Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Hashemi, S. M." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Two-zone simulation of an axial vane rotary engine cycle
Autorzy:
Mirzaei, M.
Hashemi, S. M.
Saranjam, B.
Binesh, A.
Powiązania:
https://bibliotekanauki.pl/articles/1839849.pdf
Data publikacji:
2021
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
model spalania
silnik obrotowy
zapłon iskrowy
two-zone combustion model
axial vane rotary engine
burned zone
unburned zone
engine simulation
Opis:
An axial vane rotary engine (AVRE) is a novel type of rotary engines. The engine is a positive displacement mechanism that permits the four “stroke” action to occur in one revolution of the shaft with a minimum number of moving components in comparison to reciprocating engines. In this paper, a two-zone combustion model is developed for a spark ignition AVRE. The combustion chamber is divided into burned and unburned zones and differential equations are developed for the change in pressure and change in temperature in each zone. The modelling is based on equations for energy and mass conservation, equation of state, and burned mass fraction. The assumption is made that both zones are at the same pressure P, and the ignition temperature is the adiabatic flame temperature based on the mixture enthalpy at the onset of combustion. The developed code for engine simulation in MATLAB is applied to another engine and there is a good agreement between results of this code and results related to the engine chosen for validation, so the modelling is independent of configuration.
Źródło:
International Journal of Applied Mechanics and Engineering; 2021, 26, 2; 143-159
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization and concentration studies of Jalal Abad iron mine
Charakterystyka i badania koncentracji w kopalni rud żelaza Jalal Abad
Autorzy:
Hashemi, S. A.
Rezai, B.
Tavakoli Mohammadi, M. R.
Javanshir, S.
Powiązania:
https://bibliotekanauki.pl/articles/219259.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
kopalnia rud żelaza Jalal Abad
charakterystyka
rurka Davisa
separacja magnetyczna
Jalal Abad iron mine
characterization
Davis tube
magnetic separation
Opis:
Characterization and determination of liberation degree are the first stages of ore dressing. Block 4 of Jalal Abad mine, Kerman province, Iran, has three kinds of iron ores; D1, D2 and D3, with different grades. In this research, chemical analysis, mineralogy, liberation degree and magnetic enrichment studies were done by XRF, XRD, microscopic sections and Davis tube, respectively. The results indicated that D1, D2 and D3 had average iron grades of 58, 52 and 38%, respectively. The minerals of Magnetite, Hematite, Dolomite, Calcite and Quartz were distinguished. Average liberation degree was estimated about 500 μm by Microscopic studies. The results of magnetic tests showed that iron grade of D1, D2 and D3 concentrates increased to 70.46, 63.98 and 45.37%, respectively. The optimization of blending was investigated for production of accumulated concentrate with desirable iron grade (68%) using MATLAB software.
Charakterystyka i określenie stopnia uwalniania to pierwsze etapy w procesie oczyszczania rud. W bloku 4 kopalni rud żelaza Jalal Abad w prowincji Kerman w Iranie, znajdują się trzy rodzaje złóż rud żelaza: D1, D2, D3, różnej klasy. W pracy tej przedstawiono wyniki analizy chemicznej, mineralogicznej, stopnia uwalniania oraz separacji magnetycznej wykonanych przy zastosowaniu metod XRF, dyfrakcji (XRD) oraz metod mikroskopowych i rurki Davisa. Wyniki analiz wskazują, że złoża D1, D2, D3 to złoża w klasie o zawartości odpowiednio 58, 52 i 38%. W próbkach określono zawartość magnetytu, hematytu, dolomitu, kalcytu oraz kwarcu. Średni poziom uwalniania określony przy pomocy metod mikroskopowych oszacowano na 500 μm. Wyniki badań magnetycznych wskazują, że zawartości żelaza w koncentracie D1,D2 i D3 wzrosły odpowiednio do 70.46, 63.98 i 45.37%. Przeprowadzono optymalizację mieszania koncentratów w celu produkcji końcowego koncentratu o pożądanym poziomie zawartości żelaza (68%) przy zastosowaniu oprogramowania MATLAB.
Źródło:
Archives of Mining Sciences; 2013, 58, 3; 729-745
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of external wedge on the photoneutron dose equivalent at a high energy medical linac
Autorzy:
Hashemi, , S. M.
Raisali, G.
Taheri, M.
Majdabadi, A.
Ghafoori, M.
Powiązania:
https://bibliotekanauki.pl/articles/147071.pdf
Data publikacji:
2011
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
photoneutron
linac
polycarbonate (PC)
external wedge
radiotherapy
Opis:
Medical linacs used in radiotherapy produce bremsstrahlung spectra. In the energy range from 8 to 25 MV medical linacs produce, besides the clinically useful electron and photon beams, secondary neutrons. The aim of this study was to investigate the effect of an external wedge filter on the photoneutron dose equivalent produced by a medical linac at patient plane. Polycarbonate (PC) films were used for the determination of photoneutron dose equivalent produced by a Varian 2100 C/D linac working at 18 MV photon mode. Neutron dose equivalent was measured at distances 0, 10, 20 and 50 cm from the center of the X-ray beam for open field and after inserting a wedge filter. It was noted that by inserting the external wedge in the path of the X-ray beam, the photoneutron dose equivalent was increased compared to open field. It can be concluded that an external wedge, made from heavy materials may act like the other components of linac head, producing undesired photoneutrons and thus increasing patient dose.
Źródło:
Nukleonika; 2011, 56, 1; 49-51
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies