Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kyzioł, Lesław." wg kryterium: Autor


Wyświetlanie 1-34 z 34
Tytuł:
Composite materials for warship constructions
Autorzy:
Kyzioł, Lesław
Powiązania:
https://bibliotekanauki.pl/articles/245851.pdf
Data publikacji:
2019
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
polyester-glass composites
recyclate
modified wood
non-magnetic warships isotropic
Opis:
The article presents the basic properties of composite materials used for the construction of special ships. Static and dynamic characteristics of materials such as wood and polyester-glass composites are presented. Noteworthy are materials such as surface modified wood and polyester-glass composites with the addition of recyclate. Composite materials are widely used materials for the construction of non-magnetic warships. The article describes the properties of surface modified wood with polymethyl methacrylate and a polyester-glass composite with the addition of recyclate. The recyclate is fragmented, milled polyester-glass scrap. The content of the recyclate greatly affects the mechanical properties of the composite. The properties of the composite with the addition of recyclate depend on the recyclate content as well as the production technology and size of the recycled granulates. The test results showed that the increase in the recycled content causes a decrease in the mechanical properties of the composite. However, it should be remembered that these materials originated from waste, waste that is not subject to self-degradation, which have a very negative impact on the natural environment. At present, where there is a very large pollution of the natural environment, the processing and management of huge amounts of composite waste is an essential goal. A significant amount of recyclate significantly reduces the mechanical properties of the composite; however, the same large amount of recycled material has been transformed and used. The manufactured material and its structural elements are still non-magnetic structures and can be used on a less loaded element. The choice of material for the construction of special ships elements is determined not only by its properties but also by knowledge, experience, method of processing, economic and technical risk.
Źródło:
Journal of KONES; 2019, 26, 4; 135-140
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wytrzymałość drewna modyfikowanego w złożonych stanach naprężeń. Cz. 1, Badania doświadczalne
Autorzy:
Kyzioł, Lesław.
Powiązania:
Zeszyty Naukowe / Akademia Marynarki Wojennej im. Bohaterów Westerplatte 2008, nr 3 (174), s. 43-57
Data publikacji:
2008
Tematy:
Drewno badanie
Metody badawcze
Naprężenia i odkształcenia
Wytrzymałość materiałów
Opis:
Rys., tab.
Bibliogr. - Abstr., streszcz.
Dostawca treści:
Bibliografia CBW
Artykuł
Tytuł:
Stanowisko do badania wytrzymałości zmęczeniowej materiałów konstrukcyjnych w warunkach działania cieczy korodującej dla złożonego stanu naprężeń
Stand to test fatigue strength of construction materials with regard to complex stress states exposed to corrosion - producing liquid
Autorzy:
Garbacz, Grzegorz.
Kyzioł, Lesław.
Powiązania:
Zeszyty Naukowe / Akademia Marynarki Wojennej im. Bohaterów Westerplatte 2012, nr 2(189), s. 45-54
Data publikacji:
2012
Tematy:
Metody badawcze
Maszyny wytrzymałościowe
Naprężenia i odkształcenia
Aparatura naukowo-badawcza
Wytrzymałość materiałów
Opis:
Rys., tab.
Bibliogr.
Dostawca treści:
Bibliografia CBW
Artykuł
Tytuł:
Modelowanie i weryfikacja doświadczalna przebijalności tarczy pociskami
Autorzy:
Kyzioł, Lesław.
Świątek, Krzysztof.
Powiązania:
Zeszyty Naukowe / Akademia Marynarki Wojennej im. Bohaterów Westerplatte 2009, nr 2 (177), s. 71-90
Współwytwórcy:
Bugłacki, Henryk (1947- ). Recenzja
Data publikacji:
2009
Tematy:
Wytrzymalość materiałów badanie
Tarcze wytrzymałość
Okręty ochrona i obrona
Balistyka zewnętrzna
Balistyka wewnętrzna
Badania naukowe w wojsku
Opis:
Rys., tab.
Abstr., streszcz.
Bibliogr.
Dostawca treści:
Bibliografia CBW
Artykuł
Tytuł:
Analysis of the cracking process of layered composites with polyester-glass recyclate using dynamic tests
Autorzy:
Panasiuk, Katarzyna
Kyzioł, Lesław
Hajdukiewicz, Grzegorz
Powiązania:
https://bibliotekanauki.pl/articles/135362.pdf
Data publikacji:
2019
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
polyester-glass recyclate
composites
dynamic tests
toughness
cracking process
defects
Opis:
Layered composites are materials that are widely used in industry due to their low manufacturing costs. They are used, among others, as a construction material for the construction of light aircraft, cars, wind turbine blades and the hulls of vessels. The universality of their use has contributed to the formation of a large amount of post-production and post-use waste from these composites. Layered composites, using recycled polyester and glass, or recycled composite waste, may be materials that could be used in the economy. The polyester-glass waste used in the composite was created by crushing and then grinding and sieving to obtain the appropriate granulation. Materials with a waste content of 0%, 10%, 20% and with granulation of this waste of ≤ 1.2 mm were made using the hand lamination method. Test specimens were prepared from the material plates that were obtained in accordance with the PN-EN ISO 179-1: 2010E standard (Plastics – Charpy Impact Assessment – Part 1: Non-instrumental impact test). Impact tests of samples were carried out according to the above-mentioned standards using a Zwick Roell RKP450 swinging hammer. Test bench instrumentation and software enabled the bending forces to be recorded, as well as the deflection of the samples for short time intervals and displacement, so a detailed force-deflection graph could be obtained. During the analysis, the results of the research were focused on describing the kinetics of the process where the samples were destroyed (fracture mechanics), this allowed for the initial determination of the material’s resistance to dynamic loads. The results obtained showed that the increase of the recycled content in the produced composite contributed to the lowering of the destructive force threshold in the impact tests, as well as the simultaneous increase of the plasticity of the material. The increase of the sample’s deflection with the occurrence of the maximum force resulted in the energy of the elastic state being increased (Ue).
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2019, 57 (129); 73-78
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of the recyclate on a deflection of composites in bending
Autorzy:
Panasiuk, Katarzyna
Kyzioł, Lesław
Hajdukiewicz, Grzegorz
Powiązania:
https://bibliotekanauki.pl/articles/242849.pdf
Data publikacji:
2019
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
recycling
three-point bending
composites
new materials
force-strain curves
Opis:
The aim of the research was to determine the effect of polyester-glass recyclate on the deflection of composite samples subjected to three-point bending. The polyester-glass recyclate was obtained from the part of the ship’s hull made of polyester-glass composite, constituting scrap metal. The pieces of scrap were pre-fragmented and then processed into a prepared stand for this purpose. Such a fragmented recycling will be used to make composites with different scrap / recycled content. For this purpose, research materials were made using the vacuum bag method with the percentage of 0%, 10% and 20% recyclate) as well as various granulation (i.e. 1.2 mm and 3.0 mm). The research material consisted of rectangular plates with a thickness corresponding to the thickness of the samples. The samples for testing were made by water cutting. The tests were carried out on a suitably prepared stand, which was made of a universal Zwick Roell testing machine and three-point bending handles and a dial indicator. The spacing of the supports has been determined in accordance with the binding standard for three-point bending. Obtained results from tests, i.e. strain, stress, deflection, deformation allowed analysing the impact of recyclate on bending strength and defining the deflection arrow. Based on the results obtained from three-point bending, it can be concluded that the polyester-glass recycling has an influence on the decrease of strength, stress and deflections of the tested composites.
Źródło:
Journal of KONES; 2019, 26, 4; 197-203
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of polyester-glass recyclate on the hardness and structure of composites
Autorzy:
Panasiuk, Katarzyna
Kyzioł, Lesław
Abramczyk, Norbert
Hajdukiewicz, Grzegorz
Powiązania:
https://bibliotekanauki.pl/articles/135086.pdf
Data publikacji:
2019
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
polyester-glass
recycling
composites
hand-laminating
hardness
structures
Opis:
The attractive characteristics of polyester-glass composites have led to their use in many industries, but using them as structural elements requires knowing their mechanical properties. This paper presents processing methods of polyester and glass scrap and their use in the production of new composites. This scrap, called the recyclate, was pre-crushed, ground, and then passed through sieves to obtain the desired fractions. Composite materials with added recyclate were made by hand lamination. Composites were made and then used to conduct appropriate tests to determine the degree of cure of the resin, and to determine the effect of the polyester-glass recyclate content on the hardness of composites. For this purpose, rectangular panels with a thickness of g = 8 mm were produced by manual lamination. Each plate contained 0% glass mat, 10% resin, and 20% recyclate with granulation ≤ 1.2 mm and ≤ 3 mm. Then, test samples were formed from each plate. Hardness measurements were performed using the ball-pressing method. In addition, structural studies were carried out to determine the correlation between the structural and mechanical properties of the discussed materials. The obtained test results showed that the recyclate content and its granulation clearly affected the mechanical properties of the tested composite materials.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2019, 59 (131); 22-26
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Polska ćwiczebna amunicja strzelecka (OR) - konstrukcja i wyniki badań
Autorzy:
Furmanek, Wojciech.
Gacek, Józef (1945- ).
Woźniak, Ryszard (1957- ).
Powiązania:
Zeszyty Naukowe / Akademia Marynarki Wojennej im. Bohaterów Westerplatte 2009, nr 4 (179), s. 7-18
Współwytwórcy:
Kyzioł, Lesław. Recenzja
Data publikacji:
2009
Tematy:
Balistyka zewnętrzna
Amunicja ćwiczebna badanie
Strzelanie
Szkolenie zawodowe
Opis:
Amunicja będzie wykorzystywana w procesie szkolenia żołnierzy wszystkich rodzajów sił zbrojnych, w tym marynarki wojennej.
Bibliogr.
Dostawca treści:
Bibliografia CBW
Artykuł
    Wyświetlanie 1-34 z 34

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies