Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Muller, S." wg kryterium: Autor


Tytuł:
Charge Carrier Dynamics in $Ga_{1-x}Mn_{x}As$ Studied by Resistance Noise Spectroscopy
Autorzy:
Lonsky, M.
Teschabai-Oglu, J.
Pierz, K.
Sievers, S.
Schumacher, H.
Yuan, Y.
Böttger, R.
Zhou, S.
Müller, J.
Powiązania:
https://bibliotekanauki.pl/articles/1397018.pdf
Data publikacji:
2018-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.50.Pp
73.50.Td
73.50.-h
73.61.-r
64.60.ah
61.72.-y
Opis:
We report on electronic transport measurements of the magnetic semiconductor Ga_{1-x}Mn_{x}As, whereby the defect landscape in various metallic thin films (x=6%) was tuned by He-ion irradiation. Changes in the distribution of activation energies, which strongly determine the low-frequency 1/f-type resistance noise characteristics, were observed after irradiation and can be explained by deep-level traps residing in the As sublattice. Various other kinds of crystalline defects such as, for instance, Mn interstitials, which possibly form nanoscale magnetic clusters with a fluctuating spin orientation, also contribute to the 1/f noise and can give rise to random telegraph signals, which were observed in films with x=7%. In addition, we neither find evidence for a magnetic polaron percolation nor any features in the noise near the Curie temperature.
Źródło:
Acta Physica Polonica A; 2018, 133, 3; 520-522
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dissecting the action of H2O2 after its metabolic formation in chloroplasts
Autorzy:
Jaspert, N.
Balazadeh, S.
Arif, M.
Muller-Rober, B.
Maurino, V.
Powiązania:
https://bibliotekanauki.pl/articles/80107.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
conference
reactive oxygen species
toxic cellular metabolite
signalling molecule
Arabidopsis thaliana
glycolate
chloroplast
real-time polymerase chain reaction
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2013, 94, 2
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electroluminescence Investigation of the Lateral Field Distribution in AlGaN/GaN HEMTs for Power Applications
Autorzy:
Baeumler, M.
Polyakov, V.
Gütle, F.
Dammann, M.
Benkhelifa, F.
Waltereit, P.
Reiner, R.
Müller, S.
Wespel, M.
Quay, R.
Mikulla, M.
Wagner, J.
Ambacher, O.
Powiązania:
https://bibliotekanauki.pl/articles/1197910.pdf
Data publikacji:
2014-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.60.Fi
85.30.De
85.30.Tv
85.40.Bh
85.40.Qx
73.40.-c
73.90.+f
73.61.Ey
73.50.Mx
Opis:
The lifetime and stability of AlGaN/GaN heterostructure field effect transistors at high power levels can be enhanced by introducing field plates to reduce electric field peaks in the gate-drain region. Simulations of the electric field distribution along the channel using the 2D ATLAS software from Silvaco indicate that above a characteristic drain source voltage three spatially separated electric field peaks appear, one located at the drain-side edge of the gate foot, one at the end of the drain-sided gate field plate, and one at the end of the source shield field plate. The close correlation between lateral electric field and the electroluminescence due to hot electron related intra-band transitions can be very helpful when optimizing the electric field distribution in high power devices. Electroluminescence microscopy images of devices with gate and source shield field plate reveal the peaks located at the locations of enhanced electric field. By studying the voltage dependence of the electroluminescence peaks the influence of the field plates on the electric field distribution in source drain direction can be visualized.
Źródło:
Acta Physica Polonica A; 2014, 125, 4; 982-985
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electron Transport and Point Contact Spectroscopy of Cubic DyCu$\text{}_{5}$
Autorzy:
Nenkov, K.
Idzikowski, B.
Ilkovic, S.
Kačmarčiková, E.
Reiffers, M.
Müller, K.
Powiązania:
https://bibliotekanauki.pl/articles/2013688.pdf
Data publikacji:
2000-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
71.20.Eh
72.15.Eb
73.23.Ad
73.40.Jn
Opis:
The electron transport properties and point contact spectra of melt-spun DyCu$\text{}_{5}$ with the cubic phase (structure type AuBe$\text{}_{5}$, space group $F\overline{4}3m$) were investigated. It was found by ac-susceptibility measurements that below a transition temperature T$\text{}_{m}$=6.5 K this phase shows metamagnetism. Between T$\text{}_{m}$ and T$\text{}_{C}$=14.5 K a spontaneous magnetization is found. Our measurements of electrical resistivity confirm the existence of two magnetic phase transitions in the compound. Furthermore, we present point contact spectra of DyCu$\text{}_{5}$-Cu heterocontacts which are directly proportional to the electron-quasiparticle interaction function. Apart from a peak at about 18 meV, which is characteristic of electron-phonon interaction in pure Cu, we observed a series of additional maxima at lower energy, which are connected with the allowed 4f-transitions from the ground state to excited crystalline electric field levels.
Źródło:
Acta Physica Polonica A; 2000, 97, 5; 843-846
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental Investigations on the Ejector Forces in the Die Casting Process
Autorzy:
Krischke, S.
Müller, S.
Schuchardt, T.
Kouki, Y.
Dilger, K.
Powiązania:
https://bibliotekanauki.pl/articles/382411.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative foundry technology
innovative foundry material
information technology
foundry industry
high pressure die casting
ejector force
innowacyjna technologia odlewnicza
innowacyjny materiał odlewniczy
technologia informatyczna
przemysł odlewniczy
odlewanie wysokociśnieniowe
Opis:
A measuring system was developed for the measurement of ejector forces in the die casting process. When selecting the sensor technology, particular care was taken to ensure that measurements can be taken with a high sampling rate so that the fast-running ejection process can be recorded. For this reason, the system uses piezoelectric force sensors which measure the forces directly at the individual ejector pins. In this way, depending on the number of sensors, it is possible to determine both the individual ejector forces and the total ejector force. The system is expandable and adaptable with regard to the number and position of the sensors and can also be applied to real HPDC components. Automatic triggering of the measurements is also possible. In addition to the measuring system, a device and a method for in-situ calibration of the sensors have also been developed. To test the measuring system, casting experiments were carried out with a real aluminium HPDC aluminium component. The experiments showed that it is possible to measure the ejector forces with sufficient sampling rate and also to observe the process steps of filling, intensification and die opening by means of ejector forces. Experimental setup serves as a basis for future investigations regarding the influencing parameters on the ejection process.
Źródło:
Archives of Foundry Engineering; 2018, 18, 4; 116-119
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Femtosecond Spectral Hole Burning Spectroscopy as a Probe of Exciton Dynamics in Quantum Dots
Autorzy:
Műller, T.
Moldaschl, T.
Parz, W.
Golka, S.
Strasser, G.
Unterrainer, K.
Powiązania:
https://bibliotekanauki.pl/articles/1813185.pdf
Data publikacji:
2008-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.21.La
78.47.-p
78.67.Hc
Opis:
We present measurements of the dynamics of photoexcited excitons in an ensemble of InAs/GaAs self-assembled quantum dots using a femtosecond spectral hole burning technique. We use this technique to examine the exciton spin relaxation and the line shape of optical transitions in the dots.
Źródło:
Acta Physica Polonica A; 2008, 113, 3; 777-782
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flexible coupling of drive and guide elements for parallel-driven feed axes to increase dynamics and accuracy of motion
Autorzy:
Peukert, C.
Merx, M.
Müller, J.
Ihlenfeldt, S.
Powiązania:
https://bibliotekanauki.pl/articles/99992.pdf
Data publikacji:
2017
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
compliant mechanism
parallel-driven feed axis
machine tool
control bandwidth
Opis:
Productivity enhancement is achievable by increasing the dynamics of machines. This can be accomplished by decreasing the moving mass or by increasing the driving forces. One possibility for increasing the drive forces lies in the use of multiple parallel-acting actuators. Because of the mechanical coupling between the drives, undesirable interference of the actuators occurs. This limits the control bandwidth of the feed axis. Feed axes of machine tools are mostly equipped with linear guides fitted with rolling elements. Since they dispose of just one degree of freedom, small errors in their alignment or thermally induced errors cause constraining loads. In this paper compliant mechanisms are used to mechanically decouple the slide from the guide and drive elements. The application of flexible joints in gantry axes with linear motors and ball screws is investigated. The dynamic behaviour of the feed axis components are modelled using the Finite Element Method. By applying the modal reduction technique, the dynamic behaviour is included in an elastic multibody simulation. With the mechanical decoupling of the drive and guide elements it is possible to increase the control bandwidth of the system. Deviations in motion may also be corrected with parallel-driven feed axis by applying compliant mechanisms.
Źródło:
Journal of Machine Engineering; 2017, 17, 2; 77-89
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Low-Field Magnetoresistance in Manganite Thin Films
Autorzy:
Vlakhov, E. S.
Dörr, K.-H
Müller, K.
Handstein, A.
Nenkov, K.
Walter, T.
Chakalov, R. A.
Chakalova, R. I.
Spasov, A. Y.
Powiązania:
https://bibliotekanauki.pl/articles/2013419.pdf
Data publikacji:
2000-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.70.Ak
73.50.Dn
Opis:
Grain boundaries play an important role in low-field magnetoresistance of La$\text{}_{0.7}$Ca$\text{}_{0.3}$MnO$\text{}_{3}$ and La$\text{}_{0.7}$Sr$\text{}_{0.3}$MnO$\text{}_{3}$ thin films deposited by magnetron sputtering and pulsed laser deposition on YSZ(100) and silicon substrates buffered by YSZ. Well-pronounced low-field magnetoresistance hysteresis was observed in magnetic fields applied in in-plane and out-of-plane directions. High values of local magnetoresistance sensitivity d(MR)/dH in the vicinity of the coercive field were obtained reaching up to 0.2%/Oe for La$\text{}_{0.7}$Ca$\text{}_{0.3}$MnO$\text{}_{3}$ samples at 5 K.zapis
Źródło:
Acta Physica Polonica A; 2000, 97, 5; 787-790
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Magnetic Stray Field Detection as Guidance for Electronic Transport Measurements in the B-T Phase Diagram of MnSi
Autorzy:
Pohlit, M.
Witt, S.
Akbari, M.
Krellner, C.
Müller, J.
Powiązania:
https://bibliotekanauki.pl/articles/1030531.pdf
Data publikacji:
2018-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
07.55.Ge
72.15.Eb
72.80.Ga
75.30.-m
Opis:
In order to advance modern information technologies, progress in both the fabrication of magnetic nanostructures and of complex materials, from which small magnetic entities - like the skyrmions present in MnSi - emerge and in developing measurement techniques are desired. Here the sensor-based stray field detection using tailor-made micro-Hall magnetometers has proven to be a versatile tool for studying the magnetization reversal of individual magnetic nanostructures, domain wall motion in thin films, as well as the local stray field close to macroscopic samples. In this article we demonstrate that the local stray field can be used to accurately map out the B-T phase diagram of MnSi and serve as a guidance for simultaneously-performed electronic transport measurements. The presented study also serves as a proof-of-principle experiment for future combined investigations of electronic transport and magnetization focusing on electrically-contacted magnetic nanostructures.
Źródło:
Acta Physica Polonica A; 2018, 133, 3; 582-584
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical simulation of the influence of a fillet and a bulb on the secondary flow in a compressor cascade
Autorzy:
Hoeger, M.
Schmidt-Eisenlohr, U.
Gomez, S.
Sauer, H.
Müller, R.
Powiązania:
https://bibliotekanauki.pl/articles/1986762.pdf
Data publikacji:
2002
Wydawca:
Politechnika Gdańska
Tematy:
secondary flow
compressor cascade
fillet
bulb
Opis:
Large fillet radii are typically found on highly loaded compressor rotors to ensure structural integrity. The objective of this paper is to investigate the impact of such real geometry effects on the flow at the hub section. Investigations were performed numerically for the idealised case of a plane compressor cascade with the 3D Navier-Stokes code TRACE_S. Realistic inlet boundary layer displacement thickness and typical loading levels close to stall are considered at low inlet Mach numbers Ma1 = 0.23. A large fillet with a relative radius of 16% chord length is considered as well as a 3D leading edge bulb-configuration designed at TU Dresden. The results are discussed in terms of iso-Mach surfaces, secondary flow patterns and spanwise incidence and turning. A complex 3D vortex system rises from the fillet radius, which improves the aerodynamic behaviour of the cascade at the end-wall section. With the bulb configuration the suction surface horse-shoe vortex leg was demonstrated to weaken the undesirable cross flow and by that to reduce the hazard of corner stall.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2002, 6, 1; 25-37
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Positronium for antihydrogen production in the AEGIS experiment
Autorzy:
Consolati, G.
Aghion, S.
Amsler, C.
Bonomi, G.
Brusa, R.
Caccia, M.
Caravita, R.
Castelli, F.
Cerchiari, G.
Comparat, D.
Demetrio, A.
Di Noto, L.
Doser, M.
Evans, C.
Fanì, M.
Ferragut, R.
Fesel, J.
Fontana, A.
Gerber, S.
Giammarchi, M.
Gligorova, A.
Guatieri, F.
Haider, S.
Hinterberger, A.
Holmestad, H.
Kellerbauer, A.
Khalidova, O.
Krasnicky, D.
Lagomarsino, V.
Lansonneur, P.
Lebrun, P.
Malbrunot, C.
Mariazzi, S.
Marton, J.
Matveev, V.
Mazzotta, Z.
Müller, S.
Nebbia, G.
Nedelec, P.
Oberthaler, M.
Pacifico, N.
Pagano, D.
Penasa, L.
Petracek, V.
Prelz, F.
Prevedelli, M.
Ravelli, L.
Rienaecker, B.
Robert, J.
Røhne, O.
Rotondi, A.
Sandaker, H.
Santoro, R.
Smestad, L.
Sorrentino, F.
Testera, G.
Tietje, I.
Widmann, E.
Yzombard, P.
Zimmer, C.
Zmeskal, J.
Zurlo, N.
Powiązania:
https://bibliotekanauki.pl/articles/1057954.pdf
Data publikacji:
2017-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
04.80.Cc
07.77.-n
36.10.Dr
78.70.Bj
Opis:
The primary goal of the Antihydrogen Experiment: Gravity, Interferometry, Spectroscopy (AEGIS) collaboration is to measure for the first time precisely the gravitational acceleration of antihydrogen, H̅, a fundamental issue of contemporary physics, using a beam of antiatoms. Indeed, although indirect arguments have been raised against a different acceleration of antimatter with respect to matter, nevertheless some attempts to formulate quantum theories of gravity, or to unify gravity with the other forces, consider the possibility of a non-identical gravitational interaction between matter and antimatter. We plan to generate H̅ through a charge-exchange reaction between excited Ps and antiprotons coming from the Antiproton Decelerator facility at CERN. It offers the advantage to produce sufficiently cold antihydrogen to make feasible a measurement of gravitational acceleration with reasonable uncertainty (of the order of a few percent). Since the cross-section of the above reaction increases with n⁴, n being the principal quantum number of Ps, it is essential to generate Ps in a highly excited (Rydberg) state. This will occur by means of two laser excitations of Ps emitted from a nanoporous silica target: a first UV laser (at 205 nm) will bring Ps from the ground to the n=3 state; a second laser pulse (tunable in the range 1650-1700 nm) will further excite Ps to the Rydberg state.
Źródło:
Acta Physica Polonica A; 2017, 132, 5; 1443-1449
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Priming through H2O2-mediated signalling in Arabidopsis thaliana
Autorzy:
Balazadeh, S.
Shahnejat-Bushehri, S.
Muller-Rober, B.
Powiązania:
https://bibliotekanauki.pl/articles/80697.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
conference
molecular mechanism
hydrogen peroxide
stress condition
transcription factor
Arabidopsis thaliana
signalling
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2013, 94, 2
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
R&D of novel medicinal materials for curing cancer: sugar modified Gd-DTPA MRI contrast agents and phospha sugar anti-cancer agents
Autorzy:
Yamashita, Y.
Yamashita, M.
Fujie, M.
Suyama, K. A. T.
Ito, S.
Reddy, V. K.
Yamada, M.
Ogawa, K.
Ozaki, N.
Nakamura, S.
Aoki, T.
Yu, G.
Aoshima, K.
Kato, T.
Kamikage, N.
Kiyofuji, K.
Takehara, Y.
Sakahara, H.
Takayanagi, H.
Oshikawa, T.
Laurent, S.
Burtea, C.
Van der Elst, L.
Muller, R. N.
Powiązania:
https://bibliotekanauki.pl/articles/385218.pdf
Data publikacji:
2009
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
MRI contrast agent
sugar-ball-dendrimer
Gd (III)-DTPA complex
phospha sugars
phospholanes
anticancer agent
tumor
Opis:
Novel Sugar Dendritic Gd-DTPA Complexes for MRI Contrast Agents were prepared and evaluated by in vitro and in vivo methods. The sugar dendritic MRI contrast agents have a good blood vesse pool character, and draw blood vessels and liver cancer remarkably clearer than the clinically using Gd-DTPA. Phospha sugar derivatives or phosphorus heterocyclic derivatives provided by functional groups such as epoxide, bromide, etc., were prepared and evaluated by MTT in vitro method. These phospha sugar derivatives showed excellent activities against leukemia cells as well as solid cancer cells in fashions of (i) higher activity, (ii) wider spectra, (iii) higher selectivity and specificity distingushing healthy and cancer cells, etc., compared with the molecular targeting chemotheraputic anti-cancer agent, Gleevec.
Źródło:
Journal of Automation Mobile Robotics and Intelligent Systems; 2009, 3, 4; 80-83
1897-8649
2080-2145
Pojawia się w:
Journal of Automation Mobile Robotics and Intelligent Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Real-time human in the loop MBS simulation in the Fraunhofer robot-based driving simulator
Symulacja w czasie rzeczywistym układu wieloczłonowego z człowiekiem w pętli w opartym na robocie symulatorze kierowania pojazdem opracowanym w Instytucie Fraunhofera
Autorzy:
Kleer, M
Gizatullin, A
Dreßler, K.
Müller, S.
Powiązania:
https://bibliotekanauki.pl/articles/139514.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
driving simulator
human in the loop
real-time MBS simulation
symulator jazdy
MBS
czas rzeczywisty
Opis:
The paper encompasses the overview of hardware architecture and the systems characteristics of the Fraunhofer driving simulator. First, the requirements of the real-time model and the real-time calculation hardware are defined and discussed in detail. Aspects like transport delay and the parallel computation of complex real-time models are presented. In addition, the interfacing of the models with the simulator system is shown. Two simulator driving tests, including a fully interactive rough terrain driving with a wheeled excavator and a test drive with a passenger car, are set to demonstrate system characteristics. Furthermore, the simulator characteristics of practical significance, such as simulator response time delay, simulator acceleration signal bandwidth obtained from artificial excitation and from the simulator driving test, will be presented and discussed.
Artykuł zawiera przeglĄd architektury sprzętowej i charakterystyk systemowych symulatora kierowania pojazdem opracowanego w Instytucie Fraunhofera. Na wstępie zdefiniowano i przedyskutowano szczegółowo wymagania dla modelu czasu rzeczywistego i obliczeń w czasie rzeczywistym. Zaprezentowano takie aspekty systemu, jak opóźnienie transportu i obliczenia równoległe złoŻonych modeli czasu rzeczywistego. Pokazano ponadto działanie interfejsu pomiędzy modelem i systemem symulatora. W celu zademonstrowania charakterystyk systemu wykonano dwa testy symulatora: w pełni interaktywny test kierowania koparkĄ kołowĄ w nierównym terenie, oraz test kierowania samochodem pasaŻerskim. Co więcej, charakterystyki symulatora majĄce znaczenie praktyczne, takie jak opóźnienie czasowe odpowiedzi symulatora, pasmo sygnału przyspieszenia symulatora wyznaczone przy sztucznym pobudzeniu i z testu kierowania pojazdem zostały zaprezentowane i przedyskutowane.
Źródło:
Archive of Mechanical Engineering; 2014, LXI, 2; 270-285
0004-0738
Pojawia się w:
Archive of Mechanical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sustainable increases of energy efficiency by holistically considered structures of factory systems
Autorzy:
Richter, C.
Fischer, S.
Neugebauer, R.
Müller, E.
Schädlich, K.
Powiązania:
https://bibliotekanauki.pl/articles/99737.pdf
Data publikacji:
2011
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
factory building
process
energy interaction
Opis:
A number of efficient solutions are already in existence today for reducing specific energy and raw material needs, and they are continuously being improved. Since the competition between individual solutions for sustained energy efficiency may prove to be an obstacle to the system as a whole, the interaction of individual elements and sub-systems in complex domains must be considered in an integrated way with an eye to their reciprocal energy effects. What will be the impact of energy savings resulting from innovative approaches and intelligent solutions at a single systemic level on the system as a whole? Do they serve to reduce overall energy costs? What kinds of energy-related information are necessary to answer these questions? This article examines the issue of how dedicated energy savings in the production sector impact on the total energy requirement in factory systems. In one example, process and building are examined together in order to thereby recognize energy relationships. It was demonstrate that waste heat from machine tools has a significant impact on the factory hall climate and therefore on the heating needs of factory buildings. A model calculation demonstrated that energy savings at individual system levels are transferable to the entire system in direct proportion to the energy efficiency of the building.
Źródło:
Journal of Machine Engineering; 2011, 11, No. 1-2; 11-22
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies