Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Pazarlıoğlu, S." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
The Effect of Yttrium Oxide Reinforcement on the Microstructural and Mechanical Properties of Biologically Derived Hydroxyapatite
Autorzy:
Bozkurt, Y.
Gokce, H.
Pazarlioglu, S.
Salman, S.
Powiązania:
https://bibliotekanauki.pl/articles/1401436.pdf
Data publikacji:
2015-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
87.85.jf
Opis:
In the present study, hydroxyapatite used as a matrix material was derived from the femur bones of Meleagris gallapova (MGHA) and then reinforced with yttriyum oxide (Y₂O₃, 5 and 10 wt.%). Then samples pelleted at 350 MPa were sintered between 900 and 1300°C. Finally, the effect of Y₂O₃ reinforcement on the microstructural and mechanical properties of MGHA was investigated. Scanning electron microscope (SEM) and X-ray diffraction (XRD) patterns were used for microstructural examinations. Density, microhardness and compressive strengths of composites were used to analyze their mechanical properties. Experimental results show that mechanical properties of composites were enhanced by increasing the temperature. The optimum results were obtained for MGHA-10% Y₂O₃ composites sintered at 1200°C.
Źródło:
Acta Physica Polonica A; 2015, 127, 4; 1403-1406
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hydroxyapatite Lanthanum Oxide Composites
Autorzy:
Bozkurt, Y.
Pazarlioglu, S.
Gokce, H.
Gurler, I.
Salman, S.
Powiązania:
https://bibliotekanauki.pl/articles/1401437.pdf
Data publikacji:
2015-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
87.85.jf
Opis:
In the present study a commercially synthetic hydroxyapatite powders (CSHAp) were doped with lanthanum oxide (5 and 10 wt.% La₂O₃). The composite powders were well homogenized and pelleted in an uniaxial mould at 350 MPa. Pelleted green bodies were sintered at five different temperatures. Finally, the effect of La₂O₃ amount on the microstructural and mechanical properties of CSHA was investigated. Microstructural properties were detected by X-ray diffraction patterns (XRD) and scanning electron microscope (SEM). Mechanical properties of the sintered samples were determined by the density, hardness and compression strength measurements. Experimental results show that the mechanical properties of HA can be improved by the doping of La₂O₃
Źródło:
Acta Physica Polonica A; 2015, 127, 4; 1407-1409
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural Characterization of Boro-Titanized AISI 1040 Steel
Autorzy:
Kon, O.
Pazarlıoğlu, S.
Durmaz, M.
Sen, U.
Sen, S.
Powiązania:
https://bibliotekanauki.pl/articles/1401328.pdf
Data publikacji:
2015-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.65.Lp
62.20.Qp
Opis:
In this study, boro-titanizing treatment was applied to AISI 1040 steel. In the coating treatment, steel samples were pre-boronized in a slurry salt bath consisting of borax, boric acid and ferro-silicon at 900°C for 2 h, then titanized by thermo-reactive deposition technique (TRD) in a powder mixture consisting of ferro-titanium, ammonium chloride, alumina and naphthalene at 1000°C for 1-4 h. The coated samples were characterized by X-ray diffraction analysis (XRD), scanning electron microscope (SEM), glow discharge optical emission spectroscopy (GDOES) and micro-hardness tests. Coated layer formed on the pre-boronized AISI 1040 steel was compact and homogeneous. X-ray studies showed that the phases formed on the steel surfaces are TiB₂, TiC, TiN and Fe₂B. The depth of the coating layer ranged from 3.41± 0.47 μm to 6.59± 0.51 μm, depending on treatment time. A higher treatment time resulted in a thicker boro-titanized layer. The average hardness of the coating layer was 4527± 284 $HV_{0.005}$.
Źródło:
Acta Physica Polonica A; 2015, 127, 4; 1211-1213
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies