Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Liu, Song" wg kryterium: Autor


Tytuł:
Passenger’s routes planning in stochastic common-lines’ multi-modal transportation network through integrating Genetic Algorithm and Monte Carlo simulation
Autorzy:
Peng, Yong
Mo, Zhiyao
Liu, Song
Powiązania:
https://bibliotekanauki.pl/articles/1955092.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
stochastic networks
multimodal transportation
passengers’ route
genetic algorithm
Monte Carlo simulation
sieci stochastyczne
transport multimodalny
algorytm genetyczny
symulacja Monte Carlo
Opis:
In the urban transportation network, most passengers choose public transportation to travel. However, bad weather, accidents, traffic jams and other factors lead to uncertainty in transportation network. Besides, transport vehicles running on the same segments of routes and belonging to different modes or routes make the transportation network more complicated. In order to improve the efficiency of passenger’s travel, this paper aim to introducing an approach for optimizing passenger travel routes. This approach takes the travel cost and the number of transfers as constraints to finding the shortest total travel duration of passenger in urban transportation network. The running duration and dwell duration of the vehicles in the network are uncertain, and the vehicles are running according to the timetables. As transportation modes, bus, rail transit and walk are considered. In terms of methodological contribution, this paper combines Genetic Algorithm (GA) and Monte Carlo simulation to deal with optimization problem under stochastic conditions. This paper uses Monte Carlo simulation to simulate the running duration and dwell time of vehicles in different scenarios to deal with the uncertainty of the network. The shortest path of passenger’s travel is solved by GA. Two kinds of population management strategies including single population management strategy and multiple population management strategy are designed to guide the solution population evolving process. The two kinds of population management strategies of GA are tested in numerical example. The satisfactory convergence performance and efficiency of the model and algorithm is verified by the numerical example. The numerical example also demonstrated that the multiple population management strategy of GA can get better results in a shorter CPU time. At the same time, the influences of some significant variables on solution are performed. This paper is able to provide a scientific quantitative support to the path scheme selection under the influence of common-lines and timetables of different modes of transportation in stochastic urban multimodal transportation network.
Źródło:
Archives of Transport; 2021, 59, 3; 73-92
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
CAMPTOTHECIN INHIBITS MIGRATION, INVASION AND CLONOGENIC PROPERTY OF LIVER CANCER CELLS BY MODULATING MICRORNA EXPRESSION
Autorzy:
Liu, Zhenzhong
Wu, Song
Li, Xiaoqian
Powiązania:
https://bibliotekanauki.pl/articles/895460.pdf
Data publikacji:
2020-04-29
Wydawca:
Polskie Towarzystwo Farmaceutyczne
Tematy:
Hepatocellular Carcinoma
cell proliferation
cell cycle
Camptothecin
miRNA
Opis:
Camptothecin (CPT), an alkaloid natural product, extracted from Camptotheca acuminata bark, has been reported to have potential antitumor activity in diverse cancers. MicroRNAs (MiRNAs) are a class of short, non-coding RNAs that plays a crucial role in the normal physiology by attenuating translation. Here, we showed that the CPT modulates the expression of miRNAs in hepatocellular carcinoma cells (HCC). Microarray analysis reveals that CPT modulates the expression of as many as 39 miRNAs in HCC cells (Huh7), 27 miRNAs were downregulated whereas 12 miRNAs were upregulated. miR-16 is the key miRNA upregulated by CPT and targets key prosurvival proteins (MMP-2, MMP-9 and cyclin D1). Our results demonstrate that CPT is inhibiting cell viability of HCC cells significantly when compared with the untreated cells. Wound healing and colony formation assay confirm inhibition of cell migration and clonogenic property of Huh7 cells respectively, upon the dose-dependent treatment of CPT. Furthermore, the Boyden chamber assay analysis revealed a significant inhibition of number of invasive cells in CPT treated cells with comparison to untreated Huh7 cells. Mechanistically, CPT upregulates miR-16 expression which targets MMP-2, MMP-9, cyclin D1 downregulation and subsequently upregulates the expression of E-cadherin, TIMP1, p21, and p27, thereby inhibits cell migration, invasion and clonogenic property of HCC cells. In summary, CPT treatment in Huh7 cells decreases cell viability and upregulates miR-16 expression, which results in inhibition of cell migration, invasion and clonogenic property of cells, by decreasing MMP-2, MMP-9, cyclin D1 and increasing the expression of cell cycle-regulated proteins p21 and p27.
Źródło:
Acta Poloniae Pharmaceutica - Drug Research; 2020, 77, 2; 295-304
0001-6837
2353-5288
Pojawia się w:
Acta Poloniae Pharmaceutica - Drug Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optical design of a short-wave infrared coded aperture snapshot spectral imager based on Offner–Wynne imaging spectrometer
Autorzy:
Song, Chong
Zhou, Liang
Liu, Zhaohui
Jiang, Kai
Liu, Kai
Powiązania:
https://bibliotekanauki.pl/articles/2086755.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
Offner-Wynne imaging spectrometer
CASSI
coded aperture snapshot spectral imager
short-wave infrared
optical design
Opis:
A calculation model to obtain the optimal combination of Offner–Wynne imaging spectrometer parameters to balance the RMS spot radius of the chief ray over the entire field is established. On the basis of the calculation model, an Offner–Wynne imaging spectrometer is designed, and then it is applied in a short-wave infrared coded aperture snapshot spectral imager (CASSI). The optical system of the short-wave infrared CASSI is designed by a combination method of independent design and integrated optimization. The spectral smile and spectral keystone of the optical system which operates in the 900–1700 nm band are respectively less than half a pixel. The focal length of the optical system is 1200 mm, the total optical system length is 775mm, and its average spectral resolution is 16 nm. The optical system offers the advantages of excellent imaging quality, compact optical structure, high optical transmittance, reduced spectral smile and spectral keystone.
Źródło:
Optica Applicata; 2022, 52, 2; 143--161
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Controllable preparation of highly active horseradish peroxidase-gold nanoparticle bionanoconjugate
Autorzy:
Zhang, P.
Liu, Ch.
Song, S.
Peng, Ch.
Powiązania:
https://bibliotekanauki.pl/articles/778931.pdf
Data publikacji:
2012
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
horseradish peroxidase
gold nanoparticles
bionanoconjugate
Opis:
A novel method of immobilizing horse radish peroxidase enzyme (HRP) onto the surface of gold nanoparticles (GNPs) was developed. As a result, a high-activity bionanoconjugates was obtained through utilizing the biotin-streptavidin (SA) system. The HRP-SA-GNP bionanoconjugate with high activity was conveniently prepared through the biotin- avidin system. Compared with the HRP-GNP bioconjugate prepared through the traditional electrostatic absorption method, the enzyme activity per GNPs of this new bionanoconjugate was enhanced by 10 times. Moreover, the enzyme activity of this bionanoconjugate was controllable. The above method of bionanoconjugation preparation has promising applications In the fi elds including preparing highly active bio-nanoprobe and immobilized enzyme.
Źródło:
Polish Journal of Chemical Technology; 2012, 14, 4; 57-60
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved dynamic control method for energy storage units in PV dominated microgrids
Autorzy:
Wang, Q.
Liu, Y.
Song, W.
Xuan, K.
Powiązania:
https://bibliotekanauki.pl/articles/141382.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
current correction coefficient
load distribution
PV DC microgrid
secondary control
weighted calculation
Opis:
In a PV-dominant DC microgrid, the traditional energy distribution method based on the droop control method has problems such as output voltage drop, insufficient power distribution accuracy, etc. Meanwhile, different battery energy storage units usually have different parameters when the system is running. Therefore, this paper proposes an improved control method that introduces a reference current correction factor, and a weighted calculation method for load power distribution based on the parameters of battery energy storage units is proposed to achieve weighted allocation of load power. In addition, considering the variation of bus voltage at the time of load mutation, voltage secondary control is added to realize dynamic adjustment of DC bus voltage fluctuation. The proposed method can achieve balance and stable operation of energy storage units. The simulation results verified the effectiveness and stability of the proposed control strategy.
Źródło:
Archives of Electrical Engineering; 2018, 67, 4; 885-898
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of inorganic powders used for preparation of waterproof coating to coal mine roadways
Badanie proszków nieorganicznych stosowanych do przygotowania wodoodpornych powłok jezdni w kopalniach węgla
Autorzy:
Song, H.
Liu, J.
Xue, F.
Cheng, F.
Powiązania:
https://bibliotekanauki.pl/articles/947175.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
waterproof coating
coal mine roadway
adhesive
inorganic filler
powłoka wodoodporna
jezdnia w kopalni węgla
spoiwo
napełniacz nieorganiczny
Opis:
The new coatings based on styrene-acrylate copolymer with solid powder additives were prepared. Solid additives were one of three types of adhesives (white cement, Portland cement, and alumina cement) and one of four inorganic fillers (quartz powder, talcum powder, calcium carbonate powder, and fly ash). The coatings were tested by determination of surface drying time, hard drying time, tensile strength, and elongation at break. The ratio of water absorption after 7 days was also measured. The results showed that white cement was the best inorganic adhesive with optimal amount of 40–50 wt % in solid powder part. Quartz powder served as better inorganic filler compared with talcum powder and calcium carbonate powder. Fly ash could also be used as good inorganic filler but in amount lower than 10 wt %. Thus prepared coatings satisfy requirements for class III according to GB/T23445-2009 standard.
Przygotowano nowe powłoki na bazie kopolimeru styren-akrylan z dodatkiem proszków stałych. Dodatki stałe stanowiły jeden z trzech rodzajów spoiwa (cement biały, cement portlandzki i cement glinowy) oraz jeden z czterech napełniaczy nieorganicznych (kwarc w postaci proszku, talk, sproszkowany węglan wapnia oraz popiół lotny). Powłoki badano przez określanie czasu suszenia powierzchni, czasu całkowitego suszenia, wytrzymałości na rozciąganie i wydłużenia przy zerwaniu. Wyznaczano również współczynnik absorpcji wody po 7 dniach. Badania wykazały, że najlepszym spoiwem nieorganicznym jest cement biały wilości 40–50 % mas. Proszek kwarcowy jest lepszym napełniaczem nieorganicznym niż talk lub sproszkowany węglan wapnia. Stwierdzono również, że dobrym napełniaczem nieorganicznym są popioły lotne, ale mogą być stosowane tylko w ilości mniejszej niż 10 % mas. Tak przygotowane powłoki spełniają wymagania klasy III według normy GB/T 23445-2009.
Źródło:
Polimery; 2016, 61, 11-12; 844-849
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flame retardant properties of gas sealing materials used in coal mines
Uniepalniacze w materiałach zabezpieczających ściany w kopalniach węgla przed wypływem gazu
Autorzy:
Song, H.
Liu, J.
Xue, F.
Cheng, F.
Powiązania:
https://bibliotekanauki.pl/articles/947389.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
flame retardant
coal mine
gas sealing materials
tensile strength
flame resistance properties
opóźniacz palenia
kopalnia węgla
materiały zabezpieczające przed wypływem gazu
wytrzymałość na rozciąganie
odporność na płomień
Opis:
Flame retardants are key ingredients for gas sealing materials used in the coal mine wall. In this paper, the types and doses of flame retardants are investigated. The results showed that a gas sealing material with 11 wt % complex flame retardants had a good performance when the complex flame retardants were composed of aluminum hydroxide and chlorinated paraffin at a ratio of 3:8. The flame resistant property of this gas sealing material conforms to the safety standards of coal mines (MT113-1995). Furthermore, their mechanical properties met the standard requirements of the polymer cement waterproof coatings (GB/T23445-2009). The costs are very low compared with similar products in current practical use.
Zbadano wpływ rodzaju oraz ilości uniepalniacza, dodanego do emulsji styrenowo-akrylowej napełnionej krzemionką i cementem, na palność otrzymanej kompozycji zabezpieczającej ściany w kopalni węgla przed wypływem gazu. Efekt opóźnienia palenia na poziomie przewidzianym w normach bezpieczeństwa kopalń węgla (MT113-1995) uzyskano w wypadku zastosowania materiału uszczelniającego, modyfikowanego dodatkiem 11 % mas. kompozycji uniepalniacza, stanowiącej mieszaninę wodorotlenku glinu i chlorowanej parafiny w stosunku masowym 3:8. Modyfikowane materiały uszczelniające spełniają również wymagania pod względem właściwości mechanicznych, dotyczące polimerowo-cementowych powłok wodochronnych (GB/T23445-2009), a koszt ich wytwarzania jest dużo niższy niż koszt wytwarzania stosowanych obecnie produktów.
Źródło:
Polimery; 2016, 61, 4; 266-271
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dissolution kinetics of malachite in ethylene diamine phosphate solutions
Autorzy:
Shen, Peilun
Liu, Ruizeng
Liu, Dianwen
Zhan, Xiaolin
Jia, Xiaodong
Song, Kaiwei
Powiązania:
https://bibliotekanauki.pl/articles/110214.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
malachite
organic amine
ethylene diamine phosphate
dissolution
kinetic
Opis:
Ethylene diamine phosphate (EDP), as a synthetic organic reagent, was used for the first time to leach malachite, and a new method of using organic amine to leach copper oxide ore was developed. The effects of stirring speed, particle size, reagent concentration, and reaction temperature on EDP-dissolution malachite were investigated. Results showed that malachite rapidly dissolved in EDP solution. The malachite-dissolving rate also increased with increased reagent concentration, increased reaction temperature, and decreased particle size. Stirring speed exhibited nearly no effect on EDP-induced malachite dissolution. The leaching kinetics was found to follow the shrinking-core model, and dissolution was controlled by surface chemical reaction with an activation energy of 52.63kJ×mol−1. A semiempirical rate equation was obtained to describe the dissolution process expressed as 1-(1-XCu)1/3=0.0149(CEDP)0.7814 × (Pmalachite)−0.7982×exp(−6.3308/T) ×t.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 4; 1039-1048
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Właściwości antykorozyjne żywic styrenowo-akrylowych zawierających tripolifosforan glinu
Anticorrosive properties of styrene-acrylic resins containing aluminum tripolyphosphate
Autorzy:
Shangguan, L. J.
Ma, W.
Liu, G.
Song, W.
Powiązania:
https://bibliotekanauki.pl/articles/142544.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Przemysłu Chemicznego. Zakład Wydawniczy CHEMPRESS-SITPChem
Tematy:
żywice styrenowo-akrylowe
tripolifosforan glinu
właściwości antykorozyjne
otrzymywanie
styrene-acrylic resins
aluminum tripolyphosphate
anticorrosive properties
preparation
Opis:
Tripolifosforan glinu zdyspergowano w emulsji styrenowo-akrylowej. Rozkład i wielkości cząstek lateksu badano za pomocą laserowego analizatora cząstek. Właściwości antykorozyjne układu żywice styrenowo-akrylowe – tripolifosforan glinu badano za pomocą elektrochemicznej spektroskopii impedacyjnej (EIS), próby w komorze solnej według normy ASTM B-117 oraz testów adhezji. Wyniki wskazują na wzmocnienie działania ochronnego żywic styrenowo-akrylowych po dodaniu tripolifosforanu glinu.
Aluminum tripolyphosphate was introduced into the dispersion solution of styrene-acrylic emulsion The laser particle size analyzer was used to analyse the distribution and particles size of the latex particle. The anticorrosion performance of styrene-acrylic resins/aluminum tripolyphosphate was studied using electrochemical impedance spectroscopy (EIS), salt spray standard test according to ASTM B-117 and adhesion tests. The results indicated the protective performance of styrene-acrylic resins was improved by adding aluminum tripolyphosphate.
Źródło:
Chemik; 2015, 69, 9; 578-585
0009-2886
Pojawia się w:
Chemik
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of Metal Oxides on the Thermal Decomposition Kinetics and Mechanisms of HAN/PVA Based Propellants
Autorzy:
Hu, Song-qi
Liu, Xue-li
Liu, Lin-Lin
Kang, Bo
Zhang, Yan
Powiązania:
https://bibliotekanauki.pl/articles/27787991.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
HAN/PVA-based propellant
metal oxides
catalytic behaviour
kinetic parameters
Opis:
The thermal decomposition processes of HAN/PVA-based propellants have been investigated using a simultaneous thermogravimetric analysis (TGA) – differential scanning calorimetry (DSC), coupled with Fourier-Transform Infrared Spectroscopy (FTIR) and Mass Spectrometry (MS) system. The activation energy (Ea), pre-exponential factor A and reaction mechanism function f(α) of the decomposition processes have been determined by non-isothermal and Malek methods. The results showed that the decomposition process of an HAN/PVA sample occurs mainly in the temperature range 202.2~220.1 °C, with a mass loss, heat release and Ea of about 84.8%, 1474.18 and 88.76 kJ·mol–1, respectively. Of the seven metal oxides studied as catalysts, Al2O3, V2O5 and Fe2O3 have significant catalytic effects on an HAN/PVA-based propellant, in lowering the decomposition temperature, with Ea changing from 88.8 to 83.7, 85.6 and 113.6 kJ·mol–1, respectively. The f(α) of both HAN/PVA and HAN/PVA/Al2O3 samples can be expressed as f(α) = (1 – α)2, whereas f(α) = α or f(α) = α/2 fit well for the HAN/PVA/V2O5 and HAN/PVA/Fe2O3 samples.
Źródło:
Central European Journal of Energetic Materials; 2021, 18, 3; 322-338
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Upregulation of GRP78 and caspase-12 in diastolic failing heart
Autorzy:
Sun, Yingying
Liu, Guanghui
Song, Tao
Liu, Fang
Kang, Weiqiang
Zhang, Yun
Ge, Zhiming
Powiązania:
https://bibliotekanauki.pl/articles/1040708.pdf
Data publikacji:
2008
Wydawca:
Polskie Towarzystwo Biochemiczne
Tematy:
caspase-12
diastolic heart failure
GRP78; hypertension
apoptosis
Opis:
Background: The endoplasmic reticulum (ER) fulfills multiple cellular functions. Various stimuli can potentially cause ER stress (ERS). ERS is one of the intrinsic apoptosis pathways and apoptosis plays a critical role in hypertension. Glucose regulated protein 78 (GRP78) has been widely used as a marker for ERS and caspase-12 mediated apoptosis was a specific apoptotic pathway of ER. The expression of GRP78 and caspase-12 remains poorly understood in the diastolic heart failure resulting from hypertension. Methods: We used spontaneously hypertensive rats (SHRs) to establish a model of diastolic heart failure, and performed immunohistochemistry, western blot, and real-time PCR to analyze GRP78 and caspase-12. Results: We found that GRP78 and caspase-12 had enhanced expression at protein and mRNA levels. Conclusions: These results suggest that GRP78 and caspase-12 were upregulated in cardiomyocytes and ERS can contribute to cardiac myocyte apoptosis in the diastolic heart failure resulting from hypertension.
Źródło:
Acta Biochimica Polonica; 2008, 55, 3; 511-516
0001-527X
Pojawia się w:
Acta Biochimica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Path following control of the underactuated USV based on the improved line-of-sight guidance algorithm
Autorzy:
Liu, T.
Dong, Z.
Du, H.
Song, L.
Mao, Y.
Powiązania:
https://bibliotekanauki.pl/articles/259559.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
unmanned surface vessel (USV)
path following control
Serret-Frenet coordinate frame
underactuated system
improved lineof-sight guidance algorithm
nonlinear backstepping method
Opis:
The path following control problem of the underactuated unmanned surface vessel (USV) is studied in this paper. An improved line-of-sight (LOS) guidance algorithm is proposed which can adjust adaptively based on the path following error. The global asymptotically stable path following controller is designed based on the nonlinear backstepping method and the Lyapunov stability theory. Firstly, the USV path following error model is established in the Serret-Frenet (SF) coordinate frame. The path following error in the inertial coordinate frame is transformed into the SF coordinate frame, which is used to define the path following control problem. Secondly, inspired by the traditional LOS guidance algorithm, the longitudinal path following error in the SF coordinate frame is introduced into the improved LOS guidance algorithm. This allows the algorithm to adjust adaptively to the desired path. Thirdly, in order to solve the underactuated problem of the USV path following control system, the tangential velocity of the desired path is designed as a virtual input. The underactuated problem is converted to a virtual fully actuated problem by designing the virtual control law for the tangential velocity. Finally, by combining backstepping design principles and the Lyapunov stability theory, the longitudinal thrust control law and the yaw torque control law are designed for the underactuated USV. Meanwhile, the global asymptotic stability of the path following error is proved. Simulation experiments demonstrate the effectiveness and reliability of the improved LOS guidance algorithm and the path following controller.
Źródło:
Polish Maritime Research; 2017, 1; 3-11
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Calculation Method for the Bandgap of Antimonide Based Multicomponent Alloys
Autorzy:
An, N.
Liu, C.
Fan, C.
Dong, X.
Song, Q.
Powiązania:
https://bibliotekanauki.pl/articles/1030612.pdf
Data publikacji:
2018-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.05.Ea
42.55.Px
81.15.Hi
Opis:
As the most important material parameter of semiconductor, bandgap is necessary to be investigated to meet the design requirements of the high-performance optoelectronic devices. A new method of is proposed to calibrate the bandgap of antimonide based multi-component alloys with considering the effect of spin-orbit splitting off bands and the doublet degeneracy of valance band on the bandgaps of Sb-containing materials. A correction factor is introduced in the conventional calculation, and the spin-orbit splitting method is proposed. Besides, the In_xGa_{1-x}As_ySb_{1-y} films with different compositions are grown on GaSb substrates by molecular beam epitaxy, and the corresponding bandgaps are obtained by photoluminescence to test the accuracy and reliability of this new method. An error rate analysis reveals that the α calculated by the spin-orbit splitting correction method is decreased to 2%, almost one order of magnitude smaller than the Moon method, which means that the new method can calculate the antimonide multicomponent more accurately with some applicability. This work can give a reasonable interpretation for the reported results and beneficial to tailor the antimonides properties and optoelectronic devices.
Źródło:
Acta Physica Polonica A; 2018, 133, 1; 118-120
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An adaptive Kalman filter for online monitoring of mine wind speed
Adaptacyjny filtr Kalmana do ciągłego monitorowania prędkości przepływu powietrza kopalnianego
Autorzy:
Huang, De
Liu, Jian
Deng, Lijun
Li, Xuebing
Song, Ying
Powiązania:
https://bibliotekanauki.pl/articles/219283.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
prędkości przepływu powietrza kopalnianego
laserowy system Dopplerowski do rejestracji prędkości (LDV-Laser Doppler Velocimetry)
filtr Kalmana
maksymalizacja wartości oczekiwanej
układ ciągłego monitorowania
Opis:
The underground complicated testing environment and the fan operation instability cause large random errors and outliers of the wind speed signals. The outliers and large random errors result in distortion of mine wind speed monitoring, which possesses safety hazards in mine ventilation system. Application of Kalman filter in velocity monitoring can improve the accuracy of velocity measurement and eliminate the outliers. Adaptive Kalman Filter was built by automatically adjusting process noise covariance and measurement noise covariance depending on the differences between measured and expected speed signals. We analyzed the fluctuation of airflow flow using data of wind speed flow and distribution characteristics of the tunnel obtained by the Laser Doppler Velocimetry system (LDV) studies. A state-space model was built based on the tunnel airflow fluctuations and wind speed signal distribution. The adaptive Kalman Filter was calculated according to the actual measurement data and the Expectation Maximization (EM) algorithm. The adaptive Kalman filter was used to shield fluid pulsation while preserving system-induced fluctuations. Using the Kalman filter to treat offline wind speed signal acquired by LDV, the reliability of Kalman filter wind speed state model and the characteristics of adaptive Kalman Filter were investigated. Result s showed that the adaptive Kalman filter effectively eliminated the outliers and reduced the root-mean-squares error (RMSE), and the adaptive Kalman filter had better performance than the traditional Kalman filter in eliminating outliers and reducing RMSE. Field experiments in online wind speed monitoring were conducted using the optimized adaptive Kalman Filter. Results showed that adaptive Kalman filter treatment could monitor the wind speed with smaller RMSE compared with LVD monitor. The study data demonstrated that the adaptive Kalman filter is reliable and suitable for online signal processing of mine wind speed monitor.
Złożoność środowiska w którym prowadzone są pomiary prędkości powietrza w warunkach ko-palni podziemnych i niestabilność pracy wentylatorów kopalnianych mogą generować znaczne błędy losowe w rejestrowanych przebiegach sygnałów prędkości przepływu oraz powodować pojawianie się wartości oddalonych. Rejestrowane wartości oddalone oraz znaczne błędy losowe powodują wypaczenie przebiegów sygnałów rejestrowanych przez system monitorowania prędkości przepływu powietrza kopalnianego, stwarzając poważne zagrożenie dla bezpieczeństwa pracy i właściwego funkcjonowania systemu wentylacji. Zastosowanie filtru Kalmana w systemie monitorowania prędkości przepływu powietrza kopalnianego poprawia dokładność pomiarów i eliminuje występowanie wartości oddalonych. Adaptacyjny filtr Kalmana opracowano w oparciu o regulację kowariancji sygnału szumu procesowego i szumu pomiarowego w zależności od różnicy pomiędzy zmierzonymi a oczekiwanymi wartościami sygnału prędkości przepływu powietrza. Przeanalizowano wahania prędkości przepływu powietrza na podstawie charakterystyk prędkości przepływu i jej rozkładu otrzymanych z badań prowadzonych przy wykorzystaniu laserowych systemów Dopplerowskich do rejestrowania prędkości LDV (Laser Doppler Velocimetry). Zbudowano model przestrzeni stanu uwzględniający fluktuacje prędkości przepływu powietrza w tunelu oraz rozkład zarejestrowanych sygnałów prędkości przepływu powietrza kopalnianego. Obliczenia adaptacyjnego filtru Kalmana prowadzono w oparciu o bieżące dane pomiarowe, z wykorzystaniem algorytmu maksymalizacji wartości oczekiwanej (EM). Filtr adaptacyjny użyty został do wyrównania pulsacji przepływu powietrza, przy zachowaniu wszelkich zarejestrowanych fluktuacji wywołanych pracą układu. Filtr Kalmana wykorzystany został do obróbki sygnałów prędkości przepływu powietrza uzyskanych z systemu pomiaru prędkości LDV. Zbadano pewność i niezawodność modelu przestrzeni stanu prędkości przepływu powietrza uzyskanego z wykorzystaniem filtru i przeanalizowano charakterystyki adaptacyjnego filtra Kalmana. Wyniki wskazały, że zastosowanie filtru skutecznie eliminuje wartości oddalone i prowadzi do zmniejszenia wartości błędu średniokwadratowego. Wykazano także, że filtra adaptacyjny Kalmana ma wyższą skuteczność od tradycyjnych filtrów Kalmana w zakresie eliminacji wartości oddalonych i redukcji błędu średniokwadratowego. Prowadzono ciągły monitoring prędkości przepływu powietrza kopalnianego w warunkach polowych z wykorzystaniem zoptymalizowanego adaptacyjnego filtru Kalmana. Zarejestrowane wyniki wskazują, że zastosowanie filtra adaptacyjnego do obróbki sygnału prędkości przepływu prowadzi do uzyskania niższych wartości błędu średniokwadratowego niż w systemach monitoringu LVD. Zebrane w trakcie badań wyniki wykazały pewność i skuteczność działania filtra adaptacyjnego przy jego zastosowaniu do ciągłego monitorowania prędkości przepływu powietrza w kopalniach.
Źródło:
Archives of Mining Sciences; 2019, 64, 4; 813-827
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of Pb(II) by the resistant Enterobacter sp. : Investigated by kinetics, equilibrium and thermodynamics
Autorzy:
Liu, Lei
Xia, Mengya
Hao, Jianwen
Xu, Haoxi
Song, Wencheng
Powiązania:
https://bibliotekanauki.pl/articles/2073764.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Pb(II)
biosorption
enterobacter sp.
kinetics
thermodynamics
Opis:
The Pb(II)-resistant bacterium was isolated from heavy metal-contained soils and used as a biosorbent to remove Pb(II). The strain was identified as Enterobacter sp. based on the 16S rRNA sequence analysis. The effect of biosorption properties (pH value, Pb(II) concentration, bacterial concentration and temperature) on Pb(II) was investigated by batch experiments. Results of FTIR and XPS showed that the biosorption process mainly involved some oxygen-containing groups (-OH and -COOH groups). The experimental results and equilibrium data were fitted by pseudo-second-order kinetic model and Langmuir model, respectively. The experimental biosorption isotherms fitted the Langmuir model, and the maximum biosorption capacity was 40.75 mg/g at 298 K. The calculated ΔGо and ΔHо were –4.06 and 14.91(kJ/mol), respectively, which indicated that biosorption process was spontaneous and endothermic. Results show that Enterobacter sp. will be an efficient biosorbent for Pb(II) removal.
Źródło:
Archives of Environmental Protection; 2021, 47, 3; 28--36
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Utilization of N-carboxymethyl chitosan as a selective depressant for talc in flotation of chalcopyrite
Autorzy:
Liu, Cheng
Feng, Qiming
Shi, Qing
Zhang, Wencai
Song, Shaoxian
Powiązania:
https://bibliotekanauki.pl/articles/110512.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
chalcopyrite
talc
flotation separation
N-carboxymethyl chitosan
Opis:
Flotation separation of chalcopyrite from talc is difficult because of the natural hydrophobicity of two minerals. In this work, the flotation separation of chalcopyrite from talc using N-carboxymethyl chitosan as a depressant for talc was studied. The micro-flotation results indicated that the flotation separation of chalcopyrite from talc cannot be realized effectively at pH 9 with low concentration of N-carboxymethyl chitosan, in the presence of calcium ions, talc was more efficiently depressed by N-carboxymethyl chitosan, while the chalcopyrite recovery was not influenced. Contact angle, zeta potential and adsorption results showed that Ca2+ and CaOH+ absorbed on the talc surface and increased the absorption amount of N-carboxymethyl chitosan on the mineral surface, and increased hydrophilicity of talc surface, resulting the selective depression for talc in chalcopyrite flotation.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 1; 108-115
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of co-disposal of sludge based on TTF-type precalciner on NOx emissions
Autorzy:
Liang, Ruru
Yuan, Guanglei
Liu, Renping
Duan, Erhong
Song, Jiale
Powiązania:
https://bibliotekanauki.pl/articles/27323978.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
nitric oxide
cement production
ANSYS FLUENT
precalciner
tlenek azotu
produkcja cementu
prekalcynator
Opis:
To reduce the emission of nitrogen oxides (NOx) during the co-disposal of sludge in a TTF-type precalciner, an optimized co-disposal process of a TTF-type precalciner has been implemented in a cement plant in Hebei. The model was built using ANSYS FLUENT software. The effects of three single-factor perspectives (sludge input ratio, gas flow rate, and tertiary air temperature on NO concentration) were investigated. The response surface method of Box–Behnken design was used. When the sludge ratio increased from 0 to 25%, the NO concentration at the outlet was 122–297 mg/m³. Meanwhile, it increased from 192 mg/ m³ to 241 mg/ m³ since the airflow increased from 95 m³/s to 122 m³/s. The maximum NO concentration was 192 mg/ m³ when the tertiary air temperature was 1170 K. The inter-action between airflow and sludge ratio was more significant than any other interaction between other conditions (P < 0.05). Finally, the optimum conditions were a sludge ratio of 5%, airflow 109 m³/s, and tertiary air temperature 1280 K. NO concentration was 166.9 mg/m³ under this condition.
Źródło:
Environment Protection Engineering; 2023, 49, 3; 53--68
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A dual-stator brushless doubly-fed generator for wind power application
Autorzy:
Liu, Hao
Song, Yakai
Bai, Chunlan
He, Guofeng
Yin, Xiaoju
Powiązania:
https://bibliotekanauki.pl/articles/27309959.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
doubly-fed machine
dual-stator
electromagnetic analysis
operational characteristics modes
wind power generation
Opis:
A novelty dual-stator brushless doubly-fed generator (DSBDFG) with magnetic-barrier rotor structure is put forward for application in wind power. Compared with a doubly-fed induction generator, the DSBDFG has virtues of high reliability and low maintenance costs because of elimination of brush and sliprings components. Therefore, the proposed structure has tremendous potential as a wind power generator to apply in wind power. According to the operating principle of electric machine, the DSBDFG is studied in wind power application. At first, the topology, the winding connecting, the rotor structure, the power flow chart of different operating models and the variable speed capability of electric machine are discussed and analyzed. Then, a 50 kW DSBDFG is designed. Based on the principal dimension of the design electric machine, the electromagnetic characteristics of the DSBDFG with different running modes are analyzed and calculated to adopt the numerical method. From the result, it meets the requests of electromagnetic consistency and winding connecting in the design electric machine. Meanwhile, it confirms the proposed DSBDFG has the strong ability of speed regulation.
Źródło:
Archives of Electrical Engineering; 2023, 72, 4; 1073--1087
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reconstruction algorithm for obtaining the bending deformation of the base of heavy-duty machine tool using inverse Finite Element Method
Autorzy:
Liu, M.
Zhang, X.
Song, H.
Wang, J.
Zhou, S.
Powiązania:
https://bibliotekanauki.pl/articles/221566.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
inverse Finite Element Method
bending deformation
heavy-duty machine tool
reconstruction algorithm
statically indeterminate structure
Opis:
The field of mechanical manufacturing is becoming more and more demanding on machining accuracy. It is essential to monitor and compensate the deformation of structural parts of a heavy-duty machine tool. The deformation of the base of a heavy-duty machine tool is an important factor that affects machining accuracy. The base is statically indeterminate and complex in load. It is difficult to reconstruct deformation by traditional methods. A reconstruction algorithm for determining bending deformation of the base of a heavy-duty machine tool using inverse Finite Element Method (iFEM) is presented. The base is equivalent to a multi-span beam which is divided into beam elements with support points as nodes. The deflection polynomial order of each element is analysed. According to the boundary conditions, the deformation compatibility conditions and the strain data measured by Fiber Bragg Grating (FBG), the deflection polynomial coefficients of a beam element are determined. Using the coordinate transformation, the deflection equation of the base is obtained. Both numerical verification and experiment were carried out. The deflection obtained by the reconstruction algorithm using iFEM and the actual deflection measured by laser displacement sensors were compared. The accuracy of the reconstruction algorithm is verified.
Źródło:
Metrology and Measurement Systems; 2018, 25, 4; 727-741
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Detection of self-biting behavior of mink by loop-mediated isothermal amplification (LAMP) and sequence-characterized amplified regions (SCAR)
Autorzy:
Liu, Z.Y.
Song, S.S.
Huo, Z.S.
Song, X.C.
Cong, B.
Yang, F.H.
Powiązania:
https://bibliotekanauki.pl/articles/2087715.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mink
self-biting
loop-mediated isothermal amplification
sequence-characterized amplified regions
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 2; 371-376
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analytical solution for one-dimensional consolidation of unsaturated soils under dynamic load
Autorzy:
Liu, Zhi-Yi
Song, Yu
Zhou, Feng-Xi
Wang, Li-Ye
Powiązania:
https://bibliotekanauki.pl/articles/2200882.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
unsaturated soil
consolidation characteristic
dynamic load
analytical solution
numerical calculation
Opis:
Firstly, in this paper, based on the theory of the porous elastic medium and combined with the effective stress principle of unsaturated soil, a set of governing equations is established to describe consolidation of the unsaturated soil. Secondly, an analytical expression under any dynamic loads is obtained with the help of Laplace integral transformation. Finally, analysis of numerical examples under specific boundary conditions is made to discuss one-dimensional consolidation characteristics under harmonic loads and the influence of factors on the consolidation characteristics of unsaturated soil, such as excitation frequency and initial saturation.
Źródło:
Journal of Theoretical and Applied Mechanics; 2023, 61, 1; 11--22
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Catalytic decomposition of toluene over La1-xSr xMnO3/palygorskite synthesized catalysts
Autorzy:
Song, L.
Chen, T.
Chen, D.
Chen, Y.
Xie, J.
Liu, H.
Powiązania:
https://bibliotekanauki.pl/articles/207996.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
catalysts
manganese
manganese oxide
toluene
transmission electron microscopy
X ray diffraction
Palygorskite
katalizatory
mangan
tlenek manganu
toluen
transmisyjna mikroskopia elektronowa
dyfrakcja promieniowania rentgenowskiego
Opis:
Palygorskite (PG) supported La1-xSrxMnO3 catalysts were fabricated by copreripitation. The catalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), specific surface area (SSA) and H2 temperature programmed reduction (H 2-TPR). Catalytic activity for VOCs was examined by using toluene as a model compound. The results show that the surface area as well as mechanical strength of catalysts increase substantially after catalysts loaded in PG. XRD patterns show that after calcination at 700 0C, PG as a support in 9% LaMn03/PG and 9% La0.7Sr0.3MnO3/PG was transformed into amorphous phase and the morphology was not destroyed. It was well established that the main reductive components are factually Mn(III) or Mn(IV) oxides in catalysts based on the results of TPR. It was also found that Mn(IV) increases while Mn(III) reduces responding with the increasing amount of Sr. Toluene conversion rate of as-preparedμ% La1-xSr xMnO3/PG increases with the increasing values of x and μ when x=0-0.3 and μ = 3-9%. Toluene can be converted completely at 285 0C by 9% La0.7Sr0.3MnO3/PG catalyst while no significant change was observed after addition on the doping and loading amount of Sr. During a 100 h stability experiment of 9% La 0.7Sr0.3MnO3/PG catalyst, toluene removal was found to be above 95%.
Źródło:
Environment Protection Engineering; 2013, 39, 3; 31-42
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of Hexaamidocyclotriphosphazene on the Flame Retardancy of Paper
Wpływ hexaamidocyklotrifosfazenu na zmniejszenie palności papieru
Autorzy:
Tang, L.
Bi, W.
Ke, Y.
Song, H.
He, W.
Liu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/232082.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
hexaamidocyclotriphosphazene
flame retardancy
paper
flame retarded paper
hexaamidocyklotrifosfazen
ognioodporność
palność papieru
Opis:
In this paper, the flame retardancy of hexaamidocyclotriphosphazene (HACTP) in paper was studied by limiting oxygen index measurement, the vertical burning test and cone calorimetry test. Meanwhile the mechanism was discussed by the analysis of residues obtained in the cone calorimeter test. The experimental results revealed that HACTP had excellent flame retardancy in paper.
Badano zmniejszenie palności papieru stosując hexaamidocyklotrifosfazen (HACTP) poprzez indeks tlenowy, test pionowego palenia, i test kalorymetru stożkowego. Badano również mechanizm ograniczenia palności poprzez analizę resztek uzyskanych z testu kalorymetru stożkowego. Eksperymenty wykazały, że HACTP ma wybitny wpływ na zmniejszenie palności papieru.
Źródło:
Fibres & Textiles in Eastern Europe; 2016, 4 (118); 148-152
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Data-driven temporal-spatial model for the prediction of AQI in Nanjin
Autorzy:
Zhao, Xuan
Song, Meichen
Liu, Anqi
Wang, Yiming
Wang, Tong
Cao, Jinde
Powiązania:
https://bibliotekanauki.pl/articles/1837414.pdf
Data publikacji:
2020
Wydawca:
Społeczna Akademia Nauk w Łodzi. Polskie Towarzystwo Sieci Neuronowych
Tematy:
air quality prediction
k-Nearest Neighbor
BP neural network
non-monitoring stations
Opis:
Air quality data prediction in urban area is of great significance to control air pollution and protect the public health. The prediction of the air quality in the monitoring station is well studied in existing researches. However, air-quality-monitor stations are insufficient in most cities and the air quality varies from one place to another dramatically due to complex factors. A novel model is established in this paper to estimate and predict the Air Quality Index (AQI) of the areas without monitoring stations in Nanjing. The proposed model predicts AQI in a non-monitoring area both in temporal dimension and in spatial dimension respectively. The temporal dimension model is presented at first based on the enhanced k-Nearest Neighbor (KNN) algorithm to predict the AQI values among monitoring stations, the acceptability of the results achieves 92% for one-hour prediction. Meanwhile, in order to forecast the evolution of air quality in the spatial dimension, the method is utilized with the help of Back Propagation neural network (BP), which considers geographical distance. Furthermore, to improve the accuracy and adaptability of the spatial model, the similarity of topological structure is introduced. Especially, the temporal-spatial model is built and its adaptability is tested on a specific non-monitoring site, Jiulonghu Campus of Southeast University. The result demonstrates that the acceptability achieves 73.8% on average. The current paper provides strong evidence suggesting that the proposed non-parametric and data-driven approach for air quality forecasting provides promising results.
Źródło:
Journal of Artificial Intelligence and Soft Computing Research; 2020, 10, 4; 255-270
2083-2567
2449-6499
Pojawia się w:
Journal of Artificial Intelligence and Soft Computing Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The mechanism study on deep eutectic solvent for desilication of magnetite by reverse flotation
Autorzy:
He, Zhan
Liu, Cai
Mei, Guangjun
Zhao, Yuanyuan
Cheng, Qian
Song, Xianwei
Powiązania:
https://bibliotekanauki.pl/articles/1845237.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
reverse flotation
deep eutectic solvents collector
desilication
magnetie
quartz
Opis:
Magnetite reverse flotation using a new deep eutectic solvent synthesized by lactic acid and CTAC as the collector has been investigated in this work. The flotation test results were compared with dodecylamine. The CTAC/lactic acid DES increased the grade of total iron to 66.69%, and the reduce quartz content to 6.67%, which were preferable to dodecylamine (the grade of Fe in the concentrate is 63.47%, and the grade of quartz in the concentrate is 9.13%). The depression performance and adsorption mechanism of CTAC/lactic acid DES on surface of magnetite and quartz are investigated by FT-IR, zeta potential and XPS. The results show that the adsorption of CTAC/lactic acid DES on quartz surface is more effective than that of magnetite. Therefore, deep eutectic solvent is an effective reagent for reverse flotation of magnetite as collector.
Źródło:
Physicochemical Problems of Mineral Processing; 2021, 57, 6; 12-22
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies