Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Li, K." wg kryterium: Autor


Tytuł:
Two-Probe Measurements of Electron Transport in GaN:Si/(Ga,Mn)N/GaN:Si Spin Filter Structures
Autorzy:
Kalbarczyk, K.
Foltyn, M.
Grzybowski, M.
Stefanowicz, W.
Adhikari, R.
Li, Tian
Kruszka, R.
Kamińska, E.
Piotrowska, A.
Bonanni, A.
Dietl, T.
Sawicki, M.
Powiązania:
https://bibliotekanauki.pl/articles/1398574.pdf
Data publikacji:
2016-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
72.25.Dc
73.40.Cg
73.43.Qt
78.55.Cr
Opis:
Results of two-probe magnetoresistance studies in GaN:Si/(Ga,Mn)N/GaN:Si prospective spin filter structures are reported. It is postulated that transport characteristics are strongly influenced by highly conductive threading dislocations and that shrinking of the device size partially mitigates the issue. Simultaneously, maxima at ≈1500 Oe on overall weak, up to 2%, negative magnetoresistance are seen at low temperature, whose origin has been tentatively assigned to effects taking place at the contacts areas.
Źródło:
Acta Physica Polonica A; 2016, 130, 5; 1196-1198
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Theoretical Analysis of the TE Mode Cerenkov Type Second Harmonic Generation in Ion-Implanted X-Cut Lithium Niobate Planar Waveguides
Autorzy:
Du, G.
Li, G.
Zhao, S.
Qiao, W.
Yang, K.
An, J.
Li, M.
Wang, J.
Wang, W.
Powiązania:
https://bibliotekanauki.pl/articles/1808109.pdf
Data publikacji:
2009-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.72.Dd
42.82.Et
Opis:
We present a study of the Cerenkov configuration second harmonic generation in X-cut ion-implanted lithium niobate waveguides. An approximate solution of conversion efficiency is given and plotted which shows that it is very sensitive to the waveguide depth and pump wavelength. The results can be used in the design of waveguides for the efficient second harmonic generation in the Cerenkov configuration.
Źródło:
Acta Physica Polonica A; 2009, 115, 3; 685-689
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of temperature and nitrogen deprivation on cell morphology and physiology of Symbiodinium
Autorzy:
Pasaribu, B.
Li, Y.-S.
Kuo, P.-C.
Lin, I.-P.
Tew, K.-S.
Tzen, J.T.C.
Liao, Y.K.
Chen, C.-S.
Jiang, P.-L.
Powiązania:
https://bibliotekanauki.pl/articles/49111.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Źródło:
Oceanologia; 2016, 58, 4
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis and Stab Resistance of Shear Thickening Fluid (STF) Impregnated Glass Fabric Composites
Oporność na przebicie kompozytów z tkanin z włókien szklanych nasyconych cieczą gęstniejącą pod wpływem ścinania
Autorzy:
Yu, K.
Cao, H.
Qian, K.
Jiang, L.
Li, H.
Powiązania:
https://bibliotekanauki.pl/articles/234322.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
ścinanie płynu
reologiczne własności
tkaniny
szkło
kompozyty
mechanizm przebicia
shear thickening fluid
rheological property
glass fabrics
composites
impact behavior
Opis:
A shear thickening fluid (STF) was prepared successfully and its rheological behavior was investigated. Glass fabrics were soaked in STF/ethanol solution to prepare STF-glass fabric composites. The morphologies of the STF-glass fabric composites were observed by SEM. Quasi-static stab-resistant tests were carried out on both the neat glass fabrics and STF-glass fabric composites using a knife based on the areal density. The corresponding puncture and strengthen mechanisms were also investigated.
Przygotowano ciecz gęstniejącą pod wpływem ścinania (STF) i zbadano jej właściwości reologiczne. Tkaniny z włókien szklanych były nasycane roztworem STF/etanol dla przygotowania kompozytów. Morfologię kompozytów badano za pomocą skaningowej mikroskopii elektronowej. Prowadzono quasi-statyczne badania na przebicie na tkaninach szklanych nienasączonych oraz na opracowanych kompozytach za pomocą noża o specjalnie zaprojektowanej konstrukcji. Niezależnie od testów porównawczych badano również mechanizm przebicia.
Źródło:
Fibres & Textiles in Eastern Europe; 2012, 6A (95); 126-128
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
SYBR Green-based real-time polymerase chain reaction assay for detection of porcine parvovirus 6 in pigs
Autorzy:
Sun, P.
Bai, C.X.
Zhang, D.
Wang, J.
Yang, K.K.
Cheng, B.Z.
Li, Y.D.
Wang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/2087328.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
porcine parvovirus 6
real-time polymerase chain reaction
SYBR Green
Źródło:
Polish Journal of Veterinary Sciences; 2020, 23, 2; 197-202
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surfactant Effect on Synthesis of Nanocrystalline La$\text{}_{x}$Sr$\text{}_{1-x}$MnO$\text{}_{3}$ by Hydrothermal Method
Autorzy:
Sin, W. L.
Wong, K. H.
Li, P. Li.
Powiązania:
https://bibliotekanauki.pl/articles/2047246.pdf
Data publikacji:
2007-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.47.Lx
82.70.Uv
61.10.Nz
Opis:
Crystalline La$\text{}_{x}$Sr$\text{}_{1-x}$MnO$\text{}_{3}$ was prepared by a hydrothermal route in the presence of surfactant. The cationic surfactant of cetyltrimethylammonium bromide as a template is used to regulate the nucleation and crystal growth. The as-synthesized product was characterized by X-ray diffraction and transmission electron microscopy. Nanosized and uniform rod-like monocrystals of La$\text{}_{x}$Sr$\text{}_{1-x}$MnO$\text{}_{3}$ were obtained. Their magnetic properties were studied using a vibrating sample magnetometer. Our results reveal that the use of surfactant helps to lower the processing temperature and to speed up the formation and crystallization of La$\text{}_{x}$Sr$\text{}_{1-x}$MnO$\text{}_{3}$. The surfactant also provides us an additional means of controlling the nanocrystalline size and maintaining the stoichiometry of the as-prepared nanocrystallites.
Źródło:
Acta Physica Polonica A; 2007, 111, 1; 165-171
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Single and multidrug filomicelles as anticancer drug delivery system
Autorzy:
Jelonek, K.
Kasperczyk, J.
Li, S.
Kaczmarczyk, B.
Orchel, A.
Musiał-Kulik, M.
Powiązania:
https://bibliotekanauki.pl/articles/284619.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
drug delivery system
filomicelles
polymeric Micelles
Źródło:
Engineering of Biomaterials; 2016, 19, 138; 53
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Short-term variation in zooplankton community from Daya Bay with outbreaks of Penilia avirostris
Autorzy:
Li, K.
Yin, J.
Tan, Y.
Huang, L.
Song, X.
Powiązania:
https://bibliotekanauki.pl/articles/47644.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
zooplankton
Penilia avirostris
outbreak
short-term variability
nuclear power plant
temporal variation
water temperature
salinity
chlorophyll a
aquaculture area
Daya Bay
Źródło:
Oceanologia; 2014, 56, 3
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ship route planning using historical trajectories derived from AIS Data
Autorzy:
He, Y. K.
Zhang, D.
Zhang, J. F.
Zhang, M. Y.
Li, T. W.
Powiązania:
https://bibliotekanauki.pl/articles/116536.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
AIS Data
Automatic Identification System (AIS)
route planning
historical trajectories
AIS messages
marine traffic
Dijkstra algorithm
ant colony algorithm
Opis:
Ship route planning is one of the key issues in enhancing traffic safety and efficiency. Many route planning methods have been developed, but most of them are based on the information from charts. This paper proposes a method to generate shipping routes based on historical ship tracks. The ship's historical route information was obtained by processing the AIS data. From which the ship turning point was extracted and clustered as nodes. The ant colony algorithm was used to generate the optimize route. The ship AIS data of the Three Gorges dam area was selected as a case study. The ships’ optimized route was generated, and further compared with the actual ship's navigation trajectory. The results indicate that there is space of improvement for some of the trajectories, especially near the turning areas.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2019, 13, 1; 69-76
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Safety problem of cavity under open pit bench
Zagadnienie bezpieczeństwa zapadlisk pod warstwą wybierania w kopalni odkrywkowej
Autorzy:
Liu, X.
Li, X.
Gong, F.
Liu, K.
Powiązania:
https://bibliotekanauki.pl/articles/219373.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cavity
open pit
laser scanning
stability analysis
acoustic emission monitoring
pustki
kopalnie odkrywkowe
skanowanie laserowe
analiza stabilności
monitorowanie emisji akustycznej
Opis:
Some open pits in China are severely threatened by hidden cavities under benches which are always inaccessible and unmapped. The first thing to be well considered is safe and precise cavity detection, as the conventional detection methods cannot output a clear cavity vision, a three-dimensional laser measurement system is employed to perform detection, which is deployed from the surface through boreholes. The results from the scanner demonstrated very well the detailed level of information that can be collected In a cavity using this method, with the cavities’ layout under various benches being fully mapped. As detected cavities are always in horizontal and vaulted roof shape, two different theoretical calculation methods are proposed to analyze the cap rock stability for different roof shape. And also, the three-dimensional solid model generated through scanned laser data is used for stability numerical simulation by converting the data format into the one that recognized in corresponding software. Furthermore, acoustic emission technique is adopted to carry out long term real time rupture monitoring in cap rock, and four kinds of typical monitoring results are discussed which represent the rupture behavior in cap rock of unstable cavity, stable cavity, cavity with large working drill above and cavity beside explosion site. Thus, a complete safety evaluation system for such cavity will be established to ensure safe operation above.
W wielu kopalniach odkrywkowych na terenie Chin powstało zagrożenie wskutek istnienia ukrytych pustek pod warstwami wybierania (ławami), część z nich jest trudno dostępna, a niektóre nie są nawet naniesione na mapach. Najważniejszą kwestią jest więc bezpieczna i dokładna lokalizacja pustek. Ponieważ konwencjonalne metody wykrywania nie są w stanie ujawnić dokładnego obrazu pustek, zastosowano trójwymiarowy laserowy system detekcji pustek, zakładany z powierzchni poprzez wywiercone otwory. Odczyty ze skanera ujawniły dokładne zarysy pustek. Z pomocą tej metody można dokładnie obrazować układy pustek pod warstwami wybierania (ławami). Ponieważ stropy w wykrywanych pustkach są zawsze poziome lub sklepione, zaproponowano dwie teoretyczne metody obliczania stabilność stropu dla różnych jego kształtów. Ponadto, na podstawie danych ze skanera wygenerowano model bryły trójwymiarowej, który wykorzystany został do numerycznych badań stabilności stropu poprzez przekształcenie formatu danych na format rozpoznawalny w zastosowanym oprogramowaniu. Zastosowano także techniki pomiary emisji akustycznej w długofalowym monitorowaniu spękań stropu w czasie rzeczywistym, przeanalizowano cztery rodzaje uzyskanych wyników opisujących zachowanie stropu w przypadku pustek niestabilnych, stabilnych, pustek ponad którymi wykonano otwory znacznych rozmiarów oraz pustek w pobliżu miejsc prowadzenia prac strzałowych. Opracowano w ten sposób pełny system oceny stabilności pustek zapewniający bezpieczne prowadzenie prac ponad nimi.
Źródło:
Archives of Mining Sciences; 2015, 60, 2; 565-580
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Restructuring of a zooplankton community by perturbation from a wind-forced coastal jet
Autorzy:
Pedersen, O.-P.
Tande, K.S.
Li, C.
Zhou, M.
Powiązania:
https://bibliotekanauki.pl/articles/47789.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
zooplankton
filament
intrusion
restructuring
mesoscale
perturbation
coastal region
Norway
transient wind
saline water
equivalent spherical diameter
Opis:
The impact of transient wind events on an established zooplankton community was observed during a field survey in a coastal region off northern Norway in May 2002. A transient wind event induced a coastal jet/filament intrusion of warm, saline water into our survey area where a semi-permanent eddy was present. There was an abrupt change in zooplankton community structure within 4–7 days of the wind event, with a change in the size structure, an increase in lower size classes less than 1 mm in equivalent spherical diameter (ESD) and a decrease in larger size classes greater than 1.5 mm in ESD. The slope of zooplankton biovolume spectra changed from −0.6 to −0.8, consistent with the size shifting towards smaller size classes. This study shows that even well established zooplankton communities are susceptible to restructuring during transient wind events, and in particular when wind forcing induces horizontal currents or filaments.
Źródło:
Oceanologia; 2010, 52, 3; 473-497
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Response of energy-size reduction to the control of circulating load in vertical spindle pulverizer
Autorzy:
Li, H.
He, Y.
Zhang, Y.
Ge, Z.
Xie, W.
Wang, S.
Li, K.
Powiązania:
https://bibliotekanauki.pl/articles/110803.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
circulating load control
response of energy-size reduction
mixture grinding
energy efficiency
Opis:
In the vertical spindle pulverizer (VSP), the large circulation ratio and high ash and sulfur contents in circulating load would result in intensive energy consumption and low grinding efficiency. Although the control of circulating load would help increase the energy efficiency, no quantitative study has been conducted due to the high temperature and pressure in the closed VSP. In this study, response of energy-size reduction to the control of circulating load was studied by the experimental simulation method. Coal mixtures with fine/coarse ratio of 11:1, 8:1 and 6:1 were ground by a lab-scale roller mill. Energy-size reductions of the coarse coal were compared to evaluate the influence of circulating load control. Results showed that the product with the coarse coal increased by 30% when the specific breakage energy was 1.0 kWht–1 as the circulation ratio decreased from 11 to 6. Meanwhile, a breakage characteristic index of the coarse coal was two times higher due to the cushioning effect of fines. Besides, decrease of circulation ratio led to increase of the breakage rate of coarse coal, and the energy saving improved by 57%. With the same energy input of 2.0 kWht-1, the yield of –0.09 mm pulverized fuel (PF) increased from 22 to 43%. Therefore, controlling the circulating load is an effective method to improve the breakage rate of coarse coal and energy efficiency for PF generation.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 793-801
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on the statistical characteristics of crosstalk in naval ships wiring harness based on Polynomial Chaos Expansion method
Autorzy:
Chi, Y.
Li, B.
Yang, X.
Wang, T.
Yang, K.
Gao, Y.
Powiązania:
https://bibliotekanauki.pl/articles/260090.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
naval ships wiring harness
crosstalk
Polynomial Chaos Expansion
statistical characteristics
Opis:
Crosstalk in wiring harness has been studied extensively for its importance in the naval ships electromagnetic compatibility field. An effective and high-efficiency method is proposed in this paper for analyzing Statistical Characteristics of crosstalk in wiring harness with random variation of position based on Polynomial Chaos Expansion (PCE). A typical 14-cable wiring harness was simulated as the object of research. Distance among interfering cable, affected cable and GND is synthesized and analyzed in both frequency domain and time domain. The model of naval ships wiring harness distribution parameter was established by utilizing Legendre orthogonal polynomials as basis functions along with prediction model of statistical characters. Detailed mean value, mean square error, probability density function and reasonable varying range of crosstalk in naval ships wiring harness are described in both time domain and frequency domain. Numerical experiment proves that the method proposed in this paper, not only has good consistency with the MC method can be applied in the naval ships EMC research field to provide theoretical support for guaranteeing safety, but also has better time-efficiency than the MC method. Therefore, the Polynomial Chaos Expansion method.
Źródło:
Polish Maritime Research; 2017, S 2; 205-214
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research of lateral force of pipe conveyor belt’s vertical transport section
Autorzy:
Wang, S.
Guo, Y.-C.
Li, D. Y.
Hu, K.
Powiązania:
https://bibliotekanauki.pl/articles/223504.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
pipe belt conveyor
vertical transport
lateral force
discrete element simulation
experimental verification
przenośnik taśmowy
transport pionowy
siła boczna
symulacja
platforma doświadczalna
Opis:
In order to release the lateral force of pipe conveyor belt in vertical transportation, the thesis had a study of the lateral force of the conveyor belt. By making use of Janssen Principles and fractal theory, based on reasonable simplification, the author established a mathematical model of the lateral force in vertical transportation, and with the research foundation of the pipe belt conveyor for underground transportation, through solution analysis, the author found out that the change of material diameter would lead to nonlinear variation of the lateral force of the conveyor belt. Under the circumstances of different material diameter, discrete element method was adopted to simulate the lateral force of the conveyor belt, thus working out the distribution curve chart of the lateral force. To verify the reliability of the theory, the author built an experimental platform for pipe conveyor belt in vertical transportation, and experimented with five groups of materials in different diameter, working out the strain of lateral force of the characteristic conveyor belt; by comparing the theoretical result, the simulation result and the experimental result, it showed that the solution to relieving lateral force through optimization selection of material diameter put forward in this thesis was reasonable and effective. It provides theoretical reference for the design of pipe belt conveyor.
Źródło:
Archives of Transport; 2016, 37, 1; 67-75
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies