- Tytuł:
- Effect of Si and Fe on the Recrystallization Response of Al-Mn Alloys with Zr Addition
- Autorzy:
-
Karlík, M.
Mánik, T.
Slámová, M.
Lauschmann, H. - Powiązania:
- https://bibliotekanauki.pl/articles/1418443.pdf
- Data publikacji:
- 2012-09
- Wydawca:
- Polska Akademia Nauk. Instytut Fizyki PAN
- Tematy:
-
81.40.-z
81.05.Bx
81.70.-q - Opis:
- Al-Mn alloys are often used for the production of automotive heat exchanger fins. During brazing at about 600°C, recrystallization and grain coarsening resulting in the reduction of the strength and possible buckling of the fin can occur. In order to obtain a good recrystallization resistance, the alloy should contain a dense and homogeneous distribution of second phase particles. The effect of Si and Fe addition on the recrystallization response of Al-Mn-Zr alloys direct-chill cast in the laboratory conditions and twin-roll cast in the industrial conditions was examined. Microstructure of the alloys was characterized during downstream processing. The particles were analyzed by light metallography, energy dispersive X-ray spectroscopy and by means of electron backscattering diffraction. Computer assisted quantitative particle analysis was carried out on field emission gun-scanning electron microscope micrographs. Vickers hardness and electrical conductivity were measured at thicker sheets, while at the final gauge of 65 μm the 0.2% proof stress was evaluated. The best recrystallization resistance had twin-roll cast alloy containing 0.5 wt% Si and 0.2 wt% Fe.
- Źródło:
-
Acta Physica Polonica A; 2012, 122, 3; 469-474
0587-4246
1898-794X - Pojawia się w:
- Acta Physica Polonica A
- Dostawca treści:
- Biblioteka Nauki