Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kim, C." wg kryterium: Autor


Tytuł:
Simulated impacts of rainfall extremes on yield responses of various barley varieties in a temperate region
Autorzy:
Yoon, C.Y.
Kim, S.
An, K.N.
Powiązania:
https://bibliotekanauki.pl/articles/2083065.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
barley
rainfall
simulation
food cost
grain
yield
Opis:
As population rises, more people need to be fed. With increasing income, the potential exists for increases in the demand for cereals (i.e., barley). Since barley has a high level of tolerance to environmental stressors, this crop has been recommended as a potential crop for food security in marginal environments. In this study, a crop growth Agricultural Land Management Alternatives with Numerical Assessment Criteria model, was parameterized and used to simulate the yields of two barley types grown in a temperate environment at a latitude of 35°N. In order to apply this crop model to barley, 19 years of field data were used to model calibration and validation. As a result, the ALMANAC model accurately simulated yields for both barley types. The validated model was used to predict yields under three diverse seasonal rainfall scenarios associated with different patterns of the Central Pacific El Niño influence. According to the simulation results, excessively high seasonal rainfall decreased barley yields. Crop price and annual revenue of the two barley types were also evaluated using a non-linear regression model. For the malt type, the food price was higher with a higher rainfall, while naked barley had a higher revenue under the conditions of a lower rainfall.
Źródło:
International Agrophysics; 2021, 35, 2; 119-129
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Allometric scaling of marbofloxacin pharmacokinetics: a retrospective analysis
Autorzy:
Yohannes, S.
Hossain, M.A.
Kim, J.Y.
Lee, S.J.
Kwak, D.M.
Suh, J.W.
Park, S.C.
Powiązania:
https://bibliotekanauki.pl/articles/31939.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
The association between physiologically dependent pharmacokinetic parameters (CLB, T1/2β, Vdss) of marbofloxacin and body weight was studied in eight animal species based on allometric equation Y = aWb, where ‘Y’ is the pharmacokinetic parameter, ‘W’ is body weight, ‘a’ is allometric coefficient (intercept) and ‘b’ is the exponent that describes relation between pharmacokinetic parameter and body weight. The body clearance of marbofloxacin has shown significant (P<0.0001) relation with size (Bwt) in various animal species. However, half-life and volume of distribution were not in association with body weight. Although half-life and volume of distribution were not in a good correlation with body weight, statistically significant association between the body clearance and body weight suggests validity of allometric scaling for predicting pharmacokinetic parameters of marbofloxacin in animal species that have not been studied yet. However further study considering large sample size and other parameters influencing pharmacokinetics of marbofloxacin is recommended.
Źródło:
Polish Journal of Veterinary Sciences; 2014, 17, 1
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Photoluminescence Studies of Aluminum Nitride Nanowires
Autorzy:
Yang, J.
Na, H.
Kim, H.
Kebede, M.
Choi, R.
Jeong, J.
Lee, C.
Powiązania:
https://bibliotekanauki.pl/articles/1505466.pdf
Data publikacji:
2011-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
78.55.-m
Opis:
We report the production of AlN nanowires by the thermal heating method, for exploring their photoluminescence properties. The room-temperature photoluminescence properties were investigated with different annealing environment. While broad emissions with peaks at around 2.45 and 2.95 eV were obtained from both unannealed and annealed samples, the additional 2.1 eV peak was found from the annealed samples. We have suggested the possible emission mechanisms based on the assumption that both 2.45 eV peak and 2.1 eV peak are ascribed to the nitrogen vacancies. Annealing in N_2 environment exhibited lower intensities of 2.45 eV peak and 2.1 eV peak in comparison to those in Ar environment, presumably due to the suppression of nitrogen vacancies.
Źródło:
Acta Physica Polonica A; 2011, 119, 2; 125-127
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication and Characterization of Ni-CNT Composites by Electrical Explosion of Wire in Different Liquids
Autorzy:
Thuyet-Nguyen, M.
Maithili-Biswas, Maithili-Biswas
Kim, W. J.
Kim, J.-C.
Powiązania:
https://bibliotekanauki.pl/articles/958201.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Nickel-Carbon nanotubes composite
carbon nanotubes
electrical explosion of wire
nano-colloid
magnetic properties
Opis:
In this study, Ni-CNT powders and colloids were synthesized via the Electrical explosion of wire (EEW) in different liquid conditions. The influence of ambient solvents (D.I. Water, ethanol, methanol, acetone and ethylene-glycol) on characteristics of the as-synthesized Ni-CNT was investigated. The morphology and size were observed by field emission scanning electron microscopy (FE-SEM). The Ni particles were spherical or near spherical shape. The phase of the composite powders analyzed via X-ray diffraction demonstrate the presence of CNTs in composite powders is not affect the structure of Ni. However, the phase of the composites was changed based on the changing of liquid conditions. Stability of colloids was investigated by Turbiscan technique. Magnetic properties were also investigated by Vibrating sample magnetometer (VSM) at room temperature. The as-synthesized composite powders revealed a ferromagnetic characteristic material.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1219-1223
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study On The Electro-Refining Of Tin In Acid Solution From Electronic Waste
Badanie elektrorafinacji cyny w roztworze kwasu z e-odpadów
Autorzy:
Son, S. H.
Park, S. C.
Kim, J. H.
Kim, Y. H.
Lee, M. S.
Ahn, J.-W.
Powiązania:
https://bibliotekanauki.pl/articles/352665.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electrorefining
tin
electronic waste
recycling
high purity
elektrorafinacja
cyna
odpady elektroniczne
recykling
Opis:
The tin metal could be retractable from wasted tin scrap, sludge, and wasted electroplated solution hydrometallurgical treatment, and purification process. In order to be used as resource of electronic devices, the retracted crude metal should be purified to the extent of higher than 99.9%. In this study, tin electro-refining process was performed to purify the casted tin crude metal at various experimental conditions: at the current density of 3, 5A/dm2, and in various electrolytes such as hydrochloric acid, sulfuric acid and methansulfonic acid. Additional experiment was conducted using Rotating Disk Electrode (RDE) in order to investigate the rate determining step of tin electro-refining process. The current efficiency, 65.6%, was achievable at the condition of current density, 5A/dm2, and in the electrolyte of Hydrochloric acid. During tin electro-refining process, impurity dissolved from tin crude metal into the electrolyte was analyzed using Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES), and the result showed the concentration of impurity metal gradually increased. Quantitative analysis on casted tin crude metal showed that it consists of tin with 93.9 wt.% and several impurity metals of Ag, Bi, Pb, Cu, and etc. After tin electro-refining process, the purity of tin increased up to 99.985 wt.%.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1217-1220
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On the monitoring system of collision risks among multiple ships
Autorzy:
Son, N. S.
Kim, S. Y.
Lee, C. S.
Powiązania:
https://bibliotekanauki.pl/articles/320903.pdf
Data publikacji:
2012
Wydawca:
Polskie Forum Nawigacyjne
Tematy:
collision risk among multiple ships
Opis:
To reduce crewmembers’ error and increase the safety of ships’ navigation, a recognition system of collision risks among multiple ships is newly-developed. By using ships’ navigational information such as AIS data, an algorithm to calculate collision risks among multiple ships is newly-designed. Collision risks of multiple ships can be estimated considering ships’ position and course of now and future by using fuzzy algorithm. To evaluate the performance of new system, replay simulation is carried out by using actual AIS data of actual collision accident in Korea. In this paper, main features of the monitoring system of collision risks and the results of replay simulation are discussed.
Źródło:
Annual of Navigation; 2012, No. 19, part 1; 149-163
1640-8632
Pojawia się w:
Annual of Navigation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ergonomic Hand Tool and Desk and Chair Development Process
Autorzy:
Shin, D.
Kim, J. Y.
Hallbeck, M. S.
Haight, J. M.
Jung, M. C.
Powiązania:
https://bibliotekanauki.pl/articles/89795.pdf
Data publikacji:
2008
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
ergonomics process
hand tool
desk and chair
Opis:
This paper suggests a practical and simple process consisting of 8 stages: needs assessment, ergonomics guidelines, anthropometry, brainstorming and idea sketch, preliminary model, drafting and rendering, working prototype, and user trials. The feasibility of this process was verified with the development of a modified clamping hand tool and a new student desk and chair. The case studies showed how design difficulties were overcome by integrating ergonomics guidelines in the process.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2008, 14, 2; 247-252
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Growth of NdBa$\text{}_{2}$Cu$\text{}_{3}$O$\text{}_{7-δ}$ Superconducting Thin Films on SrTiO$\text{}_{3}$(100) and LaSrGaO$\text{}_{4}$(100) Substrates
Autorzy:
Park, J.-C.
Ha, D. H.
Kim, I.-S.
Park, Y.K.
Powiązania:
https://bibliotekanauki.pl/articles/1964239.pdf
Data publikacji:
1997-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
74.76.Bz
Opis:
NdBa$\text{}_{2}$Cu$\text{}_{3}$O$\text{}_{7-δ}$ superconducting thin films were grown on SrTiO$\text{}_{3}$(100) and LaSrGaO$\text{}_{4}$(100) substrates by off-axis rf sputtering and pulsed laser deposition. The effects of several deposition parameters, e.g. gas pressure, substrate temperature and energy density were studied. Thin films grown by off-axis rf sputtering were highly c-axis oriented, but those by pulsed laser deposition were predominantly a-axis oriented under our deposition conditions. However, the c-axis oriented portion for the films grown by pulsed laser deposition was increased by increasing the temperature above 800°C. T$\text{}_{c(zero)}$ was 87 K and 83 K for the c- and a-axis oriented films respectively. The critical current density of c-axis oriented films was 10$\text{}^{6}$-10$\text{}^{7}$ A/cm$\text{}^{2}$ below 60 K.
Źródło:
Acta Physica Polonica A; 1997, 92, 1; 105-114
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation of Nickel Powders by Reduction of Nickel Hydroxide Using the Taylor Fluid Flow
Autorzy:
Park, I.-J.
Kim, D.-W.
Kim, G.-H.
Chae, H.-J.
Jung, H.-C.
Powiązania:
https://bibliotekanauki.pl/articles/355021.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ni(OH)2
nickel
Taylor fluid flow
fine powder
Opis:
In this study, Ni(OH)2 was synthesized by the continuous reaction by the Taylor fluid flow and compared with those prepared from the conventional batch type reaction. The nickel powders were synthesized by reduction of Ni(OH)2 in an aqueous solution with hydrazine hydrate acting as the reductant. And then the characteristics of the nickel powder according to the synthesis method were compared. The average particle size of the synthesized Ni(OH)2 using Taylor reactor was generally decreased about 1.5~2.5 times more than the batch reaction. The nickel powders prepared by the batch reaction highly agglomerated with non-uniform particles. In the Taylor reaction, the agglomeration of particles was broken and uniform nickel powder was produced.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1443-1447
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
De-Lubrication Behavior Of Novel EBS Based Admixed Lubricant In Aluminum P/M Alloy
Zachowanie nowego lubrykantu na bazie EBS w trakcie spiekania proszku stopu aluminium
Autorzy:
Oh, M. C.
Seok, H.
Kim, H. J.
Ahn, B.
Powiązania:
https://bibliotekanauki.pl/articles/354258.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
admixed lubricant
compaction pressure
powder metallurgy
sintering
Al-Cu-Mg alloy
lubrykant
zagęszczanie
metalurgia proszków
spiekanie
stop Al-Cu-Mg
Opis:
The objective of the present research is to develop a novel lubricant for Al-Cu-Mg P/M alloy and to address the effects of the lubricant and compaction pressure on sintered properties. A lubricant mixture consisting of Ethylene Bis Stearamide, Zn-Stearate, and fatty acid was newly developed in this study, and the de-lubrication behavior was compared with that of other commercial lubricants, such as Ethylene Bis Stearamide, Zn-Stearate, and Al-Stearate. Density and transverse rupture strength of sintered materials with each lubricant were examined, respectively. The microstructural analysis was conducted using optical microscope.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1427-1431
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Xenoxylon synecology and palaeoclimatic implications for the Mesozoic of Eurasia
Autorzy:
Oh, C.
Philippe, M.
Kim, K.
Powiązania:
https://bibliotekanauki.pl/articles/945484.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
paleontology
fossil wood
Xenoxylon
phytocoenosis
paleoecology
paleoclimate
Mesozoic
Eurasia
Opis:
The distribution of fossil wood genera has been demonstrated to be an effective proxy for Mesozoic terrestrial climates. In this study, we investigated the phytocoenoses, which were associated with Xenoxylon confirmed to be a marker for a cool and/or wet climate in a boreal hemisphere (i.e., Xenoxylon-phytocoenoses) during the Mesozoic, using specimens of fossil wood. It was confirmed that Xenoxylon co-occurs more often with some wood genera than with others. For example, Protocedroxylon, a wood that is most likely related to the Pinaceae, is the genus most often associated with Xenoxylon-phytocoenoses. Although Taxodioxylon is also found in Xenoxylon-phytocoenoses, it is not found, however, as consistently as Protocedroxylon. The distribution and diversity of Xenoxylon-phytocoenoses changed throughout the Mesozoic. During the Late Triassic and Late Cretaceous, Xenoxylon-phytocoenoses had low diversity and were restricted to higher palaeolatitudes during the Late Cretaceous. However, during the Early to Middle Jurassic, Xenoxylon-phytocoenoses were distributed much farther south, while their diversity concomitantly increased sharply. From the Late Jurassic to the Early Cretaceous, the distribution of Xenoxylon phytocoenoses moved northward in Europe and even more so in East Asia. The changes in the distribution of Xenoxylon-phytocoenoses are in agreement with changes in both global and regional climates. Our results also demonstrated that, within the Xenoxylon distribution range, the corresponding phytocoenoses were differentiated along a latitudinal gradient and according to the global climate change patterns during the Mesozoic.
Źródło:
Acta Palaeontologica Polonica; 2015, 60, 1; 245-256
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization Of The Graded Microstructure In Powder Sintered Porous Titanium
Charakterystyka gradientowej mikrostruktury porowatego tytanu spiekanego z proszku
Autorzy:
Oak, J.-J.
Bang, J. I.
Bae, K.-C.
Kim, Y. H.
Lee, Y. C.
Chun, H. H.
Park, Y. H.
Powiązania:
https://bibliotekanauki.pl/articles/356239.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
titanium
powder metallurgy
porous structure
sintering
biomaterial
tytan
metalurgia proszków
struktura porowata
spiekanie
biomateriał
Opis:
The proposed sintering process produce porosity and functional graded microstructure in the sinterd titanium powders. Titanium powders with different micro sizes were sintered at the proposed temperature region at 1200 and 1300°C for 2h. The apatite-forming on the graded microstructure is observed by immersion test in Hanks balanced salt soluion at 37°C. Sintering condition of titanium powders is estimated by thermogravitmetry-differential thermal analysis (TG-DTA). The synthersied surface structures and apatite-forming ability were characterized by a field emission scanning electron microscopy (FE-SEM) observation and energy dispersive X-ray spectroscopy (EDS) analysis. As results, these graded microstructure of sintered porous titanium powders reveals apatite-forming ability as osseointegration by calcification in Hanks balanced salt soluion(HBSS) at 37°C.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1265-1269
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Hafnium and Zirconium to Glass Forming Ability, Thermal Stability, Plasticity Deformation and Crystallization of Ni-Free Pentabasic Ti-Based Bulk Metallic Glasses
Autorzy:
Oak, J.-J.
Kim, Y. H.
Bae, K.-C.
Park, Y. H.
Powiązania:
https://bibliotekanauki.pl/articles/352087.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ti-based alloy
metallic glass
Ti fiber
glass formability
plastic deformation
Opis:
The newly designed Ti-based bulk metallic glass (BMG) in which case of fracture behavior was observed 1990MPa to compressive strength with a wide plastic deformation around 7% after process of elastic deformation. This phenomenon can be compared with those of Ti-based alloys and other Ti-based BMGs and indicates high potential to be applied in use. It was evaluated the Ti-based BMG for thermal stability that the reduced glass parameters, ΔTx, Trg and γ, are 79K, 0.50 and 0.38, respectively. In addition, it reveals high activation energies for crystallization in which are estimated to Ex1 = 291.77 ±9.71 kJ/mol, Ex2 = 588.77 ±28.88 kJ/mol and Ex3 = 330.26 ±3.61 kJ/mol on kissinger plotting in this study.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1081-1087
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Formation of Different Cu Nanopowders and Stability of Cu Fluids Produced by Electrical Explosion of Wire in Liquid
Autorzy:
Nguyen, M.-T.
Kim, J.-H.
Kim, J.-C.
Powiązania:
https://bibliotekanauki.pl/articles/355217.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Cu nanopowder
Cu nanofluids
electrical explosion of wire
stability of nanofluids
Opis:
In this study, copper nanoparticles and nanofluids were synthesized by electrical explosion of wire (EEW) in liquid media such as water, ethanol, and acetone. The effect of the different conditions on the properties of the as-synthesized Cu powders and nanofluids were investigated. X-ray diffraction (XRD) analysis was employed to measure the phase of the as-synthesized powder. Only pure Cu phase appeared in case of acetone condition, but CuO and CuO2 phases could be observed in the others. The EEWed particle size was broadened from under 50 to 100 nm. The results showed that acetone was the best condition for achieving smaller particles, preventing the oxidation of the Cu particles and good stability of the nanofluids.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1453-1457
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aluminum Nitride Formation From Aluminum Oxide/Phenol Resin Solid-Gel Mixture By Carbothermal Reduction Nitridation Method
Wytwarzanie azotku aluminium z żelowej mieszaniny tlenku aluminium z żywicą fenolową metodą azotowania podczas carbotermicznej redukcji
Autorzy:
Mylinh, D. T.
Yoon, D. H.
Kim, C.-Y.
Powiązania:
https://bibliotekanauki.pl/articles/356779.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminum nitride
powder
carbothermal reduction
nitridation
solid-gel mixture
azotek aluminium
proszek
redukcja karbotermiczna
azotowanie
żelowa mieszanina
Opis:
Hexagonal and cubic crystalline aluminum nitride (AlN) particles were successfully synthesized using phenol resin and alpha aluminum oxide (α-Al2O3) as precursors through new solid-gel mixture and carbothermal reduction nitridaton (CRN) process with molar ratio of C/Al2O3 = 3. The effect of reaction temperature on the decomposition of phenol resin and synthesis of hexagonal and cubic AlN were investigated and the reaction mechanism was also discussed. The results showed that α-Al2O3 powder in homogeneous solid-gel precursor was easily nitrided to yield AlN powder during the carbothermal reduction nitridation process. The reaction temperature needed for a complete conversion for the precursor was about 1700°C, which much lower than that when using α-Al2O3 and carbon black as starting materials. To our knowledge, phenol resin is the first time to be used for synthesizing AlN powder via carbothermal reduction and nitridation method, which would be an efficient, economical, cheap assistant reagent for large scale synthesis of AlN powder.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1551-1555
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies