Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Ismail, R.A." wg kryterium: Autor


Wyświetlanie 1-8 z 8
Tytuł:
Effect of annealing temperature on the optical properties of ZnO nanoparticles
Autorzy:
Ismail, R. A.
Habubi, N. F.
Abid, H. R.
Powiązania:
https://bibliotekanauki.pl/articles/412203.pdf
Data publikacji:
2014
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
nanoparticles
ZnO film
optical properties
drop casting technique
Opis:
In this work, ZnO films were prepared by drop casting technique. The films were deposited on quartz substrates under different annealing time (15,30,45 and 60 min.) at a constant temperature (800 °C). The optical properties were achieved by measuring the absorbance and transmittance spectra in the wavelength range (200-900) nm. It was found that the absorbance decreases while transmission increases as the annealing time increases, while the reflectance decreases as the annealing time increases. The optical measurements indicate the kind of transition which was a direct allowed with an average band gap energies lie between 3.3 eV and 3.54 eV with the change of annealing time.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2014, 4; 37-47
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication and characterization of porous silicon layer prepared by photo-electrochemical etching in CH3OH:HF solution
Autorzy:
Hadi, H.A.
Ismail, R.A.
Habubi, N.F.
Powiązania:
https://bibliotekanauki.pl/articles/412262.pdf
Data publikacji:
2013
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
porous silicon
photo-electrochemical etching (PECE)
porosity
thickness
XRD
AFM
Opis:
Porous silicon (PS) has been fabricated by Photo-electrochemical etching. Porous silicon was anodized on n-type Si in light using a current density of 20mA/cm2 for 10 min. The porous structure formation was confirmed using XRD and AFM studies. The root mean square (RMS) roughness of the Porous silicon layer is found to be around 47.5 nm and the ten point height was 317 nm. The average of pores diameter was 419.98nm, and the grain growth is columnar with a (211) preferred orientation. The grain size of the PS was estimated from the Scherer's formula and found to be 73 nm. All the properties of the porous silicon layer, such as porosity and the thickness depend on the anodization parameters. The porosity (P) was approximately 77 %. The thickness of the layer formed during an anodization in constant current was 3.54nm in gravimetric method, while its value was 1.77nm by using the theoretical relation.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2013, 3; 29-36
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermodynamic assessment of thermochemical cycle for hydrogen production based on water decomposition with binary copper chlorine couple
Autorzy:
Benbrika, Omar
Bensenouci, Ahmed
Tegar, Mohamed
Ismail, Kamal R.A.
Powiązania:
https://bibliotekanauki.pl/articles/2204067.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
hydrogen production
thermochemical process
copper-chlorine cycle
water
dissociate
exergy
energy
analys
Opis:
The present study aims at investigating and simulating the hydrogen cycle production at low temperatures using thermochemical reactions. The cycle used in this work is based on the dissociation of water molecules depending on a copper chlorine couple. Furthermore, the proposed method uses mainly thermal energy provided by a solar thermal field. This proposed cycle differs from what is found in the literature. However, most of the thermochemical cycles for hydrogen production work at quite high temperatures which is a technical challenge. Therefore, the maximum temperature used in the present cycle is limited to 500◦C. A thermodynamic analysis based on both the first and second laws is performed to evaluate the energy, exergy and efficiency of each reaction as well as the overall exergetic efficiency of the system. Furthermore, a parametric study is conducted to figure out the impact of the surrounding temperatures on the overall exergetic efficiency using commercial energy simulation software. The results show that the cycle can achieve an exergy efficiency of 30.5%.
Źródło:
Archives of Thermodynamics; 2022, 43, 4; 109--133
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Spatial and temporal variations of sedimentation rate in the Timah Tasoh Water Reservoir, Perlis, Malaysia
Analiza przestrzenna i czasowa zmiennosci ilosci sedymentu w zbiorniku Timah Tasoh, Perlis w Malezji
Autorzy:
Rahaman, Z A
Ismail, W.R.
Powiązania:
https://bibliotekanauki.pl/articles/81815.pdf
Data publikacji:
2010
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
spatial analysis
temporal analysis
variation
sedimentation rate
sediment discharge
Timah Tasoh Reservoir
Perlis
Malaysia
Opis:
Human activities such as logging, land conservation, road construction and other disturbances in watersheds will increase erosion rate and thus the amount of sediment transported into the river that reaches lakes, reservoirs and sea. Accelerated sedimentation rate in the reservoir can signifi cantly reduce a reservoir’s surface area, eliminating wetland area surrounding the reservoir and shallow the areas near the shore of the reservoir. A study of sedimentation rate in the Timah Tasoh water reservoir was carried out from May 2001 to April 2002 by means of sediment traps. The aim of this study is to determine the spatial and temporal pattern of sedimentation rates in the reservoir. The sediment traps were installed at five different locations in the reservoir and replaced every month. Gross sedimentation rates measured in the sediment traps vary from about an average of 1.4 kg/m2/month or 16.3 kg/m2/yr in the deepest part of the reservoir to about 79.2 kg/m2/yr (monthly average of 6.6 kg/m2/month) and 47.1 kg/m2/yr (monthly average of 3.9 kg/m2/month) near the inlet of the Pelarit River and the Tasoh River respectively. The sedimentation rate near the Pelarit River and the Tasoh River inflow is correlated with the water and suspended sediment discharge in the river, owing to its proximity to the rivers and the fl ooding effect, mainly during the wet season. The sedimentation rate decreases southward along the reservoir, as a result of increasing distance from the river mouth. The total suspended sediment load of the Upper Pelarit River and the Jarum River flowing into the reservoir is 11.4 × 103 ton/year and 5.41 × 103 ton/ /year respectively.
Na podstawie szczegółowych łapaczkowych pomiarów terenowych przedstawiono zmiany przestrzenne i czasowe (2001–2002) ilości sedymentu w zbiorniku wodnym Timah Tasoh w Malezji. Łapaczki umieszczone w pięciu punktach zbiornika opróżniano co 5 miesięcy. Zmiany ilości sedymentu wykazano liczbowo na tle ilości dostarczanego rumowiska do zbiornika z rzek Pelarit oraz Jarum.
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation; 2010, 42, 1; 127-138
0208-5771
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The simulation of performance characteristics of port injection dedicated compressed natural gas spark ignition engine
Autorzy:
Semin, Semin
Abu Bakar, R.
Ismail, A.
Powiązania:
https://bibliotekanauki.pl/articles/950139.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
CNG engine
computational modelling
engine performance
port/sequential injection
Opis:
This paper presents the computational modelling simulation results of port/sequential injection dedicated compressed natural gas (CNG) spark ignition engine to investigate and evaluate the engine performance while base engine converted by using compressed natural gas as an alternative fuel. The baseline engine in this research is four stroke direct injection diesel engine. The computational modelling design and development has performed using GT-Power software at Automotive Excellent Centre Laboratory, Faculty of Mechanical Engineering, University Malaysia Pahang, Malaysia. To investigate the engine performance, the engine computational model is operated between 500-4000 rpm, under steady state condition. In this research, the sequential injection dedicated compressed natural gas spark ignition engine performance investigation results such as torque, power, fuel consumption pressure and exhaust gas emissions were investigated and compared to base diesel engine performance. From the CNG engine computational modelling simulation results are shown that by development of sequential injection dedicated compressed natural gas spark ignition engine has a potential to reduce the engine emissions. Unfortunately, the development of sequential injection dedicated compressed natural gas spark ignition engine can be reducing the engine performance. However, the study of required to improve the performance of sequential injection dedicated compressed natural gas spark ignition engine has a potential of reducing engine.
Źródło:
Journal of KONES; 2008, 15, 2; 427-432
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Neural-sliding mode augmented robust controller for autolanding of fixed wing aircraft
Autorzy:
Ismail, I.
Pashilkar, A. A.
Ayyagari, R.
Sundararajan, N.
Powiązania:
https://bibliotekanauki.pl/articles/91533.pdf
Data publikacji:
2012
Wydawca:
Społeczna Akademia Nauk w Łodzi. Polskie Towarzystwo Sieci Neuronowych
Tematy:
controller
nonlinear dynamic inversion
control signal
phase compensator
antiwindup scheme
wing aircraft
autolanding
Opis:
Neural and sliding mode controllers are generally based on the principle of nonlinear dynamic inversion. This leads to control signals containing high frequency components. This can result in actuator rate limiting due to loss of phase at higher frequencies. Large control inputs, for example due to the saturation component of the sliding mode controller can also result in position saturation of the actuator. In this paper we show that by the introduction of suitable phase compensators and an antiwindup scheme the neuralaided sliding mode controller performance can be improved. A novel scheme is proposed for the cascaded feedback controller which addresses practical requirements of both state limiting and control surface saturation respectively.
Źródło:
Journal of Artificial Intelligence and Soft Computing Research; 2012, 2, 4; 317-330
2083-2567
2449-6499
Pojawia się w:
Journal of Artificial Intelligence and Soft Computing Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Xerophiles and other fungi associated with cereal baby foods locally produced in Uganda
Autorzy:
Ismail, M.A.
Taligoola, H.K.
Nakamya, R.
Powiązania:
https://bibliotekanauki.pl/articles/67513.pdf
Data publikacji:
2012
Wydawca:
Polskie Towarzystwo Botaniczne
Tematy:
fungi
cereal product
baby food zob.child food
child food
food product
production
Uganda
xerophilic fungi
mycobiota
spoilage
contamination
Opis:
Fifty samples from five baby food products mainly made of cereal flour(s) were analyzed. The moisture contents of these products were between 11.14% and 11.9%, a level below 14.0%, the recommended level for safe storage of cereal grains and their products. The mycological analysis was carried out using the dilution plate method and two isolation media (DG18 for isolation of xerophilic fungi and DRBC for fungi in general). A total of 80 species related to 37 genera in addition to some unidentified fungal and yeast species were recorded on both media from the five products. The products were contaminated abundantly by xerophilic fungi which were occurring in 88% of food samples and accounting for 18.1% of the total CFU as recorded on DG18. The highest contamination level by xerophiles was registered in Mwebaza rice porridge (a component of rice flour) and the lowest in Mukuza (a product of maize, soyabean and sorghum flours). 11 xerophilic species were recorded of which Aspergillus and Eurotium (4 species each) were the predominant giving rise to 9.1% and 8.9% of the total CFU, with A. wentii, A. candidus, E. cristatum and E. repens were the most contaminating species. Of the fungi recorded other than xerophiles, species of Aspergillus (particularly A. flavus followed by A. niger), Penicillium (P. citrinum, P. oxalicum), Fusarium (F. solani, F. tricinctum), Cladosporium (C. sphaerospermum) and yeasts were the most predominant. Contamination of such foods is a matter of health hazard as these foods are for babies. So, the use of fresh, well-dried and uncontaminated flours for production of such foods is recommended.
Źródło:
Acta Mycologica; 2012, 47, 1
0001-625X
2353-074X
Pojawia się w:
Acta Mycologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ultrasonic-assisted synthesis of reactive carboxymethyl cellulose stabilized nano zero-valent iron and its application for removal of Cr6+ and Cu2+ ions
Autorzy:
Ayob, A.
Santiagoo, R.
Amneera, W. A.
Ismail, N.
Abdullah, A. Z.
Powiązania:
https://bibliotekanauki.pl/articles/207403.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
high resolution transmission
electron microscopy
light scattering
transmission electron microscopy X ray diffraction
zero-valent iron
wysoka rozdzielczość transmisyjna
mikroskopia elektronowa
dyfrakcja rentgenowska
żelazo
Opis:
Carboxymethyl cellulose (CMC) was used in the chemical reduction using sodium borohydride to yield dispersive nano zero-valent iron (nZVI) particles as reactive and stable adsorbents. CMC- -stabilized nZVI particles were characterized via UV-visible light spectroscopy, X-ray diffraction, dynamic light scattering, transmission electron microscopy, and specific surface area assisted using a probe ultrasonication dispersing tool at 50% amplitude power. High catalytic reactivity obtained in pseudo-first order reaction for Cr6+ (rate constant K1 = 0.0311 min–1) and pseudo-second order for Cu2+ (rate constant K2 = 0.0946 g·mg–1·min–1) indicated that colloidal stability of nZVI particles can be achieved with a stabilizer for the removal of toxic contaminants.
Źródło:
Environment Protection Engineering; 2016, 42, 2; 55-79
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-8 z 8

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies