Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Jing, Yi" wg kryterium: Autor


Wyświetlanie 1-6 z 6
Tytuł:
Research on mine seal stability under explosion load and ground pressure in underground coal mines
Autorzy:
Cheng, Jianwei
Song, Wanting
Jing, Yi
Zhang, Xixi
Korzec, Marek
Borowski, Marek
Wang, Yue
Powiązania:
https://bibliotekanauki.pl/articles/218944.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
kopalnia węgla
symulacja numeryczna
dłutowanie
seals in underground coal mines
numerical simulation
slotting
ground pressure
roof to floor moving convergence
damage level
Opis:
The mine seals in coal mines with a good impact resistance and air tightness are mainly used to isolate abandoned mining areas from active workings. For one thing, it can prevent the leakage of harmful gases, such as toxic gas from abandoned areas. For another, once an underground mine explosion happens, it can effectively block the spread of the explosion between the abandoned mining areas and the active workings. Hence, it is of great significance to study the explosion-proof performance and mechanical properties of the mine seals. First of all, the effect of slotting on the stability of the seals in coal mines under explosion load was explored in this study. By numerical simulations, the mechanical response characteristics of the seals with or without cutting a slot under the explosion load were compared in detail. The results show that slotting improved the stress concentration at the contact surface of surrounding rock by transferring partial impact received by mine seals to the surrounding rocks, thus, to achieve the effect of buffering explosion impact. Besides, such effect will be enhanced with increasing cutting depth into rock, and will stabilize when the depth is 20 cm. On this basis, the mechanical properties and damage of the seals constructed by different materials (standard brick and #C40 concrete) under the explosion load were compared. It was found that once a slot was set, the maximum deformation of the concrete seal was reduced, while the maximum deformation of the brick seal increased. Since the non-deformability of the concrete seal is obviously stronger than that of the brick seal, with the impact resistance stronger than that of the brick seal, the concrete seal is more suitable for slotting. Moreover, the damage of the seals in underground coal mines under the strata ground pressure was studied; the results of which show that the damage state under the ground pressure can be divided into 3 levels, i.e. no damage, minor damage and rapid development of damage. Meanwhile, it was found that the prestressed structure fordem by the ground pressure at the level of no damage can enhance the protective effect of the seals in coal mines. However, when the ground pressure was further developed, the seal itself was destroyed and the protective effect was lost. In addition, the influence of roof to floor moving convergence, a deformation parameter of the roadway, on the seals was also investigated. The results show that the ground pressure and roof-to-floor convergence act on the seals in coal mines in the same way, thus roof to floor moving convergence can replace the ground pressure to analyze other related mechanical properties of the seals in coal mines in the future researches.
Źródło:
Archives of Mining Sciences; 2020, 65, 1; 71-87
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of loading and running characteristic of hydraulic support in underhand mining face
Badanie obciążenia i działania podpór hydraulicznych w przodku nachylonym
Autorzy:
Jing-Yi, C.
Yi-Dong, Z.
Liang, C.
Ming, J.
Wei, G.
Lin-Sheng, G.
Powiązania:
https://bibliotekanauki.pl/articles/218960.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
przodek nachylony
kąty depresji
charakterystyka pracy podpory hydraulicznej
stabilność podpory
diclinic working face
large depression angle
running characteristic of support
stability of support
Opis:
According to complex geological conditions of working face E1108 in Xin-ji mine #2, loading and running characteristic of hydraulic support, influence of depression angle on mining pressure behaviors, as well as relation between advancing speed and the support loading were measured and analyzed. The results indicate that depression angle is inversely proportional to support resistance, in other words, larger depression angle area coincides with lower support resistance area. Moreover, support resistance is generally high when working face advancing speed is slow. Technologies for controlling hydraulic support stability such as improving advancing speed properly, controlling mining height and increasing support resistance are put forward based on research.
Z uwzględnieniem złożonych warunków geologicznych w ścianie E1108 w kopalni Xin-Ji #2 dokonano pomiarów i analiz obciążenia i działania podpór hydraulicznych, zbadano wpływ kąta depresji na wielkość ciśnienia poziomu wydobywczego, a także zależność pomiędzy szybkością posuwania się na przodku i obciążeniem podpór. Wyniki analiz wskazują, że kąt depresji jest odwrotnie proporcjonalny do wytrzymałości podpory. Przy większych wartościach kąta depresji mamy do czynienia z obszarem gdzie wytrzymałość podpór jest niższa. Ogólnie rzecz biorąc, wytrzymałość podpory jest zazwyczaj wysoka dla niewielkich prędkości posuwania się na przodku. W pracy przedstawiono metody kontroli stabilności podpór hydraulicznych poprzez regulację szybkości posuwania się przodka, regulację wysokości wybierania oraz poprzez zwiększenie wytrzymałości podpór.
Źródło:
Archives of Mining Sciences; 2017, 62, 1; 215-224
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Color image encryption scheme based on quaternion discrete multi-fractional random transform and compressive sensing
Autorzy:
Ye, Huo-Sheng
Dai, Jing-Yi
Wen, Shun-Xi
Gong, Li-Hua
Zhang, Wen-Quan
Powiązania:
https://bibliotekanauki.pl/articles/2033985.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
color image encryption
quaternion discrete multi-fractional random transform
compressive sensing
confusion-diffusion strategy
Opis:
A color image compression-encryption algorithm by combining quaternion discrete multi-fractional random transform with compressive sensing is investigated, in which the chaos-based fractional orders greatly improve key sensitivity. The original color image is compressed and encrypted with the assistance of compressive sensing, in which the partial Hadamard matrix adopted as a measurement matrix is constructed by iterating Chebyshev map instead of utilizing the entire Guassian matrix as a key. The sparse images are divided into 12 sub-images and then represented as three quaternion signals, which are modulated by the quaternion discrete multi-fractional random transform. The image blocking and the quaternion representation make the proposed cryptosystem avoid additional data extension existing in many transform-based methods. To further improve the level of security, the plaintext-related key streams generated by the 2D logistic-sine-coupling map are adopted to diffuse and confuse the intermediate results simultaneously. Consequently, the final ciphertext image is attained. Simulation results reveal that the proposed cryptosystem is feasible with high security and has strong robustness against various attacks.
Źródło:
Optica Applicata; 2021, 51, 3; 349-364
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical study of detonation processes in rotating detonation engine and its propulsive performance
Badanie numeryczne procesów detonacji w wirującym silniku detonacyjnym i jego wydajności napędowej
Autorzy:
Yi, Tae-Hyeong
Lou, Jing
Turangan, Cary Kenny
Wolanski, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/36427720.pdf
Data publikacji:
2020
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
detonation wave
rotating detonation engine
propulsion
chemical kinetics
finite volume method
adaptive mesh refinement
fala detonacyjna
wirujący silnik detonujący
napęd
kinetyka chemiczna
metoda skończonej objętości
adaptacyjne udoskonalanie siatki
Opis:
Numerical studies on detonation wave propagation in rotating detonation engine and its propulsive performance with one- and multi-step chemistries of a hydrogen-based mixture are presented. The computational codes were developed based on the three-dimensional Euler equations coupled with source terms that incorporate high-temperature chemical reactions. The governing equations were discretized using Roe scheme-based finite volume method for spatial terms and second-order Runge-Kutta method for temporal terms. One-dimensional detonation simulations with one- and multi-step chemistries of a hydrogen-air mixture were performed to verify the computational codes and chemical mechanisms. In two-dimensional simulations, detonation waves rotating in a rectangular chamber were investigated to understand its flowfield characteristics, where the detailed flowfield structure observed in the experiments was successfully captured. Three-dimensional simulations of two-waved rotating detonation engine with an annular chamber were performed to evaluate its propulsive performance in the form of thrust and specific impulse. It was shown that rotating detonation engine produced constant thrust after the flowfield in the chamber was stabilized, which is a major difference from pulse detonation engine that generates repetitive and intermittent thrust.
Przedstawiono badania numeryczne propagacji fali detonacyjnej w wirującym silniku detonacyjnym oraz jego wydajności pędnej z jedno- i wielostopniową mieszanką chemiczną na bazie wodoru. Kody obliczeniowe opracowano w oparciu o trójwymiarowe równania Eulera w połączeniu z pojęciami źródłowymi, które obejmują wysokotemperaturowe reakcje chemiczne. Obowiązujące równania zostały zdyskredytowane przy użyciu metody skończonej objętości opartej na schemacie Roe'a dla terminów przestrzennych oraz metody Runge-Kutta drugiego rzędu dla terminów czasowych. W celu weryfikacji kodów obliczeniowych i mechanizmów chemicznych przeprowadzono jednowymiarowe symulacje detonacji z jedno- i wieloetapowymi chemikaliami mieszaniny wodoru i powietrza. W symulacjach dwuwymiarowych badano fale detonacyjne obracające się w komorze prostokątnej w celu zrozumienia jej charakterystyki pola przepływu, gdzie udało się uchwycić szczegółową strukturę pola przepływu zaobserwowaną w doświadczeniach. Przeprowadzono trójwymiarowe symulacje dwufalowego wirującego silnika detonacyjnego z komorą pierścieniową w celu oceny jego właściwości pędnych w postaci ciągu i impulsu właściwego. Wykazano, że wirujący silnik detonujący wytwarza stały ciąg po ustabilizowaniu się pola przepływu w komorze, co stanowi istotną różnicę w stosunku do silnika detonującego impulsowo, który wytwarza powtarzalny i przerywany ciąg.
Źródło:
Transactions on Aerospace Research; 2020, 3 (260); 30-48
0509-6669
2545-2835
Pojawia się w:
Transactions on Aerospace Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Relationship between fracture toughness and temperature in epoxy coatings
Odporność powłok epoksydowych na kruche pękanie w funkcji temperatury
Autorzy:
Bo, Z.
Jing-wei, L.
Shu-guang, L.
Yi-hui, L.
Ju-tao, H.
Powiązania:
https://bibliotekanauki.pl/articles/946951.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
epoxy resin
fracture toughness
żywica epoksydowa
kruche pękanie
Opis:
The fracture toughness KIC of nine kinds of epoxy coating specimens was tested in the temperature range from 20 to -40 °C, and the influence of temperature on KIC was discussed. The results showed that KIC decreases sharply in unmodified systems but increases for some specimens with 20—50 portions of rubber impact modifier. The elastic modulus test indicated that KIC is closely related with the modulus. Scanning Electron Microscopy images showed that the introduction of impact modifier to epoxy can enlarge the ductile deformation of the fracture surface. As a result, the addition of rubber modifier is a suitable path to improve the anti-cracking performance of epoxy coatings at low temperature due to an increase of fracture toughness and reduction of elastic modulus, which thus can reduce the thermal stress in the process of cooling.
Zbadano odporność na kruche pękanie (KIC) dziewięciu rodzajów powłok epoksydowych w zakresie temperatury -40—20 °C. Wyniki badań wskazują, że wartość KIC powłok epoksydowych bez udziału modyfikatora (polimeru uretanowego DESMOCAP 11) zmniejsza się gwałtownie wraz z obniżeniem temperatury. Dodatek modyfikatora, w ilości 20—50 g/100 g żywicy, zwiększa odporność powłok na kruche pękanie. Na podstawie analizy SEM stwierdzono, że wprowadzenie do żywicy epoksydowej modyfikatora DESMOCAP 11 powoduje zmniejszenie deformacji plastycznej powierzchni powłoki poddanej uderzeniu. Wykazano też, że obecność modyfikatora powoduje zmniejszenie wartości modułu Younga i wpływa korzystnie na odporność powłok epoksydowych na naprężenie termiczne związane z procesem chłodzenia.
Źródło:
Polimery; 2015, 60, 4; 258-263
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
COMBINATION OF BERBERINE AND MATRINE AFFECTS APOPTOSIS AND CELLCYCLE IN HUMAN CERVICAL CANCER CELLS
Autorzy:
Zhang, Qijiayu
Sun, Yi
Huang, Yuxi
Sun, Jing
Zhao, Chongbo
Song, Yijun
Wu, Juanhua
Powiązania:
https://bibliotekanauki.pl/articles/895719.pdf
Data publikacji:
2019-12-29
Wydawca:
Polskie Towarzystwo Farmaceutyczne
Tematy:
apoptosis
cervical cancer
Matrine
berberine
Opis:
Cervical cancer is the fourth leading cause of malignancy-related mortality in women worldwide, and effective advanced-stage therapies are urgently required. Berberine is a quaternary ammonium compound extracted from traditional Chinese medicinal herbs, including Phellodendron spp., with antibacterial and antitumor activities. Matrine, the main active ingredient of Sophora flavescens rhizomes, has not only traditionally described health effects but is also widely used for its anticancer, anti-inflammatory, immunoregulatory, antiviral, and hepatoprotective effects. We investigated the antitumor activities of berberine and matrine against human cervical cancer HeLa and SiHa cells using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, along with flow cytometry and western blotting analyses, to assess the effect of the compounds on the cellular status and apoptosis- and cell cycle-related proteins. The 24 h half-maximal inhibitory concentrations (IC50) of berberine and matrine were 123.633 ± 4.278 µmol/L and 9.625 ± 0.245 mmol/L against HeLa cells and 105.067 ± 3.745 µmol/L and 8.50 ± 0.23 mmol/L against SiHa cells, respectively. Berberine plus matrine inhibited cancer cell growth and caused cell cycle arrest. We observed an increased stimulation of apoptosis, which was likely mediated by enhanced levels of caspase-3, caspase-9, and B-cell lymphoma 2 (Bcl-2)-associated X protein (Bax), as well as decreased Bcl-2 protein expression. Cell cycle arrest in the G1 phase was probably mediated by p21 upregulation and cyclin-dependent kinase (Cdk)-4, Cdk-6, and cyclin D1 suppression. Combination treatment with berberine and matrine effectively inhibited human cervical cancer cell proliferation, most likely by stimulating apoptosis and inducing cell cycle arrest.
Źródło:
Acta Poloniae Pharmaceutica - Drug Research; 2019, 76, 6; 1089-1097
0001-6837
2353-5288
Pojawia się w:
Acta Poloniae Pharmaceutica - Drug Research
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-6 z 6

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies