Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kim, S. S." wg kryterium: Autor


Tytuł:
A Bayesian virtual metrology for quality inspection of mobile repeater systems
Autorzy:
Kim, S. D.
Kim, J. S.
Mun, B. M.
Bae, S. J.
Powiązania:
https://bibliotekanauki.pl/articles/406820.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Bayesian approach
regression
conjugate priors
ICS repeater
Markov chain Monte Carlo
Opis:
The technology of wideband code division multiple access (WCDMA) has been applied to band selective interference cancellation system (ICS) repeaters. To inspect the telecommunication quality of the systems, quality engineers must check the shape of the signals at the corresponding frequency band of the repeaters. However, measuring the signal quality is a repetitive manual task which requires much inspection time and high costs. In the case of small-sized samples, such as the example of an ICS repeater system, Bayesian approaches have been employed to improve the estimation accuracy by incorporating prior information on the parameters of the model in consideration. This research proposes a virtual method of quality inspection for products using a correlation structure of measurement data, mainly in a Bayesian regression framework. The Bayesian regression model derives prior information from historical measurement data to predict measurements of other frequency bandwidths by exploiting the correlation structure of each measurement data. Empirical results show the potential for reducing inspection costs and time by predicting the values of adjoining frequency bandwidths through measured data of a frequency bandwidth in the course of quality inspections of ICS repeater systems.
Źródło:
Management and Production Engineering Review; 2016, 7, 4; 48-53
2080-8208
2082-1344
Pojawia się w:
Management and Production Engineering Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A contemplation on the secondary origin of green algal and plant plastids
Autorzy:
Kim, E.
Maruyama, S.
Powiązania:
https://bibliotekanauki.pl/articles/59379.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Botaniczne
Tematy:
Archaeplastida
Chloroplastida
glaucophyte
green alga
plant plastid
plastid
primary plastid
red alga
secondary plastid
Viridiplantae
Opis:
A single origin of plastids and the monophyly of three “primary” plastid-containing groups – the Chloroplastida (or Viridiplantae; green algae+land plants), Rhodophyta, and Glaucophyta – are widely accepted, mainstream hypotheses that form the basis for many comparative evolutionary studies. This “Archaeplastida” hypothesis, however, thus far has not been unambiguously confirmed by phylogenetic studies based on nucleocytoplasmic markers. In view of this as well as other lines of evidence, we suggest the testing of an alternate hypothesis that plastids of the Chloroplastida are of secondary origin. The new hypothesis is in agreement with, or perhaps better explains, existing data, including both the plastidal and nucleocytoplasmic characteristics of the Chloroplastida in comparison to those of other groups.
Źródło:
Acta Societatis Botanicorum Poloniae; 2014, 83, 4
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Study On The Metal Carbide Composite Diffusion Bonding For Mechanical Seal
Badanie łączenia dyfuzyjnego kompozytu metal węglik na mechaniczne uszczelnienie
Autorzy:
Kim, D.-K.
Shon, I.-J.
Song, J.
Ryu, W.-J.
Shin, H.-Ch.
Kwon, E.-Y.
Shin, H.
Kang, S.-J.
Powiązania:
https://bibliotekanauki.pl/articles/356399.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
diffusion bonding
nanostructures
mechanical seal
hard metal
mechanical properties
łączenie
nanostruktura
uszczelnienie mechaniczne
twardy metal
właściwości mechaniczne
Opis:
Mechanical Seal use highly efficient alternative water having a great quantity of an aqueous solution and has an advantage no corrosion brine. Metal Carbide composites have been investigated as potential materials for high temperature structural applications and for application in the processing industry. The existing Mechanical seal material is a highly expensive carbide alloy, and it is difficult to take a price advantage. Therefore the study of replacing body area with inexpensive steel material excluding O-ring and contact area which demands high characteristics is needed. The development of WC-Ni base carbide alloy optimal bonding composition technique was accomplished in this study. To check out the influence of bonding temperature and time, bonding characteristics of sintering temperature was experimented. The bonding statuses of this test specimen were excellent. The hardness of specimen and bonding rate were measured using ultrasound equipment. In this work, Powder of WC (involved VC, Cr), Co and Mo2C mixed by attrition milling for 24hours. Nanostructured WC-27.6wt.%Ni-1.5wt.%Si-0.11wt.%VC-1.1wt.%B4C composite were fabricated at 1190°C by high temperature vacuum furnace. To check out the influence of bonding temperature and time, bonding characteristics of sintering temperature was experimented. Its relative density was about 99.7%. The mechanical properties (hardness and fracture toughness) were 87.2 HRA and 4.2 M·Pam1/2, respectively. The bonding status of this test specimen was excellent and the thickness of bonding layer was 20 ~30§ at 1050 and 1060°C bonding temperature.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1479-1483
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Systematic Procedure for Modeling Usability Based on Product Design Variables: A Case Study in Audiovisual Consumer Electronic Products
Autorzy:
Kim, K.-J.
Han, S. H.
Yun, M. H.
Kwahk, J.
Powiązania:
https://bibliotekanauki.pl/articles/90811.pdf
Data publikacji:
2002
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
usability evaluation
human interface elements
consumer electronic products
produkty przemysłowe
ocena zgodności wyrobów
ocena użyteczności
produkty elektroniczne
Opis:
A systematic modeling approach to describing, prescribing, and predicting usability of a product has been presented. Given the evaluation results of the usability dimension (UD) and the measurement of the product’s design variables, referred to as the human interface elements (HIEs), the approach enables one to systematically assess the relationship between the UD and HIEs. The assessed relationship is called a usability model. Once built, such a usability model can relate, in a quantitative manner, the HIEs directly to the UDs, and thus can serve as an effective aid to designers by evaluating and predicting the usability of an existing or hypothetical product. A usability model for elegance of audiovisual consumer electronic products has been demonstrated.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2002, 8, 3; 387-406
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Allometric scaling of marbofloxacin pharmacokinetics: a retrospective analysis
Autorzy:
Yohannes, S.
Hossain, M.A.
Kim, J.Y.
Lee, S.J.
Kwak, D.M.
Suh, J.W.
Park, S.C.
Powiązania:
https://bibliotekanauki.pl/articles/31939.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
The association between physiologically dependent pharmacokinetic parameters (CLB, T1/2β, Vdss) of marbofloxacin and body weight was studied in eight animal species based on allometric equation Y = aWb, where ‘Y’ is the pharmacokinetic parameter, ‘W’ is body weight, ‘a’ is allometric coefficient (intercept) and ‘b’ is the exponent that describes relation between pharmacokinetic parameter and body weight. The body clearance of marbofloxacin has shown significant (P<0.0001) relation with size (Bwt) in various animal species. However, half-life and volume of distribution were not in association with body weight. Although half-life and volume of distribution were not in a good correlation with body weight, statistically significant association between the body clearance and body weight suggests validity of allometric scaling for predicting pharmacokinetic parameters of marbofloxacin in animal species that have not been studied yet. However further study considering large sample size and other parameters influencing pharmacokinetics of marbofloxacin is recommended.
Źródło:
Polish Journal of Veterinary Sciences; 2014, 17, 1
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Amorphous 5f Ferromagnetic Hydrides $UH_{3}Mo_{x}$
Autorzy:
Tkach, I.
Kim-Ngan, N.
Maškova, S.
Andreev, A.
Matěj, Z.
Havela, L.
Powiązania:
https://bibliotekanauki.pl/articles/1369135.pdf
Data publikacji:
2014-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.50.Kj
75.50.Vv
72.15.Cz
Opis:
γ-U metal, stabilized down to room temperature in the bcc structure by Mo doping, can absorb hydrogen at high $H_{2}$ pressures only. The product is amorphous hydride $UH_{3}Mo_{x}$ analogous to $β-UH_{3}$. Such hydrides are ferromagnetic with high Curie temperatures (up to 200 K), enhanced with respect to $β-UH_{3}$. Magnetic moment of U also increases. Large disorder together with high anisotropy lead to a very high coercivity, reaching 4 T at low temperatures. As amorphization normally tends to suppress magnetic ordering of U compounds, such hydrides represent a new class of materials, amorphous U-based ferromagnets with relatively high Curie temperature.
Źródło:
Acta Physica Polonica A; 2014, 126, 1; 292-293
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An analysis on the thermal characteristics according to the viscosity of bearing lubricant and the cooling condition for the high speed motor spindle
Autorzy:
Choi, D. B.
Lee, J. J.
Kim, S. T.
Kwon, H. D.
Kim, C. Y.
Powiązania:
https://bibliotekanauki.pl/articles/1429194.pdf
Data publikacji:
2008
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
high speed motor spindle
thermal displacement cooling condition
lubricant viscosity
Opis:
Thermal displacement of the high speed machine tools has a large influence on machining accuracy. The high speed motor spindle with many heat sources is widely used for the high speed machine tools recently. The important problem in this spindle is to reduce and minimize the thermal effects by motor and bearings. This paper presents the analysis on thermal characteristics for high speed motor spindle system with oil-air lubricated angular contact ceramic ball bearings and built-in motor. An analysis on the thermal characteristics of spindle is performed according to the cooling conditions and the viscosity of bearing lubricants by using finite element method. This results can be applied to the design and manufacturing for the high speed motor spindle.
Źródło:
Journal of Machine Engineering; 2008, 8, 4; 88-98
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An integrated framework for various operation plans in container terminals
Autorzy:
Won, S. H.
Kim, K. H.
Powiązania:
https://bibliotekanauki.pl/articles/258792.pdf
Data publikacji:
2009
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
container terminals
planning
resource capacity
Opis:
This study provides a framework for integrating various planning activities in container terminals. First, we introduce various planning activities in container terminals and identify decision-making problems for each planning activity. Input parameters, decision variables, objectives, constraints, time buckets, and the planning horizon for each decision activity are identified. Next, we introduce the concept of a resource profile and planning procedure simultaneously by considering availabilities of various resources and resource requirements in a planning activity.
Źródło:
Polish Maritime Research; 2009, 3; 51-61
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis and Optimization of Micro Speaker-Box Using a Passive Radiator in Portable Device
Autorzy:
Jiang, Y.-W.
Kwon, J.-H.
Kim, H.-K.
Hwang, S.-M.
Powiązania:
https://bibliotekanauki.pl/articles/176530.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
passive radiator
speaker box
SPL improvement
Sound Pressure Level
Opis:
With the rapid development of multimedia devices such as smart phones and tablet PCs, microspeakers have been recently increasingly used for audio equipment. Improving the acoustic performance of a microspeaker is always a main concern, especially in the low frequency range. To avoid sound cancelation, a microspeaker unit is usually inserted into a speaker box. A passive radiator is also used in speaker boxes to improve the sound performance in the loudspeaker system. However, passive radiators have not been applied into microspeaker system. In this study, a speaker box with a passive radiator was analyzed and optimized to achieve a higher Sound Pressure Level (SPL) in a microspeaker system. The Finite Element Method (FEM), two-degree-of-freedom (DOF) vibration theory, and a plane circular piston sound source were used to study the electromagnetic, vibration, and acoustic characteristics, respectively. Optimization was conducted by changing the mass, stiffness, and size of the passive radiator. Based on the optimized parameters, a new sample was manufactured. The experiment results show that the SPL of the optimized speaker box with a passive radiator is improved by 5 dB at 200 Hz compared with the one without a radiator. The analysis results also matched the experiment results.
Źródło:
Archives of Acoustics; 2017, 42, 4; 753-760
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of an MMAP/PH1, PH2/N/∞ queueing system operating in a random environment
Autorzy:
Kim, C.
Dudin, A.
Dudin, S.
Dudina, O.
Powiązania:
https://bibliotekanauki.pl/articles/330607.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
random environment
marked Markovian arrival process
phase type distribution
Laplace–Stieltjes transform
rozkład fazowy
transformata Laplace'a-Stieltjesa
system operacyjny
system kolejkowy
Opis:
A multi-server queueing system with two types of customers and an infinite buffer operating in a random environment as a model of a contact center is investigated. The arrival flow of customers is described by a marked Markovian arrival process. Type 1 customers have a non-preemptive priority over type 2 customers and can leave the buffer due to a lack of service. The service times of different type customers have a phase-type distribution with different parameters. To facilitate the investigation of the system we use a generalized phase-type service time distribution. The criterion of ergodicity for a multi-dimensional Markov chain describing the behavior of the system and the algorithm for computation of its steady-state distribution are outlined. Some key performance measures are calculated. The Laplace–Stieltjes transforms of the sojourn and waiting time distributions of priority and non-priority customers are derived. A numerical example illustrating the importance of taking into account the correlation in the arrival process is presented.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2014, 24, 3; 485-501
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis Of Drilling Of A Metal Plate With Pilot Hole
Analiza wiercenia metalowej płyty z otworem pilotującym
Autorzy:
Kim, K. S.
Powiązania:
https://bibliotekanauki.pl/articles/354541.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
finite element method
drilling
pilot hole
cutting force
plastic strain
metoda elementów skończonych
wiercenie
otwór pilotujący
siła cięcia
odkształcenie plastyczne
Opis:
This paper performed a numerical analysis study of the cutting characteristics when drilling a taper hole whose upper and lower diameters are different, that is, a pilot hole. 3-dimensional drilling analysis was performed using a commercial code, and these results were used to determine analytically and compare the cutting temperature, the phenomenon of cutting chip formation, deformation and pressure, etc., for the tools, chips, and specimens during cutting. Also, cutting force and the required energy were calculated and compared. To verify the results of analysis, a cutting dynamometer was used to analyze 3-axis cutting force. Results of analysis showed that the specimen maintained a temperature of approximately 650°, with rapid cooling after chips were formed from the specimen. The tool reached a maximum of 700°, similarly to the chips. It is expected that these results will be utilized to optimize cutting processes and work conditions when drilling holes.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1307-1310
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of pier contact accident in busan new port of south Korea by System-Theoretic Accident Model and Processes (STAMP)
Autorzy:
Kim, S. R.
Wamugi, W. J.
Camliyurt, G.
Kim, D. W.
Park, Y. S.
Powiązania:
https://bibliotekanauki.pl/articles/24201437.pdf
Data publikacji:
2023
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
maritime accidents
investigation on maritime accidents
accident analysis
System-Theoretic Accident Model and Process
maritime safety
safety at sea
pilotage
lesson
Opis:
Marine accidents are caused by complex and diverse causes. Therefore, it is necessary to analyse accidents from the perspective of the whole system rather than the existing analysis models that focus on cause-effect. The STAMP analysis is a constraint-based model that focuses on improper management or enforcement of safety-related constraints in system operation. Thus, as a case study of the application of the STAMP technique in marine accident analysis, the Milano Bridge pier contact accident that occurred on April 6, 2020 in Busan New Port of South Korea was analysed by the STAMP technique in this study. Through this study, it was proposed to break away from the domestic accident investigation, which focused only on the punishment of the ship operator, and to suggest improvements that enable organizations related to the marine accidents to take initiative to take efforts for safety.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2023, 17, 2; 299--304
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis Of The Extrusion Process Of A Square Tube Multi-Channel Heat Pipe
Analiza procesu wytłaczania wielokanałowych ciepłowodów o kwadratowym przekroju
Autorzy:
Kim, K. S.
Kim, J. Y.
Powiązania:
https://bibliotekanauki.pl/articles/353935.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminum hot extrusion
FE simulation
stress analysis
extrusion experiment
aluminium wytłaczane na gorąco
symulacja FE
analiza naprężeń
wytłaczanie
Opis:
Heat pipes have been recently in use for cooling purposes in various fields, including electronic circuit boards and vehicle parts that generate large amounts of heat. In order to minimize the loss of heat transferred, there is a need to maximize the contact area of the working fluid. This study produced a square tube multi-channel heat pipe to replace the existing circular pipe type to maximize the internal surface area thereof. This expands the surface, allowing the working fluid to come into contact with a wider area and enhancing thermal radiation performance. A mold for the production for such a product was designed, and finite element simulation was performed to determine whether production is possible.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1463-1466
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of Image Processing to Predict Compressive Behavior of Aluminum Foam
Autorzy:
Kim, S.
Chung, H. J.
Rhee, K.
Powiązania:
https://bibliotekanauki.pl/articles/357032.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminum foam
compute tomography (CT) image
finite element method (FEM)
Opis:
An image processing technique was used to model the internal structure of aluminum foam in finite element analysis in order to predict the compressive behavior of the material. Finite element analysis and experimental tests were performed on aluminum foam with densities of 0.2, 0.25, and 0.3 g/cm3. It was found that although the compressive strength predicted from the finite element analysis was higher than that determined experimentally, the predicted compressive stress-strain curves exhibited a tendency similar to those determined from experiments for both densities. However, the behavior of the predicted compressive stress-strain curves was different from the experimental one as the applied strain increased. The difference between predicted and experimental stress-strain curves in a high strain range was due to contact between broken aluminum foam walls by the large deformation.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 2A; 635-640
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies