Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Jiang, H." wg kryterium: Autor


Tytuł:
A Novel Multi-Exponential Function-based Companding Technique for Uniform Signal Compression over Channels with Limited Dynamic Range
Autorzy:
Moazzeni, T.
Selvaraj, H.
Jiang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/226887.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
companding
multi-exponential function
Mu-law
quantization
uniform signal compression
Opis:
Companding, as a variant of audio level compression, can help reduce the dynamic range of an audio signal. In analog (digital) systems, this can increase the signal-to-noise ratio (signal to quantization noise ratio) achieved during transmission. The µ-law algorithm that is primarily used in the digital telecommunication systems of North America and Japan, adapts a companding scheme that can expand small signals and compress large signals especially at the presence of high peak signals. In this paper, we present a novel multi-exponential companding function that can achieve more uniform compression on both large and small signals so that the relative signal strength over the time is preserved. That is, although larger signals may get considerably compressed, unlike µ-law algorithm, it is guaranteed that these signals after companding will definitely not be smaller than expanded signals that were originally small. Performance of the proposed algorithm is compared with µ-law using real audio signal, and results show that the proposed companding algorithm can achieve much smaller quantization errors with a modest increase in computation time.
Źródło:
International Journal of Electronics and Telecommunications; 2010, 56, 2; 125-128
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation and Characterization of Desensitized ?-HNIW in Solvent-Antisolvent Recrystallizations
Autorzy:
Jiang, X.
Guo, X.
Ren, H.
Jiao, Q.
Powiązania:
https://bibliotekanauki.pl/articles/358201.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
ε -HNIW
supersaturation
crystal morphology
thermal decomposition
reduced sensitivity
Opis:
The solubility of hexanitrohexaazaisowurtzitane (HNIW) in solvent and solvent-antisolvent mixtures, and the temperature at which the HNIW's polymorph transforms were studied. The solubility of HNIW in solvent-antisolvent mixtures was measured at 30 C and these data were fitted to a generalized solubility curve. Recrystallization experiments were conducted at 30 C in the case of saturation with the volume ratio of ethyl acetate to petroleum ether (chloroform) ranging from 0:1 to 4:1. Desensitized HNIW was obtained by ethyl acetate and petroleum ether crystallization and characterized by Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), High Performance Liquid Chromatography (HPLC) and Scanning Electron Microscopy (SEM). The FTIR and XRD spectra confirmed the structural features of ε-HNIW. The blocklike ε-HNIW grains had an average particle size of 160 ?m and high purity (98.52%). The decomposition of ε-HNIW was observed in the temperature range of 225-246 C by Differential Scanning Calorimetry (DSC). Furthermore, the impact and friction sensitivity tests suggested that the desensitized ε-HNIW was less sensitive than raw HNIW. Small scale gap tests with desensitized ε-HNIW showed that these crystals are less sensitive to shock initiation.
Źródło:
Central European Journal of Energetic Materials; 2012, 9, 3; 219-236
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Seed vigor, photosynthesis and early growth of saplings of different triploid Betula families
Autorzy:
Mu, H.
Jiang, J.
Li, H.
Liu, G.
Powiązania:
https://bibliotekanauki.pl/articles/41671.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Tematy:
seed vigor
photosynthesis
early growth
sapling
triploid
Betula
birch
polyploidy
European aspen
aspen
Populus tremula
germination energy
Opis:
Breeding scientists have given extensive attention to triploids in trees because of their importance to forestry. Consequently, creating and breeding triploids of good quality has become one of purposes of tree breeding. We chose two autotetraploids (Betula platyphylla, named Q10 and Q65) as female parents and eight hybrid diploids (B. platyphylla × B. pendula, named F1 – F8) as male parents to obtain progenies through controllable pollination, resulting in triploid progenies. Germination rate and germination energy of triploid seeds of Q65 were significantly higher (P < 0.01) than in triploid seed s of Q10. Triploid families with Q65 as female parent had a large quantity of saplings, whereas triploid families with Q10 as female parent had a small quantity of saplings. Triploid families with Q65 as female parent were generally superior in base diameter and height to base diameter ratio when compared to a diploid family. Q65×F3 was preliminarily recognized as the superior family. These results demonstrate that the female parent has a major influence on triploid progenies, although the male parent also has a small influence. The results provided a reference to build seed orchards of triploid birch trees, choose tetraploids as female parents and forecast triploid families of good quality.
Źródło:
Dendrobiology; 2012, 68
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Supervisory fault tolerant control with integrated fault detection and isolation: a switched system approach
Autorzy:
Yang, H.
Jiang, B.
Cocquempot, V.
Lu, L.
Powiązania:
https://bibliotekanauki.pl/articles/331374.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
sterowanie tolerujące uszkodzenia
detekcja uszkodzeń
lokalizacja uszkodzeń
sterowanie rozdzielcze
układ komutowany
fault-tolerant control
fault detection
fault isolation
switching control
switched systems
Opis:
This paper focuses on supervisory fault tolerant control design for a class of systems with faults ranging over a finite cover. The proposed framework is based on a switched system approach, and relies on a supervisory switching within a family of pre-computed candidate controllers without individual fault detection and isolation schemes. Each fault set can be accommodated either by one candidate controller or by a set of controllers under an appropriate switching law. Two aircraft examples are included to illustrate the efficiency of the proposed method.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2012, 22, 1; 87-97
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis and Stab Resistance of Shear Thickening Fluid (STF) Impregnated Glass Fabric Composites
Oporność na przebicie kompozytów z tkanin z włókien szklanych nasyconych cieczą gęstniejącą pod wpływem ścinania
Autorzy:
Yu, K.
Cao, H.
Qian, K.
Jiang, L.
Li, H.
Powiązania:
https://bibliotekanauki.pl/articles/234322.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
ścinanie płynu
reologiczne własności
tkaniny
szkło
kompozyty
mechanizm przebicia
shear thickening fluid
rheological property
glass fabrics
composites
impact behavior
Opis:
A shear thickening fluid (STF) was prepared successfully and its rheological behavior was investigated. Glass fabrics were soaked in STF/ethanol solution to prepare STF-glass fabric composites. The morphologies of the STF-glass fabric composites were observed by SEM. Quasi-static stab-resistant tests were carried out on both the neat glass fabrics and STF-glass fabric composites using a knife based on the areal density. The corresponding puncture and strengthen mechanisms were also investigated.
Przygotowano ciecz gęstniejącą pod wpływem ścinania (STF) i zbadano jej właściwości reologiczne. Tkaniny z włókien szklanych były nasycane roztworem STF/etanol dla przygotowania kompozytów. Morfologię kompozytów badano za pomocą skaningowej mikroskopii elektronowej. Prowadzono quasi-statyczne badania na przebicie na tkaninach szklanych nienasączonych oraz na opracowanych kompozytach za pomocą noża o specjalnie zaprojektowanej konstrukcji. Niezależnie od testów porównawczych badano również mechanizm przebicia.
Źródło:
Fibres & Textiles in Eastern Europe; 2012, 6A (95); 126-128
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Three-dimensional Computer Simulation of Warp Knitted Spacer Fabric
Trójwymiarowa symulacja komputerowa osnowowych dzianin dystansowych
Autorzy:
Zhang, L. Z.
Jiang, G. M.
Miao, X. H.
Cong, H. L.
Powiązania:
https://bibliotekanauki.pl/articles/234059.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
symulacja 3D
dzianina
wzór ściegu
przędza
warp knitting
spacer fabric
stitch model
pile yarn
3D simulation
Opis:
The main objective of this paper was to simulate the three-dimensional structure of warp knitted spacer fabric using computer technology. For this purpose, the geometric structure of warp knitted spacer fabric was investigated. Specifically, a 3D spacial stitch model of warp knitted spacer fabric is developed using non-uniform rational B-spline(NURBS) curves and surfaces. Since the stitches in real fabric are usually inclined, the offset rule of special stitches is employed in order to simulate the stitches more realistically. Then the offset calculation formulas for each given point in the 3D stitch model are obtained. Finally 3D computer simulation of warp knitted spacer fabric is achieved and some simulation images of this kind of fabric are generated on the computer. The mechanism developed in this paper can model the 3D structures of common warp knitted spacer fabric interactively and accurately.
Celem badań była symulacja trójwymiarowej struktury osnowowych dzianin dystansowych z zastosowaniem technologii komputerowej. Zbadano geometryczną strukturę trójwymiarowych dzianin dystansowych. Trójwymiarowy model splotu tych dzianin został opracowany za pomocą analizy krzywych i powierzchni NURBS. Ponieważ w rzeczywistych dzianinach sploty są zazwyczaj nachylone, w celu uzyskania bardziej realistycznego obrazu dzianiny dystansowej zastosowano regułę pozwalająca na wyrównanie splotów specjalnych. Następnie dla każdego punktu trójwymiarowego modelu splotu określono odpowiednie równania. W efekcie uzyskano 3D komputerową symulację dzianiny oraz obrazy tych struktur. Na podstawie procedury opracowanej w niniejszej pracy można dokładnie modelować proste dzianiny dystansowe.
Źródło:
Fibres & Textiles in Eastern Europe; 2012, 3 (92); 56-60
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristics of the staminate flower and pollen from autotetraploid Betula platyphylla
Autorzy:
Lin, L.
Yao, Q.
Xu, H.
Mu, H.
Jiang, J.
Powiązania:
https://bibliotekanauki.pl/articles/41710.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Opis:
Comparison of the staminate flower and pollen of Betula platyphylla between autotetraploid and diploid individuals may reveal the reason for cross sterility when an autotetraploid male parent is crossed with a diploid female parent. Staminate flowers and pollen from seven autotetraploid individual trees were examined. The morphologies of the staminate flower and pollen and pollen germination of these autotetraploid individuals were compared with diploid trees. The structure of the staminate flower did not differ between autotetraploids and diploids, whereas the size of the staminate flower was larger in the autotetraploids compared with the diploids. The mean diameter and pore depth of the pollen were significantly larger in autotetraploid individuals compared with diploids, and several abnormalities in pollen morphology were found commonly amongst pollen from the autotetraploid trees. The germination rate of pollen from autotetraploids was significantly inferior to that of diploids and there was a significant negative correlation between germination rate and the percentage of abnormal pollen. These results demonstrate that the autotetraploid should not be chosen as the male parent to obtain hybrid triploid progenies because the pollen is abnormal and results in low fertility despite its large size. The results provide important information for selecting and distributing parent strains with the aim of building seed orchards of triploid birch trees.
Źródło:
Dendrobiology; 2013, 69
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structure and Improvement of Properties of Floss Silk via Scouring and Finishing Treatment
Struktura i możliwość poprawy właściwości jedwabiu naturalnego poprzez procesy wykończenia
Autorzy:
Lin, H.
Ma, P.
Ning, W.
Huang, J.
Jiang, F.
Hu, Z.
Xiao, H.
Powiązania:
https://bibliotekanauki.pl/articles/233484.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
floss silk
finishing treatment
structure
silk fibre properties
nici jedwabne
obróbka wykańczająca
struktura
właściwości włókien jedwabiu
Opis:
In the present study, floss silk was treated by scouring and finishing, respectively. The micro structure was observed with scanning electron microscopy (SEM), the mechanical property tested by an Instron 5566 tensile tester, and the crystal structure was analysed with Fourier transform attenuated total reflection infrared spectroscopy (FTIR) and X-ray diffraction (XRD), respectively. The results show that the properties of floss silk treated with the refining method are better than with the alkali method.
Badania dotyczyły obróbki wykańczalniczej jedwabiu naturalnego. Mikrostruktura jedwabiu była badana za pomocą skaningowej mikroroskopii elektronowej, a właściwości mechaniczne testowane były klasyczną zrywarką firmy Instron, podczas gdy strukturę krystaliczną analizowano za pomocą spektroskopii w podczerwieni (FTIR) oraz rozproszenia promieniowania rentgenowskiego. Wyniki pozwoliły wytypować najlepszą w danych warunkach metodę obróbki.
Źródło:
Fibres & Textiles in Eastern Europe; 2013, 3 (99); 18-21
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A new design of a photonic crystal fiber with a beam shaping effect and flexible management of dispersion and confinement loss
Autorzy:
Huang, Y.
Jiang, P
Yang, H.
Yu, M.
Powiązania:
https://bibliotekanauki.pl/articles/173817.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
photonic crystal fiber
hollow beam
chromatic dispersion
Opis:
A new design of a guiding-index photonic crystal fiber which possesses a beam shaping effect and flexible control of dispersion has been proposed in this paper. It can shape a Gaussian beam into a circular hollow beam with certain dimension, which can be used in optical communication systems with a Cassegrain antenna to improve transmission efficiency by avoiding the loss of energy caused by the subreflector center reflection. In addition, its dispersion and confinement loss can be changed in a broad range by slightly adjusting structural parameters under condition that the hollow beam dimension remains about the same. Fairly practical properties, zero dispersion or flattened dispersion, can be obtained when structural parameters are set appropriately. A series of models with different parameters are analyzed and compared. Results of numerical simulation show that the ultra-low dispersion of 1.802 ps/km/nm can be obtained when λ = 1.31 μm. Several modest design parameters are given as well.
Źródło:
Optica Applicata; 2014, 44, 3; 375-387
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analytical Models for Distribution of the Envelope and Phase of Linearly Modulated Signals in AWGN Channel
Autorzy:
Moazzeni, T
Jiang, Y.
Selvaraj, H.
Chen, T.
Powiązania:
https://bibliotekanauki.pl/articles/226459.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
digital modulation
linear modulation
probability density function
phase
AWGN
Opis:
In this paper, analytical expressions for the distribution of the envelope and phase of linearly modulated signals such as BPSK, M-PSK, and M-QAM in AWGN are presented. We perform numerical simulations for different orders of signal constellations. The results show that the proposed theoretical models are in excellent agreement with the estimated distributions from various numerical experiments.
Źródło:
International Journal of Electronics and Telecommunications; 2014, 60, 1; 79-82
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Automatic Identification of Jacquard Warp-knitted Fabric Patterns Based on the Wavelet Transform
Automatyczna identyfikacja wzorów żakardowych dzianin osnowowych oparta na transformacji typu „wavelet”
Autorzy:
Jiang, G. M.
Zhang, D.
Cong, H. L.
Zhang, A L
Gao, Z.
Powiązania:
https://bibliotekanauki.pl/articles/234403.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
Jacquard
warp-knitted fabric
pattern
automatic identification
wavelet transform
dzianina żakardowa
transformacja typu "wavelet"
automatyczna identyfikacja
dzianina osnowowa
Opis:
In view of the fact that the design of jacquard warp knitting patterns is time-consuming, this paper proposes a rapid segmentation method to divide the multi-textural regions of jacquard warp-knitted fabric which could be used for automatic identification of fabric patterns to improve the efficiency of design. After pretreatment, the images scanned were decomposed by a two-layer two-dimensional wavelet transform and the standard deviations of five channels were extracted as the eigen values. Then, after giving the cluster centers, a multi-channel clustering was made combined with a K-means clustering algorithm. Finally the removal of noises caused by classification errors was needed , after which an accurate identification image was obtained. The experiments show that this method can achieve automatic texture segmentation of jacquard warp-knitted fabric with more than three textural regions. The identification results have high regional consistency, and the segmentation accuracy is up to 92%. The method can also adapt to a variety of mesh regions. Besides this, the approach is fast and can simplify craft personnel’s traditional process of pattern tracing classification when it is combined with CAD. Through this method, the efficiency of jacquard warp-knitted product designing can be improved a lot.
Biorąc pod uwagę, że określenie wzorów żakardowych dzianin osnowowych jest czasochłonne, zastosowano metodę szybkiej segmentacji wzorów dla wydzielenia wielostrukturalnych rejonów dzianin, które mogłyby zostać wykorzystane dla automatycznej identyfikacji wzorów dzianin i usprawnieniu procesu projektowania. Po wstępnej obróbce zeskanowane obrazy zostają podzielone poprzez dwuwarstwową, dwuwymiarową transformacje typu „wavelet”, następnie określa się odchylenia standardowe dla pięciu kanałów i ekstrahuje się jako wartość własną. Następnie przeprowadza się wielowarstwową analizę klastrów opartą na specjalnym algorytmie. W końcu usuwa się szumy spowodowane przez błędy klasyfikacyjne co pozwala na dokładną identyfikację obrazów. Eksperymenty wykazują, że opracowana metoda pozwala na automatyczną segmentację struktury osnowowych dzianin żakardowych z więcej niż trzema regionami strukturalnymi. Opracowana metoda zapewnia identyfikację z dokładnością do 92% i znacznie usprawnia proces projektowania dzianin żakardowych.
Źródło:
Fibres & Textiles in Eastern Europe; 2014, 2 (104); 53-56
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Geometric Model for Multi-axial Warp-knitted Fabric Based on NURBS
Model geometryczny wieloosiowej dzianiny osnowowej oparty na krzywych NURBS
Autorzy:
Jiang, G
Gu, L
Cong, H L
Miao, X H
Zhang, A
Gao, Z
Powiązania:
https://bibliotekanauki.pl/articles/232674.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
warp knitting
multi-axial
geometric model
3D simulation
fibre volume fraction
struktura systemu przędz
modelowanie przędz
osnowowe dzianiny wieloosiowe
3D przędz
Opis:
Based on studying the constitution of yarn system and the geometric modality of relevant yarns in the multi-axial warp-knitted structure, 3D solid models of the loop yarns, insertion yarns and chopped strand mat in modern multi-axial warp-knitted fabrics were built to reflect the geometric structures of the three items by using NURBS curves and the principle of curved surfaces. Besides, OpenGL was employed to explore the corresponding 3D computer simulation system under the condition of VC++.NET, which could simulate the geometric model of multi-axial warp-knitted fabric. Meanwhile, through the selection of the unit cell of the fabric, the unit cell model of modern multi-axial warp-knitted fabric with chopped strand mat was developed and the relation between geometric parameters and process variables was deduced. The theoretical fibre volume fraction formula of modern multi-axial warp-knitted fabric with chopped strand mat was obtained as well. Furthermore, by using different specifications of fabric as samples, theoretical and experimental values of the fibre volume fraction were compared. The results revealed that there was good agreement between the theoretical and experimental values, which proved that the model was scientific and practical.
Na podstawie badań struktury systemu przędz i geometrycznej modalności odpowiednich przędz w wieloosiowej dzianej strukturze osnowowej opracowano modele brył 3D przędz pętli, przędz wprowadzanych i struktur z włókien odcinkowych we współczesnych wieloosiowych dzianinach osnowowych w celu zobrazowania ich geometrycznych struktur dzięki zastosowaniu krzywych NURBS i reguł dotyczących zakrzywionych powierzchni. Oprócz tego zastosowano program OpenGL dla zbadania systemu symulacji komputerowej 3D przy warunkach VC++.NET, co pozwala na symulację geometrycznego modelu wieloosiowych dzianin osnowowych. Jednocześnie dzięki selekcji komórki podstawowej dzianiny opracowano model takiej komórki podstawowej dla konfiguracji wcześniej opisanej. Określono również zależności pomiędzy parametrami geometrycznymi a zmiennymi procesowymi. Uzyskano teoretyczną objętość włókien, następnie korzystając ze specyfikacji różnego rodzaju próbek określono zależności pomiędzy teoretycznymi i eksperymentalnymi wartościami objętości poszczególnych frakcji włókien. Wyniki wykazały, że istnieje zgodność pomiędzy teoretycznymi i eksperymentalnymi wartościami, co oznacza, że opracowany model jest naukowo uzasadniony i możliwy do stosowania w praktyce.
Źródło:
Fibres & Textiles in Eastern Europe; 2014, 3 (105); 91-97
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The forward-wave and backward-wave behaviors of electromagnetic waves in two-dimensional photonic crystals
Autorzy:
Jiang, P
Yang, H.
Xie, K.
Powiązania:
https://bibliotekanauki.pl/articles/174438.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
forward-wave behavior
backward-wave behavior
negative refraction
phase velocity
finite element method simulation
Opis:
The negative refractions are discussed in detail to demonstrate two different two-dimensional photonic crystal structures that undergo negative refractions associated with the backward-wave and forward-wave phenomenon, respectively. The presentation of the left-handed property of effective negative index photonic crystal is followed by a discussion of a backward flowing phase and causality. The forward-wave negative refraction occurs in photonic crystals as a result of anisotropy. This paper is based on the theoretical analysis and is illustrated with the results of finite element method simulations.
Źródło:
Optica Applicata; 2014, 44, 1; 17-27
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Theoretical analysis of a hollow laser beam transmitting in an off-axis Cassegrain optical antenna system
Autorzy:
Mi, C
Jiang, P
Yang, H.
Ke, S
Li, B
Liu, J.
Powiązania:
https://bibliotekanauki.pl/articles/174358.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
Cassegrain optical antenna
off-axis hollow laser beam
receiving efficiency
Opis:
The optical model of a Cassegrain optical antenna with a confocal double-parabolic reflector structure has been designed, and the propagation characteristics of a hollow laser beam, which could avoid the loss of energy caused by the subreflector center reflection in the optical antenna, has been researched in this paper. By detailed analysis and numerical calculations of a receiving Cassegrain antenna with different deflection angles, the coupling efficiency curve and 3-D distributions of the receiving light intensity for different inclined angles have been obtained.
Źródło:
Optica Applicata; 2014, 44, 3; 421-431
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
3D Simulation of Warp Knitted Structures with a New Algorithm Based on NURBS
Symulacja 3D struktur dzianych z zastosowaniem algorytmu opartego na algorytmie NURBS
Autorzy:
Xu, H Y
Chen, N L
Jiang, J H
Jin, L X
Wang, Z X
Powiązania:
https://bibliotekanauki.pl/articles/232913.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
warp knitted stitch
three-dimensional simulation
NURBS
joint of stitches
MATLAB
ścieg osnowy tkaniny
struktura dzianin
symulacja trójwymiarowy
algorytm NURBS
wspólne szwów
oprogramowanie Matlab
Opis:
In order to obtain a three-dimensional computer simulation of warp knitted structures with more flexibility and realism, a new algorithm using Matlab was developed by NURBS based on empirical geometrical loop models. With the principles of NURBS curves, once the values of data points are known, the control points with two coincidence points at the start and end points can be uncomplicatedly calculated by Matlab. Then the NURBS curve of a single typical stitch can be simulated flexibly by Matlab. A new typical stitch selected from two stitches simulated directly by the new method is redefined to improve the joint of neighboring stitches, and it is found that there are two types of redefined typical warp knitted stitches judged by whether the two under lap on the same side or not. Based on the redefined typical warp knitted stitch, two warp knitted structures are simulated regardless of the loop offset, and all the joints of stitches are smooth.
Przeprowadzono symulację komputerową struktur dzianin w wymiarze 3D, opracowując w tym celu nową procedurę opartą na algorytmie NURBS. Do tego celu wykorzystano oprogramowanie MATLAB. Symulację 3D przeprowadzono w oparciu o procedury numeryczne umożliwiające wykreślenie przestrzennych figur geometrycznych opisujących strukturę dzianin. Symulowano kształt oczek zamkniętych i otwartych podstawowych splotów kolumienkowych trykotu, sukna i aksamitu. W oparciu o 8 punktów referencyjnych zorientowano konfigurację pętli oczka i łącznika w postaci przestrzennej linii eliptycznej. Do zapisu struktury splotu kształtu oczek wykorzystywano aparat matematyczny w postaci macierzy.
Źródło:
Fibres & Textiles in Eastern Europe; 2015, 1 (109); 57-60
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies