Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kursun, Ilgin" wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Surface chemistry and flotation properties of galena and pyrite particles in the presence of xanthate- monothiophosphate- thiocarbamate collectors
Autorzy:
Ercelik, Gokhan
Terzi, Mert
Kursun, Ilgin
Ozdemir, Orhan
Powiązania:
https://bibliotekanauki.pl/articles/24148622.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
pyrite
galena
zeta potential
bubble-particle attachment time
micro-flotation
Opis:
In this study, surface chemistry and flotation properties of the gold-bearing galena and pyrite minerals of Menderes region, Izmir, Turkey were investigated with the use of xanthate-thiocarbamate-monothiophosphate collectors. In this context, the micro-flotation experiments, the zeta potential, and bubble-particle attachment time measurements were conducted in the presence of Thiophosphate (Aero S-8045), Xanthate (SIBX), and Thiocarbamate (Aero float MX-505) collectors. In the case of micro-flotation experiments, the MX-505 exhibited higher flotation efficiency for both minerals compared to SIBX and S-8045 collectors. In the micro-flotation tests conducted on galena and pyrite, while the flotation recovery of 99.82% and 81.96% were obtained with MX-505, the flotation recovery of 89.64% and 62.50% were reached in the case of using SIBX. Furthermore, the S-8045 resulted in the flotation recovery s of 75.09% and 25.45% for galena and pyrite, respectively. In the case of zeta potential experiments as a function of pH, the galena mineral showed a negative charge between -17.22 to -41.42 mV at pH 5 – 11, no point of zero charge (pzc) was determined, and the pzc of pyrite was determined as pH≈8. The bubble-particle attachment time experiments performed in the presence of S-8045, SIBX, and MX-505 collectors indicated that the attachment efficiency was 100% in the presence of MX-505 at 12.5-75 g/Mg dosages and 1-1000 ms contact times. These results revealed that there was an extraordinarily strong interaction between the galena/pyrite and the air bubbles in the presence of MX-505. The results obtained within this study indicated that galena and pyrite minerals showed inherently less than 25% natural floatability which can only be enhanced under specific conditions. The results obtained within this study indicated that galena and pyrite minerals showed inherently low natural floatability which can only be enhanced under specific conditions. In the tests conducted on these minerals, galena mineral showed higher than %20 natural floatability compared to pyrite mineral, and collectors produced from thiocarbamates have shown greater effectiveness compared to xanthate and thiophosphate.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 5; art. no. 167947
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Digital image processing (DIP) application on the evaluation of ironrich heavy mineral concentrates produced from river sand using a sequential mineral processing approach
Autorzy:
Terzi, Mert
Kursun, Ilgin
Cinar, Mustafa
Ozdemir, Orhan
Powiązania:
https://bibliotekanauki.pl/articles/1447186.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gravity separation
magnetic separation
flotation
silica
iron
magnetitte
Opis:
In this study, the iron-rich heavy mineral concentrate production from river sand as a byproduct of an alternative resource by gravity, magnetic separation, and flotation methods were investigated in detail. For the physical separation of the sample and increasing the Fe2O3 content, a shaking table and a wet high-intensity magnetic separator were used, respectively. The gravity and magnetic separation experiments included rougher, cleaner, and scavenger circuits. In the flotation experiments, cationic flotation with ethylenediamine under acidic conditions, and anionic flotation with sodium oleate under alkaline conditions were performed. The iron and silica content of the products obtained were determined by digital image processing (DIP) methods and compared with the classical analytical procedures. Finally, a flow chart was proposed for the processing of the ore according to the optimum enrichment parameters were determined from the experiments. The results obtained in this study show that it is possible to produce an iron-rich heavy mineral concentrate with Fe2O3 grade and recovery rate of 79.13% and 57.81%, respectively, in addition to a potential feed for the production of quartz sand and feldspar concentrates.
Źródło:
Physicochemical Problems of Mineral Processing; 2021, 57, 3; 21-35
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of flocculation properties and floc structure of coal processing plant tailings in the presence of monovalent and divalent ions
Autorzy:
Gungoren, Can
Unver, Ilgin Kursun
Ozdemir, Orhan
Powiązania:
https://bibliotekanauki.pl/articles/1845206.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coal tailings
coagulation
flocculation
floc structure
colloidal particles
monovalent
divalent ions
Opis:
Low-rank coals are generally processed with wet methods including washing, flotation, etc. Fine-sized tailings of these processes are discharged to tailing ponds with a significant amount of associated water which contains a high amount of dissolved ions. These tailings should be dewatered employing coagulation/flocculation in terms of technological and environmental aspects. In this study, the coagulation/flocculation behavior of coal processing plant tailings obtained from Manisa, Turkey was investigated in the presence of monovalent (Na+, K+) and divalent (Mg2+, Ca2+) ions and an anionic flocculant (SPP-600). First, the coagulation properties of coal tailings were determined. Then, the flocculation experiments were carried out, and the turbidity values of the suspensions were measured. Moreover, the sizes of the flocs were determined using a laser diffraction particle size analyzer to analyze the strength of the flocs. The results of the coagulation experiments showed that while divalent ions were more effective at 10-1 mol/dm3, higher settling rate and lower turbidity values were obtained in the presence of monovalent ions at 1 mol/dm3 concentration. The optimum flocculant dosage was obtained as 150 g/Mg from the flocculation experiments. The floc size and strength measurements indicated that the larger flocs were obtained with Na+ than Ca2+ in the presence of the flocculant. The strongest flocs were obtained at 10-1 mol/dm3 Ca2+ + 150 g/Mg flocculant. It can be concluded from this study that the coagulation followed by the flocculation method can be employed to obtain fast flocculation behavior and low turbidity for the dewatering of coal tailings.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 5; 747-758
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies