Autor: Jeon, M. Y. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Epidemiology of Musculoskeletal Symptoms Among Korean Hospital Nurses
Autorzy:: Smith, D. R.
Choe, M. A.
Jeon, M. Y.
Chae, Y. R.
An, G. J.
Jeong, J. S.
Powiązania:: https://bibliotekanauki.pl/articles/90718.pdf
Data publikacji:: 2005
Wydawca:: Centralny Instytut Ochrony Pracy
Tematy:: musculoskeletal symptoms
nurse
Korea
low back pain
epidemiology
kręgosłup
warunki pracy
ból mięśniowy
personel pielęgniarski
personel pomocniczy służby zdrowia
szpitale
choroby narządów ruchu
wypalenie zawodowe
zmęczenie nerwowe
Opis:: We investigated the epidemiology of musculoskeletal symptoms (MSS) among a complete cross-section of 330 nurses from a large Korean hospital, by means of a questionnaire survey (response rate: 97.9%). The prevalence of MSS at any body site was 93.6%, with symptoms most commonly reported at the shoulder (74.5%), lower back (72.4%), neck (62.7%), lower legs (52.1%) and hand/wrist (46.7%). Logistic regression indicated that nurses who undertook manual handling of patients were 7.2 times as likely to report MSS (OR 7.2, 95%CI 1.2–42.3, P = .0275), while nurses suffering from periodic depression experienced a 3.3-fold MSS risk (OR 3.3, 95%CI 1.3–8.3, P = .0104). Overall, our study suggests that Korean nurses incur a very high MSS burden when compared internationally. A greater commitment is needed to improve physical conditions, occupational tasks and psychosocial work issues among nurses in this country.
Źródło:: International Journal of Occupational Safety and Ergonomics; 2005, 11, 4; 431-440
1080-3548
Pojawia się w:: International Journal of Occupational Safety and Ergonomics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Effect of Laser Preheating AISI 4140 Specimens for Micro-Forging
Autorzy:: Jung, C.
Lee, M. G.
Jeon, Y.
Powiązania:: https://bibliotekanauki.pl/articles/351766.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: laser preheating
micro-forging
fatigue strength
ultrasonic fatigue test
hardness
Opis:: Many high performance and permanent service parts require suitable material characteristics-high fatigue strength is one of the most important characteristics. For this reason, surface treatment processes are essential to increase the material performance and avoid the use of costly ineffective material. There exist various surface treatment processes for various applications. Each process has advantages and disadvantages and hybridization can solve various problems. The micro-forging process delivers a controlled and uniform surface hardness, but the depth of the forged surface is limited. On the other hand, laser heat treatment can increase the hardness drastically, but the surface may become brittle, which reduces the fatigue life. Laser-assisted micro-forging is a novel hybrid process of laser heat treatment and micro-forging that has the potential to increase the forging depth and relax the stress caused by the high temperature of the forging process. This study examines the effect of laser preheating in the micro-forging of AISI 4140. The processes were varied as follows: no treatment, micro-forging only, and laser-assisted micro-forging. The fatigue strength of the specimens was examined by means of an ultrasonic fatigue tester and then compared. The microstructural changes were investigated with respect to the processes by using scanning electron microscopy. In conclusion, it was confirmed that the laser preheating auxiliary forging affects the fatigue life. It was confirmed that the fatigue life was the mostly increased in 550°C temperature laser preheating micro forging process and the temperature was identified as the most important factor.
Źródło:: Archives of Metallurgy and Materials; 2017, 62, 2B; 1209-1213
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Microstructural Characterization Of Laser Heat Treated AISI 4140 Steel With Improved Fatigue Behavior
Charakterystyka mikrostruktury stali AISI 4140 po laserowej obróbce cieplnej i z poprawioną odpornością na zmęczenie
Autorzy:: Oh, M. C.
Yeom, H.
Jeon, Y.
Ahn, B.
Powiązania:: https://bibliotekanauki.pl/articles/355558.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: laser heat treatment
vibration peening
fatigue properties
ultrasonic fatigue test
alloy steel
laserowa obróbka cieplna
wibracje
własności zmęczeniowe
badanie ultradźwiękowe
stal stopowa
Opis:: The influence of surface heat treatment using laser radiation on the fatigue strength and corresponding microstructural evolution of AISI 4140 alloy steel was investigated in this research. The AISI 4140 alloy steel was radiated by a diode laser to give surface temperatures in the range between 600 and 800°C, and subsequently underwent vibration peening. The fatigue behavior of surface-treated specimens was examined using a giga-cycle ultrasonic fatigue test, and it was compared with that of non-treated and only-peened specimens. Fatigue fractured surfaces and microstructural evolution with respect to the laser treatment temperatures were investigated using an optical microscope. Hardness distribution was measured using Vickers micro-hardness. Higher laser temperature resulted in higher fatigue strength, attributed to the phase transformation.
Źródło:: Archives of Metallurgy and Materials; 2015, 60, 2B; 1331-1334
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Fabrication Of Porous Ti By Thermal Decomposition And Sintering Of PMMA/TiH2 Powder Compact
Wytwarzanie porowatego tytanu przez rozkład termiczny i spiekanie wyprasek PMMA/TiH2
Autorzy:: Jeon, K. Ch.
Kim, Y. D.
Suk, M.-J.
Oh, S.-T.
Powiązania:: https://bibliotekanauki.pl/articles/352341.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: porous Ti
PMMA powders
thermal decomposition of TiH2
pore structure
porowaty tytan
PMMA
rozkład termiczny
struktura porów
Opis:: Porous Ti with controlled pore structure was fabricated by thermal decomposition and sintering process using TiH₂ powders and Polymethylmethacrylates (PMMA) beads as pore forming agent. The beads sizes of 8 and 50 μm were used as a template for fabricating the porous Ti. The TiH₂ powder compacts with 20 and 70 vol% PMMA were prepared by uniaxial pressing and sintered for 2 h at 1100°C. TGA analysis revealed that the PMMA and TiH₂ were thermally decomposed at about 400°C forming pores and at about 600°C into metallic Ti phase. The porosity increased with increase in the amount of PMMA addition. Also, the microstructure observation showed that the pore size and shape were strongly dependent on the PMMA shapes.
Źródło:: Archives of Metallurgy and Materials; 2015, 60, 2B; 1375-1377
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Characterization of Cladding Hull Wastes from Used Nuclear Fuels
Charakterystyka odpadów z okładzin reaktora wodnego ciśnieniowego
Autorzy:: Kang, K. H.
Lee, C. H.
Jeon, M. K.
Han, S. Y.
Park, G. I.
Hwang, S.-M.
Powiązania:: https://bibliotekanauki.pl/articles/357036.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: used nuclear fuels
metal waste
cladding hulls
zircaloy
radioactivity
reaktor wodny ciśnieniowy
odpady metalowe
odpady z okładzin
radioaktywność
Opis:: Used cladding hulls from pressurized water reactor (PWR) are characterized to provide useful information for the treatment and disposal of cladding hull wastes. The radioactivity and the mass of gamma emitting nuclides increases with an increase in the fuel burn-up and their removal ratios are found to be more than 99 wt.% except Co-60 and Cs-137. In the result of measuring the concentrations of U and Pu included in the cladding hull wastes, most of the residues are remained on the surface and the removal ratio of U and Pu are revealed to be over 99.98 wt.% for the fuel burn-up of 35,000 MWd/tU. An electron probe micro-analyzer (EPMA) line scanning shows that radioactive fission products are penetrated into the Zr oxide layer, which is proportional to the fuel burn-up. The oxidative decladding process exhibits more efficient removal ratio of radionuclides.
Źródło:: Archives of Metallurgy and Materials; 2015, 60, 2B; 1199-1203
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Influence of InAs Coverage on Transition of Size Distribution and Optical Properties of InAs Quantum Dots
Autorzy:: Kim, G.
Jeon, S.
Cho, M.
Choi, H.
Kim, D.
Kim, M.
Kwon, Y.
Choe, J.
Kim, J.
Leem, J.
Powiązania:: https://bibliotekanauki.pl/articles/1535820.pdf
Data publikacji:: 2010-10
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:: 81.15.Hi
68.37.Ps
78.55.Cr
78.67.Hc
Opis:: The influence of InAs coverage on the formation of self-assembled quantum dots grown by molecular-beam epitaxy was investigated by atomic force microscopy and photoluminescence measurements. As the InAs coverage increased from 2.0 to 3.0 monolayers, the quantum dot density decreased from 1.1 × $10^{11}$ to 1.36 × $10^{10} cm^{-2}$. This result could be attributed to the coalescence of neighboring small InAs quantum dots resulting in the formation of much larger InAs quantum dots with lower quantum dot density. Atomic force microscopy results revealed that as the InAs quantum dot coverage increased, the transition of size distribution of InAs quantum dots from single-modal to multimodal occurred. The temperature-dependent photoluminescence spectra showed that the photoluminescence spectra red shifted and the photoluminescence peak intensity decreased as the InAs coverage increased. The thermal activation energy was strongly dependent on the InAs coverage, and for InAs quantum dots with 3.0 ML thick InAs coverage, this energy was estimated to be 147 meV.
Źródło:: Acta Physica Polonica A; 2010, 118, 4; 673-676
0587-4246
1898-794X
Pojawia się w:: Acta Physica Polonica A
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Multistep Heat-Treatment Effects on Electrospun Nd-Fe-B-O Nanofibers
Autorzy:: Jeon, E. J.
Eom, N. S. A.
Lee, J.
Lee, B.
Cho, H. M.
On, J. S.
Choa, Y.-H
Kim, B. S.
Powiązania:: https://bibliotekanauki.pl/articles/354311.pdf
Data publikacji:: 2018
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: Nd-Fe-B
nanofibers
electrospinning
heat treatment
Opis:: Neodymium-Iron-Boron (Nd-Fe-B) magnets are considered to have the highest energy density, and their applications include electric motors, generators, hard disc drives, and MRI. It is well known that a fiber structure with a high aspect ratio and the large specific surface area has the potential to overcome the limitations, such as inhomogeneous structures and the difficulty in alignment of easy axis, associated with such magnets obtained by conventional methods. I n this work, a suitable heat-treatment procedure based on single-step and multistep treatments to synthesize sound electrospun Nd-Fe-B-O nanofibers of Φ572 nm was investigated. The single-step heat-treated (directly heat-treated at 800°C for 2 h in air) samples disintegrated along with the residual organic compounds, whereas the multistep heat-treated (sequential three-step heat-treated including three steps;: dehydration (250°C for 30 min in an inert atmosphere), debinding (650°C for 30 min in air), and calcination (800°C for 1 h in air)) fibers maintained sound fibrous morphology without any organic impurities. They could maintain such fibrous morphologies during the dehydration and debinding steps because of the relatively low internal pressures of water vapor and polymer, respectively. In addition, the NdFeO₃ alloying phase was dominant in the multistep heat-treated fibers due to the removal of barriers to mass transfer in the interparticles.
Źródło:: Archives of Metallurgy and Materials; 2018, 63, 3; 1433-1437
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Jeon, M. Y." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język