Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Korkmaz, E." wg kryterium: Autor


Wyświetlanie 1-8 z 8
Tytuł:
Fabrication of Transparent Yttria Ceramics by Spark Plasma Sintering
Autorzy:
Korkmaz, E.
Sahin, F.
Powiązania:
https://bibliotekanauki.pl/articles/1032083.pdf
Data publikacji:
2017-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.05.Je
81.20.Ev
81.40.Tv
42.70.Hj
Opis:
Rapid densification of yttria (Y₂O₃) ceramics without sintering aids via spark plasma sintering at relatively low temperature of 1300°C for 40 minutes at two-step pressure profile, followed by post-annealing at 1050°C for 6 hours in air was attempted. Effect of preload pressure on microstructure, Vickers hardness, fracture toughness and optical in-line transmittance was investigated. Densification during spark plasma sintering did not involve any phase transformation and all phases have shown cubic structure according to X-ray analysis. The highest hardness and fracture toughness value was recorded to be 7.60±0.18 GPa and 1.16±0.07 MPa m^{1/2} with 10 MPa preload and 100 MPa final load. In addition to this, the highest transmittance with a value of 76.7% at a wavelength of 2000 nm was obtained when studied with 10 MPa preload and 100 MPa final load.
Źródło:
Acta Physica Polonica A; 2017, 131, 3; 460-462
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Estimation of passenger-kilometer and tonne-kilometer values for highway transportation in Turkey using the flower pollination algorithm
Autorzy:
Korkmaz, E.
Akgungor, A. P.
Powiązania:
https://bibliotekanauki.pl/articles/198132.pdf
Data publikacji:
2018
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
passenger-kilometer
tonne-kilometer
flower pollination algorithm
osobokilometr
tonokilometr
algorytm zapylania kwiatowego
Opis:
Within the scope of this study, intercity passenger and freight movements in Turkey are estimated by using the flower pollination algorithm (FPA), while demand forecasts are performed on transport systems considering possible future scenarios. Since the passenger and freight transport system in Turkey mainly involves road transport, passenger-kilometer and tonne-kilometer values of this system are estimated. By relying on three independent parameters, models were developed in three different forms: linear, force and semi-quadratic. Population (P) between 1990 and 2016, gross domestic product per capita (GDPperC) in US dollars and the number of vehicles were used as input parameters for the development of the models. When the passenger-kilometer models were created, the number of cars, buses and minibuses that are predominantly used for passenger transportation was preferred for the number of vehicles, while the number of trucks and vans used for cargo transportation were taken into consideration in the tonne-kilometer models. The coefficients of the models were determined by FPA optimization, with models developed to estimate passenger-kilometer and tonne-kilometer values. The model results were compared with the observation values and their performance was evaluated. Two different scenarios were created to estimate passenger-kilometer and tonne-kilometer in 2030. Parallel to the increase in population and welfare level, it is predicted that demand for passenger and freight transport will increase. In particular, the higher input parameter values in Scenario 1 significantly affect the increase in demand, leading to a demand increase of around 50%. In addition, the FPA has demonstrated effective performance in predicting the demand for passenger and freight transport and that it can be used in many different areas.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2018, 98; 45-52
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of different approaches in traffic forecasting models for the D-200 highway in Turkey
Autorzy:
Dogan, E.
Korkmaz, E.
Akgungor, A. P.
Powiązania:
https://bibliotekanauki.pl/articles/196318.pdf
Data publikacji:
2018
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
traffic forecasting
SARIMA
differential evolution algorithm
artificial bee colony algorithm
prognozowanie ruchu
algorytm ewolucji różnicowej
algorytm sztucznej kolonii pszczół
Opis:
Short-term traffic estimations have a significant influence in terms of effectively controlling vehicle traffic. In this study, short-term traffic forecasting models have been developed based on different approaches. Seasonal autoregressive integrated moving average (SARIMA), artificial bee colony (ABC) and differential evolution (DE) algorithms are the techniques used in the optimization of models, which have been developed by using observation data for the D-200 highway in Turkey. 80% of the data were used for training, with the remaining data used for testing. The performances of the models were illustrated with mean absolute errors (MAEs), mean absolute percentage errors (MAPEs), the coefficient of determination (R2) and the root-mean-square errors (RMSEs). It is understood that all the models provided consistent and useful results when the developed models were compared with the statistical results. In the models created separately for two lanes, the R2 values of the models were calculated to be approximately 92% for the right lane, which is generally used by heavy vehicles, and 88% for the left lane, which is used by less traffic. Based on the MAE and RMSE values, the model developed by the ABC algorithm gave the lowest error and showed more effective performance than the other approaches. Thus, the ABC model showed that it is appropriate for use on other highways in Turkey.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2018, 99; 25-42
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Organic acids, sugars, phenolic compounds and antioxidant activity of Malus floribunda coccinella fruit, peel and flesh
Autorzy:
Coklar, H.
Akbulut, M.
Alhassan, I.
Kirpitci, Ş.
Korkmaz, E.
Powiązania:
https://bibliotekanauki.pl/articles/12203559.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Opis:
Malus floribunda coccinella is a landscape tree that is generally planted for its pinky flowers and small reddish fruits. The red-fleshed fruits, called crab apples, are rich in anthocyanins and are assumed as an environmental pollution material during the fruit bearing season. The aims of this research were to determine the organic acids, sugars, sugar:acid ratio, color, phenolic compounds and antioxidant activity of the fruit and also to identify the phenolic compounds, monomeric anthocyanins content and antioxidant activities in the peel, flesh and whole fruit. Malic acid (25.394 g kg–1 FW) was the main organic acid of the fruit. In fruits, amounts of sucrose, glucose and fructose were found to be 0.497, 0.504 and 4.334 g 100 g–1 FW, respectively. Highest total phenolic concentration and antioxidant activity values were observed in the peel among the fractions, while protocatechuic and cinnamic acids, rutin, isorhamnetin-3-glucoside, quercetin, procyanidin B1, (+)-catechin and cyanidin-3-galactoside were predominant phenolics of the peel. Highest amounts of chlorogenic acid and (-)-epicatechin were determined in the flesh. Cyanidin-3-galactoside concentration in the flesh was approximately half the amount of that in the peel.
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2018, 17, 5; 47-59
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of flunixin meglumine and meloxicam influence on postoperative and oxidative stress in ovariohysterectomized bitches
Autorzy:
Yilmaz, O.
Korkmaz, M.
Jaroszewski, J.J.
Yazici, E.
Ulutas, E.
Saritas, Z.K.
Powiązania:
https://bibliotekanauki.pl/articles/31619.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
The aim of this study was to compare the effect of flunixin meglumine (FM) and meloxicam (M) on postoperative and oxidative stress in ovariohysterectomized bitches. Twenty four bitches were divided into three groups (n=8 in each) and treated during premedication as follows: FM (2.2 mg/kg, iv, Fluvil, Vilsan, Turkey), M (0.2 mg/kg, sc, Maxicam, Sanovel, Turkey) or 0.9% saline (1 ml, iv, IE, Turkey) - control (C) group. The concentrations of serum cortisol, nitric oxide (NO), malondialdehyde (MDA), antioxidant potential (AOP) and glutation (GSH) were measured in blood samples collected during incision (0 h), closure of incision line (0.5 h) and 1, 2.5, 12 and 24 hours after incision. It was observed that cortisol level was higher at 0.5, 1 and 2.5 h in group C (p < 0.05), 0.5 h in group FM (p < 0.001), and 1 and 2.5 h in group M (p < 0.01), as compared to that determine at 0 h. Group C showed higher cortisol level during 0.5 h (p < 0.05) than that found in the other groups. Group FM displayed lower levels during 1 h (p < 0.01) and 2.5 h (p < 0.05) as compared to those observed in other groups. Concentrations of MDA, AOP and GSH between all the groups did not show any significant differences. MDA level was higher at 0.5 and 1 h in groupM (p < 0.05) than that found in group C and it was the lowest at 2.5 h in group C (p < 0.05). AOP was higher at 2.5 h in group FM and M (p < 0.05) than that observed in group C, and at 12 and 24 h in group M than that found in group C and FM. GSH did not show any significant differences between the groups. NO level in group FM after 12 h was higher (p < 0.05) than that at 0.5, 1 and 24 h. Moreover, NO level was lower at 0.5 (p < 0.01), 1 (p < 0.05) and 24 h (p < 0.05) in group FM than that observed in group C and M. In conclusion, flunixin meglumine decreases cortisol and NO levels more efficiently than meloxicam. Therefore, it is suggested that postoperative stress following ovariohysterectomy may be prevented by flunixin meglumine in bitches.
Źródło:
Polish Journal of Veterinary Sciences; 2014, 17, 3
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Chip Amount on Microstructural and Mechanical Properties of A356 Aluminum Casting Alloy
Autorzy:
Kaya, A. Y.
Özaydın, O.
Yağcı, T.
Korkmaz, A.
Armakan, E.
Çulha, O.
Powiązania:
https://bibliotekanauki.pl/articles/2079825.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
A356
gravity casting
chip melting
mechanical properties
recycling
odlewanie grawitacyjne
topienie
właściwości mechaniczne
recykling
Opis:
Aluminum casting alloys are widely used in especially automotive, aerospace, and other industrial applications due to providing desired mechanical characteristics and their high specific strength properties. Along with the increase of application areas, the importance of recycling in aluminum alloys is also increasing. The amount of energy required for producing primary ingots is about ten times the amount of energy required for the production of recycled ingots. The large energy savings achieved by using the recycled ingots results in a significant reduction in the amount of greenhouse gas released to nature compared to primary ingot production. Production can be made by adding a certain amount of recycled ingot to the primary ingot so that the desired mechanical properties remain within the boundary conditions. In this study, by using the A356 alloy and chips with five different quantities (100% primary ingots, 30% recycled ingots + 70% primary ingots, 50% recycled ingots + 50% primary ingots, 70% recycled ingots + 30% primary ingots, 100% recycled ingots), the effect on mechanical properties has been examined and the maximum amount of chips that can be used in production has been determined. T6 heat treatment was applied to the samples obtained by the gravity casting method and the mechanical properties were compared depending on the amount of chips. Besides, microstructural examinations were carried out with optical microscopy techniques. As a result, it has been observed that while producing from primary ingots, adding 30% recycled ingot to the alloy composition improves the mechanical properties of the alloy such as yield strength and tensile strength to a certain extent. However, generally a downward pattern was observed with increasing recycled ingot amount.
Źródło:
Archives of Foundry Engineering; 2021, 21, 3; 19-26
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fluctuations in melatonin content and its effects on the ageing process of lettuce seeds during storage
Autorzy:
Yakupoğlu, G.
Köklü, S.
Karaca, A.
Düver, E.
Reiter, R.J.
Korkmaz, A.
Powiązania:
https://bibliotekanauki.pl/articles/13051242.pdf
Data publikacji:
2021
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2021, 20, 3; 77-88
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design of Istanbul disaster information system
Autorzy:
Torun, M. K.
Korkmaz, N.
Karaman, H.
Yagci, A.
Yildiz, S. S.
Ozkan, A.
Sahin, M.
Tari, E.
Powiązania:
https://bibliotekanauki.pl/articles/225748.pdf
Data publikacji:
2006
Wydawca:
Politechnika Warszawska. Wydział Geodezji i Kartografii
Tematy:
klęski żywiołowe
zarządzanie kryzysowe
Turcja
natural disasters
crisis management
Turkey
Źródło:
Reports on Geodesy; 2006, z. 5/80; 527-536
0867-3179
Pojawia się w:
Reports on Geodesy
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-8 z 8

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies