Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Krawczyk, W." wg kryterium: Autor


Tytuł:
Prediction of the dynamic characteristics and control of aircraft in prescribed trajectory flight
Autorzy:
Blajer, W.
Graffstein, J.
Krawczyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/280601.pdf
Data publikacji:
2001
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
inverse dynamics
inverse simulation control
prescribed trajectory flight
Opis:
A unified and general approach to modeling and simulation of aircraft prescribed trajectory flight is presented in the paper. The program of motion is composed of a specified trajectory in space (two constrains on the aircraft position), a required fuselage attitude with respect to the trajectory, and optionally, elevator and rudder deflections and thrust changes, a tangent realization of the trajectory constrains arises, which yields two additional constraints on the fuselage attitude (which thus becomes fully specified). The govering equations of the programmed motion are developed in the form of differential-algebraic equations, and a method of solving the equations is proposed. The solution consist of variations of the aircraft state variables and the required control that ensures realization of the prescribed motion program. This gives a unique opportunity to study simulated control strategies and evaluate feasibility of modeled aircraft mission. Some results of numerical simulations are reported.
Predykcja własności dynamicznych i sterowania samolotem w ruchu programowym po założonej trajektorii. W pracy przedstawione jest uogólnione i zmodyfikowane podejście do modelowania i symulacji programowego ruch samolotu. Program ruchu budowany jest za pomocą założonej trajktorii przestrzennej (dwa warunki więzów nakładane na położenie samolotu), narzuconych zmian konfiguracji płatowca względem tej trajektorii oraz, opcjonalnie, zmian prędkości lotu. W przypadku samolotu sterowanego klasycznie za pomocą wychyleń powierzchni sterowych (lotek oraz sterów wysokości i kierunku) oraz zmiany siły ciągu, realizacja więzów trajektorii lotu jest styczna, co implikuje dwa dodkowe warunki na zmiany konfiguracji płatowca względem trajektorii. W ten sposób zmiany konfiguracji kątowej płatowca stają się w pełni określone (zaprogramowane). Równania ruchu programowego generowane są w postaci równań różniczkowo-algebraicznych. Proponowana jest metoda numerycznego rozwiązania tych równań. Jako rozwiązania są zmiany w czasie zmiennych stanu ruchu samolotu oraz przebiegi sterowania samolotem wymagane dla ścisłej realizacji więzów programowych. Otwiera to nowe możliwości analizy symulowanych manewrówsamolotu oraz oceny ich realizowalności. Przytaczne są wybrane wyniki symulacji numerycznej.
Źródło:
Journal of Theoretical and Applied Mechanics; 2001, 39, 1; 79-103
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
UAV program motion and control in prescribed mission
Programowany ruch i sterowanie UAV w zadanej misji
Autorzy:
Blajer, W.
Graffstein, J.
Krawczyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/281074.pdf
Data publikacji:
1998
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
aerospace dynamics and control
inverse simulation
control system design
Opis:
The paper deals with the inverse simulation problem of aircraft general motion. The aircraft is constrained to follow a specified 3D trajectory (two program constraints), and two other demands, are imposed on airframe attitude with respect to the trajectory and on flying speed. The guidelines for effective modelling of aircraft prescribed trajectory flight are discussed, and a method for computing time histories of state variables and program control (that ensures the programmed motion realization) is developed. Some results of numerical simulations are reported.
Praca dotyczy zagadnienia symulacji odwrotnej ruchu samolotu. Żąda się, by samolot wykonywał lot po zadanej trajektorii przestrzennej (dwa więzy programowe) a dodatkowymi wymaganiami są narzucone zmiany konfiguracji płatowca względem trajektorii oraz prędkości lotu. Dyskutuje się sposób modelowania tak określonego ruchu programowego oraz przedstawia metodę wyznaczania przebiegów w czasie zmiennych stanu tego ruchu oraz wymaganego sterowania samolotem. Zamieszcza się wyniki symulacji numerycznych.
Źródło:
Journal of Theoretical and Applied Mechanics; 1998, 4; 963-978
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dendrite growth in selector-root area of single crystal CMSX-4 turbine blades
Autorzy:
Bogdanowicz, W.
Tondos, A.
Krawczyk, J.
Albrecht, R.
Sieniawski, J.
Powiązania:
https://bibliotekanauki.pl/articles/1058103.pdf
Data publikacji:
2016-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.66.Dk
61.72.-y
61.10.Nz
Opis:
The single crystal turbine blades made of CMSX-4 nickel-based superalloy were studied. The turbine blades were obtained by the Bridgman technique with withdrawal rate of 5 mm/min. The samples, cut-off from root part of blades and containing the fragment of the selector, were studied. The effect of selector geometry on the dendrites growth and defects formation in the selector-root area of the blade were analyzed. The Laue diffraction, scanning electron microscopy, and X-ray diffraction topography were applied. It was found that, during crystallization of the selector, the dendrite cores, after reaching the surface of mould, may bend, if the angle between dendrite cores and the mould surface was equal to 12°. When the angle was equal to 24° the growth of dendrites has been stopped. It can be stated that the defects, which appeared in the selector were inherited by the root part.
Źródło:
Acta Physica Polonica A; 2016, 130, 4; 1107-1109
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie lakazy natywnej i immobilizowanej do usuwania p-anizydyny
The p-anisidine removal using native and immobilized forms of laccase
Autorzy:
Bryjak, J.
Matysik, M.
Krawczyk, W.
Powiązania:
https://bibliotekanauki.pl/articles/2072143.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
anizydyna
lakaza
reaktory okresowe
utlenianie
anisidine
laccase
batch reactors
oxidation
Opis:
Wykorzystanie lakazy do utleniania związków fenolowych w wodach odpadowych uznawane jest za metodę perspektywiczną. Z tego powodu w badaniach zastosowano enzym natywny i immobilizowany do utleniania p-anizydyny, co prowadzi do powstania rodników i ich spontanicznej polimeryzacji. Ułatwia to późniejszą sedymentację lub filtrację uzyskanych produktów. Wykazano, że lakaza jest stabilizowana w obecności 10% 2-propanoic Dodatkowo w tym układzie nie dochodzi do wytrącania produktów na powierzchni wyselekcjonowanego nośnika
Applications of laccase in specialty wastewater treatment were recently increasingly reported. In this work native and immobilized laccase was used for p-anisidine oxidation to form polymerized phenolic compounds that can be easily removed by sedimentation or filtration. It was shown that 10% 2-propanol in the reaction mixture stabilized both forms of laccase, Additionally, it prevented strong sorption of oxidized products on the surface of selected enzymecarrier preparation.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 6; 523--524
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of sustainability assessment method of coal mines
Autorzy:
Burchart-Korol, D.
Krawczyk, P.
Czaplicka-Kolarz, K.
Turek, M.
Borkowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/92001.pdf
Data publikacji:
2014
Wydawca:
Główny Instytut Górnictwa
Tematy:
sustainability
hard coal mine
life cycle assessment (LCA)
cost-benefit analysis
rozwój zrównoważony
kopalnia węgla kamiennego
analiza cyklu życia
analiza kosztów i korzyści
Opis:
Purpose This paper presents an algorithm developed to assess all aspects of sustainable development for hard coal mines. Additionally, an algorithm to assess the environmental efficiency and cost efficiency of mining production processes was presented. Methods To develop the computation algorithm, detailed models were proposed for environmental assessments using Life Cycle Assessment (LCA), whereas Cost-Benefit Analysis (CBA) was proposed for economic and social assessments. Results The algorithm developed is used when preparing a ranking of hard coal mines which considers the main aspects of sustainable development – environmental, economic and social. The tool also enables the performance of both environmental and cost assessment for particular unit processes of mining production. Practical implications The practical purpose is to devise an algorithm that will perform both partial and aggregated assessment of all aspects of the sustainable development of coal mines in Poland. Originality/ value It is the first method which includes all aspects of sustainable development and considers the process approach to assess coal mines.
Źródło:
Journal of Sustainable Mining; 2014, 13, 4; 5-11
2300-1364
2300-3960
Pojawia się w:
Journal of Sustainable Mining
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Częstość występowania naczyniowego uszkodzenia mózgu w populacji powiatu ostrowieckiego
Prevalence of vascular brain damage among inhabitants of the Ostrowiec Swietokrzyski Province
Autorzy:
Cichonska, M.
Borek, M.
Krawczyk, W.
Ilzecka, J.
Powiązania:
https://bibliotekanauki.pl/articles/3858.pdf
Data publikacji:
2012
Wydawca:
Instytut Medycyny Wsi
Źródło:
Medycyna Ogólna i Nauki o Zdrowiu; 2012, 18(47), 2
2083-4543
Pojawia się w:
Medycyna Ogólna i Nauki o Zdrowiu
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Testing the randomness of lithostratigraphic successions with the Markov Chain methods
Autorzy:
Doktor, M.
Krawczyk, A.
Mastej, W.
Powiązania:
https://bibliotekanauki.pl/articles/191918.pdf
Data publikacji:
2010
Wydawca:
Polskie Towarzystwo Geologiczne
Tematy:
Markov chain methods
Monte Carlo methods
coal-bearing successions
Opis:
The crucial role in the studies on layer successions in lithostratigraphic sections with the application of stochastic model of depositional processes represented by the Markov chain is played by correct estimation of the matrix of transition numbers between lithofacies expected in a random sequence. Methods known from the literature are iteration procedures, which do not ensure quick, general solution. Hence, we propose a universal method based upon the Monte Carlo simulation technique. This method enables the researcher to estimate precisely and reliably the expected matrix of facies transitions.
Źródło:
Annales Societatis Geologorum Poloniae; 2010, 80, No 2; 163-166
0208-9068
Pojawia się w:
Annales Societatis Geologorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis Procedure of the Positronium Lifetime Spectra for the J-PET Detector
Autorzy:
Dulski, K.
Zgardzińska, B.
Białas, P.
Curceanu, C.
Czerwiński, E.
Gajos, A.
Głowacz, B.
Gorgol, M.
Hiesmayr, B.
Jasińska, B.
Kisielewska-Kamińska, D.
Korcyl, G.
Kowalski, P.
Kozik, T.
Krawczyk, N.
Krzemień, W.
Kubicz, E.
Mohammed, Muhsin
Pawlik-Niedźwiecka, M.
Niedźwiecki, S.
Pałka, M.
Raczyński, L.
Raj, J.
Rudy, Z.
Sharma, N.
Sharma, S.
Shivani, Shivani
Shopa, R.
Silarski, M.
Skurzok, M.
Wieczorek, A.
Wiślicki, W.
Zieliński, M.
Moskal, P.
Powiązania:
https://bibliotekanauki.pl/articles/1033298.pdf
Data publikacji:
2017-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
07.05.Kf
13.30.Ce
14.60.-z
78.47.-p
Opis:
Positron annihilation lifetime spectroscopy has shown to be a powerful tool to study the nanostructures of porous materials. Positron emission tomograph is a device allowing imaging of metabolic processes e.g. in human bodies. A newly developed device, the Jagiellonian PET will allow positron annihilation lifetime spectroscopy in addition to imaging, thus combining both analyses providing new methods for physics and medicine. In this contribution we present a computer program that is compatible with the Jagiellonian PET software. We compare its performance with the standard program LT 9.0 by using positron annihilation lifetime spectroscopy data from hexane measurements at different temperatures. Our program is based on an iterative procedure, and our fits prove that it performs as good as LT 9.0.
Źródło:
Acta Physica Polonica A; 2017, 132, 5; 1637-1640
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Podstawy budowy, regulacji rozpływu i monitoringu sieci odmetanowania
Basic principles of design and monitoring of the methane drainage network
Autorzy:
Dziurzyński, W.
Krach, A.
Pałka, T.
Krawczyk, J.
Wasilewski, St.
Powiązania:
https://bibliotekanauki.pl/articles/165400.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
odmetanowanie
monitoring
obliczenia rozpływu
regulacja
methane drainage
flow calculations
flow control
Opis:
W artykule przedstawiono podstawy funkcjonowania monitoringu sieci odmetanowania. Ocenia się, że wprowadzenie do praktyki monitoringu i regulacji pozwoli na poprawę efektywności ujęcia metanu. Omówiono podstawy teoretyczne regulacji przepływu mieszaniny metanu i powietrza w rurociągu odmetanowania oraz przedstawiono koncepcję automatycznej regulacji przepływu w sieci rurociągu odmetanowania. Przyjęto, że zastosowanie metod numerycznych i programu komputerowego VentOdmet do wyznaczania stanu sieci odmetanowania w połączeniu z obliczeniami programem VentGraph modelującym rozpływ powietrza w sieci wentylacyjnej rejonu umożliwia badanie wzajemnego wpływu tych dwóch sieci, w tym obliczanie rozpływu gazu w rurociągu odmetanowania i regulacji rozpływu. Przedstawiono przykład obliczeń na opracowanym modelu numerycznym wykonanej regulacji rozpływu metanu w sieci rurociągu odmetanowania kopalni „Z”. Wyniki obliczeń przedstawiono w postaci graficznej, korzystając ze schematu połączeń rurociągu odmetanowania.
This paper briefly outlines the operating principles of monitoring of the methane drainage network. The introduction of methane flow control and monitoring to the mining practice is expected to help improve the efficiency of methane recovery. Theoretical background of the regulation of the flow in the methane drainage network and a concept of automatic flow control of the drainage system are presented. It is assumed that the application of specific numerical procedures and co-operation of the computer program VentOdmet, which is modelling operation of the methane drainage network, with the VentGraph program for modelling the airflow in ventilation network in the area, should allow for the interactions between those two networks to be reliably tested, including calculation and control of the methane drainage flows. Regulation of the drainage system at the colliery Zofiówka is presented as an example. Calculation data have been displayed graphically by use of the schematic diagram of methane control pipeline connections.
Źródło:
Przegląd Górniczy; 2015, 71, 7; 34-42
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation of flow of fire gases in a ventilation network of a mine with a application of mathematical models of a different complexity implemented in the VentGraph software
Symulacja przepływu gazów pożarowych w sieci wyrobisk kopalni za pomocą programu VentGraph dla modeli matematycznych o zróżnicowanym stopniu uproszczenia
Autorzy:
Dziurzyński, W.
Krawczyk, J.
Krach, A.
Pałka, T.
Powiązania:
https://bibliotekanauki.pl/articles/348815.pdf
Data publikacji:
2012
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
wentylacja kopalń
pożary podziemne
przepływ nieustalony
wilgotne powietrze
mine ventilation
mine fires
unsteady flow
humid air
numerical simulations
Opis:
VENTGRAPH computer programmes, enable the forecasting of ventilation processes under normal conditions and in emergency situations, such as a fire. The state of the flow of air in a network of headings may be forecasted by numerical simulations using a set of mathematical models, which are constructed at various degrees of simplification. Variants considering dry air only and more complex mathematical model, which takes into consideration the flow of the mix of humid air and gases were compared. Both variants consider relevant fire models and exchange of heat along the flow routes of fire gases and buoyancy effects. This models are the result of the optimal selection of individual components, performed in such a way as to conduct a sufficiently reliable simulation of the phenomena as set forward herein in as short a time as possible. Paper contains a study that is devoted to an instance of forecasting the process of ventilation that are caused by an open subsurface fire in the operational headings of mines that are ventilated by upward air current. This has made it possible to execute a qualitative analysis of the changes in the flow rate of the mix of air and fire gases, and also to verify the possibility of reversing the air currents that ventilate the longwalls. The results obtained have been presented in the form of time graphs of changes in the observed parameters.
System programów komputerowych VENTGRAPH jest przeznaczony do prognozowania procesów przewietrzania w warunkach normalnych oraz w stanie awaryjnym jakim jest pożar i charakteryzuje się szerokimi możliwościami obliczeniowymi i łatwością obsługi programu jak i interpretacji wyników jego obliczeń. Stan przepływu powietrza w sieci wyrobisk można przewidywać przy pomocy badań symulacyjnych w oparciu o złożone modele matematyczne konstruowane w różnym stopniu uproszczenia. W artykule porównano warianty opisujące przepływ suchego lub wilgotnego powierza. Oba warianty uwzględniają odpowiednie modele ogniska pożaru a także przepływ mieszaniny powietrza i gazów z równoczesną wymianą ciepła wzdłuż dróg przepływu gazów pożarowych a także wpływ depresji pożaru. Modele te są efektem optymalnego doboru poszczególnych składników, dokonanego tak aby w możliwie krótkim czasie prowadzić dostatecznie wierną symulację rozpatrywanych zjawisk. Przedstawiono przykład prognozy procesu przewietrzania wywołanego otwartym pożarem podziemnym w wyrobiskach czynnych kopalń przewietrzanych prądem wznoszącym. Pozwoli to na dokonanie analizy jakościowej zmian wydatku przepływu mieszaniny powietrza i gazów pożarowych oraz sprawdzenia możliwości odwrócenia prądów powietrza, którymi przewietrzane są ściany. Uzyskane wyniki przedstawiono w postaci wykresów czasowych zmian obserwowanych parametrów.
Źródło:
AGH Journal of Mining and Geoengineering; 2012, 36, 3; 115-126
1732-6702
Pojawia się w:
AGH Journal of Mining and Geoengineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Strategies in Crowd and Crowd Structure
Autorzy:
Gawroński, P.
Malarz, K.
Krawczyk, M.
Malinowski, J.
Kupczak, A.
Sikora, W.
Kułakowski, K.
Wąs, J.
Kantelhardt, J.
Powiązania:
https://bibliotekanauki.pl/articles/1400168.pdf
Data publikacji:
2013-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
02.50.Le
89.65.-s
05.45.-a
Opis:
In an emergency situation, imitation of strategies of neighbours can lead to an order-disorder phase transition, where spatial clusters of pedestrians adopt the same strategy. We assume that there are two strategies, cooperating and competitive, which correspond to a smaller or larger desired velocity. The results of our simulations within the Social Force Model indicate that the ordered phase can be detected as an increase of spatial order of positions of the pedestrians in the crowd.
Źródło:
Acta Physica Polonica A; 2013, 123, 3; 522-525
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental investigations on punching shear of flat slabs made from lightweight aggregate concrete
Badania eksperymentalne przebicia płyt płaskich wykonanych z lekkiego betonu kruszywowego
Autorzy:
Gołdyn, M.
Krawczyk, Ł.
Ryżyński, W.
Urban, T.
Powiązania:
https://bibliotekanauki.pl/articles/230726.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
przebicie
beton lekki kruszywowy
popiół lotny
naprężenia styczne
trzpień dwugłówkowy
punching shear
lightweight aggregate concrete
fly ash
shear stress
double-headed stud
Opis:
In the paper the results of authors’ experimental investigations concerning punching shear of flat slabs made from lightweight concrete with "CERTYD" aggregate were presented. This aggregate is manufactured from fly ash accumulated in electrostatic precipitators and ash-slag mixture from wet furnace waste generated in the process of burning hard coal in a combined heat and power plant. A total of six specimens with dimensions of 2400 x 2400 x 200 mm were tested. The slabs were connected with short fragments of columns of a cross-section of 250 x 250 mm and a height of 150 mm. The main variable parameter was slab longitudinal reinforcement ratio ρl, equal to 0.47, 0.86 and 1.23% intentionally. One of the pair of models with the same longitudinal reinforcement was the control specimen and did not contain shear reinforcement.
W pracy przedstawiono wyniki własnych badań eksperymentalnych dotyczących przebicia płaskich płyt z betonu lekkiego, wykonanego na kruszywie „CERTYD”, produkowane przez firmę LSA sp. z o.o. z Białegostoku. Kruszywo to powstaje z popiołów lotnych zgromadzonych w elektrofiltrach i mieszanki popiołowo-żużlowej z mokrego usuwania odpadów piecowych, wytwarzanych w procesie spalania węgla kamiennego w elektrociepłowni. Zbadano 6 modeli płyt płaskich o wymiarach 2400 x 2400 x 200 mm, połączonych z krótkimi fragmentami słupów o przekroju 250 x 250 mm i wysokości 150 mm. Głównym parametrem zmiennym był stopień zbrojenia podłużnego ρl, równy w zmierzeniu 0,47, 0,86 oraz 1,23%. Jeden z pary modeli o tym samym stopniu zbrojenia stanowił element odniesienia dla modelu zbrojonego na przebicie.
Źródło:
Archives of Civil Engineering; 2018, 64, 4/I; 293-306
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Oxygen Staging on Nitrogen Conversion in Oxy-Fuel CFB Environment
Autorzy:
Jankowska, S.
Czakiert, T.
Krawczyk, G.
Borecki, P.
Jesionowski, Ł.
Nowak, W.
Powiązania:
https://bibliotekanauki.pl/articles/185424.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
paliwo tlenowe
CFB
oxy-fuel
fuel-N
Opis:
This paper presents a study on nitrogen conversion in oxy-fuel coal combustion in a pilot scale CFB 0.1 MWth facility. The paper is focused on fuel-N behaviour in the combustion chamber when the combustion process is accomplished under oxy-fuel CFB conditions. The analysis is based on infurnace sampling of flue gas and calculations of the conversion ratios of fuel-nitrogen (fuel-N) to NO, NO2, N2O, NH3 and HCN. For the tests, O2/CO2 mixtures with the oxygen content of 21 vol.% (primary gas) and with the oxygen content varied from 21 to 35 vol.% (secondary gas), were used as the fluidising gas. Measurements were carried out in 4 control points located along the combustion chamber: 0.43 m, 1.45 m, 2.50 m and 4.88 m. Results presented below indicate that an increased oxygen concentration in the higher part of the combustion chamber has strong influence on the behaviour of fuel based nitrogen compounds.
Źródło:
Chemical and Process Engineering; 2014, 35, 4; 489-496
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Human tissue investigations using PALS technique - free radicals influence
Autorzy:
Jasińska, B.
Zgardzińska, B.
Chołubek, G.
Pietrow, M.
Gorgol, M.
Wiktor, K.
Wysogląd, K.
Białas, P.
Curceanu, C.
Czerwiński, E.
Dulski, K.
Gajos, A.
Głowacz, B.
Hiesmayr, B.
Jodłowska-Jędrych, B.
Kamińska, D.
Korcyl, G.
Kowalski, P.
Kozik, T.
Krawczyk, N.
Krzemień, W.
Kubicz, E.
Mohammed, Muhsin
Pawlik-Niedźwiecka, M.
Niedźwiecki, S.
Pałka, M.
Raczyński, L.
Rudy, Z.
Sharma, N.
Sharma, S.
Shopa, R.
Silarski, M.
Skurzok, M.
Wieczorek, A.
Wiktor, H.
Wiślicki, W.
Zieliński, M.
Moskal, P.
Powiązania:
https://bibliotekanauki.pl/articles/1057941.pdf
Data publikacji:
2017-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
positron annihilation
positronium
free radicals
tissues
uterine leiomyomas
Opis:
The positron annihilation lifetime spectroscopy was applied to the samples of the human uterine leiomyomas and the normal myometrium tissues taken from the selected place of the uterus during a surgery. The method indicated differences in values of the measured positron annihilation lifetime spectroscopy parameters (lifetimes and intensities) between healthy and diseased tissue samples. The additional measurements were performed either in darkness or in presence of visible light which influenced the free radicals present in both kind of tissues and, as a result, made changes in free annihilation and o-Ps decay lifetime and intensity values.
Źródło:
Acta Physica Polonica A; 2017, 132, 5; 1556-1558
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the Forming Process of Energy-Absorbing Elements made from 7000 Series High-Strength Aluminum Alloy
Autorzy:
Jaśkiewicz, K.
Skwarski, M.
Polak, S.
Gronostajski, Z.
Krawczyk, J.
Kaczyński, P.
Chorzępa, W.
Powiązania:
https://bibliotekanauki.pl/articles/355556.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminum alloys
hot forming
Opis:
The paper covers the research on the process of solutionizing of 7075 aluminum alloy in cold tools during the stamping of a high-strength structural element (B-pillar’s base). For technological reasons, in order to obtain high strength parameters of the 7075 alloy, it is necessary to carry out a solutionization process, which allows to obtain dispersion strengthening during ageing process. Properly performed heat treatment of the alloy increases the strength of the material to approx. 600 MPa. The combination of the process of solutionization with simultaneous shaping is aimed at improving and simplifying technological operations of aluminum alloy stamping, shortening the duration of the manufacturing process and reducing production costs. The manufactured lower part of the B-pillar will be used for the verification of the validity of the developed method. During the experiment, a series of stamping tests were carried out, in which the lubricants, pressure and position of the upper and lower blankholders were the variables. The obtained results allow to estimate the influence of the cooling conditions on the strength of the drawpieces obtained after the process of artificial ageing. In order to verify and analyse the results more quickly, a numerical simulation was carried out.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 2; 697-705
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies