Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Lu, H." wg kryterium: Autor


Tytuł:
Aluminum-Doped Zinc Oxide Thin Films Prepared by Sol-Gel and~RF Magnetron Sputtering
Autorzy:
Wu, G.
Chen, Y.
Lu, H.
Powiązania:
https://bibliotekanauki.pl/articles/1504062.pdf
Data publikacji:
2011-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.15.Cd
82.70.Gg
77.55.hf
Opis:
Zinc oxide (ZnO) thin films have become technologically important materials due to their wide range of electrical and optical properties. The characteristics can be further adjusted by adequate doping processes. In this paper, aluminum-doped zinc oxide thin films have been prepared on glass substrates using a sol-gel route and the radio-frequency magnetron sputtering process. The stoichiometry could be easily adjusted by controlling the nanosized precursor concentration and the thickness by dip-coating cycles. On the other hand, the mixed $N_2O//Ar$ plasma gas provided adequate N doping for the RF sputtering process. The results showed the low electrical resistivity of 21.5 Ω cm with the carrier concentration of - 3.21 × $10^{18} cm^{-3}$ for the n-type aluminium-doped zinc oxide film. They were 34.2 Ω cm and + 9.68 × $10^{16} cm^{-3}$ for the p-type aluminium-doped zinc oxide film. The optical transmittance has been as high as 85-90% in the 400-900 nm wavelength range. The aluminium-doped zinc oxide (2 at.% Al) films exhibited the hexagonal wurzite structure with (002) preferred crystal orientation. The electrical characteristics were depicted by the gradual increase in N and NO that occupy the oxygen vacancies.
Źródło:
Acta Physica Polonica A; 2011, 120, 1; 149-152
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of monochlorobenzene contamination in soils using geostatistical interpolation and 3D visualization for agrochemical industrial sites in southeast China
Autorzy:
Ren, L.
Lu, H.
He, L.
Zhang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/204614.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
soil pollution
monochlorobenzene
POPs
persistent organic pollutants
geostatistical interpolation
3D visualization
Opis:
Persistent organic pollutants (POPs) originating from agrochemical industries have become an urgent environmental problem worldwide. Ordinary kriging, as an optimal geostatistical interpolation technique, has been proved to be sufficiently robust for estimating values with finite sampled data in most of the cases. In this study, ordinary kriging interpolation integrate with 3D visualization methods is applied to characterize the monochlorobenzene contaminated soil for an agrochemical industrial site located in Jiangsu province. Based on 944 soil samples collected by Geoprobe 540MT and monitored by SGS environmental monitoring services, 3D visualization in terms of the spatial distribution of pollutants in potentially contaminated soil, the extent and severity of the pollution levels in different layers, high concentration levels and isolines of monochlorobenzene concentrations in this area are provided. From the obtained results, more information taking into account the spatial heterogeneity of soil area will be helpful for decision makers to develop and implement the soil remediation strategy in the future.
Źródło:
Archives of Environmental Protection; 2016, 42, 3; 17-24
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Study of the Effect of Furrows on Biosonar Beamforming in Aselliscus Stoliczkanus Bat
Autorzy:
He, W.
Feng, J.
Gao, L.
Zhang, Z.
Lu, H.
Powiązania:
https://bibliotekanauki.pl/articles/176802.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Aselliscus Stoliczkanus bat
furrows
frequency-selective characteristics
finite element method
beam pattern
Opis:
The Aselliscus Stoliczkanus bat, studied here, has intricately shaped structures surrounding the nostrils. These structures are hypothesised to have influence on animals’ acoustic radiation patterns. Using micro-tomography scanning technique, a 3D digital model of the noseleaf is reconstructed and biosonar beam pattern is analysed using a finite element method based on the 3D noseleaf model. The present research focuses on the conspicuous furrows in noseleaf, and our analysis allows to conclude the followings: a) structural details in noseleaf of Aselliscus Stoliczkanus bat can produce acoustic effects even if it is not adjacent to the nostrils, b) the furrows possess frequency-selective characteristics, c) the furrows have the function to manipulate the direction and width of the outgoing ultrasound wave.
Źródło:
Archives of Acoustics; 2017, 42, 3; 395-399
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effects of cavity geometry on an aspirated compressor cascade
Autorzy:
Guo, S.
Lu, H.-W.
Liu, J.
Wu, C.-J.
Powiązania:
https://bibliotekanauki.pl/articles/280871.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
highly loaded compressor cascade
boundary layer suction
suction flow distribution
off-take cavity
Opis:
The impact of the bleed off-take cavity within aspirated blades on the aerodynamic perfor- mance of a highly loaded compressor cascade was explored. Three-dimensional Navier-Stokes simulations were conducted in rectangular compressor cascades after validation against expe- rimental results were done. Five different off-take configurations with varying suction loca- tion were numerically evaluated. The results show that the regularities of the suction flow distribution on the suction slot inlet greatly influence the benefits of boundary layer suction. The distribution style greatly depends not only on the flow condition of the blade passage, but also on the realization of the suction process and the geometry of the cavity inside the aspirated blade. The low kinetic fluid in the endwall region compared with that around the midspan is usually prone to be sucked into the suction slot. The distribution of the suc- tion mass flow along the spanwise direction would be symmetrical if the suction position is properly selected and the inside off-take cavity is well designed, even though the bleeding system has been simplified to be asymmetrical as employed in the present document.
Źródło:
Journal of Theoretical and Applied Mechanics; 2014, 52, 1; 117-128
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Facile Synthesis of 3,3'-Dinitro-5,5'-diamino-bi-1,2,4-triazole and a Study of Its Thermal Decomposition
Autorzy:
Ma, Q.
Lu, H.
Qu, Y.
Liao, L.
Li, J.
Fan, G.
Chen, Y.
Powiązania:
https://bibliotekanauki.pl/articles/358272.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
3,3’-dinitro-5,5’-diamino-bi-1,2,4-triazole
facile synthesis
DSC-TG
RSFTIR
TG-IR
thermolysis
Opis:
3,3’-Dinitro-5,5’-diamino-bi-1,2,4-triazole (DABNT) was synthesized by a facile method and its crystalline density was determined as 1.839 g·cm−3 at 293(2) K by X-ray diffraction. Its thermal decomposition kinetics and mechanism were studied by means of differential scanning calorimetry-thermogravimetry (DCS-TG), in situ thermolysis by rapid-scan Fourier transform infrared spectroscopy (RSFTIR) and simultaneous TG-IR technology. The results showed that the apparent activation energies obtained by the Kissinger, Ozawa and Starink methods were 122.9 kJ·mol−1, 123.2 kJ·mol−1 and 123.5 kJ·mol−1, respectively. The thermodynamic parameters of ΔS≠, ΔH≠ and ΔG≠ were −37.5 J·K−1·mol−1, 118.4 kJ·mol−1 and 138.7 kJ·mol−1, respectively. The decomposition reaction process of DABNT starts with the transformation from a primary amine to a secondary amine and then the loss of one nitro-group from the DABNT structure. Gaseous products, such as N2O and H2O, were detected from decomposition in the range of 50-300 °C. Density functional theory (DFT) calculations were further employed to illustrate the decomposition mechanism. The above-mentioned information on the synthesis and thermal behaviour is quite useful for the scale-up and evaluation of the thermal safety of DABNT.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 2; 281-295
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fatigue Behavior and Mechanism of FV520B-I Owing to the Effect of Loading Frequency on the Fatigue Property in HCF and VHCF Regime
Autorzy:
Wang, J.
Zhang, Y.
Shi, B.
Zhao, Q.
Sun, Q.
Zhang, Z.
Lu, H.
Powiązania:
https://bibliotekanauki.pl/articles/353784.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ultrahigh loading frequency
FV520B-I
fatigue strength
fatigue conversion model
Opis:
Fatigue property of FV520B-I is affected by the ultrahigh loading frequency significantly, and the ultrasonic fatigue experimental data can’t be employed directly to analyze the fatigue failure in the actual remanufacturing engineering. However few theories about the effect of loading frequency on the fatigue property of FV520B-I has ever been proposed. In this paper, both ultrasonic experiment and conventional experiment are conducted out to obtain the fatigue data. The effect of loading frequency on the fatigue data distribution is discussed firstly, its fatigue limit declines with the increase of the loading frequency. Then the fracture surface observations are captured, the fatigue property and fatigue behavior mechanism of FV520B-I is examined by analyzing the fracture surface features, crack initiation and failure observations. A new material frequency correction factor is proposed and introduced to eliminate the influence of the loading frequency on the FV520B-I fatigue property. FV520B-I empirical fatigue life conversion model and fatigue strength conversion model are established with comprehensive use of a fitting algorithm based on the combination of experimental data and classic formula. A clear understand of the effect of loading frequency on the fatigue property of FV520B-I is novel and has an important significance in guaranteeing the accuracy of the actual fatigue analysis of FV520B-I in the remanufacturing engineering.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 347-357
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Atomic Layer Deposition of Magnetic Thin Films
Autorzy:
Mantovan, R.
Georgieva, M.
Perego, M.
Lu, H.
Cocco, S.
Zenkevich, A.
Scarel, G.
Fanciulli, M.
Powiązania:
https://bibliotekanauki.pl/articles/1814033.pdf
Data publikacji:
2007-12
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.15.-z
75.70.-i
Opis:
We report on the research effort towards the development of processes for the realization of magnetic tunnel junctions by atomic layer deposition. Our strategy follows two main schemes. The first is a hybrid process where the ferromagnetic layers are produced by chemical vapour deposition and the tunnel oxide is deposited by atomic layer deposition. As ferromagnetic electrodes we use Co and $Fe_3O_4$, while MgO, $Al_2O_3$, and $HfO_2$ are employed as tunnel oxides. The second and most intriguing scheme is a full-oxide approach in which the ferromagnetic layers and the tunnel barrier layer are all oxides grown by atomic layer deposition. As ferromagnetic layers we focused on the growth of complex manganites $(La_{0.7}Sr_{0.3}MnO_3)$ while as a tunnel oxide we propose $La_2O_3$. Film composition has been studied with time of flight secondary ion mass spectroscopy and Rutherford backscattering spectrometry. X-ray diffraction, X-ray reflectivity, and Fourier transform infrared spectroscopy have been used to investigate the structure and morphology of the layers. The magnetic properties of the films are measured by superconducting quantum interference device magnetometer.
Źródło:
Acta Physica Polonica A; 2007, 112, 6; 1271-1280
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Magnolol inhibits Streptococcus suis-induced inflammation and ROS formation via TLR2/MAPK/NF-κB signaling in RAW264.7 cells
Autorzy:
Wang, J.
Sun, Y.
Zhang, L.
Xu, W.
You, J.
Lu, H.
Song, Y.
Wei, J.
Li, L.
Powiązania:
https://bibliotekanauki.pl/articles/2087779.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
magnolol
Streptococcus suis
Toll-like receptor2
mitogen-activated protein kinase
nuclear factor Kappa B
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 1; 111-118
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A study on the sustainable management framework and the economic value evaluation for Taiwan reservoir watershed
Badania struktury zrownowazonej gospodarki oraz ocena wartosci ekonomicznej zlewni zbiornikow wodnych na Tajwanie
Autorzy:
Lu, S -H
Peng, S.-H.
Ma, H.-W.
Powiązania:
https://bibliotekanauki.pl/articles/81829.pdf
Data publikacji:
2010
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
sustainable management
economic value
Taiwan
reservoir
watershed
valuation method
Opis:
Recently lack of sustainable management for the reservoir watershed becomes a predicament for the water issues in Taiwan. The study tried to recognize the framework of the sustainable management of the Taiwan reservoir watershed and its key factors by using the analytic hierarchy process and the Delphi method. Through the identification questionnaires and the CVM (contingent valuation method), it also discussed the gap of expert and public for the identification of satisfaction, environmental protection and the potential value for the recent reservoir watershed. However, the results showed that the “natural stability” is the significant factor in the first level and the “Nature resources conservation” and “Water storage amount” are the most important factors for the detailed level. In addition, the expert opinions were not proved by public identification, and the present governance budgets are too low to respond to the potential values of public expectancy.
W pracy przedstawiono wyniki badań przeprowadzonych dla określenia hierarchii ważności czynników ekologicznych, ekonomicznych i socjalnych związanych ze zrównoważonym zagospodarowaniem zlewni zbiorników wodnych na Tajwanie. W badaniach zastosowano metodę ankietową, w której respondenci stosując pięciostopniową skalę mieli wskazać ważność 22 określonych przez ekspertów czynników związanych z ochroną i zrównoważonym korzystaniem z zasobów środowiska, wpływających na standard życia mieszkańców oraz możliwości rozwoju gospodarczego na obszarze zlewni zbiorników wodnych. Stwierdzono, że najważniejsze znaczenie dla ludności mają czynniki ekologiczne, w szczególności zapewnienie stabilności przyrodniczej poprzez zachowanie bioróżnorodności oraz ochrony zasobów naturalnych, w tym ilości retencjonowanej wody.
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation; 2010, 42, 1; 219-225
0208-5771
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Genetic diversity and relationship of Hunan province of China local tree peonies based on SSR markers
Autorzy:
Zhang, M.-H.
Jin, X.-L.
Wen, Y.-F.
Shen, S.
Wen-Xing
Wu, S.
Lu, J.-H.
Ye-Ye
Powiązania:
https://bibliotekanauki.pl/articles/12665369.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Tematy:
China
Hunan Province
plant cultivation
tree peony
Paeonia suffruticosa
ornamental plant
genetic diversity
genetic relationship
SSR marker
Opis:
Paeonia sect. Moutan is a wide known ornamental plant in the world. The objective of this study was to provide the theoretical basis for scientific preservation and utilization of tree peony resources of Hunan province of China. Simple sequence repeat (SSR) markers were applied to reveal the genetic diversity and relationship of 21 tree peony resources and 45 domestic and foreign tree peony cultivars. Clear bands, the size of which ranged from 115 bp to 379 bp, were detected with 14 primers. In total, 90 alleles were detected and the number of alleles detected with one primer varied between 5 and 13; the number of effective alleles ranged from 1.183 to 2.070; the polymorphism ratio of each locus was 100%. The observed heterozygosity, which ranged from 0.120 to 0.851 with an average of 0.532, was larger than the expected one, which ranged from 0.090 to 0.470 with an average of 0.300. Shannon index ranged from 0.137 to 0.695 and fixation index ranged from −0.332 to −0.869. The results show abundant genetic diversity in tree peony of Hunan province and SSR markers distinguishing homonymous tree peony resources successfully.
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2019, 18, 4; 213-223
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Functional Properties and Electromagnetic Shielding Behaviour of Elastic Warp-knitted Fabrics
Właściwości funkcyjne i ekranowanie elektromagnetyczne elastycznych dzianin kolumienkowych
Autorzy:
Yu, Z. C.
He, H. L.
Lu, Y. H.
Zhang, J. F.
Lou, C. W.
Chen, A. P.
Lin, J. H.
Powiązania:
https://bibliotekanauki.pl/articles/232038.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
functional properties
electromagnetic shielding effectiveness
protective clothing
elastic warp-knitted fabric
electromagnetic wave
właściwości funkcjonalne
skuteczność ekranowania elektromagnetycznego
odzież ochronna
elastyczna osnowa-dzianina
fala elektromagnetyczna
Opis:
An investigation was made on the electromagnetic shielding behaviour and other functional properties for manufactured multifunctional elastic warp-knitted fabrics. Bamboo charcoal polyester/Crisscross-section polyester (BC-PET/CSP) blended yarns were used as the back of the warp-knitted fabric while conductive composite yarns were used as the front. The variation in the far infrared emissivity and anion density of elastic-warp knitted fabrics produced with different proportions of BC-PET content were studied in detail. Moreover the electromagnetic shielding effectiveness (EMSE) of the fabrics with different elongation was measured in this study. The experimental results showed that increased elongation almost did not significantly affect the EM shielding behaviour of fabric K1 in the elongation range of 0 - 40%. Finally to increase the EMSE of the fabric, the lamination method was used in this study. EMSE measurement results showed that two layer K1 warpknitted fabrics with 90° interval displayed a better shielding effect against the EM wave compared to that with a 0° interval.
Przeprowadzono badania właściwości ekranujących przed polem elektromagnetycznym i innych właściwości funkcyjnych wyprodukowanych wielofunkcyjnych elastycznych dzianin kolumienkowych. Zastosowano przędze kompozytowe z mieszanek zawierających drut ze stali kwasoodpornej, ciągłe włókna poliamidowe i poliestrowe oraz cięte włókna ze regenerowanej celulozy z surowca bambusowego. Badano emisyjność w dalekiej podczerwieni i gęstość anionową dzianin kolumienkowych wytworzonych przy rożnych proporcjach zastosowanych składników. Poza tym badano efektywność ochrony elektromagnetycznej dzianin przy rożnych wydłużeniach. Wyniki eksperymentów pokazują, że zwiększone wydłużenie prawie nie wpływa istotnie na właściwości ekranujące. Dla zwiększenia efektu ekranowania zastosowano metodę laminacji.
Źródło:
Fibres & Textiles in Eastern Europe; 2015, 5 (113); 78-83
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modifying effect of electron beam irradiation on magnetic property of iron-bearing minerals
Autorzy:
Wang, H.
Lu, S.
Powiązania:
https://bibliotekanauki.pl/articles/109818.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
magnetic susceptibility
iron bearing mineral
sulfide
electron beam irradiation
Opis:
The effect of electron beam irradiation on magnetic property of iron bearing minerals was investigated by susceptibility measurements. The results show that the magnetic susceptibility of iron bearing sulfide minerals can be enhanced remarkably by strong beam current irradiation, while the magnetic susceptibility of oxidized iron minerals keeps unchanged and even is slightly reduced. The magnetic susceptibility of arsenopyrite can reach the ferromagnetic level. The particle size of irradiated minerals makes notable effects on magnetic susceptibility. The magnetic susceptibility of irradiated minerals is enhanced greatly with reduction of particle size, and the irradiation dose corresponding to the maximum magnetic susceptibility is decreased simultaneously. Exposure of pyrite to small beam current electron irradiation can only enhance its magnetic susceptibility from 4 to 5-fold. Enhancement of magnetic property by radiation induced defects and excitation in minerals is limited. Strong beam current electron irradiation provides a novel approach to enlarge the magnetic property differences between iron bearing minerals.
Źródło:
Physicochemical Problems of Mineral Processing; 2014, 50, 1; 79-86
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Body Characteristic Index to Evaluate the Level of Risk of Heat Strain for a Group of Workers With a Test
Autorzy:
Lu, S.
Peng, H.
Gao, P.
Powiązania:
https://bibliotekanauki.pl/articles/89730.pdf
Data publikacji:
2014
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
heat environment
physical fitness
anthropometric characteristic
index
heat strain
środowisko cieplne
sprawność fizyczna
antropometria
Opis:
The purpose of this study was to develop a body characteristic index (BCI) based on the distribution of maximal oxygen uptake per body mass (VO2max/mass), body surface area per body mass (BSA/mass), and percentage of body fat (Fat%) to evaluate the relative level of individual physiological responses to heat strain in a group of workers. BCI was based upon the data obtained from 10 males and 10 females exercising for 60 min on a treadmill at 2 relative exercise intensities of 25% and 45% VO2max in mild, warm wet, and hot dry climate condition, separately. BCI was developed into 2 formulas, which were proved to be better predictors for heat strain responses than each individual characteristic, and more sensitive than body type to describe the distributions of individual characteristics and distinguish the differences in physiological responses to heat.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2014, 20, 4; 647-659
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Approximate Solutions of Schrödinger Equation under Manning-Rosen Potential in Arbitrary Dimension via SUSYQM
Autorzy:
Hassanabadi, H.
Lu, L.
Zarrinkamar, S.
Liu, G.
Rahimov, H.
Powiązania:
https://bibliotekanauki.pl/articles/1418113.pdf
Data publikacji:
2012-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
03.65.Ge
02.30.Gp
03.65.-w
34.20.Cf
Opis:
The Schrödinger equation under the Manning-Rosen potential is solved in arbitrary dimension via the quantum mechanical idea of supersymmetry. The Pekeris approximation is used to overcome the inconsistency of the potential with the centrifugal term. Comments on the energy eigenvalue behavior versus dimension are included. The inter-dimensional degeneracy for various orbital quantum number l and dimensions D are studied. The expectation values of some physical parameters are reported via the Feynman-Hellmann theorem.
Źródło:
Acta Physica Polonica A; 2012, 122, 4; 650-654
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation and Characterisation of Polylactic acid (PLA)/Polycaprolactone (PCL) Composite Microfibre Membranes
Otrzymywanie i charakterystyka kompozytowych membran z mikrowłókien PLA/PCL
Autorzy:
Lu, Y.
Chen, Y.-C.
Zhang, P.-H.
Powiązania:
https://bibliotekanauki.pl/articles/233499.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
PLA/PCL
electrospinning
microfibre membrane
property
elektroprzędzenie
membrana z mikrofibry
mikrowłókno
Opis:
Biodegradable polymers like PLA and PCL have wide application in tissue engineering because of their biocompatibility, degradation and mechanical properties. In this study, the optimised electrospinning parameters of PLA/PCL composite membranes were determined with scanning electron microscopy to obtain smooth and relatively fine microfibre. The properties and structure of electrospinning PLA, PCL and PLA/PCL(70/30) membranes were investigated by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), X-ray diffraction (XRD), the water contact angle, water absorption degree and tensile strength. The results revealed that PLA/PCL composite membranes possessed better mechanical and hydrophilic properties when compared to single component microfibre membranes like PLA and PCL. The improvements above are conducive to microfibre membrane application in the biomedical sector.
Biodegradowalne polimery, takie jak PLA i PCL znajdują wiele zastosowań w inżynierii tkankowej ze względu na swoją biokompatybilność, oraz właściwości mechaniczne. W badaniach, wyznaczono optymalne parametry elektroprzędzenia błon kompozytowych PLA/PCL stosując metodę skaningowej mikroskopii elektronowej, w celu otrzymania gładkich i cienkich mikrowłókien. Właściwości i strukturę elektroprzędzionych błon PLA, PCL i PLA/PCL(70/30) badano za pomocą elektroskopii skaningowego (SEM), różnicowej kalorymetrii skaningowej (DSC), dyfrakcji rentgenowskiej (XRD), metody kąta zwilżania wody, współczynnika absorpcji wody i wytrzymałości na rozciąganie. Wyniki wykazały, że błony kompozytowe PLA/PCL posiadają lepsze właściwości mechaniczne i hydrofilowe, w porównaniu do jednoskładnikowych błon z mikrowłókien, takich jak PLA i PCL. Powyższe ulepszenia sprzyjają zastosowaniu membran z mikrowłókien w branży biomedycznej.
Źródło:
Fibres & Textiles in Eastern Europe; 2016, 3 (117); 17-25
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies