the discharge of various pollutants into the aquatic environment and cause the blooming of water hyacinth over almost 30% of the reservoir area. The aim of this study was to determine the water pollution index of Batujai reservoir. The samples were analysed for the following parameters: pH, temperature, DO, COD, BOD, TSS, and heavy metals. The research was done by using purposive sampling method and determination of water quality status with STORET method based on Government Regulation No. 82/2001. The measurement results show that the physical and chemical parameters of the Batujai reservoir water do not exceed the quality standard are the temperature (29 to 32°C); pH (6.6 to 7.5 mg/L); nitrate (0.421 to 0.546 mg/L); Cd (0.0005 to 0.005 mg/L); Cr (<0.001 to 0.018 mg/L); and the parameters that exceed quality standards are DO (3.8 to 4.9 mg/L); BOD (3.03 to 4.21 mg/L); COD (6.8 to 10.1 mg/L); phosphate (0.181 to 0.237 mg/L); and Pb (0.14 to 0.24 mg/L). The water quality status of Batujai reservoir was heavily polluted for standard quality on class I, II, III and moderately polluted for class IV.
Źródło:
Journal of Ecological Engineering; 2019, 20, 3; 219-225
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reclamation and Reutilization of Incinerator Ash in Artificial Lightweight Aggregate
Autorzy:
Norlia, Mohamad Ibrahim
Amat, Roshazita Che
Rahim, Mustaqqim Abdul
Rahim, Nur Liza
Rahim, Abdul Razak
Powiązania:
https://bibliotekanauki.pl/articles/2048860.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
light weight aggregate
incinerator
bottom ash
fly ash
concrete
Opis:
This study focused on the reclamation of ash from incineration process and development of new artificial lightweight aggregate (LWA) that have comparable properties with existing natural coarse aggregate. The main objective of this study is to examine potential use of recycled municipal solid waste incineration (MSWI) ash as raw material in LWA production with a method of cold-bonded pelletization. Two types of incineration ash which is bottom ash (BA) and fly ash (FA) were collected from Cameron Highland Incineration Plant, Malaysia. The properties of BA and FA are studied by means of X-Ray Fluorescence (XRF) and microstructure of these ashes were inspected using Scanning Electron Microscope (SEM). The properties of BALA and FALA produced in this study is examined including loose bulk density, water absorption and aggregate impact value (AIV). From the results of both types of artificial LWA, the lowest loose bulk density of BALA is BALA50 with 564.14 kg/m3 and highest is at 831.19 kg/m3. For FALA50, lowest loose bulk density is 573.64 kg/m3 and highest is 703.35 kg/m3. Water absorption of BALA and FALA is quite similar with one another in with the value of 23.8% and 22.6%, respectively. Generally, FALA have better qualities of LWA comparing with BALA with lower bulk density and water absorption and can be categorized as strong aggregate. In summary, reclamation and reutilization of incinerator ash has generated acceptable qualities for artificial LWA. Both types of BA and FA shown a great potential to be recycled as additional materials in artificial aggregate production.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 1; 269-275
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multicultural Pedagogy: Strengthening Social Interaction Among Multi-Ethnic Pre-School Children
Autorzy:
Mamat, Nordin
Hashim, Abdul Talib
Razalli, Abdul Rahim
Awang, Mohd Mahzan
Powiązania:
https://bibliotekanauki.pl/articles/2034171.pdf
Data publikacji:
2022-03-31
Wydawca:
Wydawnictwo Adam Marszałek
Tematy:
multi-ethnic
pre-school
multicultural
pedagogy
social interaction
Opis:
This study explored multicultural pedagogy in pre-school education and how it plays an important role in strengthening the social interactions among children. The Multicultural Pedagogy approach in teaching children has established the multi-ethnic (PERPADUAN/Unity) pre-school. It is a qualitative study with data drawn from observation and interview sessions aimed to identify strategies in nurturing social interaction among multi-ethnic children. Through purposive sampling, a teacher with twenty-five children and parents from various ethnicities were selected. This study revealed that practising multicultural pedagogy reflects the diversity of ethnics strengthening social interaction. The teacher exposed the children to the cultures of every ethnic group to ensure they have understood other cultures from different ethnicity. When the children are exposed to the elements of different cultures, a sense of acceptance and tolerance attitude can be fostered. This strategy nurtured national integration, encouraging interactions among multi-ethnic children, stimulating acceptance and tolerance between children and creating a school environment that reflects the diversity of ethnicities. Core multicultural elements have been found in the PERPADUAN/Unity School. Overall findings from the current study provide new evidence illustrating how multicultural pedagogy implemented strengthens social interaction in early childhood education.
Źródło:
The New Educational Review; 2022, 67; 56-67
1732-6729
Pojawia się w:
The New Educational Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Formation of Uniform Germanium Islands on Silicon Substrate Using Nickel as Catalyst by Thermal Evaporation Method
Autorzy:
Jumidali, M.
Hashim, M.
Abdul Aziz, A.
Abd Rahim, A.
Powiązania:
https://bibliotekanauki.pl/articles/1193093.pdf
Data publikacji:
2015-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.05.Ea
81.10.Bk
81.15.-z
Opis:
Uniform germanium islands (GIs) were grown on Si (100) using a nickel layer as catalyst through the physical vapor deposition of germanium (Ge) powder at 1000°C at different deposition times. Prior to the deposition of Ge layer, nickel (Ni) catalyst was deposited on silicon substrates via radio frequency magnetron sputtering technique. Scanning electron microscopy results showed that the increase in deposition time resulted in a variation in surface morphology. Energy dispersive X-ray spectrometer analysis found that the GI samples composed of Ni element indicating the role of Ni in uniform Ge islands formation. The X-ray diffraction pattern spectra revealed that the GIs exhibited a Ge cubic structure and the intensity of Ge peaks varies with deposition time. In-plane strain indicated that the strain caused by the substrate is tensile and changed to compressive strain at the longer deposition time. The Raman spectra exhibited a red shift in the Ge-Ge peak, compared with the bulk Ge, as a result of compressive strain of the GIs. Fourier transform infrared spectrum analysis also indicated that the optical band gap Eg values of GIs can be varied by deposition time.
Źródło:
Acta Physica Polonica A; 2015, 127, 4; 1068-1071
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fracture analysis for viscoelastic creep using peridynamic formulation
Autorzy:
Azizi, Muhammad Azim
Mohd Zahari, Mohd Zakiyuddin
Abdul Rahim, Sharafiz
Azman, Muhamad Amin
Powiązania:
https://bibliotekanauki.pl/articles/2200832.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
viscoelastic
peridynamic
creep behavior
fracture mechanic
Opis:
The purpose of this paper is to provide a peridynamic (PD) model for the prediction of the viscoelastic creep deformation and failure model. The viscoelastic characteristic consists of several stages, namely primary creep, secondary creep, tertiary creep and fracture. A non- linear viscoelastic creep equation based on the internal state variable (ISV) theory covering four creep stages and PD equations are used. The viscoelastic equation is inserted into the PD equation to derive a PD model with two time parameters, i.e., numerical time and vis- coelastic real time. The parameters of the viscoelastic equation are analyzed and optimized. A comparison between numerical and experimental data is performed to validate this PD model. The new PD model for nonlinear viscoelastic creep behavior is confirmed by an ac- ceptable similarity between the numerical and experimental creep strain curves with an error of 15.85%. The nonlinearity of the experimental and numerical data is sufficiently similar as the error between the experimental and numerical curves of the secondary stage strain rate against the load is 21.83%. The factors for the errors are discussed and the variation of the constants in the nonlinear viscoelastic model is also investigated.
Źródło:
Journal of Theoretical and Applied Mechanics; 2022, 60, 4; 579--591
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New Ray on Remediation of High Rings Polycyclic Aromatic Hydrocarbons: Remediation of Raw Petroleum Sludge Using Solidification and Stabilization Method
Autorzy:
Roslee, Noor Faiza
Kamil, Nor Amani Filzah Mohd
Kadir, Aeslina Abdul
Jalil, Abdul Rahim
Hamzah, Nurhidayah
Noor, Norazian Mohamed
Sandu, Andrei Victor
Powiązania:
https://bibliotekanauki.pl/articles/2174581.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
remediation
solidification/stabilization
organic contaminant
hazardous waste
Opis:
Solidification/Stabilization (S/S) method with cement as a binder to remediate metals in petroleum sludge has been successfully proven. However, this technique has not yet been explored to remediate organic contaminants since a high concentration of Total Petroleum Hydrocarbon (TPH) was also detected in the sludge. This study focuses on remediating 16 Polycyclic Aromatic Hydrocarbons (PAHs) compounds in raw petroleum sludge with Portland cement as a binder using the S/S method. The initial concentration of 16 PAHs in the raw sludge was first measured before the performance of the S/S method to remediate the PAHs were evaluated. The S/S matrices were tested for leaching behavior and strength after 7 and 28 days by air curing. The leaching test was measured using the Toxicity Characteristics Leaching Procedure (TCLP), and the remaining PAHs concentration in the matrices was analyzed using a Gas Chromatography-Mass Spectrometer (GC-MS). In the raw sludge, all 16 PAHs compounds were below the standard limit except for Benzo(a)anthracene, Benzo(a)pyrene, Dibenzo(ah)anthracene, and Indeno(1,2,3- cd_ pyrene), which are considered as high rings PAHs. The high rings PAHs show lower concentration in leachate than low rings PAHs, which indicates the potential of the S/S method in remediating high rings PAHs. The high sludge ratio in S/S matrices has shown that the percentage strength is increasing, similar to Portland cement. Therefore, this study contributed to the possibility of the S/S method in the remediation of PAHs in petroleum sludge by using only Portland cement as a binder.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 4; 1201--1208
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal Insulation and Mechanical Properties in the Presence of Glas Bubble in Fly Ash Geopolymer Paste
Autorzy:
Shahedan, Noor Fifinatasha
Abdullah, Mohd Mustafa Al Bakri
Mahmed, Norsuria
Liew, Yun Ming
Shayfull, Zamree Abd Rahim
Aziz, Ikmal Hakem A.
Kadir, Aeslina Abdul
Sandu, Andrei Victor
Ghazali, Mohd Fathullah
Powiązania:
https://bibliotekanauki.pl/articles/2048833.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
glass bubble
thermal insulation
geopolymers
fly ash
Opis:
The density, compressive strength, and thermal insulation properties of fly ash geopolymer paste are reported. Novel insulation material of glass bubble was used as a replacement of fly ash binder to significantly enhance the mechanical and thermal properties compared to the geopolymer paste. The results showed that the density and compressive strength of 50% glass bubble was 1.45 g/cm3 and 42.5 MPa, respectively, meeting the standard requirement for structural concrete. Meanwhile, the compatibility of 50% glass bubbles tested showed that the thermal conductivity (0.898 W/mK), specific heat (2.141 MJ/m3 K), and thermal diffusivity (0.572 mm2 /s) in meeting the same requirement. The improvement of thermal insulation properties revealed the potential use of glass bubbles as an insulation material in construction material.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 1; 221-226
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-7 z 7

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies