Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

English (EN)·Polski (PL)·Yкраїнський (UK)
Przejdź do strony domowej biblioteki Centralna Biblioteka Wojskowa Link otwiera się w nowym oknie Logo biblioteki Prolib Integro - strona głównaCentralna Biblioteka Wojskowa

Wyszukujesz frazę "Mohd, A." wg kryterium: Autor

  Lista filtrów
Wyrównaj
Wyświetlanie 1-15 z 26
Tytuł:
Thermal Insulation and Mechanical Properties in the Presence of Glas Bubble in Fly Ash Geopolymer Paste
Autorzy:
Shahedan, Noor Fifinatasha
Abdullah, Mohd Mustafa Al Bakri
Mahmed, Norsuria
Liew, Yun Ming
Shayfull, Zamree Abd Rahim
Aziz, Ikmal Hakem A.
Kadir, Aeslina Abdul
Sandu, Andrei Victor
Ghazali, Mohd Fathullah
Powiązania:
https://bibliotekanauki.pl/articles/2048833.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
glass bubble
thermal insulation
geopolymers
fly ash
Opis:
The density, compressive strength, and thermal insulation properties of fly ash geopolymer paste are reported. Novel insulation material of glass bubble was used as a replacement of fly ash binder to significantly enhance the mechanical and thermal properties compared to the geopolymer paste. The results showed that the density and compressive strength of 50% glass bubble was 1.45 g/cm3 and 42.5 MPa, respectively, meeting the standard requirement for structural concrete. Meanwhile, the compatibility of 50% glass bubbles tested showed that the thermal conductivity (0.898 W/mK), specific heat (2.141 MJ/m3 K), and thermal diffusivity (0.572 mm2 /s) in meeting the same requirement. The improvement of thermal insulation properties revealed the potential use of glass bubbles as an insulation material in construction material.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 1; 221-226
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of kenaf loading on kenaf/ABS composites structure and thermal properties
Autorzy:
Mashelmie, S.
Rabiatul Manisah, M.
Bahiyah Baba, N.
Mohd, A.
Powiązania:
https://bibliotekanauki.pl/articles/2172154.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
kenaf fibre
ABS
polymer composites
MFI
TGA
DSC
włókna kenafu
kompozyty polimerowe
wskaźnik szybkości płynięcia
analiza termograwimetryczna
skaningowa kalorymetria różnicowa
Opis:
Purpose Many manufacturers have recently become interested in using fiber-reinforced polymer composites (FRPs) in structural applications. Synthetic fibres, such as carbon and glass fibres, have been commercialised internationally for decades, but they cause environmental issues because synthetic fibres are non-biodegradable and difficult to recycle once they have served their purpose, potentially polluting the environment. Thus, natural fibre composites like kenaf is a possible replacement for synthetic fibre due to their superior physical and mechanical properties. Kenaf appears to be the best candidate for replacing synthetic fibres in order to accomplish the goal of environmental preservation while also displaying excellent properties such as equivalent specific strength, low density, and renewable resources. Design/methodology/approach The kenaf fiber was treated in KOH and added to ABS matrix to produce new composites at different loading (10, 15, 20 and 25 wt.%) by using Two Roll Mill machine. The influence of the fiber on the composites properties was evaluated. The produced material was subjected to SEM, MFI, TGA and DSC analysis. Findings The incorporation of the treated kenaf fiber has an influence on the properties of kenaf/ABS composites. The addition of 10 wt.% kenaf was found to be the best loading with MFI value, initial degradation temperature and glass transition temperature at 0.8208 g/10 min, 322.63°C and 130°C respectively. The fiber was well dispersed in the matrix and shown good adhesion to the ABS. The addition of treated fiber contribute to a reduction in the MFI, improved the thermal stability of the composites and typical effects of Tg of the composite compare to pure ABS. Research limitations/implications The results suggest the need to continue the study in order to further analyse higher kenaf loading and shed more light on the properties of the composites to improve understanding of kenaf/ABS composites. Originality/value Obtained results are a solution to alternative of synthetic fibers, which may contribute to the sustainable development of composites materials industry through the utilization of kenaf fiber with ABS matrix.
Źródło:
Journal of Achievements in Materials and Manufacturing Engineering; 2022, 111, 2; 49--56
1734-8412
Pojawia się w:
Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technology acceptance in learning history subject using augmented reality towards smart mobile learning environment : case in Malaysia
Autorzy:
Suhaimi, H.
Aziz, N. N.
Mior Ibrahim, E. N.
Wan Mohd Isa, W. A. R.
Powiązania:
https://bibliotekanauki.pl/articles/27314247.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
smart city education
mobile learning
augmented reality
history
technology acceptance model
Opis:
In alignment with smart city initiatives, Malaysia is shifting its educational landscape to a smart learning environment. The Ministry of Education (MoE) has made History a mandatory subject for passing the Malaysian Certificate of Education to grow awareness and instil patriotism among Malaysian students. However, History has been known as one of the difficult subjects to study for many students. On the other hand, the Malaysian Government Education Blueprint 2013-2025 seeks to “leverage ICT scale up quality learning” across the country. Therefore, this study aims to identify the factors that influence the intention to use Augmented Reality (AR) for mobile learning in learning History subject among secondary school students in Malaysia. Quantitative approach has been chosen as the research method for this study. A direct survey was conducted on 400 secondary school students in one of the smart cities in Malaysia as the target respondents. The collected data are analysed through descriptive statistics and Multiple Linear Regression analysis by using Statistical Package for the Social Sciences. Based on the results, the identified factors that influence the intention to use AR for mobile learning in learning History subject are Gender, Perceived Usefulness, Perceived Enjoyment, and Attitude Towards Use. The identified factors can be a good reference for schools and teachers to strategize their teaching and learning methods in pertaining to History subject among secondary school students in Malaysia. Future studies may include the study of various types of schools in Malaysia and explore more moderating effects of demographic factors.
Źródło:
Journal of Automation Mobile Robotics and Intelligent Systems; 2022, 16, 2; 20--29
1897-8649
2080-2145
Pojawia się w:
Journal of Automation Mobile Robotics and Intelligent Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
SYNTHESIS, AND EVALUATION OF COUMARIN HYBRIDS AS ANTIMYCOBACTERIAL AGENTS
Autorzy:
Hassan, Mohd Z.
ALSAYARI, ABDULRHMAN
OSMAN, HASNAH
ALI, MOHAMED A.
MUHSINAH, ABDULLATIF B.
AHSAN, MOHAMED J.
Powiązania:
https://bibliotekanauki.pl/articles/895509.pdf
Data publikacji:
2019-12-29
Wydawca:
Polskie Towarzystwo Farmaceutyczne
Tematy:
cytotoxicity
Coumarin
TB
Thiazolopyrimidine
HTS
antimycobacterial
Opis:
A series of twelve hybrid coumarin analogues were synthesized and screened through HTS for their antimycobacterial activity against Mtb H37Rv. The hybrid molecules were efficiently synthesized by the reactions of 3-(bromoacetyl)coumarin with Biginelli products 2-mercapto-6-oxo-4-aryl-1,6-dihydropyrimidine-5-carbonitriles. Of the resulting twelve hybrids, the two compounds 7-(2,4-dichlorophenyl)-5-oxo-3-(2-oxo-2H-chromen-3-yl)-5H-thiazolo[3,2-a] pyrimidine-6-carbonitrile (3d) and 7-(4-nitrophenyl)-5-oxo-3-(2-oxo-2H-chromen-3-yl)-5H-thiazolo[3,2-a]pyrimidine-6-carbonitrile (3f) showed excellent antimycobacterial activity against Mtb (EC50 3.19 & 7.91 µM, respectively) and low cytotoxicity against the VERO cell line (IC50 > 62.5 µg/mL).
Źródło:
Acta Poloniae Pharmaceutica - Drug Research; 2019, 76, 6; 1029-1036
0001-6837
2353-5288
Pojawia się w:
Acta Poloniae Pharmaceutica - Drug Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on potential of soil stabilization using concrete sludge of batching plant (CSBP)
Autorzy:
Nawi, Nur M.
Mat Yusof, Doris A.
Sharipudin, Siti S.
Mohd Halim, Nora F.
Mohamad, Nor M.
Powiązania:
https://bibliotekanauki.pl/articles/35554294.pdf
Data publikacji:
2022
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
CBR value
concrete sludge
organic soil
maximum dry density
subgrade
Opis:
More than 8 t of fresh concrete waste may be created and returned to the batching plants throughout Malaysia, where it will degrade into concrete sludge. Most batching plants will dump their concrete sludge on the ground or at a landfill which is not eco-friendly at all. Consequently, this study is to investigate the potential of concrete sludge of batching plant (CSBP) to be used as the stabilized material for organic soil which indirectly can help to recycle CSBP from end up at the landfill. The Atterberg limit test was conducted to identify the characteristic of soil used in this study. Four different percentages of CSBP were used which are 0, 5, 10 and 15%. Then, the standard Proctor test and California bearing ratio test were performed, and it shows that the CBR value remarkably increases from 4.8 to 20.7%, with the rise of CSBP percentages from 0 to 15%. The finding shows that CSBP can be used as the potential material to enhance the trend of strength value of CBR. Thus, using CSBP as a stabilized material for organic soil would alleviate the problem of overflowing landfills with concrete sludge and encourage a more sustainable approach in the construction industry.
Źródło:
Scientific Review Engineering and Environmental Sciences; 2021, 30, 4; 552-560
1732-9353
Pojawia się w:
Scientific Review Engineering and Environmental Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of Zeolite Phase Made from Rice Husk Ash and Sidrap Clay
Autorzy:
Armayani, M.
Mansur, Musdalifa
Asra, Reza
Irwan, Muh
Ramadhanty, Dhian
Subaer, Subaer
Abdullah, Mohd Mustafa Al Bakri
Aziz, Ikmal Hakem A.
Jeż, Bartłomiej
Nabiałek, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/2203746.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
autoclave
clay
rice husk ash
zeolite
Opis:
Zeolite has been successfully synthesized from clay and rice husk ash in the form of powder by using the hydrothermal method with variations in chemical compositions of alkaline solution and the amount of rice husk ash. The clay raw material was obtained from the Sidrap area of South Sulawesi and rice husk ash is obtained from the burning pile of rice husks. Sidrap clay and rice husk ash were activated using an alkaline solution of NaOH and varied rice husk ash and the addition of AlCl3. The addition of AlCl3, an alkaline solution of NaOH and H2O was used in the amount of 25.5 grams and variations of rice husk ash were 2.5 grams and 6.5 grams. Meanwhile, without the addition of AlCl3, an alkaline solution of NaOH and H2O was used for 20.5 grams and variations of rice husk ash from 2.5 grams and 6.5 grams. Then the mixture was then put into an autoclave with a temperature of 100°C for 3 hours. The basic material used in the manufacture of zeolite is carried out by X-ray Fluorescence (XRF) characterization to determine the constituent elements of basic material, which showed the content of SiO2 was 45.80 wt% in the clay and 93.40% in the rice husk ash. The crystalline structure of the zeolite formed was characterized by X-Ray Diffraction (XRD). It was found the resulting zeolite were identified as Zeolite-Y, Hydrosodalite, and ZSM-5. The microstructure properties of the resulting zeolite were determined by using Scanning Electron Microscopy (SEM).
Źródło:
Archives of Metallurgy and Materials; 2023, 68, 1; 269--274
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simultaneous Adsorption of Ternary Antibiotics (Levofloxacin, Meropenem, and Tetracycline) by SunFlower Husk Coated with Copper Oxide Nanoparticles
Autorzy:
Ibrahim, Mohammed A.
Shaban, Mohammed Ali A.
Hasan, Yaseen Rashid
M-Ridha, Mohanad J.
Hussein, Haitham A.
Abed, Khalid M.
Mohammed, Sabah J.
Muhamad, Mohd Hafizuddin
Hasan, Hassimi Abu
Powiązania:
https://bibliotekanauki.pl/articles/2105287.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
adsorption
antibiotics
neural network
wastewater
sustainable process
Opis:
In this study, a new adsorbent derived from sunflower husk powder and coated in CuO nanoparticles (CSFH) was investigated to evaluate the simultaneous adsorption of Levofloxacin (LEV), Meropenem (MER), and Tetracycline (TEC) from an aqueous solution. Significant improvements in the adsorption capacity of the sunflower husk were identified after the powder particles had been coated in CuO nanoparticles. Kinetic data were correlated using a pseudo-second-order model, and was successful for the three antibiotics. Moreover, high compatibility was identified between the LEV, MER, and TEC, isotherm data, and the Langmuir model, which produced a better fit to suit the isotherm curves. In addition, the spontaneous and exothermic nature of the adsorption process was crucial for transforming the three antibiotics into CSFH. The greatest CSFH adsorption capacity was in MER (131.83 mg/g), followed by TEC (96.95 mg/g), and LEV (62.24 mg/g). These findings thus indicate that CSFH is one of the most effective and efficient adsorbents to use for eliminating wastewater contaminated with antibiotic residue.
Źródło:
Journal of Ecological Engineering; 2022, 23, 6; 30--42
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Silica Bonding Reaction on Fly Ash Based Geopolymer Repair Material System with Incorporation of Various Concrete Substrates
Autorzy:
Al Bakri Abdullah, Mohd Mustafa
Aziz, Ikmal Hakem A.
Zailani, Warid Wazien Ahmad
Rahim, Shayfull Zamree Abd
Yong, Heah Cheng
Sandu, Andrei Victor
Peng, Loke Siu
Powiązania:
https://bibliotekanauki.pl/articles/2174557.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
fly ash geopolymer
repair material
concrete substrate
interfacial zone transition
Opis:
This paper presents an experimental investigation on the mechanical properties and microstructure of geopolymer repair materials mixed using fly ash (FA) and concrete substrates. An optimal combination of FA and concrete substrate was determined using the compressive test of geopolymer mortar mixed with various concrete substrate classes. It was found that the contribution of (C35/45) concrete substrates with the FA geopolymer mortar increases the 28-day bonding strength by 25.74 MPa. The microstructure analysis of the samples using scanning electron microscopy showed the denser structure owing to the availability of high calcium and iron elements distribution. These metal cations (Ca2+ and Fe3+) are available at OPC concrete substrate as a result from the hydration process reacted with alumina-silica sources of FA and formed calcium aluminate silicate hydrate (C-A-S-H) gels and Fe-bonding linkages.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 4; 1277--1281
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of Cadmium using Alkaline-Treated Activated Carbon from Leucaena Leucocephala Biomass
Autorzy:
Ibrahim, W. M. H. W.
Sulaiman, Nurul Syuhada
Amini, Mohd Hazim Mohammad
Kadir, W. R. A.
Mohamed, Mazlan
Ramle, Sitti Fatimah Mhd
Bilgin, Ugur
Rahman, Wan
Powiązania:
https://bibliotekanauki.pl/articles/2125550.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
activated carbon
cadmium
Leucaena leucocephala
adsorption
Opis:
Water contamination that caused by heavy metals is a very common phenomenon in the industrial age. One of the popular way to treat metal contaminated water is by adsorption process using activated carbon as the adsorbent. This paper works on producing activated carbon by chemical means with impregnation ratios of NaOH:char (w/w) was predetermined at 1:1 (ACT1-1), 2:1 (ACT2-1) and 3:1 (ACT3-1) under activation temperature of 700°C. Considering the Leucaena leucocephala is a wildly, easy and fast grown species, with the availability throught the year, it was chosen to be used as the precursor. The properties of these activated carbons and its potential for cadmium removal from aqueus solution was analyzed. It was found that the highest surface area was recorded at 662.76 m²/g. Four parameters were studied which are contact time, the effect of pH, initial concentration of adsorbate and temperature. The equilibrium time was achieved in 40 min treatment at initial concentrations of 30 mg/l. The adsorbent exhibited good sorption potential for cadmium at pH 8.0 and equilibrium temperature of 30℃. Based on the results, this study had proved that activated carbon from Leucaena leucocephala biomass have the good potential to be used for removal of cadmium from wastewater.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 3; 1033--1036
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation and performance in IR and UV of transparent inorganic polysiloxane coating with dispersed TiO2 on glass substrates
Autorzy:
Saudi, S. A.
Mohd, A. F.
Powiązania:
https://bibliotekanauki.pl/articles/2201066.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
transparent coatings
glass substrate
TiO2 dispersion
IR shielding
UV shielding
ultra-high shearing dispersion
powłoki przezroczyste
podłoże szklane
dyspersja
TiO2
ekranowanie
Opis:
Purpose The aim of the presented work was to develop an economical, transparent coating with dispersed TiO2 dispersion and inorganic polysiloxane resin for glass windows application and to study its effectiveness in filtering IR and UV radiations. Design/methodology/approach Two oligomeric silanes were prepared in different molar ratios to produce inorganic polysiloxane resin. They were tested for their viscosity to reflect the completion of the reaction and form an amide linkage. FTIR was done to support the viscosity result by proving the presence of amide linkages. 10%, 20%, and 30% of compounded TiO2 were successfully dispersed in 0.3% sodium sulfosalicylate (dehydrated ethanol). Each TiO2 concentration was characterized for size distribution and polydispersity index (PDI). Additives solutions of 2-hydroxybenzophenone (HBP) and boron trifluoride (BF3) were also soluted in the same solvent. Glass substrates were coated with the formulations and tested for curing and hardness properties. Windows Energy Profiler (WEP) was used to study the UV, IR, and daylight transmission of the coated glasses. Findings Each inorganic polysiloxane resin showed various viscosity values before reaching a constant state which designates complete formations of amide linkages. Polysiloxane resin with a viscosity value of 30.5 mPa/s was the most ideal to act as a binder. FTIR characterization proved the formation of amide linkages. The particle size distribution of TiO2 recorded the size of 87 nm after dispersion with correlating value of 1 PDI. The fastest drying time of 3 hours was recorded. The pencil hardness test quoted 6H pencil as the hardest pencil grade. WEP analysis of UV, IR, and daylight transmission gives satisfactory results of 0%, 7%, and 61%, respectively. Research limitations/implications Laboratory analysis for viscosity tests often being held off. The test requires the samples to be transferred in a cylinder with an open-air spindle rotation. Samples react with the surrounding environment. Thus, polymerization takes place rapidly, resulting in hardened samples inside the cylinder. The different measure was taken by wrapping the testing area with aluminium foil. This research was conducted under equatorial climate. Practical implications The obtained test results may contribute to the conclusion of transparent TiO2 nano-particles coating on glass substrates for windows application. This can reduce the electricity usage in buildings for artificial cooling to provide indoor thermal comfort. Smart coating formulations have a noticeable effect on filtering harmful solar radiation. Originality/value This study presents the economical and undemanding ways to develop transparent smart coating formulation with superior performance against solar radiation. It is expected to have a bright potential in the architectural industry.
Źródło:
Journal of Achievements in Materials and Manufacturing Engineering; 2022, 114, 2; 49--56
1734-8412
Pojawia się w:
Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Plastic filling simulation comparison analysis of the gating system in injection moulding parameter
Autorzy:
Umor, M. Z.
Mohd, A.
Efendee, A. M.
Khir, M.
Bahiyah Baba, N.
Powiązania:
https://bibliotekanauki.pl/articles/2201029.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
filling simulation
gating system
moulding parameters
symulacja
system bramkowania
parametry wtrysku
Opis:
Purpose: The paper is discussed the anticipation of the simulation software precision with the real moulding process by setting up the distinctive metering stroke separation. Design/methodology/approach: The Inventor CAD software was used to design the product experiment and perform the simulation by applying MoldFlow application to produce the processing parameter defining for the injection moulding machines. Findings: The results predicted by this filling simulation appears reasonable result as compared to the injected product. Prediction analysis given by the software is exceptionally valuable for the injection moulding parameter setting machines which can diminish the time of mould setup and can reduce the trial stage on the production line. Research limitations/implications: The gating system is the most crucial part in injection moulding process and the limitation is to get the accurate filling time and injection pressure to ensure the cavity is fully filled before the material at the gate solidify. Originality/value: Gating system configurations are utilized to optimize the filling conditions of injection moulding parts. This important element was developed for achieving product quality. The utilize of simulation software is exceptionally supportive in the model designing stage to predict the quality and process capacity for the product. This paper presents the filling simulation of the side gate system to the injection moulding parameter.
Źródło:
Journal of Achievements in Materials and Manufacturing Engineering; 2022, 112, 2; 64--69
1734-8412
Pojawia się w:
Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimisation of variation coolant system techniques in machining aluminium alloy Al319
Autorzy:
Zainal Ariffin, S.
Efendee, A. M.
Redhwan, A. A. M.
Alias, M.
Arifuddin, A.
Kamrol Amri, M.
Mohd Ali, M.
Khalil, K.
Aminullah, A. R. M.
Hasnain, A. R.
Baba, N. B.
Powiązania:
https://bibliotekanauki.pl/articles/2201047.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
aluminium alloy 319
coated cemented carbide Al2O3
surface roughness
response surface method
stop aluminium
węglik spiekany powlekany
chropowatość powierzchni
metoda powierzchni odpowiedzi
Opis:
Purpose Cutting parameters are often chosen for machining by machine operators in the industry. The experience and efficiency of the machine operator in producing a quality product are frequently used to decide parameter selection—low productivity results from improper parameter selection, inefficient machining, and technological issues. Today's key issues in the machining industry are focusing on increasing machining performance on surface roughness while minimising coolant usage. The study's objective is to enhance the performance of the nozzle lubrication system during the turning operation of an aluminium alloy 319 workpieces (Al319) to generate good surface roughness by applying turning parameters such as cutting speed, feed rate, and the depth of cut. Design/methodology/approach Response Surface Method (RSM) was used to create the experimental method for this investigation, carried out using a CNC lathe machine with two axial movements and a wet cooling nozzle with a size of 1.0 mm. Synthetic soluble lubricants, Al2O3-coated cemented carbide inserts, and Aluminium alloy 319 were utilised as cutting tools and workpiece materials. Findings To study the influence of cutting parameters on surface roughness, the Analysis of Variance (ANOVA) approach was utilised while the response surface method was performed to achieve an optimum machining performance (RSM). When comparing dry and wet cooling systems, the size of 1.0 mm nozzle shows appropriate surface roughness. According to the ANOVA analysis, the key factor impacting the surface roughness as machining performance in lubrication technique experiments was the utilisation of 1.0 mm nozzle size. Research limitations/implications The findings of combination machining parameters at a cutting speed of 270 m/min and a cutting depth of 0.60 mm at a feed rate of 0.08 mm/min offered the best results, achieving a surface roughness, Ra of 0.94 µm. Practical implications The use of coolant size nozzle 1.0 mm technology combined with the use of correct machining parameters can improve machining cuts. Originality/value The novel size of 1.0 mm nozzle in this current research is also valuable for reducing and increasing productivity in the machining business, as well as reducing dependency on machining operators' experience and abilities.
Źródło:
Journal of Achievements in Materials and Manufacturing Engineering; 2022, 113, 2; 72--77
1734-8412
Pojawia się w:
Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical properties of sugar palm yarn/woven glass fiber reinforced unsaturated polyester composites: effect of fiber loadings and alkaline treatment
Wpływ zawartości włókien i obróbki alkalicznej na właściwości mechaniczne kompozytów z nienasyconej żywicy poliestrowej wzmacnianych włóknem szklanym i włóknem palmy cukrowej
Autorzy:
Mohd Nurazzi, N.
Khalina, A.
Sapuan, S. M.
Ilyas, R. A.
Powiązania:
https://bibliotekanauki.pl/articles/947560.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
glass fiber
hybrid composites
mechanical properties
sugar palm fiber
yarn fiber
unsaturated polyester resin
włókno szklane
kompozyty hybrydowe
właściwości mechaniczne
włókno palmy cukrowej
włókno przędzy
nienasycona żywica poliestrowa
Opis:
In this paper, hybrid sugar palm yarn and glass fiber reinforced unsaturated polyester composites were investigated in relation to the effects of fiber loadings and alkaline treatment on the composite mechanical properties, such as tensile, flexural, impact and compression strength. The composites were fabricated at a weight ratio of matrix to reinforcement of 70 : 30 and 60 : 40, respectively, while the ratio of sugar palm yarn fiber to glass fiber was selected at 70 : 30, 60 : 40 and 50 : 50, respectively. The results revealed that the mechanical properties of the hybrid composites were increased with an increase of glass fiber loading for both 30 wt % and 40 wt % reinforcement content. The alkaline treatment of the sugar palm fibers have advantageous effect on the hybrid composite performance. The overall results indicated that the developed hybrid composites can be used as an alternative material for glass fiber reinforced polymer composites for various structural applications.
Zbadano wpływ zawartości włókien i ich obróbki alkalicznej na właściwości mechaniczne wzmacnianych włóknem szklanym kompozytów nienasyconej żywicy poliestrowej z włóknami palmy cukrowej. Oceniano wytrzymałość kompozytów na rozciąganie, zginanie, uderzenie i ściskanie. Wytworzone kompozyty zawierały 30 oraz 40% mas. włókien, przy stosunku masowym włókien palmy cukrowej do włókien szklanych 70/30, 60/40 i 50/50. Stwierdzono, że wytrzymałość mechaniczna kompozytów hybrydowych zwiększa się ze wzrostem zawartości włókna szklanego, a obróbka alkaliczna włókien palmy cukrowej wywiera korzystny wpływ na właściwości zawierających ją kompozytów hybrydowych. Uzyskane wyniki wskazują, że opracowane kompozyty hybrydowe mogą być stosowane jako materiał alternatywny dla kompozytów polimerowych wzmacnianych jedynie włóknem szklanym.
Źródło:
Polimery; 2019, 64, 10; 665-675
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Formulating delamination-fretting wear failure predictive equation in HAp coated hip arthroplasty using multiple linear regression model
Autorzy:
Nagentrau, M.
Ibrahim, N.H.
Jamian, S.
Mohd Tobi, A.L.
Powiązania:
https://bibliotekanauki.pl/articles/24200558.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
hip arthroplasty
delamination
fretting
HAp
regression
artroplastyka stawu biodrowego
rozwarstwienie
regresja
Opis:
Purpose: Present paper addresses the formulation of delamination-fretting wear failure predictive equation in HAp-Ti-6Al-4V interface of hip arthroplasty femoral stem component using multiple linear regression model. Design/methodology/approach: A finite element computational model utilising adaptive meshing algorithm via ABAQUS/Standard user subroutine UMESHMOTION is developed. The developed FE model is employed to examine effect of different HAp-Ti-6Al-4V interface mechanical and tribological properties on delamination-fretting wear behaviour. The FE result is utilised to formulate predictive equations for different stress ratio conditions using multiple linear regression analysis. Findings: Delamination-fretting wear predictive equations are successfully formulated with significant goodness of fit and reliability as a fast failure prediction tool in HAp coated hip arthroplasty. The robustness of predictive equations is validated as good agreement is noted with actual delamination-fretting wear results. Research limitations/implications: The influence of different mechanical and tribological properties such as delamination length, normal loading, fatigue loading, bone elastic modulus and cycle number under different stress ratio on delamination-fretting wear failure is analysed to formulate failure predictive equations. Practical implications: The formulated predictive equation can serve as a fast delamination-fretting wear failure prediction tool in hip arthroplasty femoral stem component. Originality/value: Limited attempt is done to explore the potential of utilizing multiple linear regression model to predict failures in hip arthroplasty. Thus, present study attempt to formulate delamination-fretting wear failure predictive equation in HAp -Ti-6Al-4V interface of hip arthroplasty femoral stem component using multiple linear regression model.
Źródło:
Archives of Materials Science and Engineering; 2022, 115, 2; 76--85
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Finite Element Analysis on Structural Behaviour of Geopolymer Reinforced Concrete Beam using Johnson-Cook Damage in ABAQUS
Autorzy:
Mortar, Nurul Aida Mohd
Al Bakri Abdullah, Mohd Mustafa
Hussin, Kamarudin
Razak, Rafiza Abdul
Hamat, Sanusi
Hilmi, Ahmad Humaizi
Shahedan, Noorfifi Natasha
Li, Long Yuan
Aziz, Ikmal Hakem A.
Powiązania:
https://bibliotekanauki.pl/articles/2174588.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
fly ash geopolymer
geopolymer concrete
finite element analysis
Johnson Cook Damage
ABAQUS software
Opis:
This paper details a finite element analysis of the behaviour of Si-Al geopolymer concrete beam reinforced steel bar under an impulsive load and hyper velocity speed up to 1 km/s created by an air blast explosion. The initial torsion stiffness and ultimate torsion strength of the beam increased with increasing compressive strength and decreasing stirrup ratio. The study involves building a finite element model to detail the stress distribution and compute the level of damage, displacement, and cracks development on the geopolymer concrete reinforcement beam. This was done in ABAQUS, where a computational model of the finite element was used to determine the elasticity, plasticity, concrete tension damages, concrete damage plasticity, and the viability of the Johnson-Cook Damage method on the Si-Al geopolymer concrete. The results from the numerical simulation show that an increase in the load magnitude at the midspan of the beam leads to a percentage increase in the ultimate damage of the reinforced geopolymer beams failing in shear plastic deformation. The correlation between the numerical and experimental blasting results confirmed that the damage pattern accurately predicts the response of the steel reinforcement Si-Al geopolymer concrete beams, concluded that decreasing the scaled distance from 0.298 kg/m3 to 0.149 kg/m3 increased the deformation percentage.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 4; 1349--1354
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Wyświetlanie 1-15 z 26

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies