Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Li, Ji" wg kryterium: Autor


Tytuł:
Yellowfin tuna (Thunnusalbacares) fishing ground forecasting model based on bayes classifier in the South China Sea
Autorzy:
Zhou, W.
Li, A.
Ji, S.
Qiu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/258994.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
Bayes classifier
South China Sea
yellowfin tuna
fishing ground forecasting
Opis:
Using the yellowfin tuna (Thunnusalbacares,YFT)longline fishing catch data in the open South China Sea (SCS) provided by WCPFC, the optimum interpolation sea surface temperature (OISST) from CPC/NOAA and multi-satellites altimetric monthly averaged product sea surface height (SSH) released by CNES, eight alternative options based on Bayes classifier were made in this paper according to different strategies on the choice of environment factors and the levels of fishing zones to classify the YFT fishing ground in the open SCS. The classification results were compared with the actual ones for validation and analyzed to know how different plans impact on classification results and precision. The results of validation showed that the precision of the eight options were 71.4%, 75%, 70.8%, 74.4%, 66.7%, 68.5%, 57.7% and 63.7% in sequence, the first to sixth among them above 65% would meet the practical application needs basically. The alternatives which use SST and SSH simultaneously as the environmental factors have higher precision than which only use single SST environmental factor, and the consideration of adding SSH can improve the model precision to a certain extent. The options which use CPUE’s mean ± standard deviation as threshold have higher precision than which use CPUE’s 33.3%-quantile and 66.7%-quantile as the threshold
Źródło:
Polish Maritime Research; 2017, S 2; 140-146
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental study of the nonlinear behaviour of deep-sea mooring polyester fibre ropes
Autorzy:
Zhang, He
Zeng, Ji
Jin, Bowen
Chou, Chiate
Li, Hangyu
Dong, Hailei
Powiązania:
https://bibliotekanauki.pl/articles/34611198.pdf
Data publikacji:
2023
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
polyester fibre ropes
static stiffness
creep coefficient
long-term cyclic loads
dynamic stiffness
Opis:
Mooring ropes are essential components of ships and offshore floating structures and they are subjected to cyclic axial loads. This study investigates the evolution of the full-cycle stiffness of fibre polyester ropes under long-term static and dynamic loading. First, the static stiffness characteristics of the ropes, including the rope elongation properties at different stages, shrinkage rates, and creep coefficients after an idle period, are examined under static loads; an empirical formula for static stiffness is established. Second, the dynamic stiffness characteristics of the ropes are investigated under cyclic loads that are typical of platform production operations. The stabilities of the structure under different tensions are compared; the effects of mean tension, tension amplitude, and load cycle on the dynamic stiffness of the ropes are analysed and an empirical formula is established to predict the dynamic stiffness during the engineering design phase. The results of this study can be helpful for the rational design of deep-sea taut-leg mooring systems because they present the evolution of the full-cycle stiffness characteristics of mooring ropes.
Źródło:
Polish Maritime Research; 2023, 3; 153-162
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation of Insensitive RDX by Suspension Spray Technology and Its Characterization
Autorzy:
Yan, Xiang
Li, Xiao Dong
Zhou, Peng
Ji, Wei
Shi, Xiao Feng
Powiązania:
https://bibliotekanauki.pl/articles/358585.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
RDX
Estane 5703
suspension spray technology
detonation velocity
insensitivity
Opis:
A new insensitive and high energy explosive based on RDX was prepared by suspension spray technology using Estane 5703 as a binder (e-RDX). Scanning electron microscopy was used to characterize the morphology and particle size of the samples. The composite was analyzed by differential scanning calorimetry and X-ray photoelectron spectroscopy. Its impact sensitivity and detonation velocity were determined. For comparison, raw RDX, refined RDX (r-RDX) and solution spray dried RDX/Estane 5703 (e1-RDX) were also tested using these five methods. The SEM results showed that the e-RDX size was 1-3 μm. e1-RDX exhibited a spherical shape with some defects on the surface. The XPS results indicated that Estane 5703 can be successfully coated onto the surface of e-RDX. Compared to raw RDX, the drop height of r-RDX, e1-RDX and e-RDX was increased, being 16.5 cm, 32.9 cm and 58.4 cm, respectively. The activation energy of e-RDX is lower than that of raw RDX, but a little higher than that of e1-RDX. Compared to raw RDX, the detonation velocity of r-RDX, e1-RDX, w-RDX and e-RDX had decreased, being 110 m·s–1, 710 m·s–1, 410 m·s–1 and 210 m·s–1, respectively.
Źródło:
Central European Journal of Energetic Materials; 2019, 16, 2; 216-227
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
3D morphological reconstruction of the red blood cell based on two phase images
Autorzy:
Wang, Y
Li, Z
Ji, Y
Xu, Y
Bu, M
Powiązania:
https://bibliotekanauki.pl/articles/174332.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
phase imaging
red blood cell
3D morphological reconstruction
maximum entropy
Opis:
As an important component of blood cells, the red blood cell plays a vital role in many diseases such as malaria and so on. Although quantitative phase imaging techniques can be used for homogeneous cellular thickness distribution to obtain ideal results, they cannot achieve 3D morphological distribution. In this paper, a new method is presented to get a 3D morphology image of red blood cell. With this method, only two cellular quantitative phase images obtained from two orthogonal directions are needed as original information. By using the grid method, the sample is divided into many small phase cubes, and then we take a layer’s cubes into calculation so that the 3D problem could be transformed into a 2D problem to elaborate. Then it can be applied to the tomographic imaging combined with the maximum entropy method according to the two orthogonal phase images. This method has been proved by a simulation of red blood cell. The results show that cellular morphological distribution can be achieved in detail very well just based on only two orthogonal phase images.
Źródło:
Optica Applicata; 2015, 45, 2; 173-182
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation on co-pyrolysis of sewage sludge with coal
Autorzy:
Tan, Z.-X.
Ai, P.
Li, Y.-M.
Ji, X.-Y.
Feng, W.
Powiązania:
https://bibliotekanauki.pl/articles/207582.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coal
carbon dioxide
sewage sludge
co-pyrolysis
FTIR analysis
coal sludge
thermal reactions
węgiel
dwutlenek węgla
osady ściekowe
FTIR
szlam węglowy
reakcje termiczne
kopiroliza
piroliza osadów ściekowych
Opis:
Co-pyrolysis characteristics of sludge with coal and sludge briquetted with coal were studied by the TG-FTIR method. From TG data, weight loss of sludge briquetted was higher than that of sludge and sludge and coal which means that thermal reaction effect of sludge briquetted is better than those of other two materials. Gas products of pyrolysis were CO, CO2, H2O, alcohol, ketone, acid, hydrocarbon, amine and azine from the FTIR analysis. At last, evolving patterns of the pyrolyses and the yields of their gas products have been recorded, providing extremely important data on the mechanism of the process.
Źródło:
Environment Protection Engineering; 2014, 40, 1; 117-126
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Theoretical Predictions of Lattice Parameters and Mechanical Properties of Pentaerythritol Tetranitrate under the Temperature and Pressure by Molecular Dynamics Simulations
Autorzy:
Tan, J.J.
Hu, C.
Li, Y.
Ge, N.
Chen, T.
Ji, G.
Powiązania:
https://bibliotekanauki.pl/articles/1033453.pdf
Data publikacji:
2017-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
molecular dynamics
lattice parameter
equation of state
elasticity
mechanical properties
Opis:
Molecular dynamics simulations with condensed-phase optimized molecular potentials for atomistic simulation studies force field are performed to investigate the structure, equation of state, and mechanical properties of high energetic material pentaerythritol tetranitrate. The equilibrium structural parameters, pressure-volume relationship and elastic constants at ambient conditions agree excellently with experiments. In addition, fitting the pressure-volume data to the Birch-Murnaghan or Murnaghan equation of state, the bulk modulus B₀ and its first pressure derivative B'₀ are obtained. Moreover, the elastic constants are calculated in the pressure range of 0-10 GPa at room temperature and in the temperature range of 200-400 K at the standard pressure, respectively. By the Voigt-Reuss-Hill approximation, the mechanical properties such as bulk modulus B, shear modulus G, and the Young modulus E are also obtained successfully. The predicted physical properties under temperature and pressure can provide powerful guidelines for the engineering application and further experimental investigations.
Źródło:
Acta Physica Polonica A; 2017, 131, 2; 318-323
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
High-Pressure Phase Transitions and Thermodynamic Behaviors of Cadmium Sulfide
Autorzy:
Tan, J.
Li, Y.
Ji, G.
Powiązania:
https://bibliotekanauki.pl/articles/1493632.pdf
Data publikacji:
2011-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
71.15.Mb
65.40.-b
Opis:
The pressure-induced phase transitions of cadmium sulfide semiconductor in both zinc-blende and wurtzite structures are investigated by ab initio plane-wave pseudopotential density functional theory with the local density approximation. On the basis of the fourth-order Birch-Murnaghan equation of state, the phase transition pressures $P_{t}$ are determined by the enthalpy criterion. It is found that the phase transitions occur at pressure of 2.57 GPa (zinc blende-rocksalt structure) and 2.60 GPa (wurtzite-rocksalt structure), respectively. The equilibrium structural parameters, elastic constants, and phase transition pressures are calculated and compared with the experimental data available and other theoretical results. According to linear-response approach, the thermodynamic properties such as the free energy, enthalpy, entropy, and heat capacity are also obtained successfully from the phonon density of state.
Źródło:
Acta Physica Polonica A; 2011, 120, 3; 501-506
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ethnobotany of Acorus in China
Autorzy:
Shu, H.
Zhang, S.
Lei, Q.
Zhou, J.
Ji, Y.
Luo, B.
Hong, L.
Li, F.
Liu, B.
Long, C.
Powiązania:
https://bibliotekanauki.pl/articles/59160.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Botaniczne
Opis:
In China, species in the genus Acorus are used for many different purposes, viz., in traditional medicine, for rituals, and as ornamental plants. Acorus calamus (sweet flag) has been a symbolic plant in Chinese culture for many centuries and is used as a ceremonial object in festivals throughout the country. For other Acorus species in China, ethnobotanical records are few. During field investigations from 2006 to 2017, we interviewed 573 individuals representing ethnic groups such as the Miao, Yao, Buyi, Shui, Tujia, Dong, She, Maonan, Zhuang, Yi, and Han people. Various ethnobotanical approaches were adopted in the field surveys, including key informant interviews, semistructured interviews, participatory observation, direct observation, etc. The results have revealed a rich treasure trove of traditional knowledge on Acorus in China. Two species (A. macrospadiceus and A. gramineus) were used by ethnic groups as spices to add flavor to meat. Through the study found that all the species of Acorus had medicinal value, especially A. tatarinowii, deafness, blindness, and digestive disorders were among the conditions commonly treated using these plants. Traditional knowledge of the cultural, ethnomedicinal, and food values of Acorus, based on our recent literature surveys and field investigations in China is presented here. A better understanding of Acorus is vital for conserving the plants and the traditional knowledge associated with them.
Źródło:
Acta Societatis Botanicorum Poloniae; 2018, 87, 2
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Process Optimization and Characterization of an HMX/Viton Nanocomposite
Autorzy:
Shi, X.
Wang, C.
Wang, J.
Li, X.
An, C.
Ji, W.
Powiązania:
https://bibliotekanauki.pl/articles/358667.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
HMX
spray drying
processing parameters
optimization
impact sensitivity
nanoparticles
Opis:
HMX/Viton A nanocomposites were prepared by a spray drying process using different processing parameters, which included the dry gas inlet temperature, the air flow rate, and the solution feed flow rate. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were used to characterize the nanocomposites. The effects of the processing parameters on the morphology of the samples were investigated and are discussed. The thermal decomposition behaviour and impact sensitivity of the raw HMX and HMX/Viton A nanocomposites were also measured and compared. Optimal morphology and dispersion of the coated samples was achieved when the dry gas inlet temperature and the air and solution feed flow rates were 55 °C, 660 L/h and 1.5 mL/min, respectively. Under these optimal processing conditions, the nanocomposites were spherical in shape, ranged from 0.2-2 μm in size, and were composed of many tiny particles of 50-100 nm in size. The crystal phase of the nanocomposites was the same as that of raw HMX. Compared with those of raw HMX, the melting point and impact sensitivity of the nanocomposites were lower and the thermal decomposition rate was slightly higher.
Źródło:
Central European Journal of Energetic Materials; 2015, 12, 3; 487-495
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Chemical Footprint of the Wet Processing of Cotton Fabric
Ślad chemiczny mokrej obróbki tkanin bawełnianych
Autorzy:
Qian, Weiran
Qiu, Xiaoxiao
Guo, Yiqi
Ji, Xiang
Li, Yi
Wang, Laili
Powiązania:
https://bibliotekanauki.pl/articles/1857664.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
chemical footprint
USEtox
human toxicity
ecotoxicity
grey target decision-making model
ślad chemiczny
toksyczność
ekotoksyczność
model podejmowania decyzji
Opis:
The chemical footprint (ChF) can identify the harmful effects of discharged chemical pollutants, helping producers to select environmentally friendly chemicals to reduce their negative environmental impact. This paper quantified and evaluated the ChF of the wet processing of cotton fabric with data collected from a dyeing enterprise. The results showed that the discharged sodium hydroxide caused the most severe impact in terms of both human toxicity and ecotoxicity due to the extensive usage and its high toxicity. The discharged sodium carbonate and dimethyl silicone oil also had a greater environmental impact. Comprehensive evaluation of human toxicity and ecotoxicity with a multi-objective grey target decision-making model indicated that the pretreatment process had the most significant impact, followed by the finishing process and dyeing process. More attention should be paid to the pretreatment process, such as the selection of environmentally friendly textile chemicals, in order to reduce the native impacts of the wet processing of cotton fabric.
Ślad chemiczny (ChF) może identyfikować szkodliwe skutki emitowanych zanieczyszczeń chemicznych, pomagając producentom wybrać przyjazne dla środowiska środki chemiczne w celu zmniejszenia ich negatywnego wpływu na środowisko. W artykule określono ilościowo i oceniono ChF mokrej obróbki tkaniny bawełnianej na podstawie danych zebranych z przedsiębiorstwa farbiarskiego. Wyniki pokazały, że odprowadzany wodorotlenek sodu miał najpoważniejszy wpływ zarówno pod względem toksyczności dla człowieka, jak i ekotoksyczności, ze względu na szerokie zastosowanie i wysoką toksyczność. Odprowadzany węglan sodu i dimetylosilikonowy olej również miały duży wpływ na środowisko. Kompleksowa ocena toksyczności dla ludzi i ekotoksyczności z zastosowaniem wielocelowego modelu podejmowania decyzji wykazała, że największy wpływ miał proces obróbki wstępnej, a następnie proces wykańczania i proces barwienia. Wskazane jest zwrócenie większej uwagi na proces obróbki wstępnej, w szczególności na wybór przyjaznych dla środowiska chemikaliów tekstylnych.
Źródło:
Fibres & Textiles in Eastern Europe; 2021, 4 (148); 100-104
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Coated Ammonium Dinitramide on the Properties of Nitrate-ester Plasticized Polyether Solid Rocket Propellants
Autorzy:
Pang, W. Q.
Li, J. Q.
DeLuca, L. T.
Ke, W.
Fu, X. L.
Zhong, F. X.
Li, H.
Ji, Y. P.
Powiązania:
https://bibliotekanauki.pl/articles/358292.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
energetic materials
NEPE composite solid propellants
ADN
hazardous properties
combustion characteristics
Opis:
Several industrial and research types of nitrate-ester plasticized polyether (NEPE) solid propellants were experimentally analyzed. In general, their compositions differed in the mass fraction of ammonium dinitramide (ADN), which was used as a promising highly energetic filler, as an alternative to ammonium perchlorate (AP). ADN exhibits high performance, low signature and non-polluting characteristics. The propellant composition without ADN, but with AP, was used as the reference. The microstructure and granularity distribution of the uncoated and coated ADN particles were experimentally analyzed. It was found that uncoated ADN particles exhibited irregular shape, while the ADN particles after coating are spherical. Because of their irregular shape, uncoated ADN particles caused inferior processability of the propellant slurry when added to the propellant formulation. Consequently, the NEPE propellants with coated ADN were studied in further detail. The rheological properties, energetic properties, mechanical sensitivities and combustion properties (burning rate and pressure exponent) of the NEPE propellants with coated ADN were studied and compared with the reference NEPE propellant. The addition of ADN particles to the propellant formulations increased the standard theoretical specific impulse and heat of explosion of the propellants, while decreasing the density. The propellants containing ADN particles were much more sensitive to impact and friction compared to the reference sample. Moreover, increasing the ADN mass fraction in the propellant formulation can significantly affect the combustion behaviour and increase the burning rate and pressure exponent compared to of the reference formulation. However it appears that ADN is a very promising candidate as a new energetic material in compositions of NEPE propellants, although several important questions concerning ADN’s suitability, especially in the context of its sensitivity to friction and impact, remain to be answered.
Źródło:
Central European Journal of Energetic Materials; 2018, 15, 4; 590-609
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A dynamic model for the heat transfer behavior of a cooling system
Autorzy:
Liu, Wen
Zhang, Chi
Hu, Xiao-Xiong
Cao, Jian-Bo
Liu, Li-Jiao
Ye, Xin-Y
Lin, Li
Qi, Xun-Ji
Powiązania:
https://bibliotekanauki.pl/articles/2050060.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Instytut Badań Systemowych PAN
Tematy:
adsorption system
refrigerating system
desorption
simulation
Opis:
For purposes of studying the heat transfer behavior of various fluids in a refrigeration system, a dynamic model is established, obtained on the basis of analysis concerning the effects of adsorption velocity, adsorbent bed temperature, condensing temperature, and heat transfer fluids, as well as changes of external conditions. It is demonstrated that adsorption velocity increases sharply in the initial phase of adsorption process and gradually declines after reaching a peak value, whereas condensing temperature increases sharply in the initial phase of desorption process and decreases after reaching a peak value with the desorption quantity decreasing. Furthermore, the increase of heat source temperature and the decrease of cooling water temperature can advance the adsorption process. The present study therefore suggests some ways of improving the performance of such a refrigeration system by increasing heat source temperature, decreasing ambient air temperature, increasing return air temperature and decreasing cooling water temperature.
Źródło:
Control and Cybernetics; 2020, 49, 3; 315--332
0324-8569
Pojawia się w:
Control and Cybernetics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of a nonlinear tuned mass damper by using the multi-scale method
Autorzy:
Liu, Junfeng
Yao, Ji
Huang, Kun
Zhang, Qing
Ze, Li
Powiązania:
https://bibliotekanauki.pl/articles/2104766.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
nonlinear characteristics
complex average method
multi-scale method
nonlinear design
control performance
Opis:
A tuned mass damper is a kind of vibration damping device which has been widely used in tall buildings, machinery, bridges, aerospace engineering and other fields. In practical engineering applications, due to large deformation caused by large displacement, errors in engineering constructions and the existence of limit devices, the structure and tuned mass dampers inevitably produce some nonlinear characteristics, but these nonlinearities are often ignored. The results of this study confirm that the nonlinearity of the structure and the mass damper should be considered in the process of optimal frequency design, otherwise there will be a large deviation between the design optimal frequency of the mass damper and the actual optimal frequency. In this paper, nonlinear characteristics of the tuned mass damper and the main structure are considered. The first-order differential equations are obtained by using the complex average method, and the nonlinear equations of the tuned mass damper system are derived by using the multi-scale method. On this basis, the parameters are determined. The numerical results show that the error of the approximate solution method is small in the given example. The nonlinear tuned mass damper with nonlinear design exhibits a better control performance.
Źródło:
Journal of Theoretical and Applied Mechanics; 2022, 60, 3; 463--477
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
High-security image encryption by multiplexing phase encoding in domains of dual optical transforms
Autorzy:
Li, Zhihui
Gao, Bin
Pan, Xiaoou
Li, Linlin
Wang, Chenxuan
Zuo, Weizhuo
Ji, Yu
Liu, Shutian
Liu, Zhengjun
Powiązania:
https://bibliotekanauki.pl/articles/27310099.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
extended fractional Fourier transform
geometric operations
random phase encoding
Opis:
A novel optical image encryption is proposed based on multiplexing of the random phase encoding with shift and rotation operations in domains of two transforms, extended fractional Fourier transform (eFrFT) and Fresnel transform. The original image is subjected to eFrFT with the action of the random phase mask. The mask is shifted and rotated to enhance the security of this encryption method. The image obtained from eFrFT is entered into Fresnel diffraction by the use of the phase mask to obtain the final encrypted image. We plan for the phase keys to be multiplexed in order to decrease the amount of keys that need to be stored in an application. Here, the displacement, rotation angle, and wavelength in this system can be used as additional keys to improve the security and reliability of the encryption system. Numerical experiments are conducted to verify the effectiveness and security of the method. The findings demonstrate that the keys are sufficiently sensitive for high security.
Źródło:
Optica Applicata; 2023, 53, 3; 447--466
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on Dynamic Recrystallization Models of 21-4N Heat Resistant Steel
Autorzy:
Li, Yiming
Huang, Xiaomin
Ji, Hongchao
Li, Yaogang
Wang, Baoyu
Tang, Xuefeng
Powiązania:
https://bibliotekanauki.pl/articles/2049422.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
21-4N
hot deformation
dynamic recrystallization
critical strain
volume fraction
Opis:
The high-temperature deformation process and dynamic recrystallization (DRX) process of 21-4N were investigated under the conditions of the deformation temperature range of 1273~1453K, the strain rate range of 0.01~10s-1 and the deformation degree of 60% (the total deformation is 0.916) by using Gleeble-1500D thermal simulated test machine. The curves of stress-strain (σ – ε) were obtained, and the curves of work hardening rate (θ) and strain (ε) were obtained by taking derivative of σ – ε. The DRX critical strains under different conditions were determined by the curves of work hardening rate (θ – ε), and the DRX critical strain model was established. The peak strains of 21-4N were obtained by the curves of σ – ε, the relationship between peak stress (σp) and critical strain (εc) was determined, and the peak strain model was established. The DRX volume fraction models of 21-4N were established by using Avrami equation. The DRX grain size of 21-4N was calculated by Image Pro Plus 6.0, and its DRX grain size models were established.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 1; 145-152
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies