Autor: Hasan, M. M. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Parametric studies on split S-shaped composite meta atom for X-band communication
Autorzy:: Hasan, M. M.
Faruque, M. R. I.
Islam, M. T.
Powiązania:: https://bibliotekanauki.pl/articles/200602.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: Capacitance
DNG
inductance
meta-atom
indukcyjność
meta atom
Opis:: The aim of this paper is to describe a split S-shaped composite meta atom which shows double negative characteristics at resonance frequency. The proposed meta-atom structure exhibits an almost 3.70 GHz bandwidth when the operating frequency from 8 to 14 GHz (X-band). In this study, the ring width, split width, size of substrate material, and the substrate material itself are varying to investigate their effect on the resonance frequencies. Metal strips of the outer resonator are the splits and the inner ring resonator is designed in a way that it forms a split S-shaped structure on the epoxy resin fibre (FR-4) substrate material. The CST Microwave Studio electromagnetic simulator software was used for the design and simulation purposes, and an Agilent N5227A vector network analyser was used for practical measurements.
Źródło:: Bulletin of the Polish Academy of Sciences. Technical Sciences; 2017, 65, 4; 533-539
0239-7528
Pojawia się w:: Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Influence of Fibre Length and Preparation on Mechanical Properties of Carbon Fibre/Polyamide 6 Hybrid Yarns and Composites
Wpływ długości i przygotowania włókien na mechaniczne właściwości hybrydowych przędz z włókien węglowych i poliamidowych oraz wykonanych z nich kompozytów
Autorzy:: Hengstermann, M.
Hasan, M. M. B.
Abdkader, A.
Cherif, C.
Powiązania:: https://bibliotekanauki.pl/articles/233240.pdf
Data publikacji:: 2016
Wydawca:: Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:: carbon staple fibre
hybrid yarn
carding
spinning
composites
włókno węglowe
przędza hybrydowa
kompozyty
zgrzeblanie
Opis:: The aim of this paper was to investigate the effect of carbon fibre (CF) length and preparation prior to carding on the mechanical properties of hybrid yarns as well as composites consisting of CF and polyamide 6 (PA 6). The hybrid yarns are manufactured using an optimised process route of carding and drawing with a flyer machine from virgin staple CF (40/60/80/100 mm) and PA 6. In order to explore the effect of fibre preparation on the mechanical properties of hybrid yarns as well as composites, virgin staple CF and PA 6 fibres were prepared by varying the mixing type prior to the carding process. For this purpose, the fibres were mixed either by a fibre-opening device or supplied directly to the carding machine without prior mixing. The CF content of the card webs produced is kept at 50 volume %. Hybrid yarns were produced with a twist of 102 twist/m and then thermoplastic uni-directional (UD) composites were manufactured from them. The investigations revealed the influence of the input CF length and mixing type on the mechanical properties of hybrid yarns and thermoplastic UD composites.
Celem badań było stwierdzenie wpływu długości włókien węglowych i ich obróbki przed zgrzebleniem na mechaniczne właściwości przędz hybrydowych/włókno węglowe /poliamid 6/ jak również kompozytów z nich wykonanych. Zmieniano skład mieszanki przed zgrzebleniem. Włókna mieszano lub dostarczano bezpośrednio do zgrzeblenia. Zastosowano zoptymalizowany proces zgrzeblenia i rozciągania z użyciem niedoprzędzarki. Przędze hybrydowe posiadały skręt 102 skręty/m. Z przędz hybrydowych produkowano termoplastyczne kompozyty „jednokierunkowe”. Badania wykazały wpływ parametrów wejściowych na końcowe właściwości kompozytów.
Źródło:: Fibres & Textiles in Eastern Europe; 2016, 5 (119); 55-62
1230-3666
2300-7354
Pojawia się w:: Fibres & Textiles in Eastern Europe
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Development of a Method for Characterization of the Fibre Length of Long Staple Carbon Fibres Based on Image Analysis
Opracowanie metody dla charakteryzacji długości węglowych włókien ciętych o dużej długości
Autorzy:: Hengstermann, M.
Bardl, G.
Rao, H.
Abdkader, A.
Badrul Hasan, M. M.
Cherif, C.
Powiązania:: https://bibliotekanauki.pl/articles/233180.pdf
Data publikacji:: 2016
Wydawca:: Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:: carbon fibre
fibrogram
span length diagram
staple length
włókno węglowe
Opis:: For the manufacturing of load-bearing carbon fibre reinforced plastics (CFRP) made from staple carbon fibres (CF) , statements of the CF fibre length in the composite are essential. However, no suitable fibre length measuring method is currently available for long staple CF over 60 mm. The aim of this study is the development of an effective method for characterization of the fibre length distribution of long staple CF. For this method, a fibre beard specimen is extracted from a sliver manufactured from 80 mm staple CF, which is then scanned. Greyscale values densities (GD) of the individual length classes are determined from the scanned images, which correspond to the number of fibres per length class. From the proportion of all length classes, a span length diagram and staple fibre length diagram can be compiled. The results show the good potential of the method developed for the fibre length measurement of long staple CF.
Dla wytwarzania kompozytów ze wzmocnieniem włókien węglowych bardzo ważna jest znajomość rozkładu długości tych włókien. Niestety, jak dotychczas nie istniały odpowiednie metody pomiarowe pozwalające charakteryzować włókna odcinkowe o długościach powyżej 60 mm. Celem pracy była analiza istniejących metod pomiarowych oraz opracowanie metody, która umożliwiłaby satysfakcjonujące rozwiązanie tego zagadnienia. Zostały przedstawione zasady działania tej metody oraz uzyskana dokładność pomiarów.
Źródło:: Fibres & Textiles in Eastern Europe; 2016, 4 (118); 39-44
1230-3666
2300-7354
Pojawia się w:: Fibres & Textiles in Eastern Europe
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Measurement methods of dynamic yarn tension in a ring spinning process
Metody pomiaru naprężeń przędz w stanie dynamicznym w przędzarce obrączkowej
Autorzy:: Hossain, M.
Abdkader, A.
Nocke, A.
Unger, R.
Krzywinski, F.
Hasan, M. M. B.
Cherif, C.
Powiązania:: https://bibliotekanauki.pl/articles/232351.pdf
Data publikacji:: 2016
Wydawca:: Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:: balloon tension
ring spinning
winding tension
measurement method
przędzenie obrączkowe
naprężenie przędzy
strefa skręcania
strefa balonu
metoda pomiaru
Opis:: The most common measuring method to characterise the dynamic yarn path in the ring spinning process is to measure the yarn tension, where the yarn path is almost straight. However, it is much more complex to measure the yarn tension at the other positions, for example, between the yarn guide and traveller (balloon zone) and between the traveller and winding point of the cop (winding zone), as the yarn rotates continuously around the spindle axis. In this paper, two new methods of yarn tension measurement in the balloon zone are proposed. In the first method, the balloon shape was first recorded with a high speed camera. The balloon tension was then calculated by comparing the yarn strain (occurring in the balloon zone) measured by a digital image analysis program with the stress-strain curve of the yarn produced. In the second method, the radial forces of the rotating balloon were measured by using modified measurement techniques for measurement of yarn tension. Moreover a customised sensor was developed to measure the winding tension between the traveller and cop. The values measured were validated with a theoretical model and a good correlation between the measured and theoretical values could be revealed.
Najczęściej stosowaną metodą pomiarową dla scharakteryzowania dynamiki przędzy podczas przędzenia obrączkowego jest pomiar naprężenia przędzy w miejscu gdzie jej przebieg jest prawie prostoliniowy. Jednakże znacznie bardziej skomplikowany jest pomiar naprężenia przędzy pomiędzy prowadnikiem i biegaczem (strefa balonu) oraz pomiędzy biegaczem i punktem skręcania przed cewką nawojowa (strefa skręcania) ponieważ przędza wiruje w sposób ciągły wokół osi wrzeciona. W pracy przedstawiono dwie nowe metody pomiaru naprężenia przędzy w strefie balonu. W pierwszej wstępnie określano kształt balonu za pomocą kamery o dużej prędkości powtarzania. Następnie określano naprężenie balonu przez porównanie odkształceń przędzy powstających w strefie balonu a mierzonych za pomocą cyfrowej analizy obrazu i programu wykorzystującego krzywą zależności naprężenie-odkształcenie produkowanej przędzy. W drugiej metodzie promieniowe siły wirującego balonu były mierzone przy zastosowaniu zmodernizowanej techniki pomiaru naprężenia przędzy. Pomierzone wartości były porównywane z wartościami modelu teoretycznego przy czym stwierdzono istnienie bardzo dobrej korelacji.
Źródło:: Fibres & Textiles in Eastern Europe; 2016, 1 (115); 36-43
1230-3666
2300-7354
Pojawia się w:: Fibres & Textiles in Eastern Europe
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Prediction of protein subcellular localization using support vector machine with the choice of proper kernel
Autorzy:: Hasan, M.A.M.
Ahmad, S.
Molla, M.K.I.
Powiązania:: https://bibliotekanauki.pl/articles/81150.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: subcellular localization
protein
prediction
support vector machine
model selection
kernel
radial base function
Źródło:: BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2017, 98, 2
0860-7796
Pojawia się w:: BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: The global influence of local symmetry on entropy of the Universe
Autorzy:: Majka, M.
Gajewski, M.
Hasan, M. K.
Majka, T. M.
Powiązania:: https://bibliotekanauki.pl/articles/134889.pdf
Data publikacji:: 2016
Wydawca:: Tomasz Mariusz Majka
Tematy:: local symmetry
global symmetry
gravitational entropy
point symmetry
Opis:: Space and matter were created in the Big Bang. Since Big Bang, the Universe has been expanding continually by increasing its entropy. The fundamental forces broke their symmetries, making impossible to unify them together. Nevertheless, the symmetry of the Universe has not changed and interestingly will never. By analysing global and local symmetry, this paper will present a hypothesis on the future shape and energy expansion of the Universe. A new theory of point symmetry of the Universe will also be introduced.
Źródło:: Journal of Education and Technical Sciences; 2016, 3, 1; 5-7
2300-7419
2392-036X
Pojawia się w:: Journal of Education and Technical Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Investigating the effects of nano-blast furnace slag powder on the behaviour of composite cement materials
Autorzy:: Kadhim, M. J.
Hasan, L. M.
Kamal, H. M.
Powiązania:: https://bibliotekanauki.pl/articles/24200642.pdf
Data publikacji:: 2023
Wydawca:: Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:: environmentally friendly cement
nano-blast furnaces slag
cement substitute
compressive strength
water absorption
cement
żużel wielkopiecowy
substytut cementu
wytrzymałość na ściskanie
absorpcja wody
Opis:: Purpose Attributable to the depletion of raw materials and for sustainability purposes in construction works. Therefore, this study looked into the effects of nano blast furnace slag (BFS) on the microstructure, mechanical properties, and durability of mortar. BFS was substituted for cement at various weight percentages of 0, 1, 1.5, 3, 5, and 7%. Design/methodology/approach A suspension of water and Nano blast furnace slag was made using ultrasonic mixers to prepare the samples. The suspension was combined with cement and sand using 1 cement, 0.5 water, and 2.75 sand in the mixture to make cement mortar. The mixture was then shaped, left in the mould for 24 hours, and then allowed to cure for 7, 14, 28, 60, and 91 days. SEM was used to investigate the microstructure before and after cement replacement. The mechanical characteristics were evaluated by testing the compressive strength and the surface hardness. While the durability was assessed using the water absorption ratios. Findings The results revealed that increasing the BFS in the mortar improved mechanical characteristics and durability by up to 3% of BFS. Replacing Nano-blast furnace slag for a portion of the cement is a proposed solution to address the problems of environmental pollution and resource consumption caused by cement production. Research limitations/implications Another sustainable material needs to be used for additional investigation. We may evaluate more properties and use different weight percentages. Practical implications Each year, a significant amount of slag is produced as a result of the iron industry, endangering the environment. There have been numerous initiatives to reduce slag’s negative environmental consequences. Using slag to replace some of the cement is one of the options to eliminate this byproduct and reduce excessive cement use. Originality/value This study investigates the possibility of using a blast furnace blast within the Nanoscale to replace some of the cement used in the construction due to the positive impact on the environment to get rid of industrial byproducts and decrease the use of cement.
Źródło:: Journal of Achievements in Materials and Manufacturing Engineering; 2023, 116, 1; 5--10
1734-8412
Pojawia się w:: Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: A cross sectional survey on health and nutritional status among the people of Chittagong city corporation, Bangladesh
Autorzy:: Jakaria, M.
Hasan, M.
Hossain, M.S.
Hasanat, A.
Sayeed, M.A.
Powiązania:: https://bibliotekanauki.pl/articles/1917281.pdf
Data publikacji:: 2015
Wydawca:: Uniwersytet Medyczny w Białymstoku
Tematy:: Health
Chittagong city
nutritional status
survey
Respondents
Opis:: Purpose: To determine the health and nutritional status of people in the Chittagong city corporation area of Bangladesh. Materials and methods: A face-to-face interview methodology was used for this survey. The study sites were located in 15 thanas of the Chittagong city corporation area. The study was also designed with interview questions closely related to health.Results: Among the total 620 respondents, 453 respondents were males and 167 respondents were females. 471(75.96%) of the total respondents had positive comments about the health status of their community. 169(27.52%) respondents had poor or fair appetites but the rest of them had good, very good or excellent appetites. 360(58.07%) of the respondents reported they had been eating a minimum of one fruit per day and 85(13.7%) people drank 5 to 8 glasses of water daily. 441(71.12%) of their diets more or less met daily vitamin and nutrient requirements and 338(54.51%) were nonsmokers. 407(65.64%) were married, and 388 (62.58%) were more or less satisfied about their sexual life. 441(71.12%) respondents performed physical exercise more or less habitually. A lower number of respondents had a major disease. For instance, 155(25%) suffered from high blood pressure, and 150(24.19%) suffered from diabetes. In the case of minor diseases, 399(64.35%) of the respondents had been suffering from GIT disease and 416(67.09%) were taking proton pump inhibitors or a H2 receptor blockers. 205(33.06%) respondents were taking antibiotics regularly.Conclusions: One third of the people had hypertension and diabetes. According to the biomedical concepts, peoples were not healthy. However, according to the ecological and psychological concepts of health, this survey proved that the people of the Chittagong city corporation area were comparatively healthy.
Źródło:: Progress in Health Sciences; 2015, 5, 1; 114-119
2083-1617
Pojawia się w:: Progress in Health Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Medical and healthcare devices: materials perspective
Autorzy:: Hasan, M. K
Anand, S. C
Powiązania:: https://bibliotekanauki.pl/articles/134879.pdf
Data publikacji:: 2014
Wydawca:: Tomasz Mariusz Majka
Tematy:: medical device
healthcare device
medical textile
wound dressing
Opis:: People are special. The importance and need for the research and development into medical and healthcare devices can never be overstated. In the 21st century, medical and healthcare devices play a more vital role in our lives than ever before. A wide range of materials are being used for producing numerous medical and healthcare devices for a variety of end use. In this manuscript, historical development of wound care dressings and products are reviewed. The characteristics and requirements of modern wound dressings are summarized. A core part is devoted to the description of the materials used in medical and healthcare devices. Selected synthetic polymers are listed with their applications in medical and healthcare devices. The advantages and limitations of fibres, metals, ceramics and composites are denoted. Textile structures are highlighted with their applications in medical and healthcare devices.
Źródło:: Journal of Education and Technical Sciences; 2014, 1, 1; 10-13
2300-7419
2392-036X
Pojawia się w:: Journal of Education and Technical Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Simple solution of time travel problems
Autorzy:: Majka, M.
Hasan, Md. K.
Majka, T. M.
Powiązania:: https://bibliotekanauki.pl/articles/134901.pdf
Data publikacji:: 2015
Wydawca:: Tomasz Mariusz Majka
Tematy:: time travel
wormhole hypothesis
Minkowski light cone
event causality
grandfather paradox
philosophical perspective
Opis:: The most desired journey by human being is definitely travel through time. For centuries, people dream about time travel, to be able to go back and fix mistakes of the past. But there are many complications associated with time travel - starting from technological aspects ending with the philosophical paradoxes. Yet, is time travel possible from the technological and philosophical perspectives? How to solve the paradoxes of time travel? It should be noted that realisation of time travel leads not only to the discovery of the nature of time, but also to the understanding how much is unknown about it. In this paper, probability of time travel and solutions to paradoxes will be critically analysed from philosophical perspectives.
Źródło:: Journal of Education and Technical Sciences; 2015, 2, 1; 34-37
2300-7419
2392-036X
Pojawia się w:: Journal of Education and Technical Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Relation between CO₂ emissions and crude oil combustion in Iraq
Autorzy:: Hassan, Ahmed S.
Azeez, Hasan M.
Powiązania:: https://bibliotekanauki.pl/articles/35540085.pdf
Data publikacji:: 2021
Wydawca:: Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:: CO2 emission
crude oil
CO2 concentration
Iraq
Opis:: Fossil fuel is the main source for CO2 emissions that causes global warming. This fact is the starting point for this paper, that consider on three different sources of data: crude oil used to calculate CO2 emissions for Iraq for the period from 1980 to 2018; annual data of total CO2 emissions available from the Carbon Dioxide Information Analysis Center (CDIAC) for Iraq and the world for the period from 1980 to 2014; and CO2 concentrations for Iraq for the period from 2002 to 2006 and for the world for the period from 1980 to 2018. The result is a multifaceted according to the dataset sources. Carbon dioxide emissions calculated from Iraqi crude oil was increased from 1.29 Mt in 2012 to 1.97 Mt in 2018. The world and Iraq CO2 emissions with different slop of average line that was 0.5 for world, 0.003 for Iraq, while increased exponential function from 2008 to 2014 to reach 36 and 0.17 Mt, respectively. The highest value of Iraqi CO2 concentration was 403 ppm in 2016, while the global CO2 concentrations slowly increased with slop line equal to 1.75 ppm per year, from minimum value of 338.6 ppm was in 1980, while maximum value of 407.05 ppm was in 2018, that’s mean no decreased in CO2 concentration unless emissions addressed.
Źródło:: Scientific Review Engineering and Environmental Sciences; 2021, 30, 3; 379-387
1732-9353
Pojawia się w:: Scientific Review Engineering and Environmental Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Performance analysis of cation and anion exchangers in water treatment plant: an industrial case study
Autorzy:: Ramzan, N.
Feroze, N.
Kazmi, M.
Ashraf, M. A.
Hasan, S.
Powiązania:: https://bibliotekanauki.pl/articles/779735.pdf
Data publikacji:: 2012
Wydawca:: Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:: krzywa przebicia
wymiana jonowa
uzdatnianie wody
breakthrough curves
degree of column utilization
ion exchange
water treatment
Opis:: Performance of cation and anion exchangers was evaluated by carrying out breakthrough analyses of pH, conductivity, free mineral acid (FMA) and various dissolved solids for an industrial water treatment plant of 700 gpm capacity. The breakthrough curves showed no leakage of calcium, magnesium and chloride throughout the operating period of the train, however, they indicated the early leakage of sodium, potassium, sulphate and silica. The operating/breakthrough capacity, total capacity and degree of column utilization were determined. The column utilization was found to be 67.85%, 38.93% and 16.78% against the design values of 90%, 85% and 85% for cation, primary and secondary anion exchangers respectively. The operating time of the water treatment train was significantly increased by achieving adequate capacity utilization of secondary anion exchanger. The low capacity utilization of secondary anion resin due to early silica slippage, has been discussed in the paper.
Źródło:: Polish Journal of Chemical Technology; 2012, 14, 2; 35-41
1509-8117
1899-4741
Pojawia się w:: Polish Journal of Chemical Technology
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Comparative Investigation of Exhaust Emissions of Variable Compression Ratio Engine Utilizing Blends of Linseed Oil Biodiesels, Isopropyl Alcohol, Diethyl Ether with Standard Diesel
Autorzy:: Verma, Ajay Singh
Hasan, M. Muzaffarul
Karnwal, Ashish
Powiązania:: https://bibliotekanauki.pl/articles/1159983.pdf
Data publikacji:: 2018
Wydawca:: Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:: Variable compression ratio engine
biodiesels
diethyl ether
exhaust emission
isopropyl alcohol
linseed oil
Opis:: Biodiesel is well known substitute fuel for combustion ignition engines. It can diminish the various harmful emissions like carbon monoxide (CO), hydrocarbon (HC) and particulate matter (PM) emissions; however it holds some draw back that includes increase in nitrogen oxides (NOX) emission as compared with diesel fuel. The present work demonstrates the comparative study of exhaust emissions of a 4-stroke naturally aspirated variable compression ratio compression ignition engine utilizing biodiesel made from linseed oil and sesame oil. Various results of exhaust emissions are obtained through exhaustive experiments at compression ratio 17 and 18. Study showed that the linseed oil displayed the improved emission results in HC emissions and CO emissions whereas blend of isopropyl alcohol and diethyl ether displayed the better emissions of CO2 and NOX and standard diesel as well.
Źródło:: World Scientific News; 2018, 113; 238-250
2392-2192
Pojawia się w:: World Scientific News
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Thermal Properties of Carbon Nanotube (CNT) Reinforced Polyvinyl Alcohol (PVA) Composites
Autorzy:: Hasan, M.
Das, S. K.
Islam, J. M. M.
Gafur, Md. A.
Hoque, E
Khan, M. A.
Powiązania:: https://bibliotekanauki.pl/articles/411675.pdf
Data publikacji:: 2013
Wydawca:: Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:: CNT
PVA
composite
Thermal properties
Gum acacia
Opis:: Homogeneous Polyvinyl alcohol (PVA)/Carbon nanotube (CNT) composite has been prepared by solution casting method using gum acacia as a surfactant. CNT content in the composite was varied from 5-10 % by weight. The thermal properties of PVA/CNT composites were investigated by Thermo Gravimetric/Differential Thermal Analyzer (TG/DTA) and Thermo Mechanical Analyzer (TMA). TG/DTA results showed that higher thermal stability in higher percentage of CNT in the composites. The 10 % CNT containing PVA composite exhibit highest onset of melting, glass transition point and offset of melting temperature and the recoded values are 330.4K, 379K and 421.3K respectively. All of the result indicates that the developed PVA/CNT composite might be promising for use in solar cell application.
Źródło:: International Letters of Chemistry, Physics and Astronomy; 2013, 12; 59-66
2299-3843
Pojawia się w:: International Letters of Chemistry, Physics and Astronomy
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Characteristics of Gillnet Fishing Gear and Vessel Construction in Fish Landing Base of Karangsong, Indramayu, Indonesia
Autorzy:: Apriliani, Izza M.
Hasan, Zahidah
Junianto, Junianto
Kusnadi, Nadia Maudina
Powiązania:: https://bibliotekanauki.pl/articles/1076849.pdf
Data publikacji:: 2019
Wydawca:: Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:: construction
fishing ports
fishing units
gillnetter
millenium net
Opis:: This research study was intended to provide information in order to model an ideal construction of Gillnet fishing practices in PPI Karangsong, in order to support the feasibility of optimum catch. Fish Landing Base (PPI) Karangsong is the most active fishing port in Indramayu. The dominant fishing activity in the Karangsong PPI is gillnet fishing at around 71.4% of the total fishing units. The type of gillnet utilized in Indramayu is commonly called the ‘gillnet millennium’ and it is constructed out of Poly Amide monofilament. The gillnet vessel itself has a hull shaped in the form of a hard chin bottom. Based on this research, it can be concluded that each region has specific fishing unit characteristics that vary in accordance with the conditions of the waters.
Źródło:: World News of Natural Sciences; 2019, 23; 75-83
2543-5426
Pojawia się w:: World News of Natural Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Hasan, M. M." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język