Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Oh, J." wg kryterium: Autor


Tytuł:
A novel approach for the optimal control of autonomous underwater vehicles
Nowe podejście do sterowania optymalnego autonomicznych pojazdów podwodnych
Autorzy:
Yim, S.
Oh, J.
Powiązania:
https://bibliotekanauki.pl/articles/206733.pdf
Data publikacji:
2003
Wydawca:
Polska Akademia Nauk. Instytut Badań Systemowych PAN
Tematy:
AUV
SDRE
równanie Riccatiego zależne od stanu
sterowanie optymalne
autonomiczne pojazdy podwodne
optimal control
Opis:
The SDRE (State-Dependent Riccati Equation) is a technique recently proposed as a nonlinear control method. Despite the benefits due to its flexibility, the SDRE places high demand on the computational load of real-time applications, which is one of its most important drawbacks. This paper discusses a new nonlinear feedback controller for autonomous underwater vehicles (AUVs), which eventually converges to a conventional SDRE-based optimal controller. The proposed controller is derived by direct forward integration of an SDRE. This enables fast computation and so is applicable to real-time situations. For a state-dependent system, the proposed controller may be an alternative candidate to a conventional SDRE-based optimal controller if the system is slow-varying to different states. To cope with fast-varying systems, we introduced a deviation index, which indicates the extent of deviation of the proposed controller from the solution of a conventional SDRE-based one. Whenever the index exceeds a designated bound, the controller is initialised to the conventional SDRE optimal value. Using the deviation index, a designer can achieve a compromise between computation time and optimality. We applied the proposed controller to a numerical model of an AUV called ODIN, a well-known nonlinear, relatively high order, and slow-varying system. The global position/attitude regulation, tracking problems, and fault tolerance properties were examined in the simulation to show the effectiveness of the proposed controller.
Technika SDRE (równania Riccatiego zależnego od stanu) została ostatnio zaproponowana do celów syntezy sterowania nieliniowego. Niezależnie od swoich zalet, związanych z elastycznością, technika SDRE pociąga za sobą wysoki nakład obliczeniowy, co, zwłaszcza w przypadku zastosowań czasu rzeczywistego, stanowi poważne obciążenie. W artykule rozważono nowy rodzaj sterowania nieliniowego w pętli sprzężenia zwrotnego dla autonomicznych pojazdów podwodnych (AUV), które zbiega do konwencjonalnego sterowania opartego na SDRE. Sterowanie to jest wyprowadzone poprzez bezpośrednie całkowanie SDRE. Pozwala to na szybkie dokonywanie obliczeń i może być stosowane w czasie rzeczywistym. W układach zależnych od stanu zaproponowane sterowanie może być alternatywą do konwencjonalnych rozwiązań opartych na SDRE jeśli układ jest wolno zmienny w stosunku do stanów. Aby rozszerzyć zastosowanie na układy szybko zmienne, wprowadza się wskaźnik pokazujący rozbieżność między zaproponowanym sterowaniem a rozwiązaniem konwencjonalnego sterowania opartego na SDRE. Wtedy, gdy wskaźnik ten przekracza założoną wielkość progową, sterowanie jest inicjalizowane zgodnie z optymalna wartością według SDRE. Posługując się wartościami zaproponowanego wskaźnika projektant może osiągać kompromis między czasem obliczeń a stopniem optymalności. Zastosowano nową metodę do modelu numerycznego AUV o nazwie ODIN, który jest reprezentowany przez nieliniowy, wolno zmienny układ wysokiego rzędu. W trakcie symulacji, w celu pokazania efektywności zaproponowanego sterowania zbadano takie aspekty jak regulacja co do położenia i kierunku, nadążanie oraz odporność na błędy.
Źródło:
Control and Cybernetics; 2003, 32, 1; 127-146
0324-8569
Pojawia się w:
Control and Cybernetics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Laboratory evaluation of occupational exposure to hand-arm vibration (HAV) during grounds maintenance equipment operations
Autorzy:
Oh, J.
Chen, N.
Boyd, C.
Powiązania:
https://bibliotekanauki.pl/articles/28762628.pdf
Data publikacji:
2023
Wydawca:
Instytut Medycyny Wsi
Źródło:
Annals of Agricultural and Environmental Medicine; 2023, 30, 2; 384-389
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electromechanical portable energy harvesting device: analysis and experimental tests
Przenośne urządzenie elektromagnetyczne do pozyskiwania energii: analiza oraz badania eksperymentalne
Autorzy:
Gieras, J. F.
Oh, J. H.
Huzmezan, M.
Powiązania:
https://bibliotekanauki.pl/articles/194132.pdf
Data publikacji:
2008
Wydawca:
Politechnika Bydgoska im. Jana i Jędrzeja Śniadeckich. Wydawnictwo PB
Tematy:
pozyskiwanie energii
generator wibracyjny
elektromechaniczny
magnesy trwałe
energy harvesting
vibration generator
electromechanical
permanent magnets
Opis:
This paper presents the design analysis and performance of an energy harvesting prototype device operating on the principle of electromechanical energy conver- sion. The input vibration kinetic energy is converted into the output electrical energy. A spring - mass system with moving permanent magnet (PM) is mechanically excited by external vibrations. The voltage is induced in a stationary coil that is embraced by PM poles. When the coil is loaded with an external impedance, an electric current proportional to the induced EMF arises in the external circuit. Fundamental equations for performance calculations have been derived on the basis of elementary beam theory and circuit analysis. A prototype has been built and the calculation results have been validated with the test results.
Artykuł omawia projektowanie, analizę oraz parametry urządzenia prototypowego do pozyskiwania energii, pracującego na zasadzie elektromechanicznego przetwarzania energii. Energia kinetyczna wejściowa w postaci energii wibracji mechanicznych jest przetwarzana na energię elektryczną (na zaciskach wyjściowych). Układ sprężyna - masa z ruchomym magnesem trwałym jest pobudzany mechanicznie przez wibracje zewnętrzne. Napięcie elektryczne jest indukowane w cewce stacjonarnej, na skutek wibracji biegunów magnesów trwałych. Kiedy cewka zostanie obciążona przez impedancję zewnętrzną, w obwodzie zewnętrznym popłynie prąd elektryczny proporcjonalny do wzniecanej SEM w cewce. Równania podstawowe do obliczania parametrów i charakterystyk zostały wyprowadzone na podstawie teorii elementarnej belki podpartej, analizy obwodowej oraz analizy polowej. Obliczenia teoretyczne zostały zweryfikowane pomiarami na zbudowanym prototypie.
Źródło:
Zeszyty Naukowe. Elektrotechnika / Uniwersytet Technologiczno-Przyrodniczy w Bydgoszczy; 2008, 13; 17-36
0209-0570
Pojawia się w:
Zeszyty Naukowe. Elektrotechnika / Uniwersytet Technologiczno-Przyrodniczy w Bydgoszczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigated Serious Occupational Accidents in The Netherlands, 1998–2009
Autorzy:
Bellamy, L. J.
Manuel, H. J.
Oh, J. I. H.
Powiązania:
https://bibliotekanauki.pl/articles/89719.pdf
Data publikacji:
2014
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
accident analysis
trends
safety barriers
wypadki przy pracy
Holandia
badanie wypadków
bariery bezpieczeństwa
Opis:
Since 2003, a project has been underway to analyse the most serious occupational accidents in The Netherlands.All the serious occupational accidents investigated by the Dutch Labour Inspectorate for the 12 years of 1998−2009 inclusive have been entered into a database, a total of 20 030 investigations. This database uses a model of safety barriers supported by barrier tasks and management delivery systems such that, when combined with sector and year information, trends in the data can be analysed for their underlying causes. The trend analyses show that while the number of victims of serious reportable accidents is significantly decreasing, this is due to specific sectors, hazards and underlying causes. The significant results could not easily be directly associated with any specific regulation or action undertaken in The Netherlands although there have been many different approaches to reducing accidents during the period analysed, which could be contributing to the effect.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2014, 20, 1; 19-32
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Manufacturing And High Temperature Oxidation Properties Of Electro-Sprayed Fe-24.5% Cr-5%Al Powder Porous Metal
Wytwarzanie i wysokotemperaturowe utlenianie elektro-rozpylanego porowatego proszku Fe-24.5% Cr-5%Al
Autorzy:
Lee, K-A.
Oh, J-S.
Kong, Y-M.
Kim, B-K.
Powiązania:
https://bibliotekanauki.pl/articles/350912.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
powder porous metal
electro-spray process
electric wire explosion
Fe-24Cr-5Al
high temperature oxidation
porowaty proszek metalu
elektrorozpylanie
utlenianie wysokotemperaturowe
Opis:
Fe-Cr-Al based Powder porous metals were manufactured using a new electro-spray process, and the microstructures and high-temperature oxidation properties were examined. The porous materials were obtained at different sintering temperatures (1350°C, 1400°C, 1450°C, and 1500°C and with different pore sizes (500 μm, 450 μm, and 200 μm). High-temperature oxidation experiments (TGA, Thermal Gravimetry Analysis) were conducted for 24 hours at 1000°C in a 79% N2+ 21% O2, 100 mL/min. atmosphere. The Fe-Cr-Al powder porous metals manufactured through the electro-spray process showed more-excellent oxidation resistance as sintering temperature and pore size increased. In addition, the fact that the densities and surface areas of the abovementioned powder porous metals had the largest effects on the metal’s oxidation properties could be identified.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1169-1173
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Ni Content on the Austenite Stability and Mechanical Properties of Nanocrystalline Fe-Ni Alloy Fabricated by Spark Plasma Sintering
Autorzy:
Park, D.
Oh, S.-J.
Shon, I.-J.
Lee, S.-J.
Powiązania:
https://bibliotekanauki.pl/articles/352972.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Fe-Ni alloy
austenite stability
mechanical properties
spark plasma sintering
Opis:
The mechanical behavior and the change of retained austenite of nanocrystalline Fe-Ni alloy have been investigated by considering the effect of various Ni addition amount. The nanocrystalline Fe-Ni alloy samples were rapidly fabricated by spark plasma sintering (SPS). The SPS is a well-known effective sintering process with an extremely short densification time not only to reach a theoretical density value but also to prevent a grain growth, which could result in a nanocrystalline structures. The effect of Ni addition on the compressive stress-strain behavior was analyzed. The variation of the volume fraction of retained austenite due to deformation was quantitatively measured by means of x-ray diffraction and microscope analyses. The strain-induced martensite transformation was observed in Fe-Ni alloy. The different amount of Ni influenced the rate of the strain-induced martensite transformation kinetics and resulted in the change of the work hardening during the compressive deformation.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1477-1480
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface Characterization of Metallic Fuel Slugs Prepared by Modified Injection Casting
Autorzy:
Mun, S.-U.
Kim, K.-H.
Oh, S.-J.
Park, J.-Y.
Hong, S.-I.
Powiązania:
https://bibliotekanauki.pl/articles/351428.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sodium-cooled fast reactor
metallic fuel slug
U-Zr alloy
surface characterization
injection casting
Opis:
Metallic fuel slugs containing rare-earth (RE) elements have high reactivity with quartz (SiO2) molds, and a reaction layer with a considerable thickness is formed at the surface of metallic fuel slugs. The surface characterization of metallic fuel slugs is essential for safety while operating a fast reactor at elevated temperature. Hence, it is necessary to evaluate the surface characteristics of the fuel slugs so that chemical interaction between fuel slug and cladding can be minimized in the reactor. When the Si element causes a eutectic reaction with the cladding, it deteriorates the metallic fuel slugs. Thus, it is necessary to examine the characteristics of the surface reaction layer to prevent the reaction of the metallic fuel slugs. In this study, we investigated the metallurgical characteristics of the surface reaction layer of fabricated U-10wt.%Zr-Xwt.%RE (X = 0, 5, 10) fuel slugs using injection casting. The results showed that the thickness of the surface reaction layer increased as the RE content of the metallic fuel slugs increased. The surface reaction layer of the metallic fuel slug was mainly formed by RE, Zr and the Si, which diffused in the quartz mold.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 1049-1053
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Anti-pruritic effect of topical capsaicin against histamine-induced pruritus on canine skin
Autorzy:
Bae, S.
Yu, J.
Jeong, H.
Oh, T.
Powiązania:
https://bibliotekanauki.pl/articles/2087602.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
anti-pruritic effects
capsaicin
dog
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 4; 789-796
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quantitative Analysis of Cryomilled Nanocrystalline Ti-6Al-4V Alloy Powder by X-Ray Diffraction
Autorzy:
Oh, M.
Yu, H. K.
Lee, J.-H.
Oh, M. C.
Jung, S.-H.
Ahn, B.
Powiązania:
https://bibliotekanauki.pl/articles/356265.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nanocrystalline
cryomilling
Ti alloy
X-ray diffraction
size-strain plot method
Opis:
A nanocrystalline Ti alloy powder was fabricated using cryomilling. The grain size and lattice strain evolution during cryomilling were quantitatively analyzed using X-ray diffraction (XRD) based on the Scherrer equation, Williamson-Hall (W-H) plotting method, and size-strain (S-S) method assuming uniform deformation. Other physical parameters including stress and strain have been calculated. The average crystallite size and the lattice strain evaluated from XRD analysis are in good agreement with the result of transmission electron microscopy (TEM).
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1439-1442
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
De-Lubrication Behavior Of Novel EBS Based Admixed Lubricant In Aluminum P/M Alloy
Zachowanie nowego lubrykantu na bazie EBS w trakcie spiekania proszku stopu aluminium
Autorzy:
Oh, M. C.
Seok, H.
Kim, H. J.
Ahn, B.
Powiązania:
https://bibliotekanauki.pl/articles/354258.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
admixed lubricant
compaction pressure
powder metallurgy
sintering
Al-Cu-Mg alloy
lubrykant
zagęszczanie
metalurgia proszków
spiekanie
stop Al-Cu-Mg
Opis:
The objective of the present research is to develop a novel lubricant for Al-Cu-Mg P/M alloy and to address the effects of the lubricant and compaction pressure on sintered properties. A lubricant mixture consisting of Ethylene Bis Stearamide, Zn-Stearate, and fatty acid was newly developed in this study, and the de-lubrication behavior was compared with that of other commercial lubricants, such as Ethylene Bis Stearamide, Zn-Stearate, and Al-Stearate. Density and transverse rupture strength of sintered materials with each lubricant were examined, respectively. The microstructural analysis was conducted using optical microscope.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1427-1431
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
In vitro antibacterial effects of non-thermal atmospheric plasma irradiation on Staphylococcus pseudintermedius and Pseudomonas aeruginosa
Autorzy:
Bae, S.
Lim, D.
Kim, D.
Jeon, J.
Oh, T.
Powiązania:
https://bibliotekanauki.pl/articles/2087357.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
antibacterial effects
cold-atmospheric plasma
dog
Staphylococcus pseudinter- medius
Pseudomonas aeruginosa
Źródło:
Polish Journal of Veterinary Sciences; 2020, 23, 1; 13-19
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
High Temperature Deformation Flow Of A ZK60A Magnesium Alloy After Extrusion
Płynięcie stopu magnezu ZK60A podczas wysokotemperaturowego odkształcenia w trakcie wytłaczania
Autorzy:
Kawasaki, M.
Lee, H. J.
Oh, M. C.
Ahn, B.
Powiązania:
https://bibliotekanauki.pl/articles/354374.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
activation energy
extrusion
flow mechanics
magnesium alloy
tensile property
energia aktywacji
wytłaczanie
mechanika przepływu
stop magnezu
rozciąganie
Opis:
Flow behavior of a ZK60A magnesium alloy after continuous casting and subsequent extrusion was examined in tension at a range of strain rates of 3.0×10-6 − 1.0×10-2 s-1 at temperatures of 473-623K. The results demonstrated that the alloy exhibited a maximum elongation of ~250% at 523K when tested at an initial strain rate of 1.0×10-5 s-1 and strain rate sensitivity, m, of ~0.3-0.4 and the activation energy of ~94 kJ/mol were calculated under the testing conditions. The detailed investigation suggested that the high temperature flow of the ZK60A alloy having submicrometer grains demonstrates quasi-superplastic flow behavior controlled by a dislocation viscous glide process.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1327-1330
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of Surface Characteristics and Physical Properties on Biodegradable Magnesium-Calcium Alloys by Anodic Oxidation
Autorzy:
Kim, J.
Lee, J.
Yang, H.
Park, S.
Lim, H.
Oh, G.
Yun, K.
Powiązania:
https://bibliotekanauki.pl/articles/1191716.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
87.85.jj
87.85.jc
Opis:
The purpose of this study was to determine the effect of calcium (Ca) on the surface characteristics and physical properties of magnesium-calcium alloys after anodization. A novel binary alloy Mg-xCa (in which x=0.5, 1, or 5 wt.%) was cast by combining magnesium (99.9%) and calcium (99.9%) in an argon gas (99.99%) atmosphere. A magnesium alloy rod having a diameter of 15 mm was cut into discs, each 2 mm thick. The specimens were subjected to anodic oxidation at 120 V for 15 minutes at room temperature in an electrolyte solution consisting of calcium gluconate, sodium hexametaphosphate, and sodium hydroxide. Surface and cross-sectional morphological changes were observed using scanning electron microscopy, and the microstructures and phases were detected by means of X-ray diffraction. Hardness and surface roughness were assessed by means of a Vickers hardness tester and a surface roughness meter, respectively. The results show that the physical properties of these magnesium-calcium alloys have been improved, because it was possible to control the dissolution rate according to the amount of calcium added.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 736-741
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure Evolution of Ni-Based ODS Superalloy Powders During Horizontal Rotary Ball Milling
Autorzy:
Lee, H.-E.
Kim, Y. S.
Park, J. K.
Oh, S.-T.
Powiązania:
https://bibliotekanauki.pl/articles/355552.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high energy ball milling
Ni-base ODS superalloy
particle and crystalline size
microstructure
Opis:
Microstructure evolution of Ni-based oxide dispersion-strengthened alloy powders with milling time is investigated. The elemental powders having a nominal composition of Ni-15Cr-4.5Al-4W-2.5Ti-2Mo-2Ta-0.15Zr-1.1Y2O3 in wt % were ball-milled by using horizontal rotary ball milling with the change of milling velocity. Microstructure observation revealed that large aggregates were formed in the early stages of ball milling, and further milling to 5 h decreased particle size. The average crystalline size, estimated by the peak broadening of XRD, decreased from 28 nm to 15 nm with increasing milling time from 1 h to 5 h. SEM and EPMA analysis showed that the main elements of Ni and Cr were homogeneously distributed inside the powders after ball milling of 5 h.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1253-1255
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication Of Porous Ti By Thermal Decomposition And Sintering Of PMMA/TiH2 Powder Compact
Wytwarzanie porowatego tytanu przez rozkład termiczny i spiekanie wyprasek PMMA/TiH2
Autorzy:
Jeon, K. Ch.
Kim, Y. D.
Suk, M.-J.
Oh, S.-T.
Powiązania:
https://bibliotekanauki.pl/articles/352341.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
porous Ti
PMMA powders
thermal decomposition of TiH2
pore structure
porowaty tytan
PMMA
rozkład termiczny
struktura porów
Opis:
Porous Ti with controlled pore structure was fabricated by thermal decomposition and sintering process using TiH2 powders and Polymethylmethacrylates (PMMA) beads as pore forming agent. The beads sizes of 8 and 50 μm were used as a template for fabricating the porous Ti. The TiH2 powder compacts with 20 and 70 vol% PMMA were prepared by uniaxial pressing and sintered for 2 h at 1100°C. TGA analysis revealed that the PMMA and TiH2 were thermally decomposed at about 400°C forming pores and at about 600°C into metallic Ti phase. The porosity increased with increase in the amount of PMMA addition. Also, the microstructure observation showed that the pore size and shape were strongly dependent on the PMMA shapes.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1375-1377
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies