Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Lu, Yang" wg kryterium: Autor


Tytuł:
Vibration transients of reservoir-pipe-valve system caused by water hammer
Autorzy:
Miao, Yang
Jiang, Yuncheng
Qiu, Zaihui
Pan, Jun
Wang, Lu
Han, Zhenrong
Li, Kun
Zhang, Li
Zhang, Xiaolu
Powiązania:
https://bibliotekanauki.pl/articles/1839616.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
reservoir-pipe-valve system (RPV system)
water hammer
vibration
transients
Opis:
A severe oscillation, accompanied with an abnormal “click” sound, of a fuel feeding pipe system during valve closing, when the feeding flowrate reaches a certain value, is observed experimentally. A fluctuation model in which stiffness and damping coefficients of the vibration system are time varying is proposed. Each coefficient is composed of two parts, one of which is constant and the other is time varying. Based on this model, simulation transients of the vibration displacement, velocity and pressure in the pipe are presented. Simulations of the pressure transients are compared with experimental data detected by pressure transducer, which shows that both have fluctuations in the transient process at a large flowrate.
Źródło:
Journal of Theoretical and Applied Mechanics; 2020, 58, 4; 1037-1048
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Three-dimensional biomechanical modeling and simulation of trephine cutting cornea for keratoplasty
Autorzy:
Su, P.
Lu, D.
Deng, S.
Zhang, L.
Hao, Y.
Yang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/307486.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
rogówka
biomechanika
kryterium wytężeniowe
FEM
cornea
biomechanics
failure criterion
finite element simulation
Opis:
Trephination is one of the basic operations of keratoplasty, and the biomechanical mechanism of the operation can be revealed based on three-dimensional modeling and simulation of trephine cutting cornea. Methods: Based on the analysis of the physical and biomechanical characteristics of corneal trephination, a three-dimensional numerical model of corneal trephination is built, where the cornea can be simplified to two layers structure including stroma and epithelium, and the trephine cuts the cornea under the vertical motion load and the rotational motion load. A three-dimensional failure criterion of corneal material is proposed based on the yield strength theory. On this basis, trephination simulation is carried out, and the units of corneal material are removed from the model when they meet the defined failure criterion. Results: Under the given parameters including the velocity, the angle and the angular velocity, the trephine force curves, include the linear cutting force and the rotary cutting force are obtained, and show the change of the forces with displacement during the process of trephination simulation. The maps of the equivalent stress show the destruction and deformation of the cornea. Then, the experiment of robotic trephination is carried out under the same parameters and the effectiveness of the simulation is evaluated. Conclusions: Based on mechanics theory and finite element method, the process of trephine cutting cornea has been reproduced, and the interaction mechanism is revealed, which lays the foundation for the development of real-time simulation and virtual system of the corneal surgery.
Źródło:
Acta of Bioengineering and Biomechanics; 2018, 20, 2; 23-33
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The local versions of $H^p(ℝ^n)$ spaces at the origin
Autorzy:
Zhen Lu, Shan
Yang, Da
Powiązania:
https://bibliotekanauki.pl/articles/1388598.pdf
Data publikacji:
1995
Wydawca:
Polska Akademia Nauk. Instytut Matematyczny PAN
Opis:
Let 0 < p ≤ 1 < q < ∞ and α = n(1/p - 1/q). We introduce some new Hardy spaces $HK̇_q^{α,p}(ℝ^n)$ which are the local versions of $H^p(ℝ^n)$ spaces at the origin. Characterizations of these spaces in terms of atomic and molecular decompositions are established, together with their φ-transform characterizations in M. Frazier and B. Jawerth's sense. We also prove an interpolation theorem for operators on $HK̇_q^{α,p}(ℝ^n)$ and discuss the $HK̇_q^{α,p}(ℝ^n)$-boundedness of Calderón-Zygmund operators. Similar results can also be obtained for the non-homogeneous Hardy spaces $HK_q^{α,p}(ℝ^n)$.
Źródło:
Studia Mathematica; 1995, 116, 2; 103-131
0039-3223
Pojawia się w:
Studia Mathematica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Littlewood-Paley function and φ-trans-form characterizations of a new Hardy space HK₂ associated with the Herz space
Autorzy:
Lu, Shanzhen
Yang, Dachun
Powiązania:
https://bibliotekanauki.pl/articles/1293317.pdf
Data publikacji:
1992
Wydawca:
Polska Akademia Nauk. Instytut Matematyczny PAN
Opis:
We give a Littlewood-Paley function characterization of a new Hardy space HK₂ and its φ-transform characterizations in M. Frazier & B. Jawerth's sense.
Źródło:
Studia Mathematica; 1991-1992, 101, 3; 285-298
0039-3223
Pojawia się w:
Studia Mathematica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Supervisory fault tolerant control with integrated fault detection and isolation: a switched system approach
Autorzy:
Yang, H.
Jiang, B.
Cocquempot, V.
Lu, L.
Powiązania:
https://bibliotekanauki.pl/articles/331374.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
sterowanie tolerujące uszkodzenia
detekcja uszkodzeń
lokalizacja uszkodzeń
sterowanie rozdzielcze
układ komutowany
fault-tolerant control
fault detection
fault isolation
switching control
switched systems
Opis:
This paper focuses on supervisory fault tolerant control design for a class of systems with faults ranging over a finite cover. The proposed framework is based on a switched system approach, and relies on a supervisory switching within a family of pre-computed candidate controllers without individual fault detection and isolation schemes. Each fault set can be accommodated either by one candidate controller or by a set of controllers under an appropriate switching law. Two aircraft examples are included to illustrate the efficiency of the proposed method.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2012, 22, 1; 87-97
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on striking ship with loading impact on the performance of the double hull oil tanker collision
Autorzy:
Wu, W.
Yang, Y.
Zhang, J.
Lu, J.
Powiązania:
https://bibliotekanauki.pl/articles/258890.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
ship collision
fluid-structure interaction
impact parameters
numerical simulation
Opis:
Due to the great danger of the collision of oil tankers, lots of research on the collision of oil tankers has been carried out. But, at present, the research on the collision of oil tankers mainly focuses on the loading condition of the struck ship, ignores the impact on the loading condition of the striking ship. However, during the actual oil tanker collision, the striking ship is generally in the state of loading. Therefore, it is necessary to carry out the analysis of the impact of the loading condition of the striking ship on the collision damage of the oil tanker. In this paper, the effect of striking ship with loading on the impact performance of the side structure during the collision of the cargo double hull oil tanker has been investigated. The ship collision model was established by using the finite element software ANSYS/ LS-DYNA which is based on 7000 tons of double hull oil tankers. Based on the analysis of the collision force, impact of striking speed changes, impact of striking deep changes and structural energy absorption during the collision process, the influence of the striking ship with loading on the damage mechanism and the impact performance of the double shell oil ship side structure was expounded. The results show that the influence of the striking ship with loading can be great to the damage to side hull during the research of the collision performance of the oil tanker.
Źródło:
Polish Maritime Research; 2018, S 2; 42-48
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on Reclamation of CO2-hardened Sodium Silicate Used Sands by CaO Powder
Autorzy:
Lu, Jijun
Yang, Lei
Qian, Jiangbing
He, Wei
Wang, Huafang
Powiązania:
https://bibliotekanauki.pl/articles/2174624.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sodium silicate sands
reclamation
orthogonal experiment
wet reclamation
dry reclamation
hardening of the sands
masa krzemianowo-sodowe
regeneracja
utwardzanie
eksperyment
Opis:
Aiming at the problems of wet reclamation consuming a lot of water, dry (mechanical) reclamation having wear and power consumption, this paper to find suitable reclamation reagents to reduce the influence of harmful substances in used sodium silicate sands. By comparing the reclamation effect of CaO, Ca(OH)2 and Ba(OH)2 reclamation powder reagents, it was concluded that CaO had the best reclamation effect. Through the single factor experiment, the influence of CaO on the reclamation effect was explored: 1. addition amount of CaO; 2. the additional amount of water; 3. reclamation time. The orthogonal results showed that the CaO reclamation effect was the best when the amount of CaO was 1.5%, the amount of sodium silicate was 4.0%, the amount of water added was 6.0%, and the reclamation time was 12.0h. In this experiment, 82.2% carbonate and 75.0 % silicate in used sands can be removed. The microscopic analysis of the reclamation sands was carried out by scanning electron microscope (SEM); The surface was relatively smooth, without large area cracks and powder accumulation. Compared with the used sands, the instant, 24h ultimate, and residual strengths of the reclaimed sands were increased by 536.5%, 458.1%, and 89.8%, respectively, which was beneficial to the reclamation of the CO2 sodium silicate used sands.
Źródło:
Archives of Foundry Engineering; 2022, 22, 3; 99--106
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stability analysis of high-order Hopfield-type neural networks based on a new impulsive differential inequality
Autorzy:
Liu, Y.
Yang, R.
Lu, J.
Wu, B.
Cai, X.
Powiązania:
https://bibliotekanauki.pl/articles/330348.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
impulsive differential inequality
globally exponential stability
high order Hopfield type neural network
nierówność różniczkowa
stabilność wykładnicza
sieć neuronowa Hopfielda
Opis:
This paper is devoted to studying the globally exponential stability of impulsive high-order Hopfield-type neural networks with time-varying delays. In the process of impulsive effect, nonlinear and delayed factors are simultaneously considered. A new impulsive differential inequality is derived based on the Lyapunov–Razumikhin method and some novel stability criteria are then given. These conditions, ensuring the global exponential stability, are simpler and less conservative than some of the previous results. Finally, two numerical examples are given to illustrate the advantages of the obtained results.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2013, 23, 1; 201-211
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Some non-homogeneous Hardy spaces on locally compact Vilenkin groups
Autorzy:
Lu, Shanzhen
Yang, Dachun
Powiązania:
https://bibliotekanauki.pl/articles/965121.pdf
Data publikacji:
1996
Wydawca:
Polska Akademia Nauk. Instytut Matematyczny PAN
Tematy:
Vilenkin group
dual space
Herz space
atom
Hardy space
molecule
Źródło:
Colloquium Mathematicum; 1996, 69, 1; 1-17
0010-1354
Pojawia się w:
Colloquium Mathematicum
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Safety evaluation for a high signal operator with electric field exposure induced by contact wires
Autorzy:
Yang, Chang-Qiong
Lu, Mai
Powiązania:
https://bibliotekanauki.pl/articles/1841301.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
contact wires
electric field
finite element method (FEM)
high signal operator
ICNIRP standards
occupational exposure
safety evaluation
Opis:
To evaluate the occupational safety of a high signal operator exposed to the electric field induced by contact wires with a frequency of 50 Hz and a voltage of 27.5 kV, this study established a model of a high signal operator working in the vicinity of single and double-track railways. The electric field distribution in the operator’s body and his head were calculated and analyzed during the operation using the finite element method (FEM). The calculated results were compared with the international standard occupational exposure limits formulated by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and action levels (ALs), exposure limit values (ELVs) in Directive 2013/35/EU (EU Directive). In the case of a single-track railway exposure, the maximum electric field strength in the worker’s body, in the scalp layer, and inside the brain are 227 mV/m, 2.76 kV/m, and 0.14 mV/m, respectively. For a double-track railway exposure, the maximum internal electric field strength of the operator is 310 mV/m, which is 37.85% of the occupational exposure basic restriction limit. The maximum electric field strength in the head layers is 3.42 kV/m, which is 34.2% of the occupational exposure reference level and 34.2% of the low ALs. The maximum electric field strength of the brain is 0.19 mV/m, which is 0.19% of the occupational basic restriction limit and 0.135% of the sensory effects ELVs. Results show that the electric field exposure of the high signal operator to contact wires in single- and double-track railways is lower than the occupational exposure limits provided by the ICNIRP and EU Directive standards and is thus regarded as safe for workers.
Źródło:
Archives of Electrical Engineering; 2021, 70, 2; 431-444
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Proposed genotype definition of Porcine sapelovirus
Autorzy:
Yang, T.
Lu, Y.
Zhang, L.
Powiązania:
https://bibliotekanauki.pl/articles/2087188.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Porcine sapelovirus
genotype
phylogenetic and genetic analyses
Źródło:
Polish Journal of Veterinary Sciences; 2021, 24, 2; 307-312
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation and Performance Optimization of Organosilicon Slag Exothermic Insulating Riser
Autorzy:
Lu, Jijun
Qian, Jiangbing
Yang, Lei
Wang, Huafang
Powiązania:
https://bibliotekanauki.pl/articles/27314121.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
organosilicon slag
exothermic insulation
optimization
żużel krzemoorganiczny
izolacje
optymalizacja
Opis:
The exothermic insulating riser played an important role in the solidification process of metal liquid for the improvement of casting quality. This paper focused on the use of organosilicon slag to replace part of the aluminum powder as an exothermic agent for the riser, to reduce production costs and turn waste into treasure. The experiments firstly studied the effect of organosilicon slag content on the combustion temperature and holding time and determined the components of the riser exothermic agent and organosilicon slag. On this basis, the effects of the content of Na3AlF6 flux and alkali phenolic resin binder on the combustion heating time and strength properties of the riser were studied. And the ratio of mixed oxidants was determined by single-factor orthogonal experiments to optimize the addition of three oxidants, Fe3O4, MnO2, and KNO3. Finally, the performance of the riser prepared after optimization was compared with that of the riser prepared with general aluminum powder. The results showed that with the mixture of 21% organosilicon slag and 14% aluminum powder as the exothermic agent, the highest combustion temperature of the prepared exothermic insulating riser was 1451℃ and the holding time was 193 s; the optimal content of Na3AlF6 flux was 4%, and the best addition alkali phenolic resin binder was 12%; the optimized mixing ratio of three oxidants was 12% for Fe3O4, 6% for MnO2, and 6% for KNO3. Under the optimized ratio, the maximum combustion temperature of the homemade riser was 52℃ and the heat preservation time was 14% longer compared with the conventional exothermic insulating riser with 25-35% aluminum powder.
Źródło:
Archives of Foundry Engineering; 2023, 23, 1; 75--82
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Phytochelatins of Cladophora rupestris in Pb2+ absorption and its detoxification
Autorzy:
Zhang, Lu-Sheng
Yang, Liu
Li, Lingsheng
Feng, Xiaoyu
Cao, De-Ju
Liu, Zhao-Wen
Powiązania:
https://bibliotekanauki.pl/articles/27323982.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
phytochelatins
heavy metals
detoxification
Cladophora rupestris
Pb+
fitochelatyny
metale ciężkie
detoksykacja
Opis:
Phytochelatins (PCs) exist widely in plants and are closely related to plant resistance to heavy metals (HMs). Glutathione (GSH) and nonprotein thiols (NPTs) are the major components of PCs. This study investigates the role of the PCs of Cladophora rupestris in Pb2+ accumulation and detoxification. The distribution of Pb2+ in the PCs of C. rupestris was studied. FTIR and XPS are used to characterize the chelating power of Pb2+ with PCs in C.rupestris. The curve fitting of the secondary protein structure is used to identify the functional groups with Pb2+. Results showed that the content of Pb2+ in the PCs of C. rupestris increased with an increase in Pb2+ stress. Pb content increased to 352 and 314 mg/kg in NPTs and GSH, respectively, when Pb stress concentration reached 7.5 mg/dm3 . The Pb2+ fraction of C. rupestris PCs reached a maximum of 10.8 and 9.3% in NPTs and GSH, respectively. The Pb2+ uptake by GSH and NPTs was 40–48% and 52–60%, respectively. Pb2+ bound with the PCs of C. rupestris, forming complexes that contained Pb–OOC, Pb–C=O, CO–Pb, –N=Pb, Pb–NH2, Pb–O, Pb–N–, Pb–C–, Pb–S, and Pb2+ with multiple groups of PCs as bridging ligand atoms.
Źródło:
Environment Protection Engineering; 2023, 49, 3; 31--42
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optical and Scintillation Properties of $Bi_{4}(Ge_{x}S_{1-x})_{3}O_{12}$ Single Crystal
Autorzy:
Xiao, X.
Xu, J.
Lu, B.
Cai, W.
Zhang, Y.
Shen, H.
Yang, B.
Xiang, W.
Powiązania:
https://bibliotekanauki.pl/articles/1399369.pdf
Data publikacji:
2015-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.10.Fq
61.05.C-
78.20.Ci
78.70.Ps
Opis:
The solid solution crystals, $Bi_{4}(Ge_{x}Si_{1-x})_{3}O_{12}$ (BGSO) with x=0, 0.05, and 0.15, have been grown by the modified vertical Bridgman method. The as-grown crystals show 80% of transmittance with an absorption edge of 285 nm. The relative light yields of BGSO crystals are found to be 7.2%, 6.3%, and 4.2% of CsI(Tl) crystal for x=0, 0.05, and 0.15, respectively. The energy resolutions of these crystals are 18.9%, 21.3%, and 24.7%, respectively, with PMT for 662 keV gamma rays at room temperature when exposed to $\text{}^{137}Cs$ γ -ray. The scintillation performance of BGSO crystals clearly deteriorates with the increase of Ge content. However, the appropriate number of germanium ions doped to BSO crystal can improve its crystallization behavior and effectively restrain component segregation. It is expected that large size crystals of BGSO will be grown and applied to the dual readout calorimeter in the nearest future.
Źródło:
Acta Physica Polonica A; 2015, 127, 3; 854-858
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies