Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kim, T. H." wg kryterium: Autor


Tytuł:
Specific Heat of RBa$\text{}_{2}$Cu$\text{}_{3}$O$\text{}_{7-x}$ and RBaSrCu$\text{}_{3}$O$\text{}_{7-x}$ Compounds (R = Sm, Dy, Er)
Autorzy:
Tarnawski, Z.
Kim-Ngan, N.-T. H.
Wang, X. Z.
Duijn, V. H. M.
Franse, J. J. M.
Powiązania:
https://bibliotekanauki.pl/articles/1968860.pdf
Data publikacji:
1998-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
74.70.-b
75.40.-s
Opis:
The low-temperature specific-heat C(T) data of high-T$\text{}_{c}$ superconductors RBa$\text{}_{2}$Cu$\text{}_{3}$O$\text{}_{7-x}$(R123O$\text{}_{7-x}$) were reviewed. A discussion of the C(T) data obtained on single-crystalline samples of Er123O$\text{}_{7-x}$ and Sm123O$\text{}_{7-x}$ compounds in applied magnetic fields for better evaluation of the crystal-electric-field parameters is given. The C(T) measurements of Sr-substituted compounds RBaSrCu$\text{}_{3}$O$\text{}_{7}$ revealed the λ-type of peak related to the antiferromagnetic order at 1.2 K and 0.6 K respectively for Dy- and Er-compounds. The magnetic singlet ground state in these compounds is produced by weak exchange interactions of -0.05 T/μ$\text{}_{B}$ and -0.035 T/μ$\text{}_{B}$, respectively. For Nd- and Sm-compounds, only a broad anomaly around 0.6 K was observed which is well fitted with a Schottky-type anomaly with an energy splitting of 1.4 K.
Źródło:
Acta Physica Polonica A; 1998, 93, 3; 513-522
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect Of Carbon Nanotubes On The Properties Of Spark Plasma Sintered ZrO2/CNT Composites
Wpływ nanorurek węglowych na właściwości spiekanych metodą sps kompozytów ZrO2/CNT
Autorzy:
Shim, D. H.
Jung, S. S.
Kim, H. S.
Cho, H.
Kim, J. K.
Kim, T. G.
Yoon, S. J.
Powiązania:
https://bibliotekanauki.pl/articles/351266.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
CNT
ZrO2
composite
SPS
kompozyty
Opis:
Zirconia matrix ZrO2/CNT composite materials reinforced with multiwall carbon nanotubes were fabricated using a spark plasma sintering technique. The effects of the amount of CNTs addition, sintering temperature and sintering pressure on the properties of the resulting ZrO2/CNT composites were examined. 0 to 9 vol. % CNTs were dispersed in zirconia powder, and the resulting mixture was sintered. The electrical conductivity, hardness, flexural strength, and density were measured to characterize the composites. The friction and wear properties of the composites were also tested. The flexural strength and friction coefficient of the composites were improved with up to 6 vol.% of CNT addition and the flexural strength showed a close relationship with the relative density of the composite. The electrical conductivity increased with increasing proportion of the CNTs, but the efficiency was reduced at more than 6 vol.% CNTs.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1315-1318
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of an odor source in Changwon City using multi-monitoring methods. A case study of Korea
Autorzy:
Prueksakorn, K.
Kim, T.-H.
Powiązania:
https://bibliotekanauki.pl/articles/207109.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
odor
industrial plants
industrial city
odor measurements
odor nuisance
odor pollutants
odorimetry
Changwon City
zapach
zakłady przemysłowe
miasto przemysłowe
pomiary zapachu
uciążliwość zapachowa
badanie zapachu
emisja substancji zapachowych
jakość zapachowa powietrza
metody pomiarowe uciążliwości zapachowych
ocena uciążliwości zapachu
Changwon
Opis:
It is a regular occurrence for residents living near industrial plants to complain regarding odor problems. Those plants may also try to protect themselves from liability by demonstrating some environmental evidence. An investigation to prove whether the accused industrial complex is the major source of released odors among several potential sources of odor problems was carried out using the combination of measurement techniques. The multi-monitoring methods comprise utilizations of olfactory system, questionnaire, electronic detector and chemical analysis. This study demonstrated the achievement of integrating scientific monitoring methods to support the enforcement of odor acts for management in the industrial city.
Źródło:
Environment Protection Engineering; 2015, 41, 4; 109-130
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication and Characterization of CoCrFeNiMn High Entropy Alloy Powder Processed by Gas Atomization
Autorzy:
Park, T. G.
Lee, S. H.
Lee, B.
Cho, H. M.
Choi, W. J.
Kim, B. S.
Shin, K. S.
Kim, T.-S.
Powiązania:
https://bibliotekanauki.pl/articles/353649.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high entropy alloy
gas atomization
spark plasma sintering
CoCrFeNiMn
Opis:
In this study, precisely controlled large scale gas atomization process was applied to produce spherical and uniform shaped high entropy alloy powder. The gas atomization process was carried out to fabricate CoCrFeNiMn alloy, which was studied for high ductility and mechanical properties at low temperatures. It was confirmed that the mass scale, single phase, equiatomic, and high purity spherical high entropy alloy powder was produced by gas atomization process. The powder was sintered by spark plasma sintering process with various sintering conditions, and mechanical properties were characterized. Through this research, we have developed a mass production process of high quality and spherical high entropy alloy powder, and it is expected to expand applications of this high entropy alloy into fields such as powder injection molding and 3D printing for complex shaped components.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 1055-1059
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of natural organic matter on adsorption of ionic and non-ionic pharmaceuticals to granular activated carbon
Autorzy:
Oh, H.
Urase, T.
Simazaki, D.
Kim, H.
Powiązania:
https://bibliotekanauki.pl/articles/208222.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
adsorpcja
grupa karboksylowa
kwas klofibrowy
granulowany węgiel aktywny
węgiel aktywny
naturalne substancje organiczne
farmaceutyki
adsorption
carboxylic group
clofibric acid
granular activated carbons
natural organic matters
pharmaceuticals
Opis:
Adsorption of clofibric acid (CA) and propyphenazone (PPZ) to virgin granular activated carbon (GAC) and preloaded GAC was evaluated in the absence or presence of natural organic matter (NOM). In spite of lower log K ow, PPZ showed higher selectivity to GAC than CA, which has a carboxylic group. Adsorption competition between CA and PPZ in binary solutes system decreased the amount of individual compound adsorbed to GAC. Adsorption isotherm data obtained in the presence of NOM showed that NOM in bulk solution or preloaded on GAC could significantly reduce the amounts of CA and PPZ adsorbed to GAC.
Źródło:
Environment Protection Engineering; 2013, 39, 4; 15-28
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Formation of Different Cu Nanopowders and Stability of Cu Fluids Produced by Electrical Explosion of Wire in Liquid
Autorzy:
Nguyen, M.-T.
Kim, J.-H.
Kim, J.-C.
Powiązania:
https://bibliotekanauki.pl/articles/355217.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Cu nanopowder
Cu nanofluids
electrical explosion of wire
stability of nanofluids
Opis:
In this study, copper nanoparticles and nanofluids were synthesized by electrical explosion of wire (EEW) in liquid media such as water, ethanol, and acetone. The effect of the different conditions on the properties of the as-synthesized Cu powders and nanofluids were investigated. X-ray diffraction (XRD) analysis was employed to measure the phase of the as-synthesized powder. Only pure Cu phase appeared in case of acetone condition, but CuO and CuO2 phases could be observed in the others. The EEWed particle size was broadened from under 50 to 100 nm. The results showed that acetone was the best condition for achieving smaller particles, preventing the oxidation of the Cu particles and good stability of the nanofluids.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1453-1457
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of body surface area-based and weight-based dosing format for oral prednisolone administration in small and large-breed dogs
Autorzy:
Nam, A.
Kim, S.M.
Jeong, J.W.
Song, K.H.
Koo, T.S.
Seo, K.W.
Powiązania:
https://bibliotekanauki.pl/articles/2087897.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Źródło:
Polish Journal of Veterinary Sciences; 2017, 3; 611-613
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aluminum Nitride Formation From Aluminum Oxide/Phenol Resin Solid-Gel Mixture By Carbothermal Reduction Nitridation Method
Wytwarzanie azotku aluminium z żelowej mieszaniny tlenku aluminium z żywicą fenolową metodą azotowania podczas carbotermicznej redukcji
Autorzy:
Mylinh, D. T.
Yoon, D. H.
Kim, C.-Y.
Powiązania:
https://bibliotekanauki.pl/articles/356779.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminum nitride
powder
carbothermal reduction
nitridation
solid-gel mixture
azotek aluminium
proszek
redukcja karbotermiczna
azotowanie
żelowa mieszanina
Opis:
Hexagonal and cubic crystalline aluminum nitride (AlN) particles were successfully synthesized using phenol resin and alpha aluminum oxide (α-Al2O3) as precursors through new solid-gel mixture and carbothermal reduction nitridaton (CRN) process with molar ratio of C/Al2O3 = 3. The effect of reaction temperature on the decomposition of phenol resin and synthesis of hexagonal and cubic AlN were investigated and the reaction mechanism was also discussed. The results showed that α-Al2O3 powder in homogeneous solid-gel precursor was easily nitrided to yield AlN powder during the carbothermal reduction nitridation process. The reaction temperature needed for a complete conversion for the precursor was about 1700°C, which much lower than that when using α-Al2O3 and carbon black as starting materials. To our knowledge, phenol resin is the first time to be used for synthesizing AlN powder via carbothermal reduction and nitridation method, which would be an efficient, economical, cheap assistant reagent for large scale synthesis of AlN powder.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1551-1555
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect Of DyMn Alloy-Powder Addition On Microstructure And Magnetic Properties Of NdFeB Sintered Magnets
Wpływ dodatku proszku DyMn na mikrostrukturę i właściwości magnetyczne spiekanych magnesów NdFeB
Autorzy:
Lee, M.-W.
Dhakal, D. R.
Kim, T. H.
Lee, S. R.
Kim, H. J.
Jang, T. S.
Powiązania:
https://bibliotekanauki.pl/articles/357010.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Nd-Fe-B sintered magnets
DyMn-alloy powder
coercivity
low melting point element
magnesy spiekane
proszek DyMn
koercja
elementy o niskiej temperaturze topnienia
Opis:
Micostructural change and corresponding effect on coercivity of a NdFeB sintered magnet mixed with small amount of DyMn powder was investigated. In the sintered magnet mixed with the DyMn alloy-powder Dy-rich shell was formed at outer layer of the main grains, while Mn was mostly concentrated at Nd-rich triple junction phase (TJP), lowering melting temperature of the Nd-rich phase that eventually improved the microstructural characteristics of the gain boundary phase. The coercivity of a magnet increased more than 3.5 kOe by the mixing of the DyMn alloy-powder.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1407-1409
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure and Magnetic Properties of NdFeB Sintered Magnets Diffusion-Treated with Cu/Al Mixed Dyco Alloy-Powder
Autorzy:
Lee, M.-W.
Bae, K.-H.
Lee, S.-R.
Kim, H.-J.
Jang, T.-S.
Powiązania:
https://bibliotekanauki.pl/articles/353351.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Nd-Fe-B sintered magnets
grain boundary diffusion process
low melting point element
DyCo alloy-powder diffusion
Opis:
We investigated the microstructural and magnetic property changes of DyCo, Cu + DyCo, and Al + DyCo diffusion-treated NdFeB sintered magnets. The coercivity of all diffusion treated magnet was increased at 880ºC of 1st post annealing(PA), by 6.1 kOe in Cu and 7.0 kOe in Al mixed DyCo coated magnets, whereas this increment was found to be relatively low (3.9 kOe) in the magnet coated with DyCo only. The diffusivity and diffusion depth of Dy were increased in those magnets which were treated with Cu or Al mixed DyCo, mainly due to comparatively easy diffusion path provided by Cu and Al because of their solubility with Ndrich grain boundary phase. The formation of Cu/Al-rich grain boundary phase might have enhanced the diffusivity of Dy-atoms. Moreover, relatively a large number of Dy atoms reached into the magnet and mostly segregated at the interface of Nd2 Fe14 B and grain boundary phases covering Nd2 Fe14 B grains so that the core-shell type structures were developed. The formation of highly anisotropic (Nd, Dy)2Fe14B phase layer, which acted as the shell in the core-shell type structure so as to prevent the reverse domain movement, was the cause of enhancing the coercivity of diffusion treated NdFeB magnets. Segregation of cobalt in Nd-rich TJP followed by the formation of Co-rich phase was beneficial for the coercivity enhancement, resulting in the stabilization of the metastable c-Nd2O3 phase.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1263-1266
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure Evolution of Ni-Based ODS Superalloy Powders During Horizontal Rotary Ball Milling
Autorzy:
Lee, H.-E.
Kim, Y. S.
Park, J. K.
Oh, S.-T.
Powiązania:
https://bibliotekanauki.pl/articles/355552.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high energy ball milling
Ni-base ODS superalloy
particle and crystalline size
microstructure
Opis:
Microstructure evolution of Ni-based oxide dispersion-strengthened alloy powders with milling time is investigated. The elemental powders having a nominal composition of Ni-15Cr-4.5Al-4W-2.5Ti-2Mo-2Ta-0.15Zr-1.1Y2O3 in wt % were ball-milled by using horizontal rotary ball milling with the change of milling velocity. Microstructure observation revealed that large aggregates were formed in the early stages of ball milling, and further milling to 5 h decreased particle size. The average crystalline size, estimated by the peak broadening of XRD, decreased from 28 nm to 15 nm with increasing milling time from 1 h to 5 h. SEM and EPMA analysis showed that the main elements of Ni and Cr were homogeneously distributed inside the powders after ball milling of 5 h.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1253-1255
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Molecule dissociation at the Fe3O4 (001) surface
Autorzy:
Kim-Ngan, N.-T. H.
Jagło, D.
Sitko, D.
Soszka, W.
Powiązania:
https://bibliotekanauki.pl/articles/411955.pdf
Data publikacji:
2013
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Magnetite surface
low energy ion scattering
molecule dissociation
Opis:
The molecular dissociation at the single-crystalline Fe3O4 (001) surface has been investigated using the diatomic H+2 , D+2 and N+2 molecules in the energy range of 3�{8 keV and in the temperature range of 90 K�{300 K. The single collision of ions released from dissociation with the surface atoms was observed only for the N2+ molecules. The detail analysis confirmed that for the light molecules such as H2+ and D2+ the charge-transfer process dominate the interaction of a molecule with the magnetite surface. A large change in the scattered ion yields around the Verwey phase transition temperature was observed indicating a strong correlation between the molecule dissociation and the electronic state of the magnetite surface.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2013, 2; 1-10
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oxygen Emissions from Single-Crystalline Fe$\text{}_{3}$O$\text{}_{4}$ Surfaces Induced by Low-Energy Ion Bombardments
Autorzy:
Kim-Ngan, N.-T. H.
Soszka, W.
Powiązania:
https://bibliotekanauki.pl/articles/2046830.pdf
Data publikacji:
2006-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
68.35.-p
61.18.Bn
Opis:
Negative-charged ion energy spectra of the Fe$\text{}_{3}$O$\text{}_{4}$ (001) and (111) surface revealed large peaks attributed to the O$\text{}^{-}$ recoils from a binary collision. Under Ar$\text{}^{+}$ ion bombardments such an emission was largely affected by the screening effect of the Fe ions. A distinguished peak related to the O$\text{}^{+}$ recoil ions was observed under Ne$\text{}^{+}$ ion bombardments, while such a peak was merged into the high background in the case of Ar$\text{}^{+}$ ion ones. A weak effect from the Verwey transition was found on oxygen emissions. For the (111) surface a small peak characteristic of the O$\text{}^{+}$ recoils from double collisions appeared in the energy spectra around 140-170 K and a minimum was observed in both R$\text{}^{+}$(T) and R$\text{}^{-}$(T) curves under 6 keV Ne$\text{}^{+}$ ion beam.
Źródło:
Acta Physica Polonica A; 2006, 109, 6; 715-721
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Scanning Tunneling Spectra and Low Energy Ion Scattering Studies of the Verwey Transition in MBE Fe$\text{}_{3}$O$\text{}_{4}$ (100) Thin Film
Autorzy:
Kim-Ngan, N.-T. H.
Soszka, W.
Hietschold, M.
Powiązania:
https://bibliotekanauki.pl/articles/2024029.pdf
Data publikacji:
2001-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.16.Ch
61.18.Bn
71.30.+h
Opis:
The (100) surface of magnetite Fe$\text{}_{3}$O$\text{}_{4}$ thin film was studied by a UHV low-temperature scanning tunneling microscope and by an ion scattering spectroscopy. The tunneling spectra revealed a widening of the gap with decreasing temperature, which may be related to the metal-insulator phase transition in this material. A strong effect of this phase transition on ion scattering from such a surface was observed. The temperature dependence of the scattered ion yield, R$\text{}^{+}$(T), revealed two minima at around 100 K and at 125 K under Ne$\text{}^{+}$ bombardment with the primary energy up to 6 keV. The disappearance of the high-temperature minimum at a bombarding energy of 6.5 keV gave a further evidence for the ion velocity dependence of the character of the R$\text{}^{+}$(T) curve, which has been first observed for a MBE Fe$\text{}_{3}$O$\text{}_{4}$ (111) film surface.
Źródło:
Acta Physica Polonica A; 2001, 99, 2; 267-276
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies