Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Han, Y.-S" wg kryterium: Autor


Tytuł:
3D loss and heat analysis at the end region of 4-poles 1150 MW nuclear power turbine generator
Autorzy:
Zhou, G.
Han, L.
Fan, Z
Liao, Y.
Huang, S.
Powiązania:
https://bibliotekanauki.pl/articles/950663.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
loss and heat
end region
4-poles nuclear power turbine generator
electromagnetic field
temperature field
Opis:
To study the principle of loss and heat at the end region of large 4-poles nuclear power turbine generator, 3D transient electromagnetic field and 3D steady temperature field finite element (FE) models of the end region are established respectively. Considering the factors such as rotor motion, core non-linearity and time-varying of electromagnetic field, the anisotropic heat conductivity and different heat dissipation conditions of stator end region, a 50 Hz, 1150 MW, 4-poles nuclear power turbine generator is investigated. The loss and heat at the generator end region are calculated respectively at no-load and rated-load, and the calculation results are compared with the test data. The result shows that the calculation model is accurate and the generator design is suitable. The method is valuable for the research of loss and heat at the end region of large 4-poles nuclear power turbine generator and the improvement of the generator’s operation stability. The method has been applied successfully for the design of the larger nuclear power turbine generators.
Źródło:
Archives of Electrical Engineering; 2014, 63, 1; 47-61
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adsorption behavior of Zn(II) onto natural minerals in wastewater. A comparative study of bentonite and kaolinite
Autorzy:
Chai, W.
Huang, Y.
Su, S.
Han, G.
Liu, J.
Cao, Y.
Powiązania:
https://bibliotekanauki.pl/articles/109926.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
adsorption
Zn(II)
wastewater
clay minerals
structural properties
Opis:
In order to remove the harmful metal ions in lead-zinc mineral processing wastewater, two natural clay minerals (bentonite and kaolin) were used as adsorbents and Zn(II) ions were the emphasis in this work. The adsorption behaviors including kinetics and isotherms were investigated by batch experiments. In addition, the adsorption mechanisms were studied by means of zeta potential testing, optical microscope and XRD analysis. The results show that the adsorption process can be best described as the pseudo-second order kinetic model. The adsorption equilibrium data of bentonite and kaolinite can be respectively fitted best by Langmuir and Freundlich models. Thermodynamic studies display that the adsorption of Zn(II) onto clays is non-spontaneous and endothermic. The maximum capacity of Zn(II) adsorbed on bentonite and kaolinite respectively reaches to 79.2 mg·g-1 and 6.35 mg·g-1 at 25 °C. The structural differences of bentonite and kaolinite result in the differences in adsorption behavior and mechanism. The interaction mechanisms of Zn(II) with bentonite and kaolinite involve electrostatic attraction, cation exchange, surface complex and precipitation. Bentonite as adsorbent has the potential to remove Zn2+ better than kaolinite.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 1; 264-278
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An innovative methodology for recycling iron from magnetic preconcentrate of an iron ore tailing
Autorzy:
Yu, J.
Han, Y.
Gao, P.
Li, Y.
Yuan, S.
Li, W.
Powiązania:
https://bibliotekanauki.pl/articles/110888.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
magnetic preconcentrate
iron ore tailing
iron recycling
fluidized magnetization roasting
magnetic separation
Opis:
Iron ore tailing is a kind of hazardous solid waste produced by iron and steel industry. In order to separate and recycle iron from the magnetic preconcentrate of an iron ore tailing, an innovative technological route of fluidized magnetization roasting followed by low-intensity magnetic separation was proposed in this paper. The effects of roasting temperature, dosages of reducing gas CO and fluidizing gas N2 on recovery rate of iron were carried out and optimized. The results showed that the hematite was almost reduced to magnetite by a gas mixture of 4 m3/h CO and 1 m3/h N2 at roasting temperature of 540 °C. Under the optimized conditions, a magnetic concentrate assaying 61.4 wt% Fe with a recovery rate of 81.8% was obtained from the magnetic preconcentrate of an iron ore tailing. The iron chemical phase, X-ray diffraction (XRD), and optical metallographic microscope analyses revealed that siderite was converted to magnetite successfully after roasting, and some coarse magnetite-hematite interlocking particles were formed due to insufficient reaction time, which could also be recovered by magnetic separation after liberating from gangue minerals.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 668-676
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of Cladding Hull Wastes from Used Nuclear Fuels
Charakterystyka odpadów z okładzin reaktora wodnego ciśnieniowego
Autorzy:
Kang, K. H.
Lee, C. H.
Jeon, M. K.
Han, S. Y.
Park, G. I.
Hwang, S.-M.
Powiązania:
https://bibliotekanauki.pl/articles/357036.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
used nuclear fuels
metal waste
cladding hulls
zircaloy
radioactivity
reaktor wodny ciśnieniowy
odpady metalowe
odpady z okładzin
radioaktywność
Opis:
Used cladding hulls from pressurized water reactor (PWR) are characterized to provide useful information for the treatment and disposal of cladding hull wastes. The radioactivity and the mass of gamma emitting nuclides increases with an increase in the fuel burn-up and their removal ratios are found to be more than 99 wt.% except Co-60 and Cs-137. In the result of measuring the concentrations of U and Pu included in the cladding hull wastes, most of the residues are remained on the surface and the removal ratio of U and Pu are revealed to be over 99.98 wt.% for the fuel burn-up of 35,000 MWd/tU. An electron probe micro-analyzer (EPMA) line scanning shows that radioactive fission products are penetrated into the Zr oxide layer, which is proportional to the fuel burn-up. The oxidative decladding process exhibits more efficient removal ratio of radionuclides.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1199-1203
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of Hydrophobic Surgical Forceps using Powder Injection Molding and Surface Treatment
Autorzy:
Park, D. Y.
Park, B. R.
Gal, C. W.
Lin, D.
Han, J. S.
Jeong, M.-S.
Bollina, R.
Hwang, W.
Park, S. J.
Powiązania:
https://bibliotekanauki.pl/articles/352093.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
powder injection molding
hydrophobic
debinding
sintering
surface treatment
Opis:
Hydrophobic surgical forceps of end-effectors for laparoscopic operations or minimally invasive surgery were developed through powder injection molding (PIM) and surface treatment. Processing conditions for mixing, debinding, and sintering were investigated to produce defect-free components. An optimum solid loading was determined by torque rheometry experiments. The optimized processing conditions for debinding and sintering were designed through the measurement of weight loss and shrinkage behavior by thermogravimetric analysis and dilatometry experiments. After producing the surgical forceps based on the optimized processing conditions via PIM, surface treatment was carried out to generate the hydrophobic structure on the surface.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 473-480
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Double Step Sintering Behavior Of 316L Nanoparticle Dispersed Micro-Sphere Powder
Dwuetapowe spiekanie mikrosferycznych nanocząstek proszku 316L
Autorzy:
Jeon, B.
Sohn, S. H.
Lee, W.
Han, C.
Kim, Y. D.
Choi, H.
Powiązania:
https://bibliotekanauki.pl/articles/355221.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
316L stainless steel
nanoparticle dispersed micro-sphere
pulse wire explosion
sintering
stal nierdzewna 316L
spiekanie dwuetapowe
mikrosferyczne nanocząstki
Opis:
316L stainless steel is a well-established engineering material and lots of components are fabricated by either ingot metallurgy or powder metallurgy. From the viewpoints of material properties and process versatility, powder metallurgy has been widely applied in industries. Generally, stainless steel powders are prepared by atomization processes and powder characteristics, compaction ability, and sinterability are quite different according to the powder preparation process. In the present study, a nanoparticle dispersed micro-sphere powder is synthesized by pulse wire explosion of 316L stainless steel wire in order to facilitate compaction ability and sintering ability. Nanoparticles which are deposited on the surface of micro-powder are advantageous for a rigid die compaction while spherical micro-powder is not to be compacted. Additionally, double step sintering behavior is observed for the powder in the dilatometry of cylindrical compact body. Earlier shrinkage peak comes from the sintering of nanoparticle and later one results from the micro-powder sintering. Microstructure as well as phase composition of the sintered body is investigated.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1155-1158
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of calcination temperature on activation behaviors of coal-series kaolin by fluidized bed calcination
Autorzy:
Yuan, S.
Han, Y.
Li, Y.
Gao, P.
Yu, J.
Powiązania:
https://bibliotekanauki.pl/articles/109800.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coal-series kaolin
fluidized bed calcination
calcination temperature
activation behaviors
Opis:
This paper is aimed at investigating activation behaviors for coal-series kaolin using fluidized bed calcination as a novel method. The properties of calcined products at different temperature by fluidized bed calcination were evaluated by determination of weight loss rate, whiteness, chemical oxygen demand (COD), aluminum dissolution degree. The thermal behaviors and reaction mechanism were characterized by thermo gravimetric-differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), particle size distribution (PSD) and scanning electron microscopy (SEM). The results showed that calcination temperature was essential factor determining the properties and crystallinity of calcined products using fluidized bed calcination. Coal-series kaolin transformed into irregular and amorphous metakaolin with excellent properties as calcined at 600-900 °C, which attributed to the dehydroxylation of kaolinite and combustion of carbon/organic matter. Calcined kaolin eliminated activity ascribed to the recrystallization into mullite when calcination temperature was over 1000 °C. It was believed that fluidized bed calcination was an efficient thermal activation technology for coal-series kaolin and the calcination temperature should be controlled accurately.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 590-600
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flexible Software Design for Korean WA-DGNSS Reference Station
Autorzy:
Choi, W.S.
Chhattan, S.S.
Kye, J.E.
Han, W.Y.
Yun, H.
Kee, C.
Powiązania:
https://bibliotekanauki.pl/articles/116770.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Global Navigation Satellite System (GNSS)
Flexible Software Design
Wide area Reference Station (WRS)
Opis:
In this paper, we describe the software design results of WA‐DGNSS reference station that will be constructed in Korea in the near future. Software design of the WRS (Wide area Reference Station) is carried out by applying object oriented software methodology in order to provide flexibilities: easy of model change (namely ionospheric delay model etc) and system addition (Galileo, GLONASS in addition to GPS etc). Software design results include the use case diagrams for the functions to be executed, the architecture diagram showing components and their relationships, the activity diagrams of behaviors and models among them, and class diagrams describing the attribute and operation.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2013, 7, 1; 75-78
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved Mechanical Properties of Al-Si Alloys by Adding an Extrusion Process to Conventional Processing Method
Autorzy:
Han, J. Y.
Femi, O. E.
Kilicaslan, F.
Jeong, C. U.
Baeg, C. H.
Hong, S. J.
Koo, J. M.
Powiązania:
https://bibliotekanauki.pl/articles/355114.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Al-Si alloys
extrusion
mechanical properties
Opis:
In this study, the mechanical properties of Al-Si alloys was improved by selecting higher Si content and avoiding distortion in Al-Si matrix by adding an extrusion process such that the fabrication processes casting and extrusion were in sequence. Cast billets were extruded at ratios 4:1 and 10:1 to obtained two extruded bars with different processing parameters. The as-extruded samples were characterized and investigated for microstructure and mechanical properties. Optical Microscope was used to examined phase morphologies and microstructures of the extruded Al-Si bars. Mechanical properties were conducted on each sample to study the effectiveness of the additional extrusion process in high Si content Al-Si alloys. The result shows that by increasing the extrusion ratio, the size of the primary Si particle reduces leading to a higher density, better tensile and yield strength compared to the cast billet.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1179-1183
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Korean WA-DGNSS User Segment Software Design
Autorzy:
Shah, S. T.
Choi, W.S.
Han, W.Y.
Yun, H.
Kee, C.
Powiązania:
https://bibliotekanauki.pl/articles/116066.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
global navigation satellite system (GNSS)
Global Positioning System GPS
User Segment
GPS Data Processing Classes
Opis:
Korean WA‐DGNSS is a large scale research project funded by Ministry of Land, Transport and Maritime Affairs Korea. It aims to augment the Global Navigation Satellite System by broadcasting additional signals from geostationary satellites and providing differential correction messages and integrity data for the GNSS satellites. The project is being carried out by a consortium of universities and research institutes. The research team at Electronics and Telecommunications Research Institute is involved in design and development of data processing softwares for wide area reference station and user segment. This paper focuses on user segment software design. Korean WA‐DGNSS user segment software is designed to perform several functions such as calculation of pseudorange, ionosphere and troposphere delays, application of fast and slow correction messages, and data verification. It is based on a layered architecture that provides a model to develop flexible and reusable software and is divided into several independent, interchangeable and reusable components to reduce complexity and maintenance cost. The current version is designed to collect and process GPS and WADGNSS data however it is flexible to accommodate future GNSS systems such as GLONASS and Galileo.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2013, 7, 1; 69-74
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Morphology Change Of Si Deposit In Molten Salt Electrorefining
Zmiana morfologii osadu Si podczas elektrorafinacji w stopionych solach
Autorzy:
Ryu, H. Y.
Kwon, S. C.
Han, M. H.
An, Y. S.
Lee, J. S.
Lee, J. H.
Powiązania:
https://bibliotekanauki.pl/articles/354346.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
molten salt
silicon
morphology
electrorefining
current density
sól stopiona
krzem
morfologia
elektrorafinacja
gęstość prądu
Opis:
The effects of processing parameters on the morphology change in a Si deposit recovered by means of molten salt electrorefining are evaluated using electrochemical techniques such as cyclic voltammetry and chronopotentiometry at 800°C. It was found that concentration of K2SiF6 and current density were important parameters in determining deposit size. Higher concentrations of K2SiF6 were effective in coarsening the silicon deposit and decreasing the cell potential. Silicon nanofiber was recovered at 5 wt% of K2SiF6 whereas dense particles were prepared at 30 and 50 wt% of K2SiF6. The morphology of the Si deposit was determined by the concentration of Si in the electrolyte which is related to the formation of crystal and growth of Si. The formation mechanism of the Si deposit was interpreted by using high resolution TEM as well as electrochemical properties.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1491-1497
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multivariate statistical analysis of water quality and phytoplankton characteristics in Daya Bay, China, from 1999 to 2002
Autorzy:
Wang, Y.S.
Lou, Z.P.
Sun, C.C.
Wu, M.L.
Han, S.H.
Powiązania:
https://bibliotekanauki.pl/articles/48049.pdf
Data publikacji:
2006
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
South China Sea
water quality
China
phytoplankton
Daya Bay
multivariate statistical analysis
Opis:
This study analyzed seasonal physicochemical and phytoplankton data collected at 12 marine monitoring stations in Daya Bay from 1999 to 2002. Cluster analysis based on water quality and phytoplankton parameters measured at the 12 stations could be grouped into three clusters: cluster I – stations S1,S2 , S7 and S11 in the southern part and the north-eastern part of Daya Bay; cluster II – stations S5, S6,S9 ,S1 0 and S12 in the central and north-eastern parts of Daya Bay; cluster III – stations S3,S 4 and S8 in the cage culture areas in the south-western part of Daya Bay and in the north-western part of the Bay near Aotou harbor. Bivariate correlations between phytoplankton density and the major physical and nutrient factors were calculated for all stations. Factor analysis shows that there were high positive loadings of pH,T IN and the ratio of TIN to PO4-P in the three clusters, which indicates that all the stations in the three clusters were primarily grouped according to their respective nutrient conditions.
Źródło:
Oceanologia; 2006, 48, 2
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Novel roles for glutathione in linking oxidative stress to phytohormone-dependent signalling
Autorzy:
Noctor, G.
Han, Y.
Chaouch, S.
Mhamdi, A.
Powiązania:
https://bibliotekanauki.pl/articles/80088.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
conference
glutathione
oxidative stress
phytohormone
antioxidant
protein structure
protein function
signalling
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2013, 94, 2
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies