Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Miedzińska, D." wg kryterium: Autor


Tytuł:
CO2 - CH4 sorption induced swelling of gas shales: An experimental study on the Silurian shales from the Baltic Basin, Poland
Autorzy:
Miedzińska, D.
Lutyński, M.
Powiązania:
https://bibliotekanauki.pl/articles/109897.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
shale rock
swelling
methane
carbon dioxide
sorption
Opis:
The main aim of the research presented in the paper was to study the phenomena of shale swelling induced by CH4 and CO2 sorption. In the study, a Silurian gas shale sample from the Baltic Basin in Poland was used. Samples represented typical characteristic features of polish shale gas formations with relatively low total organic carbon (0.8%) and high clay mineral content. The first part of the study was devoted to competitive adsorption of CO2 and CH4. The second part was devoted to observation of the sorption induced swelling phenomena, where sample linear strains were monitored with the use of strain gauges. Swelling tests were conducted up to the pressure of approximately 8 MPa with CO2, CH4 and helium as the baseline. Experimental results were compared with the Seidle and Huitt model where Langmuir constants where determined with volumetric sorption tests. Results of the study showed that matrix swelling in case of CO2 adsorption was greater than in the case of CH4 adsorption. The swelling value was directly proportional to adsorption and was about 5 to 10 times smaller than in the case of coal. Sorption of methane and carbon dioxide in the gas-bearing shale was about 10-times lower than in hard coals. The Seidle and Huitt model developed for coals was equally suitable to describe the processes of shale swelling.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 415-427
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energia z głębokich pokładów gorących suchych skał (HDR) do poprawy bezpieczeństwa infrastruktury krytycznej Polski
Autorzy:
Niezgoda, T.
Miedzińska, D.
Sławiński, G.
Powiązania:
https://bibliotekanauki.pl/articles/111049.pdf
Data publikacji:
2018
Wydawca:
Centrum Rzeczoznawstwa Budowlanego Sp. z o.o.
Tematy:
bezpieczeństwo energetyczne
energia
wydobycie ciepła
skały
infrastruktura krytyczna
energy security
energy
heat extraction
rocks
critical infrastructure
Opis:
W artykule przedstawiono zarys technologii wydobycia ciepła z głębokich pokładów gorących suchych skał (HDR – hot dry rocks), możliwości jej implementacji na terenie Polski oraz jej zalety w aspekcie zastosowania do poprawy bezpieczeństwa infrastruktury krytycznej, jak również poprawy bezpieczeństwa energetycznego Polski.
In the paper the scheme of technology of heat recovery from deep beds of hot dry rocks (HDR) and the possibilities of its applications in Poland were presented. Also the advantages of the HDR technology implementation in accordance to critical infrastructure safety improvement as well as for Poland energetic safety increase were shown.
Źródło:
Inżynieria Bezpieczeństwa Obiektów Antropogenicznych; 2018, 3-4; 65-69
2450-1859
2450-8721
Pojawia się w:
Inżynieria Bezpieczeństwa Obiektów Antropogenicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental research on influence of gas impact on thermal and mechanical properties of auxetic material covered with titanium silicide coating
Autorzy:
Miedzińska, D.
Gieleta, R.
Małek, E.
Zasada, D.
Stankiewicz, M.
Marszałek, K.
Powiązania:
https://bibliotekanauki.pl/articles/201182.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ti-Si layers
damage
impact
thermal resistance
SEM
auxetic materials
Ti-Si
uszkodzenia
uderzenia
opór cieplny
materiały auksetyczne
Opis:
The aim of the presented work was to study the auxetic textiles covered with titanium silicide coating. The research was carried out to develop the material structure, which will be used for protective clothing, e.g. for firemen. The new material should be characterized by increased heat resistance coupled with protection against gas pressure impact caused e.g. by gas installation damage. In the paper, an assessment of the change in heat resistance properties of a Ti-Si coated auxetic textile loaded with gas pressure impulse was carried out.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2018, 66, 2; 165-172
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
FEM analysis of proppant sticking in rock cracks
Analiza MES wciskania proppantu w pęknięcie skalne
Autorzy:
Kwietniewski, M.
Miedzińska, D.
Niezgoda, T.
Powiązania:
https://bibliotekanauki.pl/articles/231026.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
analiza MES
proppant
skała łupkowa
pęknięcie
szczelinowanie
kontakt
Newmark
FEM analysis
shale rock
crack
fracturing
contact
Opis:
The problem of effective gas extraction from Polish shale rocks is an interesting research subject for scientists. A properly selected proppant, which protects cracks from closing during the fracturing process, inestimably contributes to an increase of extraction. Grains of proppant are transported along with a fracturing medium to reach the deepest regions of the crack. The proper support of the crack provides an easy flow of gas, therefore it is important in terms of extraction efficiency. This paper shows the interactions of a proppant grain with the crack surface in shale rock. FEM analysis was conducted to observe the stress region, which is generated as a result of pressing the grain into the crack surface. A model of a sphere which was pressed into the rock model with constant velocity was applied. The received results of stress depend on material properties and a range of proppant grain pressing.
Terytorium Polski od kilku lat jest obiektem wzmożonych badań mających na celu opracowanie opłacalnej technologii wydobycia gazu z łupków. Polskie skały łupkowe różnią się pod względem fizycznym i chemicznym od tych występujących w Ameryce Północnej, są rozlokowane również na innej głębokości. Inna budowa skały stawia zatem nowe wyzwania dla wiertnictwa otworowego. Procesy szczelinowania zachodzą w nieco inny sposób, zatem konieczne jest opracowanie nowej technologii wydobycia. Jednym z ważniejszych aspektów tych badań jest dokładna analiza zachowania się skały obciążonej ciśnieniem szczelinowania. Do rozważenia jest tu mechanizm powstawania i propagacji pęknięcia oraz optymalny sposób podparcia szczeliny po zabiegu szczelinowania. Tę funkcję mają pełnić proppanty, które dostają się do złoża wraz z czynnikiem szczelinującym. Ziarenka, najczęściej ceramiczne o dużej twardości mają za zadanie zaklinować się w skale, aby utworzyć maksymalne rozwarcie szczeliny. Oczywiście, przy ogromnych naprężeniach wewnętrznych górotworu nastepuje wgniatanie ziaren w powierzchnię skały, co powoduje zmniejszenie przekroju poprzecznego szczeliny, a w skrajnych przypadkach może prowadzić do całkowitego zamknięcia szczeliny. Do analizy MES opracowano model geometryczny. Przyjęto, że model skały to czwarta część walca ze szczeliną w środkowej częćci o promieniu 1 mm. Wygenerowano model skały łupkowej o promieniu 8 mm oraz długości 10 mm. Analogicznie do modelu skały, przyjęto ziarenko proppantu jako 1/4 kuli. Dyskretyzację modelu przeprowadzono w oprogramowaniu LS – PrePost za pomocą elementów ośmiowęzłowych. Utworzony model składa się z 29554 elementów oraz 60696 węzłów.
Źródło:
Archives of Civil Engineering; 2018, 64, 2; 55-65
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania eksperymentalne wpływu dwutlenku węgla na strukturę porowatą i właściwości mechaniczne skały łupkowej
Experimental study on influence of carbon dioxide on porous structure and mechanical properties of shale rock
Autorzy:
Miedzińska, D.
Powiązania:
https://bibliotekanauki.pl/articles/210249.pdf
Data publikacji:
2017
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
geomechanika
skały łupkowe
dwutlenek węgla
geomechanics
shale rock
carbon dioxide
Opis:
Skały łupkowe są formacjami geologicznymi, może w nich występować materia organiczna, dzięki której mogą powstać niekonwencjonalne złoża gazu. Podczas ich interakcji z dwutlenkiem węgla, który może być stosowany jako czynnik szczelinujący do wydobycia gazu, zachodzi wiele zjawisk mających wpływ na strukturę i parametry wytrzymałościowe skały. W pracy przedstawiono badania zmian struktury skały łupkowej pod wpływem oddziaływania dwutlenku węgla w stanie nadkrytycznym oraz ich wpływ na właściwości wytrzymałościowe skały. Badania strukturalne zostały przeprowadzone przy użyciu technik mikroskopowych przy różnych powiększeniach obrazu. Jako test właściwości wytrzymałościowych przyjęto próbę jednoosiowego ściskania. W wyniku prac zaobserwowano pewną zależność. Im bardziej zmniejszyła się porowatość badanej próbki po infiltracji dwutlenkiem węgla w małych powiększeniach, tym bardziej zwiększyła się jej porowatość w dużych powiększeniach i tym mniejszą osiągnęła wytrzymałość na jednoosiowe ściskanie.
Shale rocks are geological formations which can be unconventional gas reservoirs. During their interaction with carbon dioxide, which can be used as a fracturing fluid in shale gas recovery process, many phenomena take place that can influence rock structure and mechanical properties. The research on changes in rock structure under super critical carbon dioxide interaction and their influence of shale properties were presented in the paper. The structural tests were carried out with the use of microscopic techniques with different resolutions of visualization. The uniaxial compression test was applied as a mechanical properties’ assessment experiment. As a result of research, some dependence was observed. The bigger decrease was in porosity after infiltration in lower zooms, the bigger increase in porosity in high zooms and mechanical properties was noticed.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2017, 66, 4; 167-178
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Laboratory hydraulic fracturing tests of rock samples with water, carbon dioxide, and slickwater
Szczelinowanie hydrauliczne próbek skalnych za pomocą wody, ditlenku węgla oraz „slickwater”
Autorzy:
Stanisławek, S.
Kędzierski, P.
Miedzińska, D.
Powiązania:
https://bibliotekanauki.pl/articles/230264.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
szczelinowanie hydrauliczne
stanowisko do szczelinowania
wytrzymałość na rozciąganie
skała
woda
ditlenek węgla
slickwater
hydraulic fracturing
fracturing test stand
tensile strength
rock
water
carbon dioxide
Opis:
Hydraulic fracturing of rocks boosts the production rate by increasing the fracture-face surface area through the use of a pressurized liquid. Complex stress distribution and magnitude are the main factors that hinder the use of information gathered from in situ hydraulic fracturing in other locations. Laboratory tests are a good method for precisely determining the characteristics of these processes. One of the most important parameters is breakdown pressure, defined as the wellbore pressure necessary to induce a hydraulic fracture. Therefore, the main purpose of this investigation is to verify fracture resistance of rock samples fractured with the assistance of the most popular industry fluids. The experiments were carried out using a stand designed specifically for laboratory hydraulic fracturing. Repeatable results with a relative error within the range of 6-11% prove that the experimental methodology was correct. Moreover, the obtained results show that fracturing pressure depends significantly on fluid type. In the case of a water test, the fracturing pressure was 7.1±0.4MPa. A similar result was achieved for slickwater, 7.5±0.7MPa; however, a much lower value (4.7±0.5MPa) was registered in the case of carbon dioxide.
Szczelinowanie hydrauliczne polega na niszczeniu skały za pomocą płynu pod wysokim ciśnieniem w celu zwiększenia powierzchni spękań, co poprawia wydajność produkcyjna. Rozkład naprężenia w górotworach i jego wielkoś jest zwykle relatywnie skomplikowana, a to utrudnia wykorzystanie informacji zgromadzonych w trakcie procesu szczelinowania w innej lokalizacji. Przy tym zwykle prace prowadzone są na dużym obszarze, a znaczna część instalacji znajduje się pod ziemią. W efekcie wiedza na temat warunków, w których przeprowadzono proces jest zwykle ograniczona. Dlatego próby laboratoryjne stanowią dobrą metodę weryfikacji parametrów procesu. Jedną z najistotniejszych wielkości jest ciśnienie szczelinowania niezbędne do wytworzenia spękań. Decyduje ono zarówno o parametrach instalacji szczelinującej jak i ma wpływ na aktywność sejsmiczną obszaru. W literaturze istnieją wzory pozwalające szacować wielkość ciśnienia szczelinującego, jednak nie uwzględniają one roli płynu szczelinującego. Najpopularniejszym medium szczelinującym stosowanym w przemyśle jest woda, często domieszkowana specjalnymi dodatkami redukującymi tarcie. W górotworach o szczególnie zwartej budowie stosuje się zwykle ditlenek węgla lub azot. Dotychczasowe badania nad wpływem płynu szczelinującego na wielkość ciśnienia miały ograniczony charakter. Ze względu na ten fakt praca podejmuje to zagadnienie.
Źródło:
Archives of Civil Engineering; 2017, 63, 3; 139-148
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of influence of temperature on wellbore tubing dimensions
Autorzy:
Kwietniewski, M.
Miedzińska, D.
Niezgoda, T.
Małek, E.
Powiązania:
https://bibliotekanauki.pl/articles/241587.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
wellbore
tubing
heat
thermal extension
pipe
steel P110
thermal analyses
finite element method
Opis:
The construction of exploitation wellbore is complex, it consists of several columns of pipelines which perform different tasks. It is very important to preclude flow of reservoir fluid between wellbore and ground. Tubing is a kind of a pipeline which is very important element of oil and gas wellbore construction. It allows to transport fracturing medium between wellbore station and underground deposit. Manufacture quality and correct mounting of tubing in the wellbore are the key for effective exploitation. However, during work those pipes are subjected to changeable loads which results in temperature value changes for example. That temperature variations can be caused by cold medium transport inside the pipe. In the paper, analyses of influence of temperature value changes on the tubing shrinkage were presented. Numerical analyses of section of pipe vertically located in the wellbore and loaded with changeable temperature were carried out. The calculations were made with the use of coupled structural and thermal analyses. Received results of tubing shrinkage for fragment of pipe were adapted to the column of pipes of 3000 m length. Results of numerical analyses were verified with the analytical calculations. Material of tubing was assumed as steel P110 which is often applied in the wellbore construction.
Źródło:
Journal of KONES; 2016, 23, 4; 269-273
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Methods of CO2 acquisition and costs reduction in shale rocks fracturing technology
Autorzy:
Miedzińska, D.
Niezgoda, T.
Powiązania:
https://bibliotekanauki.pl/articles/299042.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
fracturing
shale gas
carbon dioxide
economics
Opis:
The innovative method of shale gas recovery with the use of subcritical CO2 is currently developed within the project titled “Development of guidelines for design of innovative technology of shale gas recovery with the use of liquid CO2 on the base of numerical and experimental research – DIOX4SHELL ”, supported by the National Centre for Research and Development (NCBR). The project is carried out by Polish company PGNiG and by academics from WAT, AGH and PW (Military University of Technology, AGH University of Science and Technology, and Warsaw University of Technology). Finding the best business model, in which costs of CO2 production or acquisition are negligible is one of the most important factors influencing the economical effectiveness of the technology. The main part of known CO2 acquisition methods is based on fuel purchase and its combustion, what is very expensive process. It results with the high CO2 price, when purchasing from producer, about 300 zl/ton. This price is quite high, considering current low prices of natural gas. In the paper basic aspects of CO2 acquisition from CO2 producers, exhaust gases treatment plants or plasma gasification methods will be presented.
Źródło:
AGH Drilling, Oil, Gas; 2016, 33, 1; 11-22
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Overview of issues related to mixing CO2 and proppant in the method of gas extraction from shale rocks
Autorzy:
Niezgoda, T.
Miedzińska, D.
Stanisławek, S.
Kwietniewski, M.
Powiązania:
https://bibliotekanauki.pl/articles/298655.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
carbon dioxide
proppant
gas
shale
Opis:
To increase the efficiency of fracturing process, proppant materials are added to fracking fluid. This admixture allows to keep developed fracks, that tend to lock, opened. The aim of this overview is to present methods of carbon dioxide and proppant mixing. The most often applied methods are as follows: special medium admixing, direct proppant with CO2 mixing. Liquid CO2 and proppant blenders are currently commercially used, but are not very popular.
Źródło:
AGH Drilling, Oil, Gas; 2016, 33, 2; 307-313
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on heat flow in granite sample using thermal imaging camera
Autorzy:
Małek, E.
Miedzińska, D.
Niezgoda, T.
Stankiewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/242569.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
thermovision
thermal imaging camera
temperature distribution
granite
aluminum foam sample
heat flow
Opis:
Research on heat flow in granite sample and sample of aluminium foam with the use of a thermal imaging camera is presented in the paper. Temperature distribution on the surface of the sample as a function of time was obtained on the basis of data from the thermal imaging camera. Thermovision is one of the most universal technology, which is applied for detection of infrared radiation. This technique allows observing and record infrared radiation emitted by objects located in the surrounding environment. This technology allows obtaining, in a short time, temperature distribution on the surface of the sample. The thermograms (pictures showing on the surface of the object) are types of photos showing temperature distribution on the tested object surface which is achieved on the base of a specified range of electromagnetic radiation. Accurate measurement of the temperature distribution on the heated granite sample surface was obtained using a thermal imaging camera FLIR SC 6000. Thermal imaging camera was connected to the computer equipped with control software FLIR ResearchIR Max. Heat source was applied in the experiment as a cast iron hotplate with high efficiency heating, gradual control and 1500W power. Obtained results showed regular temperature distribution over the surface of researched sample.
Źródło:
Journal of KONES; 2016, 23, 4; 327-333
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental and analytical research on resonance phenomena of vibrating head with MRE regulating element
Autorzy:
Miedzińska, D.
Gieleta, R.
Osiński, J.
Powiązania:
https://bibliotekanauki.pl/articles/265035.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
vibratory pile hammer
resonance
vibrations
Fourier analysis
analiza Fouriera
wibracje
rezonans
Opis:
A vibratory pile hammer (VPH) is a mechanical device used to drive steel piles as well as tube piles into soil to provide foundation support for buildings or other structures. In order to increase the stability and the efficiency of the VPH work in the over-resonance frequency, a new VPH construction was developed at the Military University of Technology. The new VPH contains a system of counter-rotating eccentric weights, powered by hydraulic motors, and designed in such a way that horizontal vibrations cancel out, while vertical vibrations are transmitted into the pile. This system is suspended in the static parts by the adaptive variable stiffness pillows based on a smart material, magnetorheological elastomer (MRE), whose rheological and mechanical properties can be reversibly and rapidly controlled by an external magnetic field. The work presented in the paper is a part of the modified VPH construction design process. It concerns the experimental research on the vibrations during the piling process and the analytical analyses of the gained signal. The results will be applied in the VPH control system.
Źródło:
International Journal of Applied Mechanics and Engineering; 2015, 20, 1; 201-208
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical investigations on vibrating motion with inertial load of vibratory pile hammer stiffly coupled with excavator
Autorzy:
Osiński, J.
Miedzińska, D.
Powiązania:
https://bibliotekanauki.pl/articles/247648.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
elastomer
vibrations
simulation
resonance
numerical analysis
Opis:
A vibratory pile hammer (VPH) is a mechanical device used to drive steel piles as well as tube piles into soil to provide foundation support for buildings or other structures. In order to increase the stability and the efficiency of the VPH work in the over-resonance frequency, a new VPH construction was developed in the Military University of Technology. The new VPH contains a system of counter-rotating eccentric weights, powered by hydraulic motors, and designed in such a way that horizontal vibrations cancel out, while vertical vibrations are transmitted into the pile. This system is suspended in the static parts by the adaptive variable stiffness pillows based on a smart material, magnetorheological elastomer (MRE), which rheological and mechanical properties can be reversibly and rapidly controlled by an external magnetic field. The work presented in the paper is a part of the modified VPH construction design process. It concerns the development of the numerical model of the VPH and soil interaction that will describe resonance conditions, resonance frequencies with consideration of soil susceptibility, coupling phenomenon and elastomer changeable stiffness. On the base of developed theoretical equations, the frequency of VPH piling will be regulated to assure the over-resonance work.
Źródło:
Journal of KONES; 2014, 21, 1; 189-195
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of coal structure in the aspect of gas content
Autorzy:
Niezgoda, T.
Miedzińska, D.
Małek, E.
Powiązania:
https://bibliotekanauki.pl/articles/298731.pdf
Data publikacji:
2013
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
carbon dioxide
methane
porosity of coal
Opis:
The problem of methane existence in coal beds has been known for many years. It was and still is a danger to coalminers. The aim of the research presented in the paper is to show and assess the porosity structure (especially micro and nanoporosity) in accordance to the dimensions of carbon dioxide particle. The characteristic surface morphology of the sample and the disclosure of carbon porous structure was obtain using the scanning electron microscope (SEM). The presented study of the coal microstructure is a part of the coal demethanation method with the use of liquid CO2, that was proposed by Military University of Technology. Based on the results of laboratory tests may be noted that the analyzed coal has a granular structure. It is also visible that that the structure is stratified, and there is a lot of cracks and free space between grains, which can accumulated methane in coal structure. The nanoporosity of the coal grains was observed during SEM study. The sizes and shapes of pores are miscellaneous. However the dimension of 62-300 nm allow to draw a conclusion, that the nanopores can contain a few particles of CH4 (4 A), which can be released by the CO2 particle (2.54 A). Finally, on the base of presented research it can be concluded that the method of coal demethanation with the use of CO2 can be economically and ecologically effective, and can increase the miners safety.
Źródło:
AGH Drilling, Oil, Gas; 2013, 30, 1; 169-179
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Carbon dioxide geosequestration method coupled with shale gas recovery
Autorzy:
Niezgoda, T.
Małek, E.
Miedzińska, D.
Powiązania:
https://bibliotekanauki.pl/articles/298651.pdf
Data publikacji:
2013
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
shale gas
carbon dioxide
geosequestration
Opis:
Shale gas in the United States over the past decade, and interest has spread to potential gas shales in Canada, Europe, Asia, and Australia. One analyst expects shale gas to supply as much as half the natural gas production in North America by 2020. Carbon dioxide capture and storage (CCS) is a set of technologies for the capture of CO2 from its anthropogenic point sources, its transport to a storage location, and its geosequestration. This is only one, though very important, option in a portfolio of actions to fight the increase of atmospheric CO2 concentration and to mitigate climate change, while at the same time allowing for the continued use of fossil fuels. Deployment of CCS technologies is expected to be limited in the next 5-10 years, but to contribute significantly to the reduction of CO2 emissions 20 years from now. Capture of CO2 using existing separation techniques can be applied to large point sources, i.e. power plants or industrial plants; CO2 can be easily transported over large distances using pipelines and ships; finally CO2 can be permanently stored in suitable deep geological formations, namely deep saline aquifers, oil or gas reservoirs, and unmineable coal seams, or it can be fixed in carbonates. The paper deals with the innovative method of carbon dioxide storage coupled with gas shale fracturing and methane recovery developed in the Military University of Technology. It allows to effectively mine the shale gas and to store carbon dioxide in shale rock. It must be noticed that CO2 pollution is a very important problem in Poland, because of European Union CO2 limits. Also carbon dioxide thermodynamic process of decompression numerical calculation, which simulates the injection of the cold liquid gas into the shale formation (high temperature and pressure conditions) and its influence on shale rock fracturing as well as initial experimental verification of the method was presented in the paper.
Źródło:
AGH Drilling, Oil, Gas; 2013, 30, 1; 161-167
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on carbon dioxide thermodynamic behavior for the purpose of shale rock fracturing
Autorzy:
Niezgoda, T.
Miedzińska, D.
Małek, E.
Kędzierski, P.
Sławiński, G.
Powiązania:
https://bibliotekanauki.pl/articles/201878.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
carbon dioxide
shale gas
storage system
thermodynamics
FEM
Opis:
The possibility of using CO2 to fracturing a shale rock has been presented in the paper. The described innovative method which allows for the efficient extraction of shale gas and carbon dioxide storage in a shale rock was developed in Department of Mechanics and Applied Computer Science at the Military University of Technology, Warsaw, Poland. Firstly, the method was verified on the base of analytical and experimental research. In the next stage of the method verification carbon dioxide thermodynamic behavior was studied. The growth in pressure of drop of CO2 heated in a closed volume was numerically tested. The research confirmed the efficiency of the use of carbon dioxide as a medium for fracturing of rocks. The usage of liquid CO2 can be alternative for hydraulic fracturing and is safe for the environment.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2013, 61, 3; 605-612
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies