Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Hui, Z" wg kryterium: Autor


Wyświetlanie 1-4 z 4
Tytuł:
Polarity-reversed ultra-wideband monocycle pulse generation with dual-channel multicasting in a photonic crystal fiber
Autorzy:
Gong, J
Hui, Z
Powiązania:
https://bibliotekanauki.pl/articles/173791.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
nonlinear optics
cross-phase modulation (XPM)
radio frequency photonics
ultra-wideband (UWB)
photonic crystal fiber (PCF)
Opis:
This paper proposes and demonstrates a novel scheme of a two-channel-output ultra-wideband monocycle pulse generator consisting of a 100 m dispersion-flattened highly nonlinear photonic crystal fiber and two optical bandpass filters. Based on the cross-phase modulation effect in a dispersion-flattened highly nonlinear photonic crystal fiber, two polarity-reversed ultra-wideband monocycle pulses simultaneously output from two different channels are successfully achieved by appropriately locating the probe wavelength at the left linear slope and the right linear slope of the two optical bandpass filters transmission spectra, respectively. The full width at half-maximum and a fractional bandwidth of 24 ps and 260% for a positive pulse, 24 ps and 251% for a negative pulse are obtained. Moreover, the influences of input signal powers, the polarization misalignment between the data light and the continuous wave probe light, and probe wavelength variation on the double output ultra-wideband signals quality are also investigated. The results show that the system has some tolerance to both the input signal power fluctuation and the slight polarization mismatch and even can efficiently operate with a widely tunable wavelength range. This makes it very attractive for engineering applications in future multiuser ultra-wideband-over-fiber communication systems.
Źródło:
Optica Applicata; 2015, 45, 1; 25-39
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
2D Cadastral Coordinate Transformation using extreme learning machine technique
Autorzy:
Ziggah, Y. Y.
Issaka, Y.
Laari, P. B.
Hui, Z.
Powiązania:
https://bibliotekanauki.pl/articles/145372.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
transformacja współrzędnych
sieci neuronowe
dane geodezyjne
sieć radialna
coordinate transformation
extreme learning machine
backpropagation neural network
radial basis function neural network
geodetic datum
Opis:
Land surveyors, photogrammetrists, remote sensing engineers and professionals in the Earth sciences are often faced with the task of transferring coordinates from one geodetic datum into another to serve their desired purpose. The essence is to create compatibility between data related to different geodetic reference frames for geospatial applications. Strictly speaking, conventional techniques of conformal, affine and projective transformation models are mostly used to accomplish such task. With developing countries like Ghana where there is no immediate plans to establish geocentric datum and still rely on the astro-geodetic datums as it national mapping reference surface, there is the urgent need to explore the suitability of other transformation methods. In this study, an effort has been made to explore the proficiency of the Extreme Learning Machine (ELM) as a novel alternative coordinate transformation method. The proposed ELM approach was applied to data found in the Ghana geodetic reference network. The ELM transformation result has been analysed and compared with benchmark methods of backpropagation neural network (BPNN), radial basis function neural network (RBFNN), two-dimensional (2D) affine and 2D conformal. The overall study results indicate that the ELM can produce comparable transformation results to the widely used BPNN and RBFNN, but better than the 2D affine and 2D conformal. The results produced by ELM has demonstrated it as a promising tool for coordinate transformation in Ghana.
Źródło:
Geodesy and Cartography; 2018, 67, 2; 321-343
2080-6736
2300-2581
Pojawia się w:
Geodesy and Cartography
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Motion Center in Quantum Wave Packet Dynamics
Autorzy:
Liu, Qian
Yu, Yanxia
Pan, Hui
Wang, Z.
Powiązania:
https://bibliotekanauki.pl/articles/1398933.pdf
Data publikacji:
2015-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
71.70.Di
73.43.-f
03.65.Ta
03.65.Sq
Opis:
We seek for an oscillating center solution of the wave function satisfying the Schrödinger equation for a nonrelativistic charge particle in an arbitrary external field, where the oscillating center of physical system is a motion governing by a guidance formula of the classical mechanics and at the same time, the physical system obeys the rule of quantum mechanics. In terms of our approach, one enables to know how quantum process may actually come about. The results are applied to analyze the Landau level. We explain successfully that the orbit of oscillator center for the Landau level is circle.
Źródło:
Acta Physica Polonica A; 2015, 127, 3; 761-766
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Relationship between fracture toughness and temperature in epoxy coatings
Odporność powłok epoksydowych na kruche pękanie w funkcji temperatury
Autorzy:
Bo, Z.
Jing-wei, L.
Shu-guang, L.
Yi-hui, L.
Ju-tao, H.
Powiązania:
https://bibliotekanauki.pl/articles/946951.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
epoxy resin
fracture toughness
żywica epoksydowa
kruche pękanie
Opis:
The fracture toughness KIC of nine kinds of epoxy coating specimens was tested in the temperature range from 20 to -40 °C, and the influence of temperature on KIC was discussed. The results showed that KIC decreases sharply in unmodified systems but increases for some specimens with 20—50 portions of rubber impact modifier. The elastic modulus test indicated that KIC is closely related with the modulus. Scanning Electron Microscopy images showed that the introduction of impact modifier to epoxy can enlarge the ductile deformation of the fracture surface. As a result, the addition of rubber modifier is a suitable path to improve the anti-cracking performance of epoxy coatings at low temperature due to an increase of fracture toughness and reduction of elastic modulus, which thus can reduce the thermal stress in the process of cooling.
Zbadano odporność na kruche pękanie (KIC) dziewięciu rodzajów powłok epoksydowych w zakresie temperatury -40—20 °C. Wyniki badań wskazują, że wartość KIC powłok epoksydowych bez udziału modyfikatora (polimeru uretanowego DESMOCAP 11) zmniejsza się gwałtownie wraz z obniżeniem temperatury. Dodatek modyfikatora, w ilości 20—50 g/100 g żywicy, zwiększa odporność powłok na kruche pękanie. Na podstawie analizy SEM stwierdzono, że wprowadzenie do żywicy epoksydowej modyfikatora DESMOCAP 11 powoduje zmniejszenie deformacji plastycznej powierzchni powłoki poddanej uderzeniu. Wykazano też, że obecność modyfikatora powoduje zmniejszenie wartości modułu Younga i wpływa korzystnie na odporność powłok epoksydowych na naprężenie termiczne związane z procesem chłodzenia.
Źródło:
Polimery; 2015, 60, 4; 258-263
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-4 z 4

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies