Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Nguyen, T.H." wg kryterium: Autor


Tytuł:
Możliwości i opłacalność wykorzystania ścieków szarych do nawadniania roślin
Feasibility and economic efficiency of greywater reuse for plant irrigation
Autorzy:
Nguyen, T. H.
Błażejewski, R.
Spychała, M.
Powiązania:
https://bibliotekanauki.pl/articles/401811.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
wykorzystanie ścieków
nawadnianie
woda wodociągowa
ścieki szare
życica trwała
greywater reuse
irrigation
tap water
greywater
perennial ryegrass
Opis:
Celem badań była ocena wpływu użycia ścieków szarych (surowych i oczyszczonych) do nawadniania trawy (życica trwała, Lolium perenne), wyhodowanej na drobnym piasku, na przyrost biomasy w okresie 4 miesięcy. Zastosowano trzy rodzaje cieczy do nawadniania (woda wodociągowa, surowe ścieki szare i oczyszczone ścieki szare) w na dwóch poziomach dawek częściowych: niskim i wysokim (5 i 15 mm na tydzień), w dawkach całkowitych o wysokości 15, 25, 35 i 45 mm na tydzień. Ścieki surowe z pralki, kąpieli w wannie i mycia rąk charakteryzowały się następującymi wskaźnikami: ChZT - 247 ± 33 mg O2·dm-3, BZT5 - 81 ± 12 mg O2·dm-3, azot całkowity - 7,2 ± 0,9 mg N·dm-3 i fosfor całkowity - 4,7 ± 0,7 mg P·dm-3, zaś ścieki oczyszczone odpowiednio: 81 ± 12 mg O2·dm-3, 23 ± 6 mg O2·dm-3, 4,8 ± 0.9 mg N·dm-3, 2 ± 0,2 mg P·dm-3. Wyniki badań wykazały, że wzrost nadziemnej biomasy jest zależny od całkowitej dawki cieczy w zakresie 15 do 45 mm na tydzień. Średni przyrost biomasy trawy podlewanej wodą wodociągową, ściekami oczyszczonymi i ściekami surowymi dla dawki częściowej 5 mm na tydzień (w ramach dawek całkowitych 15-45 mm na tydzień) wyniósł 40,5 ± 7,5, 39,1 ± 7,3, 42,8 ± 6,0 mg s.m., odpowiednio, a dla dawki częściowej 15 mm na tydzień: 52,6 ± 7,8, 54,0 ± 7,5, 50,3 ± 9,2 mg s.m., odpowiednio. Różnica przyrostu suchej biomasy nawadnianej oczyszczonymi ściekami szarymi dawką częściową 5 mm na tydzień i dawką częściową 15 mm na tydzień (na korzyść tej wyższej) była większa niż dla pozostałych rodzajów cieczy; była też istotna statystycznie (p > 6%). Badania wykazały, że surowe i oczyszczone ścieki szare, mogą stanowić alternatywę dla wody wodociągowej w kontekście nawadniania trawnika, nie wywierając negatywnego wpływu na przyrost biomasy.
The study was conducted on grass (Lolium perenne) grown on fine sand in pots to evaluate the effect of greywater reuse on total dry biomass of grass during 4 months. The experiment has been designed as full factorial with total water load: 15, 25, 35 and 45 mm·week-1. Three categories of irrigation water (tap water, treated greywater, raw greywater) were tested in conditional combination with two levels for each category that is the low and high level at 5 and 15 mm·week-1, respectively. The COD, BOD5, total nitrogen, total phosphorus is 247 ± 33 mg·dm-3, 81 ± 12 mg·dm-3, 7.2 ± 0.9 mg·dm-3, 4.7 ± 0.7 mg·dm-3 of raw greywater and 81 ± 12 mg·dm-3, 23 ± 6 mg·dm-3, 4.8 ± 0.9 mg·dm-3, 2 ± 0.2 mg·dm-3 of treated greywater, respectively. The results showed that the dry biomass yields increase when increasing total irrigation water dose from 15 to 45 mm·week-1. The dry biomass yields at 5 mm·week-1 share of tap water, treated greywater, or raw greywater in total irrigation water doses 15-45 mm·week-1 were equal to 40,5 ± 7,5, 39,1 ± 7,3, 42,8 ± 6,0 mg d.m. and at 15 mm·week-1 partial dose: 52,6 ± 7,8, 54,0 ± 7,5, 50,3 ± 9,2 mg d.m. per pot, respectively. The increase in dry biomass yield of grass irrigated with treated greywater (partial dose from 5 to 15 mm·week-1) was higher and more significant (p = 0.13, 0.06, 0.37) than in the two other cases. The study concludes that treated greywater, raw greywater can be a partial or complete replacement for tap water without compromising ryegrass biomass yield.
Źródło:
Inżynieria Ekologiczna; 2018, 19, 6; 80-86
2081-139X
2392-0629
Pojawia się w:
Inżynieria Ekologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Recovery of HCL from chloride leach solution of spent HDS catalyst by solvent extraction
Autorzy:
Banda, R.
Nguyen, T.H.
Lee, M.S.
Powiązania:
https://bibliotekanauki.pl/articles/185588.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
HCl
extraction
stripping
recovery
TEHA
wydobycie
Opis:
In the present work, amine based extractant and its mixture with cationic and solvating extractants were tested for the extraction of HCl from chloride solution containing Al(III). The chloride feed solution resulted from the leaching of spent HDS (hydro-desulfurization) catalysts. For this purpose, amine extractants, such as TOA (trioctyl amine), Alamine 336 (a mixture of tri-octyl/decyl amine), Alamine 308 (tri-isooctyl amine), and TEHA (tri 2-ethylhexyl amine) were used and the extraction and stripping behavior of HCl was compared. The extracted HCl was easily stripped from loaded TEHA phase, when compared with the other tested tertiary amine system. Solvent extraction reaction of HCl by TEHA was determined from the extraction data. Unlike TOA and Alamine 336, adding cationic extractant to TEHA had negligible effect on the extraction and stripping of HCl. In our experimental ranges, no Al was extracted by amines and pure HCl was recovered. MaCabe-Thiele diagrams for the extraction and stripping of HCl by TEHA were constructed.
Źródło:
Chemical and Process Engineering; 2013, 34, 1; 153-163
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A syntactic component for Vietnamese language processing
Autorzy:
Le-Hong, P.
Roussanaly, A.
Nguyen, T. M. H.
Powiązania:
https://bibliotekanauki.pl/articles/103931.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Podstaw Informatyki PAN
Tematy:
language
parsing
segmentation
syntactic component
tagging
tree-adjoining grammar
Vietnamese
Opis:
This paper presents the development of a grammar and a syntactic parser for the Vietnamese language. We first discuss the construction of a lexicalized tree-adjoining grammar using an automatic extraction approach. We then present the construction and evaluation of a deep syntactic parser based on the extracted grammar. This is a complete system that produces syntactic structures for Vietnamese sentences. A dependency annotation scheme for Vietnamese and an algorithm for extracting dependency structures from derivation trees are also proposed. This is the first Vietnamese parsing system capable of producing both constituency and dependency analyses. It offers encouraging performance: accuracy of 69.33% and 73.21% for constituency and dependency analysis, respectively.
Źródło:
Journal of Language Modelling; 2015, 3, 1; 145-184
2299-856X
2299-8470
Pojawia się w:
Journal of Language Modelling
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Solution to Reduce Air Environmental Pollution from Ships
Autorzy:
Pham, H.T.
Nguyen, T.M.
Powiązania:
https://bibliotekanauki.pl/articles/116944.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Pollution at Sea
Environment Protection
Ecology, MARPOL
Air Environmental Pollution
Gas Emissions
Exhaust Gas Emissions
Exhaust Gas
Opis:
Exhaust gas emissions from ships are increasingly polluting the air environment seriously. Therefore, the MARPOL 73/78 Annex VI is applied for all ships from 2017, Annex VI provided that the concentrations of NOx,SOx CO contained in ship’s exhaust gases must be less than 6.4 g/kWh, 0.6 g/kWh, and 5.5g/kWh respectively. Today, there are many solutions to reduce pollution emissions from exhaust gas of ships, such as improving combustion, using oil emulsion, using biofuel,…However, these solutions also have a handful of disadventages such as being unable to thoroughly resoulve problems, high cost, and very difficult to improve the quality of ship exhaust gas emissions for old ships. Exhaust gas treatment method uses a centralized treatment system where exhaust gas from the thermal engines is taken in a centralized treatment system before discharging into the air. After centralized treatment system, in comparision with raw exhaust gas, soot can be reduced by 98%, NOx can be reduced by 75%, SOx can be reduced by 80%. This method of treatment is not only low cost, good quality but also make marine heat-engines still use traditional fuels as well as need not improve its structure.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2015, 9, 2; 257-261
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of Solution for Safe Ship Considering Seakeeping PERformance
Autorzy:
Yoon, H.K.
Nguyen, V.M.
Nguyen, T.T.
Powiązania:
https://bibliotekanauki.pl/articles/116617.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
seakeeping
seakeeping performance
safe ship
safe ship considering
optimal weather routing
container ship
Dynamic Programming (DP)
Changwon National University (CWNU)
Opis:
In recent years, safety of a ships has become one important issues needed to solved as soon as possible in ship navigation. Optimal weather routing is one of best solution for ensuring safe operation of a ship with a with short passage time or minimum energy to avoid a certain excessive motion. This paper introduced the development of solution for safety and optimal weather routing a ship considering seakeeping performance based on model test result. This study introduced how to apply A* algorithm based on result of the seakeeping model test for determining the optimal ship routes. Seakeeping model test of 8600 TEU container ship was carried out in Changwon National University's seakeeping basin and its RAOs at various frequencies were used to predict the RMS motion values in irregular waves. The specially modelled path-cost function and the safety constraints were proposed for finding the optimal path of the ship. The comparison of ship performances estimated by great circle’s path and estimated optimal route during the voyage of the ship was investigated.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2018, 12, 3; 517-525
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Extraction of cordycepic acid from the fruiting body of Cordyceps militaris (L.)
Autorzy:
Do, T.H.
Nguyen, H.C.
Powiązania:
https://bibliotekanauki.pl/articles/80160.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cordycepic acid
fruiting body
Cordyceps militaris
extraction
optimization
ethanol concentration
response surface methodology
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2019, 100, 3
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ecological risk, seasonal and depth variations of toxic elements in a closed landfill in Vietnamese Mekong Delta province
Autorzy:
Giao, Nguyen T.
Nhien, Huynh T.H.
Powiązania:
https://bibliotekanauki.pl/articles/27312657.pdf
Data publikacji:
2023
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
environmental risk
heavy metals
landfill
soil properties
Opis:
The study was carried out to assess ecological risks at the closed landfill in Cai Dau town, Chau Phu district, An Giang province. Soil samples were collected at six locations (S1-S6) at depths of 0-20 cm and 60-80 cm in the rainy season (November 2020) and dry season (March 2021). The soil quality was evaluated using eight heavy metals (Mn, Fe, Cu, Zn, Ni, Pb, Cr and As). The results showed that most monitoring sites had heavy metal contents within the allowable limits for agricultural land of QCVN 03-MT:2015/BTNMT. Some heavy metals have been found to migrate to the soil layer of 60-80 cm. The heavy metals accumulation (Igeo) in the two soil layers did not differ; Ni, Cr, Pb and As accumulated at non-polluting levels - moderate to high in the rainy season, while Cr and As only accumulated in the dry season. The composite pollution index (PLI) indicated that the locations around the landfill were polluted; however, the ecological risk ranged from low to moderate (potential ecological risk index (PERI) = 102-195) in the rainy season. Only about 50% of study sites during the dry season were contaminated and the risk was low (PERI = 44-68). However, the area around the landfill always poses potential risks due to the presence of heavy metals, including Ni, Cr, As and Pb. Monitoring the heavy metals in the surrounding landfill for the potential risks to human health and environment is needed.
Źródło:
Journal of Water and Land Development; 2023, 57; 188--196
1429-7426
2083-4535
Pojawia się w:
Journal of Water and Land Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Luminescence Spectra of ZnAl$\text{}_{2}$O$\text{}_{4}$:Cr$\text{}^{3+}$ Spinel Nanopowders
Autorzy:
Luc, H. H.
Nguyen, T. K.
Nguyen, V. M.
Suchocki, A.
Kamińska, A.
Le, V. K.
Nguyen, V. H.
Luong, T. T.
Powiązania:
https://bibliotekanauki.pl/articles/2037040.pdf
Data publikacji:
2003-12
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.60.-b
72.80.Ga
81.05.Je
81.05.Mh
Opis:
The synthetic ZnAl$\text{}_{2}$O$\text{}_{4}$ spinels doped with Cr$\text{}^{3+}$ ions are prepared from ZnSO$\text{}_{4}$, Al$\text{}_{2}$(SO$\text{}_{4}$)$\text{}_{3}$, and Cr$\text{}_{2}$(SO$\text{}_{4}$)$\text{}_{3}$. The spinel single phase is detected from X-ray diffraction. Luminescence properties of Cr$\text{}^{3+}$ in ZnAl$\text{}_{2}$O$\text{}_{4}$ were studied by low temperature luminescence and decay measurements. Four luminescence lines at 14570, 14520, 14460, and 14330 cm$\text{}^{-1}$ were found to originate from structure distortion and the line at 14175 cm$\text{}^{-1}$ - from chromium pairs. The broad emission band at about 13540 cm$\text{}^{-1}$ is considered to arise from a new Cr$\text{}^{3+}$ center in ZnCr$\text{}_{2}$O$\text{}_{4}$.
Źródło:
Acta Physica Polonica A; 2003, 104, 6; 581-587
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cultural characteristics and cordycepin production of some Cordyceps militaris strains under artificial cultivation conditions
Autorzy:
Nguyen, L.T.
Le, V.V.
Nguyen, B.T.T.
Ngo, N.X.
Nguyen, H.T.T.
Nguyen, Q.D.
Mulla, S.
Powiązania:
https://bibliotekanauki.pl/articles/2096987.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Cordyceps militaris
mycelial
fruiting body
cordycepin
Opis:
Cordyceps militaris, a precious medical mushroom, has attracted wide attention in industrial fields. Currently, the degeneration phenomenon of C. militaris commercial strains is amongst the major challenges for cultivation at the industrial scale. The screening for superior strains with high yield and medicinal value is considered a realistic approach to overcome degeneration problems. In the present study, the mycelial growth, primordia formation, yield performance, and cordycepin content of five strains (DT1, DT2, DT3, DT4, and DT5) under artificial cultivation conditions were investigated. All strains showed mycelial growth on SDAY and liquid medium. The strains were successfully cultivated in brown rice medium and required 18 (strain DT3) to 25 days (strain DT5) to form primordia. Additionally, morphological characteristics of fruiting bodies varied among the strains. Strains DT4 and DT3 exhibited the highest fruiting body length with 74.23 ± 5.13 mm and 72.63 ± 2.62 mm, respectively whereas the highest diameter was recorded for strains DT1 (4.05 ± 0.18 mm) and DT2 (3.63 ± 0.12 mm). Of note, among the investigated strains, strain DT3 exhibited the highest biological efficiency (8.95 ± 0.07%) and cordycepin content (1.68 mg/g). Therefore, strain DT3 could be selected as a potential strain for commercial cultivation.
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2020, 101, 2; 135-145
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Isolation and characterization of a DREB homolog gene from a local drought-tolerant maize cultivar
Autorzy:
Huynh, T.T.H.
Nguyen, T.L.
Luu, H.L.
Nguyen, H.H.
Le, H.D.
Bui, M.M.
Pham, T.H.
Doan, T.B.T.
Le, T.T.H.
Ha, H.H.
Nong, V.H.
Powiązania:
https://bibliotekanauki.pl/articles/2117848.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
drought tolerance
maize
transformation
DrEB gene
Tevang-1 cultivar
Opis:
Clarifying the genetic background of the drought-tolerance trait is a crucial task that may help to improve plant performance under stress by a genetic engineering approach. dehydration-responsive element-binding protein (dREB) is a transcription factor family which modulates many stress-responsive genes. In this study, we isolated a DrEB homolog gene named ZmDrEBtv from Zea mays var. Tevang-1. Using bioinformatic tools, a number of Indels and SNPs in ZmDrEBtv sequence different from the reference accession were identified. In addition, based on deduced protein sequence similarity, ZmdREBtv was assigned to transcription factor dREB2 class as featured by a conserved dNa binding domain – aP2. The ZmDrEBtv construct under thecontrol of the rd29a promoter was transformed into a drought-sensitive maize plant, K7 line. The transgenic plants were assessed with reference to molecular and phenotypic characteristics related to the drought-tolenrance trait. The results proved that the maize plants carrying ZmDrEBtv gene showed enhanced tolerance and better performance to the water-deficit environment at different stages, compared to the wild-type plants.
Źródło:
Acta Biologica Cracoviensia. Series Botanica; 2019, 61, 2; 13-24
0001-5296
Pojawia się w:
Acta Biologica Cracoviensia. Series Botanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Erosion and deposition processes from field experiments of hydrodynamics in the coastal mangrove area of Can Gio, Vietnam
Autorzy:
Nguyen, H.T.L.
Luong, H.P.V.
Powiązania:
https://bibliotekanauki.pl/articles/48128.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
hydrodynamics
erosion process
depositional process
field experiment
mangrove area
suspended sediment concentration
Can Gio area
Vietnam
Źródło:
Oceanologia; 2019, 61, 2
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal-mechanical coupled simulation
Autorzy:
Nguyen, H. P.
Derewońko, A.
Niezgoda, T.
Powiązania:
https://bibliotekanauki.pl/articles/244229.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
thermo-mechanical coupled
simulation
plastic deformation
Opis:
Optimal design of engineering structures and technological processes requires taking into account various factors affecting the state of strain and stresses in the structure. Coupled thermo-mechanical analysis enables, among others, determination of undesirable changes in a body shape resulting from the implementation method of the initially-boundary conditions, for example, time-varying load and physical properties of the material depending on the temperature. They are also used to determine residual stresses remaining after manufacturing to prevent revalued stiffness and rigidity of the designed construction. In this study, coupled thermo-mechanical analysis illustrated by metal machining operation is presented. The commercial code MSC.Marc has been used to develop a coupled thermo-mechanical finite element model of plane-stress orthogonal metal cutting operations. Metal cutting is one of the most important and common manufacturing processes in the car industry. A thermal mechanical transient analysis is performed to convert mechanical work into heat by plastic deformation of the workpiece material and friction during metal machining operation. The finite element mesh distortion, due to large deformations, requires a remesh technique. The influence of parameters of the 2D and 3D finite element mesh adaptation on plastic deformation and temperature generated in the cutting processing is considered.
Źródło:
Journal of KONES; 2015, 22, 3; 161-168
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simple method to improve the TCXDVN 306:2004 indoor climate standard for closed office workplaces in Vietnam
Autorzy:
Ha, Pham T. H.
Hoa, Nguyen T.
Binh, Pham T.
Powiązania:
https://bibliotekanauki.pl/articles/35521811.pdf
Data publikacji:
2021
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
thermal comfort
artificial indoor environment
standard indoor climatic parameters
office workplace
energy efficient building
Vietnam
Opis:
Thermal comfort is an important parameter of indoor climate, which affects office worker health and productivity, and also aids planning for energy efficient building design and operation. To provide satisfactory thermal comfort in office workplaces under hot and humid outdoor conditions, most contemporary office buildings in Vietnam are fitted with ducted air-conditioning systems. The current Vietnamese standard TCXDVN 306:2004 for indoor climate was derived from thermal comfort research conducted between the 1960s and 1980s. This standard is limited by various drawbacks, including no distinction between natural or artificial environments. In response, this 2018 research provides physical measurements and opinion surveys of current indoor climatic conditions in representative office workplaces in three regions of Vietnam: North, Central and South. The measurement results have been transformed into ET, PMV and PPD indicators, which value demonstrate the shortcomings of the TCXDVN 306:2004 standard, while providing a baseline input for updating this standard to meet the thermal comfort needs of air-conditioned office workplaces, based on the concept of probability comfort, which are integral with the ISO and the ASHRAE standard.
Źródło:
Scientific Review Engineering and Environmental Sciences; 2021, 30, 1; 117-133
1732-9353
Pojawia się w:
Scientific Review Engineering and Environmental Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Separator taśmowy - modyfikacja stołów taśmowych typu Vanner zastosowana w Wietnamie
Belt separator – Vanner type separators modification introduced in Vietnam
Autorzy:
Mijał, W.
Nguyen, N.P.
Pham, V.L.
Tran, T.T
Phung, T.T.
Pham, T.H.
Nguyen, H.S.
Powiązania:
https://bibliotekanauki.pl/articles/166768.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
separator taśmowy
separator typu Vanner
węgiel kamienny
wzbogacanie węgla
próby wzbogacania
górnictwo wietnamskie
belt separator
Vanner type separator
hard coal
coal beneficiation
beneficiation tests
Vietnam’s mining industry
Opis:
Separatory typu Vanner były stosowane głównie do wzbogacania rud takich jak: miedź, ołów, złoto itp.. Konstrukcja tego urządzenia była nietypowa, gdyż był to stół taśmowy, na którym następował rozdział materiału, podobnie jak na klasycznym stole koncentracyjnym. Urządzenie o podobnej konstrukcji jest stosowane do przeróbki węgla kamiennego w wietnamskim przemyśle wydobywczym. Hanoi University of Mining and Geology przeprowadzał wiele testów dla zastosowania tego urządzenia, a w niniejszym artykule zostanie przedstawiona część wyników, jakie uzyskiwano podczas projektowania węzła technologicznego dla węgla płukanego w zakładach Vang Danh i Uong Bi o uziarnieniu 3-20 mm.
Vanner type separators were mainly used to enrich ores such as copper, lead, gold, etc. The construction of this device was atypical, because it was a belt table on which the material was separated like on a classic concentration table. A device of similar construction is used for processing hard coal in the Vietnam’s mining industry. Hanoi University of Mining and Geology has carried out many tests for the use of this device, and this paper presents some of the results obtained during the design of the technological node for the rinsed coal at the Vang Danh and Uong Bi plants with a grain size of 3-20 mm.
Źródło:
Przegląd Górniczy; 2018, 74, 5; 42-47
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sintering and Microstructures of SUS 316L Powder Produced by 3D Printing Process
Autorzy:
Kim, W. J.
Nguyen, H.-H.
Kim, H. Y.
Nguyen, M.-T.
Park, H. S.
Kim, J.-C.
Powiązania:
https://bibliotekanauki.pl/articles/356018.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
stainless steel
3D printing
selective laser sintering
SUS 316L
flake powder
Opis:
Selective laser sintering (SLS) is a type of laminating sintering technique, using CO2 laser with (metal, polymer, and ceramic) powders. In this result, the flake SUS 316L was used to achieve a high porous product, and compare to spherical type. After SLS, the porosity of flake-type sample with 34% was quite higher than that of the spherical-type one that had only 11%. The surface roughness of the flake SLS sample were also investigated in both inner and surface parts. The results show that the deviation of the roughness of the surface part is about 64.40μm, while that of the internal one was about 117.65μm, which presents the containing of high porosity in the uneven surfaces. With the process using spherical powder, the sample was quite dense, however, some initial particles still remained as a result of less energy received at the beneath of the processing layer.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1215-1218
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of sequence polymorphism and gene expression of OsSOS1 gene in two contrasting rice genotypes
Autorzy:
Do, P.T.
Pham, H.Q.
Nguyen, H.M.
Le, D.H.
Powiązania:
https://bibliotekanauki.pl/articles/19670.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Źródło:
Acta Biologica Cracoviensia. Series Botanica; 2018, 60, 1
0001-5296
Pojawia się w:
Acta Biologica Cracoviensia. Series Botanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical analysis of rod uniaxial tension considering thermo-mechanical coupling effect
Numeryczna analiza jednoosiowego rozciągania pręta z uwzględnieniem efektu sprzężenia termomechanicznego
Autorzy:
Nguyen, H. P.
Niezgoda, T.
Derewońko, A.
Jachimowicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/263858.pdf
Data publikacji:
2015
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
thermo-mechanical coupling
uniaxial tension
finite element method
sprzężenie termomechaniczne
jednoosiowe rozciąganie
metoda elementów skończonych
Opis:
This paper presents numerical analyses of uniaxial tension tests on rods made of a material with elastic-plastic characteristics with mapping the temperature fields generated in the fields of plastic strains. The use of thermo-mechanical coupling algorithms implemented in CAE programs that enable us to enter the parameters of materials dependent on temperature and used to visualize the damage of the samples is presented. The numerical models were validated with experimental research.
W pracy przedstawiono analizy numeryczne testów jednoosiowego rozciągania prętów wykonanych z materiału o charakterystyce sprężysto-plastycznej z odwzorowaniem pól temperatury generowanych w obszarach odkształceń trwałych. Zaprezentowano wykorzystanie algorytmów sprzężenia termomechanicznego zaimplementowanych w programach CAE, umożliwiających wprowadzenie parametrów materiałów zależnych od temperatury oraz stosowanych do wizualizacji zniszczenia próbek. Wyniki symulacji zwalidowano badaniami eksperymentalnymi.
Źródło:
Metallurgy and Foundry Engineering; 2015, 41, 4; 189-199
1230-2325
2300-8377
Pojawia się w:
Metallurgy and Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Formation of Different Cu Nanopowders and Stability of Cu Fluids Produced by Electrical Explosion of Wire in Liquid
Autorzy:
Nguyen, M.-T.
Kim, J.-H.
Kim, J.-C.
Powiązania:
https://bibliotekanauki.pl/articles/355217.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Cu nanopowder
Cu nanofluids
electrical explosion of wire
stability of nanofluids
Opis:
In this study, copper nanoparticles and nanofluids were synthesized by electrical explosion of wire (EEW) in liquid media such as water, ethanol, and acetone. The effect of the different conditions on the properties of the as-synthesized Cu powders and nanofluids were investigated. X-ray diffraction (XRD) analysis was employed to measure the phase of the as-synthesized powder. Only pure Cu phase appeared in case of acetone condition, but CuO and CuO2 phases could be observed in the others. The EEWed particle size was broadened from under 50 to 100 nm. The results showed that acetone was the best condition for achieving smaller particles, preventing the oxidation of the Cu particles and good stability of the nanofluids.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1453-1457
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modular intelligent fixture system for flexible clamping of large parts
Autorzy:
Möhring, H.-C.
Gessler, W.
König, A.
Nguyen, L. T.
Nguyen, Q. P.
Powiązania:
https://bibliotekanauki.pl/articles/100187.pdf
Data publikacji:
2017
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
machine tool
modular fixture
hybrid material
intelligent system
Opis:
In this work a modular intelligent fixture system for flexible clamping of large parts is presented. The fixture modules consist of a hybrid material structure involving metal frame elements and mineral casting. These modules can be combined and connected to realize fixtures adapted to the geometry of the workpiece and requirements of the machining processes. By integrated pipes and interfaces, an internal hydraulic supply and active cooling is possible even for combined modules. Temperature and acceleration sensors allow for an active thermal control and process monitoring. The modules and first test fixtures are investigated in experiments.
Źródło:
Journal of Machine Engineering; 2017, 17, 4; 29-39
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Phytochemical composition and antibacterial activity of ethanolic extract from trunk of Rothmannia wittii (Craib) Bremek. (Rubiaceae) newly found in Vietnam
Autorzy:
Van, H.T.
Nguyen, T.T.
Ton, H.T.T.
Dinh, K.T.T.
Le, V.S.
Pham, T.V.
Tran, G.B.
Powiązania:
https://bibliotekanauki.pl/articles/2096309.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Rothmannia wittii
extract
phytochemical composition
antibacterial activity
LC-MS
Opis:
Rothmannia wittii, which is found in Binh Chau-Phuoc Buu Nature Reserve, Bung Rieng ward, Xuyen Moc District, Ba Ria-Vung Tau Province, Vietnam, is a rare species of Rubiaceae family. The present study aimed to determine the phytochemical composition and antimicrobial activity of the ethanolic extract of the R. wittii trunk. A total of 10 compounds were identified by liquid chromatography-mass spectrophotometry (LC-MS), including 1) benzene, 1-(1,5-dimethyl-4- hexenyl)-4-methyl, 2) diphenylsulfone, 3) 6β-hydroxy-10-O-acetylgenipin, 4) cinnamyl-cinnamate, 5) genipin, 6) megastigmatrienone, 7) ethyl p-methoxy-trans-cinnamate, 8) rothalazepane, 9) 1,3,6-trimethylpyrano[2,3-d ]imidazole-2,5(1H,3H)-dione, and 10) shanzhiol. The extract also exhibited an antibacterial activity against six bacterial strains: Bacillus cereus, Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, Salmonella typhimurium and Salmonella enteritidis, as determined via disk diffusion agar method.
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2020, 101, 4; 301-307
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Forecasting Stock Price using Wavelet Neural Network Optimized by Directed Artificial Bee Colony Algorithm
Autorzy:
Khuat, T. T.
Le, Q. C.
Nguyen, B. L.
Le, M. H.
Powiązania:
https://bibliotekanauki.pl/articles/308651.pdf
Data publikacji:
2016
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
Artificial Bee Colony algorithm
Artificial Neural Network
back-propagation algorithm
stock price forecasting
wavelet transform
Opis:
Stock prediction with data mining techniques is one of the most important issues in finance. This field has attracted great scientific interest and has become a crucial research area to provide a more precise prediction process. This study proposes an integrated approach where Haar wavelet transform and Artificial Neural Network optimized by Directed Artificial Bee Colony algorithm are combined for the stock price prediction. The proposed approach was tested on the historical price data collected from Yahoo Finance with different companies. Furthermore, the prediction result was found satisfactorily enough as a guide for traders and investors in making qualitative decisions.
Źródło:
Journal of Telecommunications and Information Technology; 2016, 2; 43-52
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation aided design of intelligent machine tool components
Autorzy:
Mohring, H. C.
Wiederkehr, P.
Leopold, M.
Nguyen, L. T.
Hense, R.
Siebrecht, T.
Powiązania:
https://bibliotekanauki.pl/articles/100035.pdf
Data publikacji:
2016
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
characteristic diagram based correction
structure model based correction
thermoelastic deformation
online enabled TCP correction machine tool
intelligent component
process simulation
layout methodology
Opis:
By integrating sensors and actuators, intelligent machine tool components can be realized, which allow the monitoring of machining processes and machine tool states and an active influencing of process conditions. In the design and layout of these intelligent machine tool components, their mechanical structure and the functional performance of the sensor and actuator sub-systems have to be optimized. As an example, a sensor and actuator integrated fixture system for clamping large but sensitive aerospace structural parts is presented here. In order to investigate the major influences of design approaches on the behaviour of the workpiece and fixture, especially with respect to vibrations and process stability during milling, multiple test rigs and prototypes for basic analyses and machining tests were developed and realized. Experimental and Finite Element Analysis (FEA) results are presented and discussed. Process simulations were conducted taking the dynamic behaviour of the clamped workpiece at different processing steps into account. This simulation can be used for predicting the limits of the process stability. An approach of sensor and actuator integration is described and test results are shown. The paper introduces a principle design and layout methodology for similar intelligent machine tool components.
Źródło:
Journal of Machine Engineering; 2016, 16, 3; 5-33
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adsorption and Desorption Characteristics and Purification of Isoflavones from Crude Soybean Extract Using Macroporous Resins
Autorzy:
Tran, Thi N.
Bui, Xuan V.
Loan, Nguyen T.
Anh, Nguyen H.
Le, Truong D.
Truong, Thi M.
Powiązania:
https://bibliotekanauki.pl/articles/2051036.pdf
Data publikacji:
2022-06-09
Wydawca:
Instytut Rozrodu Zwierząt i Badań Żywności Polskiej Akademii Nauk w Olsztynie
Tematy:
soybean isoflavones
macroporous resin
purification
adsorption and desorption characteristics
daidzin
genistin
Opis:
Isoflavones in soybean have been well-known with many health-promoting effects on humans. This study aimed to purify isoflavones from the crude soybean extract by the static adsorption/desorption process on macroporous resins. A screening test of four commercial resins: D101, AB-8, Amberlite(R) XAD4, and Diaion HP20 according to their adsorption/desorption characteristic for isoflavones was investigated. All four resins showed high adsorption and desorption characteristics in which D101 resin was chosen as the most suitable resin for purifying isoflavones. Compositional analysis showed that daidzin and genistin were the main isoflavones in the crude soybean extract. The adsorption isotherms data of total isoflavones, daidzin, and genistin fitted well with the Langmuir model with R2>0.98. The dynamic adsorption conditions for the purification process of isoflavones on the D101 resin-packed column were selected at the bed volume (BV) of 200 mL, feed volume of 3.75 BV, and flow rate of 1.5 BV/h. The dynamic desorption was carried out with the elution solution of 70% (v/v) ethanol, elution volume of 2.5 BV, and flow rate of 1 BV/h. The total isoflavone content in the purified extract was 8.70-fold higher than its initial content in the crude soybean extract with a recovery yield of nearly 80%. The study results reveal a strong possibility for large-scale production of isoflavones for further application in functional food products or pharmaceutical products.
Źródło:
Polish Journal of Food and Nutrition Sciences; 2022, 72, 2; 183-192
1230-0322
2083-6007
Pojawia się w:
Polish Journal of Food and Nutrition Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of changes in the growth and chemical constituents of Anoectochilus formosanus Hayata grown under hydroponic conditions
Autorzy:
Nguyen, H.C.
Nhu, T.Q.M.
Dung, P.V.
Hieu, N.D.
Tuan, T.T.
Huyen, P.X.
Truong, D.-H.
Powiązania:
https://bibliotekanauki.pl/articles/80522.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Anoectochilus formosanus
medicinal plant
mineral nutrition
hydroponic cultivation
chemical constituent
antioxidant activity
phytochemical screening
alkaloid content
flavonoids
glycoside
terpenoid
steroid
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2018, 99, 4
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Induction, growth and paclitaxel content of needle- and petiole-derived calli in Himalayan yew (Taxus wallichiana Zucc.) under light-emitting diodes
Autorzy:
Nhut, D.T.
Nguyen, P.L.H.
Don, N.T.
Hien, N.T.T.
Huy, N.P.
Nam, N.B.
Vinh, B.T.
Luan, T.C.
Powiązania:
https://bibliotekanauki.pl/articles/19361.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Źródło:
Acta Biologica Cracoviensia. Series Botanica; 2014, 56, 2
0001-5296
Pojawia się w:
Acta Biologica Cracoviensia. Series Botanica
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies