Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Lasota, B" wg kryterium: Autor


Tytuł:
Jakość prewencji a koszty wypadków przy pracy
Quality of prevention and costs of accidents at work
Autorzy:
Wolnica, S.
Szczucka-Lasota, B.
Wolniak, R.
Powiązania:
https://bibliotekanauki.pl/articles/321001.pdf
Data publikacji:
2018
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
jakość prewencji
koszty wypadków
quality of prevention
costs of accidents
Opis:
Publikowane dane statystyczne wskazują jednoznacznie, że pomimo, iż liczba wypadków przy pracy w ostatnich latach spadła, to nadal główną ich przyczyną jest zbyt niski nacisk firm na jakość prewencji w tym szkoleń wpływających na stan wiedzy pracowników. Nie wszystkie koszty wypadków da się określić i oszacować. Jak przeliczyć straty moralne? Artykuł wskazuje wpływ jakości prewencji na ewentualne koszty wypadków przy pracy, sposoby badania kosztów a także pokazuje kto ponosi wyżej wymienione koszty.
Published statistical data clearly indicate that despite the fact that the number of accidents at work has decreased in recent years, their main cause is the insufficient pressure of companies on the quality of prevention, including training affecting the knowledge of employees. Not all accident costs can be determined and estimated. How do you convert moral losses? The article shows the impact of the quality of prevention on possible costs of accidents at work, ways of examining costs and shows who bears the above-mentioned costs.
Źródło:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska; 2018, 131; 583-594
1641-3466
Pojawia się w:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Additional training of drives
Dokształcanie kierowców
Autorzy:
Węgrzyn, T.
Szczucka-Lasota, B.
Kamińska, J.
Powiązania:
https://bibliotekanauki.pl/articles/374837.pdf
Data publikacji:
2011
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
młodzi kierowcy
szkolenie
początki ruchu
young drivers
training course
traffic accidence
Opis:
W artykule przedstawiono analizę wyników ankiety przeprowadzonej wśród młodych studentów kierowców. Respondenci mieli prawa jazdy nie dłużej niż 3 lata. Wyniki potwierdzają, że wprowadzenie dodatkowych praktycznych kursów dla młodych kierowców jest potrzebne do dalszego doskonalenia.
The results of questionnaire between young student drivers are presented. The responders having drivers license no more than 3 years. The results suggested, that the participation in the practical training, for young drivers could be very important for more experience.
Źródło:
Transport Problems; 2011, 6, 2; 89-92
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zagrożenia przy pracach spawalniczych na urządzeniach ciśnieniowych
The hazards of welding on a pressure equipment
Autorzy:
Węgrzyn, T.
Szczucka-Lasota, B.
Wieczorek, A.
Powiązania:
https://bibliotekanauki.pl/articles/370707.pdf
Data publikacji:
2011
Wydawca:
Wyższa Szkoła Zarządzania Ochroną Pracy w Katowicach
Tematy:
zagrożenia
spawanie
ciśnienie
hazards
pressure
Opis:
W artykule zostały opisane zagrożenia w środowisku pracy, na które jest narażony spawacz wykonujący spoiny na układach ciśnieniowych urządzeń energetycznych w elektrowni. Analizie zostały poddane zagrożenia jakie mogą wystąpić w czasie usuwania nieszczelności na układzie parowym kotła, jak również podczas usuwania nieszczelności kotłów ciśnieniowych. Zostało również opisane realne zagrożenie spawacza w czasie pracy związanej z naprawą układów kotła, określono ciężkość pracy i narażenia zdrowia podczas tych prac. Scharakteryzowano także stosowane metody i środki ochrony indywidualnej i zbiorowej, które w sposób znaczący pozwalają zminimalizować ryzyko zawodowe w środowisku pracy spawacza.
This article contains information about the occupational hazards of welder during the welding process on a pressure equipment in the power station. There were analyzed the occupational hazards both while fault clearing such as leaks in the steam boiler system and in the pressure boiler itself. It also has been described the real risk of welder while repairing the boiler system, was determined severity of work and the health hazard of welder. Additionally, in this article were characterized the methods and preventive measures both collective and individual, used in order to reduce an occupational risk of welder.
Źródło:
Zeszyty Naukowe Wyższej Szkoły Zarządzania Ochroną Pracy w Katowicach; 2011, 1(7); 158-172
1895-3794
2300-0376
Pojawia się w:
Zeszyty Naukowe Wyższej Szkoły Zarządzania Ochroną Pracy w Katowicach
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nonparametric statistical analysis for multiple comparison of machine learning regression algorithms
Autorzy:
Trawiński, B.
Smętek, M.
Telec, Z.
Lasota, T.
Powiązania:
https://bibliotekanauki.pl/articles/331296.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
maszyna ucząca się
test statystyczny nieparametryczny
regresja statystyczna
sieć neuronowa
wielokrotne testy porównawcze
machine learning
nonparametric statistical tests
statistical regression
neural network
multiple comparison tests
Opis:
In the paper we present some guidelines for the application of nonparametric statistical tests and post-hoc procedures devised to perform multiple comparisons of machine learning algorithms. We emphasize that it is necessary to distinguish between pairwise and multiple comparison tests. We show that the pairwise Wilcoxon test, when employed to multiple comparisons, will lead to overoptimistic conclusions. We carry out intensive normality examination employing ten different tests showing that the output of machine learning algorithms for regression problems does not satisfy normality requirements. We conduct experiments on nonparametric statistical tests and post-hoc procedures designed for multiple 1 x N and N x N comparisons with six different neural regression algorithms over 29 benchmark regression data sets. Our investigation proves the usefulness and strength of multiple comparison statistical procedures to analyse and select machine learning algorithms.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2012, 22, 4; 867-881
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Tribological Properties of Laser Hardened Steel 42CrMo4
Właściwości tribologiczne stali 42CrMo4 hartowanej laserowo
Autorzy:
Tarasiuk, W.
Gordienko, A. I.
Wolocko, A. T.
Piwnik, J.
Szczucka-Lasota, B.
Powiązania:
https://bibliotekanauki.pl/articles/354410.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
laser hardened steel
tribological properties
steel 42CrMo4
abrasive wear
stal hartowana laserowo
właściwości tribologiczne
stal 42CrMo4
zużycie ścierne
Opis:
The paper presents results of research tribological properties laser hardened steel 42CrMo4. Parameter influencing on the quality of the hardened surface was laser head speed. The study was conducted on friction tester pin-on-disc type T-11, and a counter sample disc was silicate. Parameter determining the quality of the surface layer is the intensity of wear. Based on the results we obtain information about the laser head speed to temper steel 42CrMo4 so as to maintain a high resistance to wear.
W pracy przedstawiono wyniki badań właściwości tribologicznych stali 42CrMo4 poddanej hartowaniu laserowemu. Parametrem wpływającym na jakość hartowanej powierzchni była prędkości głowicy lasera. Badania tarciowe przeprowadzono na testerze typu trzpień-tarcza T-11, a przeciwpróbkę stanowiła tarcza silikatowa. Parametrem wyznaczającym jakość uzyskanej warstwy była intensywność zużycia. Na podstawie wyników badań uzyskujemy informację, z jaką prędkością głowicy możemy hartować stal 42CrMo4 tak aby zachować wysoką odporność na zużycie ścierne.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 4; 2939-2944
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aspekty prawne i środowiskowe linii demontażu samochodów
Legal and environmental aspects of disassembly of cars production lines
Autorzy:
Szczucka-Lasota, B.
Hernas, A.
Powiązania:
https://bibliotekanauki.pl/articles/270380.pdf
Data publikacji:
2011
Wydawca:
Centralny Ośrodek Badawczo-Rozwojowy Aparatury Badawczej i Dydaktycznej, COBRABiD
Tematy:
demontaż samochodów
przepisy prawne
środowiskowe uwarunkowania eksploatacji
disassembly of cars
legal regulations
environmental protection
Opis:
Artykuł przedstawia aspekty prawne i środowiskowe demontażu pojazdów wycofanych z eksploatacji. Ogranicza się do zaprezentowania celowości inwestycji, oraz opisu wybranych rozwiązań technologicznych i organizacyjnych mających wpływ na zredukowanie lub wyeliminowanie negatywnego wpływu prezentowanych technologii na otaczające środowisko.
The article explains legal and environmental aspects of disassembly of cars withdrawn from the usage. The article is limited to present usefulness of investments and to describe selected technological and organisational solutions having impact on reduction or elimination of negative impact of presented technologies on the surrounding environment.
Źródło:
Aparatura Badawcza i Dydaktyczna; 2011, 16, 3; 27-36
2392-1765
Pojawia się w:
Aparatura Badawcza i Dydaktyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of the internal transport process by positioning selected quality tools on the example of soldering process
Autorzy:
Szczucka-Lasota, B.
Wolniak, R.
Węgrzyn, T.
Powiązania:
https://bibliotekanauki.pl/articles/322442.pdf
Data publikacji:
2018
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
transport
FMEA analysis
quality of transport process
logistic
analiza FMEA
jakość procesu transportowego
logistyka
Opis:
In the article we assessed the in-plant transport on the soldering line. The assessment was based on three-month process observation, registration of non-conformities and a modified PFMEA analysis form. Among the 9 non-compliance groups, the so-called critical inconsistencies for which the reasons for their generation have been determined. Actions have been developed to eliminate the causes of non-compliance, aimed at improving the process and devices of in-house transport. The proposed solutions are implemented in the analyzed organization.
Źródło:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska; 2018, 119; 275-288
1641-3466
Pojawia się w:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
City logistics: influence of oversized road transport on urban development
Autorzy:
Szczucka-Lasota, B.
Powiązania:
https://bibliotekanauki.pl/articles/197386.pdf
Data publikacji:
2017
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
city logistics
oversized transport
load distribution
logistyka miejska
transport ponadgabarytowy
rozkład obciążenia
Opis:
This paper describes the influence of road transport on urbanization and the transport of oversized loads. There is an increasing interest in oversized transport and urban development. In this developmental context, it is necessary to transport heavy construction machinery, infrastructure elements, pipes for gas pipelines and waterworks, or even rails to create roads for rail transport. For this purpose, the transport of loads exceeding standard parameters (16.50 m in length, 2.55 m in width, 4.00 m in height and 40 Mg in mass) is used. Oversized traffic has many obstacles on the roads, such as low bridges and viaducts, narrow roads, poor technical condition of roads, road works and low-permeability roundabouts.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2017, 97; 157-165
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Filler materials for MAG welding with microjet cooling for truck frame repairs
Autorzy:
Szczucka-Lasota, B.
Węgrzyn, T.
Powiązania:
https://bibliotekanauki.pl/articles/197396.pdf
Data publikacji:
2018
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
MAG welding
cooling system
welded construction
truck
transport
spawanie MAG
system chłodzenia
konstrukcja spawana
samochód ciężarowy
Opis:
The goal of this paper is to analyse the mechanical properties of the weld steel structure of car body truck frames following MAG welding repairs using various filler materials. The main role of welding conditions is connected with filler materials, welding technology, stress state and temperature. In the paper, the properties of steel structures after MAG welding with microjet cooling are presented. Weld metal deposits (WMDs) were prepared by using various welding wires with different chemical compositions. A WMD with various nickel content was examined using three different welding wires; simultaneously, a WMD with varied oxygen content was examined using different gas mixtures for microjet cooling. In this study, the metallographic structure and impact toughness of welded joints were analysed in terms of welding parameters. The amount of acicular ferrite (AF) in WMDs, with various amounts of nickel and oxygen after welding, was tested. The various steel deposits were checked with the variable content of manganese and silicon, as well as nickel. Gas mixtures of argon and carbon dioxide were used for microjet cooling.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2018, 101; 215-226
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Innovation in the process of thermal spraying coatings
Autorzy:
Szczucka-Lasota, B.
Powiązania:
https://bibliotekanauki.pl/articles/353980.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
control structure of the coating
local and selective cooling
hybrid method
Opis:
In this paper, the hybrid method connects the ultrasonic spraying method with a injector of complex cooling micro-jet system is presented. The use of properly constructed injector allows for local and selective cooling of the coating structure immediately after spraying process. The construction of injector is the subject of patent in Polen. The presented new technology gives practical possibility of control of coatings structure. This is the kind of positive feedback between the technology process and obtained product (the quality of the process increases the quality of the final product). The initial experimental investigations, presented in this paper, show, that the obtained coatings structure is: fine-dispersion of the grain, with a lower porosity, good compactness and adhesion to the substrate.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 3; 1431-1436
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Logistics in the management of municipal waste
Autorzy:
Szczucka-Lasota, B.
Wolniak, R.
Węgrzyn, T.
Powiązania:
https://bibliotekanauki.pl/articles/323593.pdf
Data publikacji:
2018
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
logistics
waste management chain
waste management
municipal waste
logistics processes
recycling
logistyka
łańcuch zarządzania odpadami
gospodarka odpadami
odpady komunalne
procesy logistyczne
recykling
Opis:
The article describes the system of municipal waste management. The logistic processes, collection and disposal of waste have been also presented. Municipal waste was tested on three export routes. Particular attention was paid to the problems encountered in the first link of the municipal waste management logistics chain.
Źródło:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska; 2018, 116; 109-119
1641-3466
Pojawia się w:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Logistyka związana z transportem ponadgabarytowych elementów wiatraków prądotwórczych
Transport logistics of the oversized wind turbine elements
Autorzy:
Szczucka-Lasota, B.
Kamińska, J. A.
Krzyżewska, I.
Powiązania:
https://bibliotekanauki.pl/articles/315155.pdf
Data publikacji:
2017
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
ładunek ponadgabarytowy
transport samochodowy
wiatraki prądotwórcze
regulacje prawne
spedycja
logistyka transportu
oversize loads
car transport
wind turbine
legal regulations
spedition
transport logistics
Opis:
W artykule omówione zostało zagadnienie transportu elementów konstrukcyjnych wiatraków prądotwórczych jako elementów ponadgabarytowych. Przedstawiono procedurę zabezpieczania przewożonych elementów oraz regulacje prawne dotyczące samego przewozu w zakresie planowania trasy oraz jej realizacji.
The article discusses the problem of transport of construction elements of the wind generators as oversized elements. The procedure for securing the transported elements and the legal regulations concerning the carriage itself in terms of route planning and its implementation were presented.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2017, 18, 12; 1625-1629, CD
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Low alloy steel shaft surface regenerative welding with micro-jet cooling
Autorzy:
Szczucka-Lasota, B.
Węgrzyn, T.
Lukaszkowicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/196216.pdf
Data publikacji:
2019
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
welding
micro-jet cooling
metallographic structure
wearing
spawanie
chłodzenie mikrostrumieniowe
struktura metalograficzna
zużycie
Opis:
In this paper, the effect of surface preparation after innovating welding technology with micro-jet cooling was reported. Substantial information about parameters of steel machine elements surfacing with the micro-jet cooling process was given. Recorded evidence concerning the influence of various micro-jet parameters on the metallographic structure of the machine shaft after surface welding was taken. There were tested metallographic and tribology properties of welds. The tribology interactions of a solid shaft surfaces were examined after surface welding.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2019, 102; 205-215
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New Technological Concept for Thermal Spray Protective Coatings
Autorzy:
Szczucka-Lasota, B.
Piwnik, J.
Powiązania:
https://bibliotekanauki.pl/articles/353107.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cooling system
micro-injector
technological concept
Opis:
Thermally spraying with micro-jet cooling is an innovate technology. It is possible to get fine dispersive structure of coatings during the shorter time in comparable to the classical high velocity oxygen fuel process (HVOF). It corresponds with good corrosion-erosion properties of structure. In the paper the parameters of the spraying with micro-jet cooling process are presented. The selected properties of coatings obtained by hybrid method are presented. The results of wear tests for hybrid and HVOF coating are compared. Results of investigation are very optimistic. The presented technology should be adapted to the actual production of protective coating for machines and construction working in wear conditions.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 3; 1499-1504
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena jakości złączy spawanych wentylatorów transportu pneumatycznego
Assessment of quality of connectors for welded pneumatic transport fans
Autorzy:
Szczucka-Lasota, B.
Wolniak, R.
Węgrzyn, T.
Cieślik, M.
Powiązania:
https://bibliotekanauki.pl/articles/323159.pdf
Data publikacji:
2018
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
jakość
jakość produktu
jakość złączy spawanych
jakość w procesach produkcyjnych
quality
product quality
quality of welded joints
quality in production processes
Opis:
Jakość złączy spawanych konstrukcji jest jednym z elementów determinujących ich przydatność do dalszej bezpiecznej eksploatacji. Połączenie wykonane niezgodnie z wymaganiami może być przyczyną poważnej awarii a nawet katastrofy. Na podstawie norm PN-EN ISO 5817:2014-05 oraz PN-EN ISO 23278:2015-05 można określić poziom jakości produkcji połączeń spawanych. Nie należy mylić go z poziomem określania przydatności eksploatacyjnej danego wyrobu, chociaż norma PN-EN ISO 23278:2015-05 może być stosowana na potrzeby kontroli podczas eksploatacji. Przydatność eksploatacyjna konstrukcji spawanych zależy bowiem, od wielu czynników. Za przydatność do dalszej eksploatacji odpowiada najsłabsze ogniwo w analizowanej konstrukcji (może to być połączenie spawane ale także stopień degradacji materiału konstrukcyjnego itd.). W przytoczonych normach podano poziomy jakości na podstawie niezgodności spawalniczych w złączach spawanych (z wyjątkiem spawania wiązką) dla wszystkich rodzajów stali. Poziomy jakości obejmują spoiny czołowe i spoiny pachwinowe. Podano trzy stopnie jakości umożliwiające stosowanie dla szerokiego zakresu produkcji spawalniczej. Oznaczono je symbolami B, C i D. W przypadku wirników wentylatorów pneumatycznych, służących do transportu cząstek stałych, wymagany jest najwyższy poziom jakości. Poziom ten oznaczono symbolem B. Stanowi on jedno z kryteriów dopuszczenia złącza do zastosowań w warunkach eksploatacji spawanego urządzenia. Poziom B jakości można uznać za wystarczający, pod warunkiem, że badana konstrukcja nie jest przeznaczona do zastosowań w ekstremalnych warunkach pracy lub warunkach podwyższonego ryzyka. W takich przypadkach kryteria odbioru mogą być zaostrzone. Poziom B dopuszcza niewielkie niezgodności w postaci pęcherzy, wklęsłego lica itp. W normach określono warunki (cechy geometryczne i ilościowe) wad materiałowych, które mogą znaleźć się w spoinach oraz ich wartości graniczne, które determinują klasę jakości produkcji danej spoiny. W zależności od warunków odbioru, stanowią one jedno z kryteriów oceny spoiny do danych zastosowań. W artykule oceniono jakość produkcyjną wszystkich złączy spawanych wirnika wentylatora pneumatycznego, pracującego w kopalni. Wykonane badania kontrolne miały na celu stwierdzenie poprawności wykonania złączy oraz określenie, które z połączeń nie spełnia kryteriów odbioru. Połączenia, które nie zostały zaklasyfikowane do poziomu jakości B zostały wymienione.
The quality of welded joints of the structure is one of the elements determining their suitability for further safe operation. A combination conecting inconsistently with the requirements may cause a serious failure or even a catastrophe. On the basis of PN-EN ISO 5817: 2014-05 and PN-EN ISO 23278: 2015-05 standards, the quality level of welded joints production can be determined. It should not be confused with the level of determining the operational suitability of a given product, although the PN-EN ISO 23278: 2015-05 standard may be used for the purposes of control during operation. The usefulness of the welded structures depends on many factors. The weakest link in the analyzed structure (the welded joint but also the degree of degradation of the construction material, etc.) is responsible for the suitability for further use. The quality standards given in the quoted standards are based on weld incompatibilities in welded joints (except for beam welding) for all types of steel. Quality levels include butt welds and fillet welds. Three grades of quality are given to enable the use in a wide range of welding production. They have been marked with the symbols B, C and D. In the case of rotors of pneumatic fans, used for the transport of solid particles, the highest level of quality is required. This level is marked with the symbol B. It is one of the criteria for allowing the connector to be used in the operating conditions of the welded device. The quality level B may be considered sufficient, provided that the tested construction is not intended for use in extreme operating conditions or in high-risk conditions. In such cases, the acceptance criteria may be tightened. Level B allows for slight discrepancies in the form of blisters, concave faces, etc. The standards define the conditions (geometrical and quantitative features) of material defects that may be in the joints and their limit values, which determine the quality class of the given weld. Depending on the reception conditions, they are one of the criteria for assessing the weld for specific applications. The article assessed the production quality of all welded joints of a pneumatic fan rotor operating in a mine. The control tests carried out were aimed at confirming the correctness of the execution of joints and determining which connection did not meet the acceptance criteria. Connections that were not classified to the quality level B have been listed.
Źródło:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska; 2018, 131; 511-521
1641-3466
Pojawia się w:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies