Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

English (EN)·Polski (PL)·Yкраїнський (UK)
Przejdź do strony domowej biblioteki Centralna Biblioteka Wojskowa Link otwiera się w nowym oknie Logo biblioteki Prolib Integro - strona głównaCentralna Biblioteka Wojskowa

Wyszukujesz frazę "Kim, S. T." wg kryterium: Autor

  Lista filtrów
Wyrównaj
    Wyświetlanie 1-33 z 33
    Tytuł:
    An analysis on the thermal characteristics according to the viscosity of bearing lubricant and the cooling condition for the high speed motor spindle
    Autorzy:
    Choi, D. B.
    Lee, J. J.
    Kim, S. T.
    Kwon, H. D.
    Kim, C. Y.
    Powiązania:
    https://bibliotekanauki.pl/articles/1429194.pdf
    Data publikacji:
    2008
    Wydawca:
    Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
    Tematy:
    high speed motor spindle
    thermal displacement cooling condition
    lubricant viscosity
    Opis:
    Thermal displacement of the high speed machine tools has a large influence on machining accuracy. The high speed motor spindle with many heat sources is widely used for the high speed machine tools recently. The important problem in this spindle is to reduce and minimize the thermal effects by motor and bearings. This paper presents the analysis on thermal characteristics for high speed motor spindle system with oil-air lubricated angular contact ceramic ball bearings and built-in motor. An analysis on the thermal characteristics of spindle is performed according to the cooling conditions and the viscosity of bearing lubricants by using finite element method. This results can be applied to the design and manufacturing for the high speed motor spindle.
    Źródło:
    Journal of Machine Engineering; 2008, 8, 4; 88-98
    1895-7595
    2391-8071
    Pojawia się w:
    Journal of Machine Engineering
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Effect of Electroless Ni–P Plating on the Bonding Strength of Bi–Te-Based Thermoelectric Modules
    Autorzy:
    Kim, S. S.
    Son, I.
    Kim, K. T.
    Powiązania:
    https://bibliotekanauki.pl/articles/356583.pdf
    Data publikacji:
    2017
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    thermoelectric
    Ni–P plating
    bonding strength
    Bi–Te
    soldering
    Opis:
    In the present study, electroless Ni–P plating was applied to Bi–Te-based thermoelectric materials as a barrier layer and the effect of the Ni–P plating on the bonding strength of the thermoelectric module was investigated. The bonding strength of the n- and p-type modules increased after being subjected to the electroless Ni–P plating treatment. In the case of the thermoelectric module that was not subjected to electroless Ni–P plating, Sn and Te were interdiffused and formed a brittle Sn–Te-based metallic compound. The shearing mostly occurred on the bonding interface where such an intermetallic compound was formed. On the other hands, it was found from the FE-EPMA analysis of the bonding interface of thermoelectric module subjected to electroless Ni-P plating that the electroless Ni-P plating acted as an anti-diffusion layer, preventing the interdiffusion of Sn and Te. Therefore, by forming such an anti-diffusion layer on the surface of the Bi–Te based thermoelectric element, the bonding strength of the thermoelectric module could be increased.
    Źródło:
    Archives of Metallurgy and Materials; 2017, 62, 2B; 1225-1229
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    CO Oxidation Properties Of Selective Dissoluted Metallic Glass Composites
    Utlenianie wybranych rozcieńczonych kompozytów szkieł metalicznych
    Autorzy:
    Kim, S. Y.
    Lee, M. H.
    Kim, T. S.
    Kim, B. S.
    Powiązania:
    https://bibliotekanauki.pl/articles/355092.pdf
    Data publikacji:
    2015
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    CO oxidation
    metallic glasses
    porous metal
    catalyst materials
    utlenianie
    szkło metaliczne
    metale porowate
    materiał katalityczny
    Opis:
    Porous metallic materials have been widely used in many fields including aerospace, atomic energy, electro chemistry and environmental protection. Their unique structures make them very useful as lightweight structural materials, fluid filters, porous electrodes and catalyst supports. In this study, we fabricated Ni-based porous metallic glasses having uniformly dispersed micro meter pores by the sequential processes of ball-milling and chemical dissolution method. We investigated the application of our porous metal supported for Pt catalyst. The oxidation test was performed in an atmosphere of 1% CO and 3% O2. Microstructure observation was performed by using a scanning electron microscope. Oxidation properties and BET (Brunauer, Emmett, and Teller) were analyzed to understand porous structure developments. The results indicated that CO Oxidation reaction was dependent on the specific surface area.
    Źródło:
    Archives of Metallurgy and Materials; 2015, 60, 2B; 1227-1229
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Hardness and Microstructure of Mixed Al-CNF Powder Extrusion
    Autorzy:
    Kim, D.-H.
    Kim, T.-J.
    Lim, S.-G.
    Powiązania:
    https://bibliotekanauki.pl/articles/351170.pdf
    Data publikacji:
    2017
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    Al-CNF composite
    cold isotatic
    presses
    powder extrusion
    LED
    microstructure
    Opis:
    In this study, mechanical properties and microstructures of extruded aluminum matrix composites were investigated. The composite materials were manufactured by two step methods: powder metallurgy (mixture of aluminum powder and carbon fiber using a turbular mixer, pressing of mixed aluminum powder and carbon fiber using a cold isostatic pressing) and hot extrusion of pressed aluminum powder and carbon fiber. For the mixing of Al powder and carbon fibers, aluminum powder was used as a powder with an average particle size of 30 micrometer and the addition of the carbon fibers was 50% of volume. In order to make mixing easier, it was mixed under an optimal condition of turbular mixer with a rotational speed of 60 rpm and time of 1800s. The process of the hot-extrusion was heated at 450°C for 1 hour. Then, it was hot-extruded with a condition of extrusion ratio of 19 and ram speed of 2 mm/s. The microstructural analysis of extruded aluminum matrix composites bars and semi-solid casted alloys were carried out with the optical microscope, scanning electron microscope and X-ray diffraction. Its mechanical properties were evaluated by Vickers hardness and tensile test.
    Źródło:
    Archives of Metallurgy and Materials; 2017, 62, 2B; 1267-1270
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Reaction Moment at the L5/S1 Joint During Simulated Forward Slipping With a Handheld Load
    Autorzy:
    Liu, J.
    Lockhart, T.
    Kim, S.
    Powiązania:
    https://bibliotekanauki.pl/articles/89818.pdf
    Data publikacji:
    2014
    Wydawca:
    Centralny Instytut Ochrony Pracy
    Tematy:
    back injury
    load carrying
    slips and falls
    reactive recovery
    obciążenie
    plecy
    poślizg
    Opis:
    The purpose of the study was to investigate the effects of load on the net moment response at the L5/S1 joint during simulated slip events. Six young individuals were instructed to take one step with a handheld load. Sudden floor movement was randomly introduced to simulate unexpected slips. Different loads conditions (0%, 10%, 20%, 30% of body weight) were introduced at random. Three-dimensional net moments at the L5/S1 joint were computed via downward inverse dynamic model. Peak joint moment generated at 30% load level was found to be significantly higher compared to no-load condition. No peak moment differences were found among no-load, 10% or 20% load levels. Additionally, the findings from this study indicated a flexiondominant net L5/S1 joint moment pattern during motion phase associated with slip-induced falls.
    Źródło:
    International Journal of Occupational Safety and Ergonomics; 2014, 20, 3; 429-436
    1080-3548
    Pojawia się w:
    International Journal of Occupational Safety and Ergonomics
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Effect Of Carbon Nanotubes On The Properties Of Spark Plasma Sintered ZrO2/CNT Composites
    Wpływ nanorurek węglowych na właściwości spiekanych metodą sps kompozytów ZrO2/CNT
    Autorzy:
    Shim, D. H.
    Jung, S. S.
    Kim, H. S.
    Cho, H.
    Kim, J. K.
    Kim, T. G.
    Yoon, S. J.
    Powiązania:
    https://bibliotekanauki.pl/articles/351266.pdf
    Data publikacji:
    2015
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    CNT
    ZrO2
    composite
    SPS
    kompozyty
    Opis:
    Zirconia matrix ZrO2/CNT composite materials reinforced with multiwall carbon nanotubes were fabricated using a spark plasma sintering technique. The effects of the amount of CNTs addition, sintering temperature and sintering pressure on the properties of the resulting ZrO2/CNT composites were examined. 0 to 9 vol. % CNTs were dispersed in zirconia powder, and the resulting mixture was sintered. The electrical conductivity, hardness, flexural strength, and density were measured to characterize the composites. The friction and wear properties of the composites were also tested. The flexural strength and friction coefficient of the composites were improved with up to 6 vol.% of CNT addition and the flexural strength showed a close relationship with the relative density of the composite. The electrical conductivity increased with increasing proportion of the CNTs, but the efficiency was reduced at more than 6 vol.% CNTs.
    Źródło:
    Archives of Metallurgy and Materials; 2015, 60, 2B; 1315-1318
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Isotopic water separation using AGMD and VEMD
    Autorzy:
    Kim, J.
    Park, S.
    Kim, T.-S.
    Jeong, D.-Y.
    Ko, K.-H.
    Powiązania:
    https://bibliotekanauki.pl/articles/147314.pdf
    Data publikacji:
    2004
    Wydawca:
    Instytut Chemii i Techniki Jądrowej
    Tematy:
    AGMD
    VEMD
    oxygen isotopes
    PET
    FDG
    Opis:
    The 18O isotopic water permeation and separation characteristics of a hydrophobic PTFE membrane using Air Gap Membrane Distillation (AGMD) and Vacuum Enhanced Membrane Distillation (VEMD) were investigated. Permeation fluxes were measured by weighing the collected membrane-permeated water vapor. 18O/16O of each water sample was analyzed by the Tunable Diode Laser Absorption Spectroscopy (TDLAS). We observed the effects of the air filled membrane pores and the temperature gradient applied to the membrane surfaces on the vapor permeation flux and the oxygen isotope separation for the first time. For both AGMD and VEMD, the permeation flux and the degree of 18O separation increased as the membrane interfacial temperature gradient increased. Even though, oxygen isotope separation and the permeation flux for VEMD is slightly higher than AGMD, the latter may be more efficient from the system's operational point of view.
    Źródło:
    Nukleonika; 2004, 49, 4; 137-142
    0029-5922
    1508-5791
    Pojawia się w:
    Nukleonika
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Effect of Local Strain Distribution of Cold-Rolled Alloy 690 on Primary Water Stress Corrosion Crack Growth Behavior
    Autorzy:
    Kim, S.-W.
    Ahn, T.-Y.
    Lim, Y.-S.
    Hwang, S.-S.
    Powiązania:
    https://bibliotekanauki.pl/articles/354997.pdf
    Data publikacji:
    2017
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    alloy 690
    crack growth
    electron backscatter diffraction
    local strain distributions
    stress corrosion cracking
    Opis:
    This work aims to study the stress corrosion crack growth behavior of cold-rolled Alloy 690 in the primary water of a pressurized water reactor. Compared with Alloy 600, which shows typical intergranular cracking along high angle grain boundaries, the cold-rolled Alloy 690, with its heterogeneous microstructure, revealed an abnormal crack growth behavior in mixed mode, that is, in transgranular cracking near a banded region, and in intergranular cracking in a matrix region. From local strain distribution analysis based on local mis-orientation, measured along the crack path using the electron back scattered diffraction method, it was suggested that the abnormal behavior was attributable to a heterogeneity of local strain distribution. In the cold-rolled Alloy 690, the stress corrosion crack grew through a highly strained area formed by a prior cold-rolling process in a direction perpendicular to the maximum principal stress applied during a subsequent stress corrosion cracking test.
    Źródło:
    Archives of Metallurgy and Materials; 2017, 62, 2B; 1243-1248
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Fabrication of Cu-Based SiC Composites by Spark Plasma Sintering of Cu-Nitrate Coated SiC Powders
    Autorzy:
    Jeong, Y.-K.
    Kim, Y. S.
    Oh, S.-T.
    Powiązania:
    https://bibliotekanauki.pl/articles/354995.pdf
    Data publikacji:
    2017
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    Cu-SiC composite
    Cu-nitrate
    spark plasma sintering
    microstructure
    Opis:
    An optimum route to fabricate the Cu-based SiC composites with homogeneous microstructure was investigated. Three methods for developing the densified composites with sound interface between Cu and SiC were compared on the basis of the resulting microstructures. Starting with three powder mixtures of elemental Cu and SiC, elemental Cu and PCS coated SiC or PCS and Cunitrate coated SiC was used to obtain Cu-based SiC composites. SEM analysis revealed that the composite fabricated by spark plasma sintering using elemental SiC and Cu powder mixture showed inhomogeneous microstructure. Conversely, dense microstructure with sound interface was observed in the sintered composites using powder mixture of pre-coated PCS and Cu-nitrate onto SiC. The relationship between powder processing and microstructure was discussed based on the role of coating layer for the wettability.
    Źródło:
    Archives of Metallurgy and Materials; 2017, 62, 2B; 1407-1410
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Microstructure Development of Spark Plasma Sintered Ti-Nb Alloy by Heat Treatment
    Autorzy:
    Haq, M. A.
    Abbas, S. F.
    Eom, N. S. A.
    Kim, T. S.
    Lee, B.
    Park, K.-T.
    Kim, B. S.
    Powiązania:
    https://bibliotekanauki.pl/articles/355593.pdf
    Data publikacji:
    2018
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    TiNb alloy
    Spark plasma sintering
    Heat treatment
    Microstructure
    β-phase titanium
    Opis:
    The β-phase Titanium (β-Ti) alloys have been under the spotlight in the recent past for their use as biomedical prosthetic materials owing to their excellent properties such as low elastic modulus, high corrosion resistance and tensile strength. Recently, Niobium (Nb) has gained a lot of attention as a β-phase stabilizing element in Ti alloys to replace Vanadium (V) due to its excellent solubility in Ti, low elastic modulus and biocompatibility. In this work, low cost Ti-20Nb binary alloy has been fabricated via powder metallurgy procedures. The blended powder mixtures of Ti and Nb were sintered at 900°C for 20 mins by the Spark Plasma Sintering (SPS) with an applied uniaxial pressure of 40 MPa. The heating rate was fixed at 50°C/min. The sintered alloy was subject to heat treatments at 1200°C in vacuum condition for various time durations. The characterizations of microstructure obtained during this process were done using FE-SEM, EDS and XRD. By increasing heat treatment time, as understood, the volume of residual Nb particles was decreased resulting in accelerated diffusion of Nb into Ti. Micro hardness of the alloy increased from 340 to 355 HV with the increase in β phase content from 30 to 45%. The resultant alloys had relatively high densities and homogenized microstructures of dispersed lamellar β grains in α matrix.
    Źródło:
    Archives of Metallurgy and Materials; 2018, 63, 3; 1429-1432
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Preparation Of Fine Grained SiC At Reduced Temperature By Two-Step Sintering
    Wytwarzanie drobnoziarnistego SiC w obniżonej temperaturze przez dwuetapowe spiekanie
    Autorzy:
    Kim, K.-W.
    Oh, K.-S.
    Lee, H.
    Kim, B. S.
    Chung, T.-J.
    Powiązania:
    https://bibliotekanauki.pl/articles/353772.pdf
    Data publikacji:
    2015
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    SiC
    liquid phase
    two step sintering
    coarsening
    hardness
    faza ciekła
    spiekanie dwuetapowe
    odporność
    twardość
    Opis:
    Two-step sintering route was applied for the densification SiC by promoting the role of liquid phase. The specimen contained 8 vol% of liquid phase composed of Al2O3 and Y2O3. The heating schedule consisted with initial rapid heating to 2000°C and immediate quenching to 1700 or 1750°C. By heating at elevated temperature, even distribution of the liquid phase was intended. The heat treatment at reduced temperature was to suppress the evaporative loss of the liquid and to secure the time for densification. The two-step sintering effectively suppressed loss of mass and coarsening. The resultant SiC was thus dense and was composed of fine grains exhibiting hardness of 2321 kgf/mm2.
    Źródło:
    Archives of Metallurgy and Materials; 2015, 60, 2B; 1539-1542
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Long-term effect of niclosamide on inhibition of bacterial leaf blight in rice
    Autorzy:
    Kim, S.-I.
    Kwak, J.S.
    Song, J.T.
    Seo, H.S.
    Powiązania:
    https://bibliotekanauki.pl/articles/65390.pdf
    Data publikacji:
    2016
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    long-term effect
    niclosamide
    niclocide zob.niclosamide
    inhibition
    bacterial disease
    leaf disease
    rice
    bacterial blight disease
    Xanthomonas oryzae pv.oryzae
    Opis:
    Bacterial leaf blight is one of the major diseases in rice and affects yields. Thus, various methods have been applied to protect rice from this disease. Here, we show systemic translocation of the human drug niclosamide (5-chloro-N-(2-chloro-4-nitrophenyl)- 2-hydroxybenzamide) in rice and its long-term effect on prevention of rice leaf blight. The development of Xanthomonas oryzae pv. oryzae-induced rice leaf blight was effectively inhibited in untreated systemic leaves as in niclosamide-treated leaves, although its effect gradually decreased in a time-dependent manner. Time-course examination after niclosamide treatment showed that the niclosamide level was highest after 3 h in non-treated distal leaves, suggesting fast systemic movement of niclosamide from the treated local site to untreated distal regions. Our data indicate that niclosamide controls rice leaf blight by its rapid systemic movement and that its effect is maintained for a long time.
    Źródło:
    Journal of Plant Protection Research; 2016, 56, 4
    1427-4345
    Pojawia się w:
    Journal of Plant Protection Research
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Recovery Of Valuable Metals In Tin-Based Anodic Slimes By Carbothermic Reaction
    Odzysk cennych metali ze szlamów anodowych na bazie Sn metodą reakcji karbotermicznej
    Autorzy:
    Han, C.
    Kim, Y.-M.
    Son, S. H.
    Choi, H.
    Kim, T. B.
    Kim, Y. H.
    Powiązania:
    https://bibliotekanauki.pl/articles/352796.pdf
    Data publikacji:
    2015
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    tin
    anodic slime
    carbothermic reduction
    carbon
    recovery
    cyna
    szlam anodowy
    reakcja karbotermiczna
    węgiel
    odzysk metali
    Opis:
    This study investigated the recovery of anodic slimes by carbothermic reaction in the temperature range of 973~1,273K and amount of carbon as a function of time. Tin anodic slime samples were collected from the bottom of the electrolytic cells during the electro-refining of tin. The anodic slimes are consisted of high concentrated tin, silver, copper and lead oxides. The kinetics of reduction were determined by means of the weight-loss measurement technique. In order to understand in detail of carbothermic reaction, thermodynamic calculation was carried out and compared with experiments. From thermodynamic calculation and experiment, it was confirmed that Sn-based anodic slime could be reduced by controlling temperature and amount of carbon. However, any tendency between the reduction temperature and carbon content for the reduction reaction was not observed.
    Źródło:
    Archives of Metallurgy and Materials; 2015, 60, 2B; 1213-1216
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Fabrication and Characterization of CoCrFeNiMn High Entropy Alloy Powder Processed by Gas Atomization
    Autorzy:
    Park, T. G.
    Lee, S. H.
    Lee, B.
    Cho, H. M.
    Choi, W. J.
    Kim, B. S.
    Shin, K. S.
    Kim, T.-S.
    Powiązania:
    https://bibliotekanauki.pl/articles/353649.pdf
    Data publikacji:
    2018
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    high entropy alloy
    gas atomization
    spark plasma sintering
    CoCrFeNiMn
    Opis:
    In this study, precisely controlled large scale gas atomization process was applied to produce spherical and uniform shaped high entropy alloy powder. The gas atomization process was carried out to fabricate CoCrFeNiMn alloy, which was studied for high ductility and mechanical properties at low temperatures. It was confirmed that the mass scale, single phase, equiatomic, and high purity spherical high entropy alloy powder was produced by gas atomization process. The powder was sintered by spark plasma sintering process with various sintering conditions, and mechanical properties were characterized. Through this research, we have developed a mass production process of high quality and spherical high entropy alloy powder, and it is expected to expand applications of this high entropy alloy into fields such as powder injection molding and 3D printing for complex shaped components.
    Źródło:
    Archives of Metallurgy and Materials; 2018, 63, 2; 1055-1059
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Effect Of DyMn Alloy-Powder Addition On Microstructure And Magnetic Properties Of NdFeB Sintered Magnets
    Wpływ dodatku proszku DyMn na mikrostrukturę i właściwości magnetyczne spiekanych magnesów NdFeB
    Autorzy:
    Lee, M.-W.
    Dhakal, D. R.
    Kim, T. H.
    Lee, S. R.
    Kim, H. J.
    Jang, T. S.
    Powiązania:
    https://bibliotekanauki.pl/articles/357010.pdf
    Data publikacji:
    2015
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    Nd-Fe-B sintered magnets
    DyMn-alloy powder
    coercivity
    low melting point element
    magnesy spiekane
    proszek DyMn
    koercja
    elementy o niskiej temperaturze topnienia
    Opis:
    Micostructural change and corresponding effect on coercivity of a NdFeB sintered magnet mixed with small amount of DyMn powder was investigated. In the sintered magnet mixed with the DyMn alloy-powder Dy-rich shell was formed at outer layer of the main grains, while Mn was mostly concentrated at Nd-rich triple junction phase (TJP), lowering melting temperature of the Nd-rich phase that eventually improved the microstructural characteristics of the gain boundary phase. The coercivity of a magnet increased more than 3.5 kOe by the mixing of the DyMn alloy-powder.
    Źródło:
    Archives of Metallurgy and Materials; 2015, 60, 2B; 1407-1409
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Effect Of Different Mechanical Milling Processes On Morphology And Microstructural Changes Of Nano And Micron Al-Powders
    Wpływ różnych procesów mielenia na morfologię i mikrostrukturę nanometrycznych i mikronowych proszków Al
    Autorzy:
    Kim, H.-S.
    Madavali, B.
    Eom, T.-J.
    Kim, C.- M.
    Koo, J.-M.
    Lee, T. H.
    Hong, S.-J.
    Powiązania:
    https://bibliotekanauki.pl/articles/355715.pdf
    Data publikacji:
    2015
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    Al alloys
    high-energy ball milling
    low energy ball milling
    plastic deformation
    stopy Al
    wysokoenergetyczne mielenie kulkowe
    mielenie energooszczędne
    odkształcenia plastyczne
    Opis:
    In this research, effect of the various mechanical milling process on morphology and microstructural changes of nano and micron Al-powders was studied. The milling of Al-powders was performed by both high energy and low energy ball milling process. The influence of milling (pulverizing) energy on the structural changes of Al-powders was studied. Al-nanoparticles were agglomerated during the MA and its size was increased with increasing milling while micron Al-powder gets flattened shape during high energy ball milling due to severe plastic deformation. Meanwhile, structural evolution during high energy ball milling of the nano powder occurred faster than that of the micron powder. A slight shift in the position of X-ray diffraction peaks was observed in nano Al-powders but it was un-altered in macro Al-powders. The variation in lattice parameters was observed only for nano Al powders during the high energy ball milling due to lattice distortion.
    Źródło:
    Archives of Metallurgy and Materials; 2015, 60, 2B; 1235-1239
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Photodynamic therapy of red and blue lights on Malassezia pachydermatis: an in vitro study
    Autorzy:
    Kim, W.R.
    Bae, S.G.
    Oh, T.H.
    Powiązania:
    https://bibliotekanauki.pl/articles/2087782.pdf
    Data publikacji:
    2018
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    dog
    LEDs
    PDT
    Malassezia infection
    Źródło:
    Polish Journal of Veterinary Sciences; 2018, 21, 1; 185-191
    1505-1773
    Pojawia się w:
    Polish Journal of Veterinary Sciences
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Sintering and Microstructures of SUS 316L Powder Produced by 3D Printing Process
    Autorzy:
    Kim, W. J.
    Nguyen, H.-H.
    Kim, H. Y.
    Nguyen, M.-T.
    Park, H. S.
    Kim, J.-C.
    Powiązania:
    https://bibliotekanauki.pl/articles/356018.pdf
    Data publikacji:
    2017
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    stainless steel
    3D printing
    selective laser sintering
    SUS 316L
    flake powder
    Opis:
    Selective laser sintering (SLS) is a type of laminating sintering technique, using CO2 laser with (metal, polymer, and ceramic) powders. In this result, the flake SUS 316L was used to achieve a high porous product, and compare to spherical type. After SLS, the porosity of flake-type sample with 34% was quite higher than that of the spherical-type one that had only 11%. The surface roughness of the flake SLS sample were also investigated in both inner and surface parts. The results show that the deviation of the roughness of the surface part is about 64.40μm, while that of the internal one was about 117.65μm, which presents the containing of high porosity in the uneven surfaces. With the process using spherical powder, the sample was quite dense, however, some initial particles still remained as a result of less energy received at the beneath of the processing layer.
    Źródło:
    Archives of Metallurgy and Materials; 2017, 62, 2B; 1215-1218
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Effect of Trace Elements (Co, Cr) on the Microstructure and Physical Properties of Al-Si-Cu-Mg-Fe Extruded Alloy
    Autorzy:
    Ahn, S. S.
    Sharief, P.
    Lee, C. H.
    Son, H. T.
    Kim, Y. H.
    Kim, Y. C.
    Hong, S.
    Hong, S. J.
    Powiązania:
    https://bibliotekanauki.pl/articles/352787.pdf
    Data publikacji:
    2019
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    Al-Si alloy
    microstructure
    extrusion
    coefficient of thermal expansion
    trace elements
    Opis:
    Trace elements Co, Cr were added to investigate their influence on the microstructure and physical properties of Al-Si extruded alloy. The Co, Cr elements were randomly distributed in the matrix, forms intermetallic phase and their existence wereconfirmed by XRD, EDS and SEM analysis. With addition of trace elements, the microstructure was modified, Si particle size was reduced and the growth rate of β-(Al5 FeSi) phase limited. Compared to parent alloy, hardness and tensile strength were enhanced while the linear coefficient of thermal expansion (CTE) was significantly reduced by 42.4% and 16.05% with Co and Cr addition respectively. It is considered that the low CTE occurs with addition of Co was due to the formation of intermetallic compound having low coefficient of thermal expansion. The results suggested that Co acts as an effective element in improving the mechanical properties of Al-Si alloy.
    Źródło:
    Archives of Metallurgy and Materials; 2019, 64, 3; 857-862
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Microstructure Evolution of Ni-Based ODS Superalloy Powders During Horizontal Rotary Ball Milling
    Autorzy:
    Lee, H.-E.
    Kim, Y. S.
    Park, J. K.
    Oh, S.-T.
    Powiązania:
    https://bibliotekanauki.pl/articles/355552.pdf
    Data publikacji:
    2017
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    high energy ball milling
    Ni-base ODS superalloy
    particle and crystalline size
    microstructure
    Opis:
    Microstructure evolution of Ni-based oxide dispersion-strengthened alloy powders with milling time is investigated. The elemental powders having a nominal composition of Ni-15Cr-4.5Al-4W-2.5Ti-2Mo-2Ta-0.15Zr-1.1Y2O3 in wt % were ball-milled by using horizontal rotary ball milling with the change of milling velocity. Microstructure observation revealed that large aggregates were formed in the early stages of ball milling, and further milling to 5 h decreased particle size. The average crystalline size, estimated by the peak broadening of XRD, decreased from 28 nm to 15 nm with increasing milling time from 1 h to 5 h. SEM and EPMA analysis showed that the main elements of Ni and Cr were homogeneously distributed inside the powders after ball milling of 5 h.
    Źródło:
    Archives of Metallurgy and Materials; 2017, 62, 2B; 1253-1255
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    In vitro antibacterial effects of non-thermal atmospheric plasma irradiation on Staphylococcus pseudintermedius and Pseudomonas aeruginosa
    Autorzy:
    Bae, S.
    Lim, D.
    Kim, D.
    Jeon, J.
    Oh, T.
    Powiązania:
    https://bibliotekanauki.pl/articles/2087357.pdf
    Data publikacji:
    2020
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    antibacterial effects
    cold-atmospheric plasma
    dog
    Staphylococcus pseudinter- medius
    Pseudomonas aeruginosa
    Źródło:
    Polish Journal of Veterinary Sciences; 2020, 23, 1; 13-19
    1505-1773
    Pojawia się w:
    Polish Journal of Veterinary Sciences
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Carbon Co-Deposition During Gas Reduction of Water-Atomized Fe-Cr-Mo Powder
    Autorzy:
    Ali, B.
    Choi, S. H.
    Seo, S. J.
    Maeng, D. Y.
    Lee, C. G.
    Kim, T. S.
    Park, K. T.
    Powiązania:
    https://bibliotekanauki.pl/articles/352709.pdf
    Data publikacji:
    2017
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    water atomization
    Fe-based powder
    oxide reduction
    powder metallurgy
    sinter-hardening alloys
    Opis:
    The water atomization of iron powder with a composition of Fe-3Cr-0.5Mo (wt.%) at 1600°C and 150 bar creates an oxide layer, which in this study was reduced using a mixture of methane (CH4) and argon (Ar) gas. The lowest oxygen content was achieved with a 100 cc/min flow rate of CH4, but this also resulted in a co-deposition of carbon due to the cracking of CH4. This carbon can be used directly to create high-quality, sinter hardenable steel, thereby eliminating the need for an additional mixing step prior to sintering. An exponential relationship was found to exist between the CH4 gas flow rate and carbon content of the powder, meaning that its composition can be easily controlled to suit a variety of different applications.
    Źródło:
    Archives of Metallurgy and Materials; 2017, 62, 2B; 1119-1124
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Microstructure and Magnetic Properties of NdFeB Sintered Magnets Diffusion-Treated with Cu/Al Mixed Dyco Alloy-Powder
    Autorzy:
    Lee, M.-W.
    Bae, K.-H.
    Lee, S.-R.
    Kim, H.-J.
    Jang, T.-S.
    Powiązania:
    https://bibliotekanauki.pl/articles/353351.pdf
    Data publikacji:
    2017
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    Nd-Fe-B sintered magnets
    grain boundary diffusion process
    low melting point element
    DyCo alloy-powder diffusion
    Opis:
    We investigated the microstructural and magnetic property changes of DyCo, Cu + DyCo, and Al + DyCo diffusion-treated NdFeB sintered magnets. The coercivity of all diffusion treated magnet was increased at 880ºC of 1st post annealing(PA), by 6.1 kOe in Cu and 7.0 kOe in Al mixed DyCo coated magnets, whereas this increment was found to be relatively low (3.9 kOe) in the magnet coated with DyCo only. The diffusivity and diffusion depth of Dy were increased in those magnets which were treated with Cu or Al mixed DyCo, mainly due to comparatively easy diffusion path provided by Cu and Al because of their solubility with Ndrich grain boundary phase. The formation of Cu/Al-rich grain boundary phase might have enhanced the diffusivity of Dy-atoms. Moreover, relatively a large number of Dy atoms reached into the magnet and mostly segregated at the interface of Nd2 Fe14 B and grain boundary phases covering Nd2 Fe14 B grains so that the core-shell type structures were developed. The formation of highly anisotropic (Nd, Dy)2Fe14B phase layer, which acted as the shell in the core-shell type structure so as to prevent the reverse domain movement, was the cause of enhancing the coercivity of diffusion treated NdFeB magnets. Segregation of cobalt in Nd-rich TJP followed by the formation of Co-rich phase was beneficial for the coercivity enhancement, resulting in the stabilization of the metastable c-Nd2O3 phase.
    Źródło:
    Archives of Metallurgy and Materials; 2017, 62, 2B; 1263-1266
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Fabrication Of Porous Ti By Thermal Decomposition And Sintering Of PMMA/TiH2 Powder Compact
    Wytwarzanie porowatego tytanu przez rozkład termiczny i spiekanie wyprasek PMMA/TiH2
    Autorzy:
    Jeon, K. Ch.
    Kim, Y. D.
    Suk, M.-J.
    Oh, S.-T.
    Powiązania:
    https://bibliotekanauki.pl/articles/352341.pdf
    Data publikacji:
    2015
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    porous Ti
    PMMA powders
    thermal decomposition of TiH2
    pore structure
    porowaty tytan
    PMMA
    rozkład termiczny
    struktura porów
    Opis:
    Porous Ti with controlled pore structure was fabricated by thermal decomposition and sintering process using TiH2 powders and Polymethylmethacrylates (PMMA) beads as pore forming agent. The beads sizes of 8 and 50 μm were used as a template for fabricating the porous Ti. The TiH2 powder compacts with 20 and 70 vol% PMMA were prepared by uniaxial pressing and sintered for 2 h at 1100°C. TGA analysis revealed that the PMMA and TiH2 were thermally decomposed at about 400°C forming pores and at about 600°C into metallic Ti phase. The porosity increased with increase in the amount of PMMA addition. Also, the microstructure observation showed that the pore size and shape were strongly dependent on the PMMA shapes.
    Źródło:
    Archives of Metallurgy and Materials; 2015, 60, 2B; 1375-1377
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Characterization of Cu and Ni Nano-Fluids Synthesized by Pulsed Wire Evaporation Method
    Autorzy:
    Kim, H.-S.
    Yilmaz, F.
    Dharmaiah, P.
    Lee, D.-J
    Lee, T.-H.
    Hong, S.-J.
    Powiązania:
    https://bibliotekanauki.pl/articles/356475.pdf
    Data publikacji:
    2017
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    pulsed wire evaporation
    nanofluid
    Cu
    Ni
    suspension stability
    dispersibility
    Opis:
    In the present work, Cu and Ni nanofluids were synthesized using the pulsed wire evaporation (PWE) method in the different aqueous medias, namely (ethanol and ethylene glycol), and the effects of the aqueous media on the dispersion state, stability, and particle size of nanoparticles were studied. The size and morphology of synthesized nano-particles were investigated by transmission electron microscopy (TEM). Also, the dispersion stability of the nanofluids was evaluated by turbiscan analysis. The TEM results showed that the nano-particles were spherical in shape, and the average particle size was below 100 nm. The average particle size of the Cu nano-particles was smaller than that of Ni, which was attributed to a difference in the specific sublimation energy of the elements. Moreover, ethylene glycol (EG) exhibited higher suspension stability than ethanol. Finally, the dispersion stability of Cu@EG displayed the highest value due to lower particle size and greater viscosity.
    Źródło:
    Archives of Metallurgy and Materials; 2017, 62, 2B; 999-1004
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Comparison of body surface area-based and weight-based dosing format for oral prednisolone administration in small and large-breed dogs
    Autorzy:
    Nam, A.
    Kim, S.M.
    Jeong, J.W.
    Song, K.H.
    Koo, T.S.
    Seo, K.W.
    Powiązania:
    https://bibliotekanauki.pl/articles/2087897.pdf
    Data publikacji:
    2017
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Źródło:
    Polish Journal of Veterinary Sciences; 2017, 3; 611-613
    1505-1773
    Pojawia się w:
    Polish Journal of Veterinary Sciences
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Robust Identification Approach to Individualized Anemia Model
    Autorzy:
    Akabua, E.
    Inanc, T.
    Gaweda, A.
    Brier, M. E.
    Kim, S.
    Zurada, J. M.
    Powiązania:
    https://bibliotekanauki.pl/articles/108768.pdf
    Data publikacji:
    2011
    Wydawca:
    Społeczna Akademia Nauk w Łodzi
    Tematy:
    hemoglobin
    robust identification
    Carathéodory-Fejér problem
    erythropoeitin
    anemia management
    Opis:
    Over ninety percent of End Stage Renal Disease (ESRD) patients suffer from anemia due to insufficient endogenous production of human erythropoietin. Until the advent of Recombinant Human Erythropoietin (r-HuEPO) over 30 years ago, patients with ESRD were treated mainly with multiple blood transfusions. The high cost of r-HuEPO in addition to the narrow margin between an effective do-sage and toxicity in drug administration calls for optimal dosage strategy capable of minimizing cost and toxicity while at the same time achieving the desired do-sage outcome. It is well known from control theory that a controller can be de-signed for any plant provided there is readily available a valid model for such a plant. We present Robust Identification procedure, a dimensionality reduction technique capable of capturing the inherent dynamics of anemia patients; conse-quently producing individualized model suitable for robust control synthesis and any other controller design methodologies.
    Źródło:
    Journal of Applied Computer Science Methods; 2011, 3 No. 2; 65-75
    1689-9636
    Pojawia się w:
    Journal of Applied Computer Science Methods
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Correlation Between Superheated Liquid Fragility And Onset Temperature Of Crystallization For Al-Based Amorphous Alloys
    Korelacja między krytycznymi parametrami cieczy i temperaturą początku krystalizacji dla amorficznych stopów na bazie Al
    Autorzy:
    Guo, J.
    Hu, X.
    Liu, J.
    Feng, T.
    Yoon, E. Y.
    Kim, H. S.
    Powiązania:
    https://bibliotekanauki.pl/articles/353707.pdf
    Data publikacji:
    2015
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    superheated liquid fragility
    onset temperature of crystallization
    thermal stability
    krytyczny parametr cieczy
    temperatura początku krystalizacji
    stabilność termiczna
    Opis:
    Amorphous alloys or metallic glasses have attracted significant interest in the materials science and engineering communities due to their unique physical, mechanical, and chemical properties. The viscous flow of amorphous alloys exhibiting high strain rate sensitivity and homogeneous deformation is considered to be an important characteristic in thermoplastic forming processes performed within the supercooled liquid region because it allows superplastic-like deformation behavior. Here, the correlation between the superheated liquid fragility, and the onset temperature of crystallization for Al-based alloys, is investigated. The activation energy for viscous flow of the liquid is also investigated. There is a negative correlation between the parameter of superheated liquid fragility and the onset temperature of crystallization in the same Al-based alloy system. The activation energy decreases as the onset temperature of crystallization increases. This indicates that the stability of a superheated liquid can affect the thermal stability of the amorphous alloy. It also means that a liquid with a large superheated liquid fragility, when rapidly solidified, forms an amorphous alloy with a low thermal stability.
    Źródło:
    Archives of Metallurgy and Materials; 2015, 60, 2B; 1543-1546
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Reaction Kinetics and Morphological Study of TiNb2O7 Synthesized by Solid-State Reaction
    Autorzy:
    Choi, S. H.
    Ali, B.
    Choi, K. S.
    Hyun, S. K.
    Sim, J. J.
    Choi, W. J.
    Joo, W.
    Lim, J. H.
    Lee, T. H.
    Kim, T. S.
    Park, K. T.
    Powiązania:
    https://bibliotekanauki.pl/articles/355326.pdf
    Data publikacji:
    2017
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    solid state reaction
    kinetic analysis
    quantitative phase analysis
    TiNb2O7 synthesis
    Opis:
    Although TiNb2O7 is regarded as a material with high application potential in lithium-ion batteries (LIBs) and solid-oxide fuel cells (SOFCs), it has been difficult to find suitable cost-effective conditions for synthesizing it on a commercial scale. In this study, TiNb2O7 compounds were synthesized by a solid state synthesis process. For stoichiometrically precise synthesis of the TiNb2O7 phase, the starting materials, TiO2 and Nb2O5 were taken in a 1:1 molar ratio. Activation energy and reaction kinetics of the system were investigated at various synthesis temperatures (800,1000,1200, and 1400°C) and for various holding durations (1,5,10, and 20 h). Furthermore, change in the product morphology and particle size distribution were also evaluated as a function of synthesis temperature and duration. Additionally, quantitative phase analysis was conducted using the Rietveld refinement method. It was found that increases in the synthesis temperature and holding time lead to increase in the mean particle size from 1 to 4.5 μm. The reaction rate constant for the synthesis reaction was also calculated.
    Źródło:
    Archives of Metallurgy and Materials; 2017, 62, 2B; 1051-1056
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Fabrication of a Spherical Titanium Powder by Combined Combustion Synthesis and DC Plasma Treatment
    Autorzy:
    Choi, S. H.
    Ali, B.
    Hyun, S. K.
    Sim, J. J.
    Choi, W. J.
    Joo, W.
    Lim, J. H.
    Lee, Y. J.
    Kim, T. S.
    Park, K. T.
    Powiązania:
    https://bibliotekanauki.pl/articles/356067.pdf
    Data publikacji:
    2017
    Wydawca:
    Polska Akademia Nauk. Czytelnia Czasopism PAN
    Tematy:
    combustion synthesis
    DC plasma treatment
    titanium powder
    3D printing process
    combustion parameters
    Opis:
    Combustion synthesis is capable of producing many types of refractory and ceramic materials, as well as metals, with a relatively lower cost and shorter time frame than other solid state synthetic techniques. TiO2 with Mg as reductant were dry mixed and hand compacted into a 60 mm diameter mold and then combusted under an Ar atmosphere. Depending on the reaction parameters (Mg concentration 2 ≤ α ≤ 4), the thermocouples registered temperatures between 1160°C and 1710°C . 3 mol of Mg gave the optimum results with combustion temperature (Tc) and combustion velocity (Uc) values of 1372°C and 0.26 cm/s respectively. Furthermore, this ratio also had the lowest oxygen concentration in this study (0.8 wt%). After combustion, DC plasma treatment was carried out to spheroidize the Ti powder for use in 3D printing. The characterization of the final product was performed using X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, and N/O analysis.
    Źródło:
    Archives of Metallurgy and Materials; 2017, 62, 2B; 1057-1062
    1733-3490
    Pojawia się w:
    Archives of Metallurgy and Materials
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
    Tytuł:
    Study of Ti, V and Their Oxides-Based Thin Films in the Search for Hydrogen Storage Materials
    Autorzy:
    Tarnawski, Z.
    Zakrzewska, K.
    Kim-Ngan, N.-T.
    Krupska, M.
    Sowa, S.
    Drogowska, K.
    Havela, L.
    Balogh, A.
    Powiązania:
    https://bibliotekanauki.pl/articles/1401913.pdf
    Data publikacji:
    2015-09
    Wydawca:
    Polska Akademia Nauk. Instytut Fizyki PAN
    Tematy:
    81.15.Cd
    68.49.-h
    61.05.C-
    68.60.-p
    Opis:
    Thin film series consisting of Ti, V, TiO₂ and V₂O₅ layer with different layer geometries, sequences and thicknesses have been prepared by the sputtering technique. The hydrogen depth profile of selected films upon hydrogen charging at 1 bar and/or hydrogenation at pressure up to 102 bar was determined by using secondary ion mass spectrometry and nuclear reaction analysis using a N-15 beam. The highest hydrogen storage with a concentration up to 50 at.% was found in the pure Ti and Ti-contained layer, while it amounts to around 30% in the metallic Ti-V-Ni layer. Hydrogen can diffuse through the TiO₂ layer without accumulation, but can be stored in the VO₂ layer in some cases. Hydrogen can remove the preferential Ti orientation in the films and induce a complete transition of V₂O₅ into VO₂ in the films.
    Źródło:
    Acta Physica Polonica A; 2015, 128, 3; 431-439
    0587-4246
    1898-794X
    Pojawia się w:
    Acta Physica Polonica A
    Dostawca treści:
    Biblioteka Nauki
    Artykuł
      Wyświetlanie 1-33 z 33

      Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies