Autor: Haddar, M. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Dynamic behavior of a rotor supported by angular ball bearings
Autorzy:: Abbes, M. S.
Hentati, T.
Maatar, M.
Fakhfakh, T.
Haddar, M.
Powiązania:: https://bibliotekanauki.pl/articles/327818.pdf
Data publikacji:: 2009
Wydawca:: Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:: łożysko kulkowe skośne
wirnik
analiza dynamiczna
angular ball bearing
rotor
dynamic analysis
bearing interaction
Opis:: The wide range and large scale usage of rolling bearings indicates their necessity and vital contribution to the performance of modern industries. In this paper, a non linear model, predicting mechanical behavior of the loaded angular ball bearing, have been developed. The dynamic behavior of a rotor supported by two angular ball bearings is analyzed. The finite element method is used and the rotor is decritizied on beam elements. A mathematical modal taking account different sources of non linearity: the Hertzian contact force and the action of all balls on the bearings inner races, is developed. The Newmark algorithm coupled with Newton Raphson iterative method is used to solve the non linear differential equation iteratively.
Źródło:: Diagnostyka; 2009, 3(51); 3-8
1641-6414
2449-5220
Pojawia się w:: Diagnostyka
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Effect of camshaft eccentricity and follower backlash on the dynamic behaviour flexible cam mechanism
Autorzy:: Tounsi, M.
Chaari, F.
Abbes, M. S.
Fakhfakh, A. T.
Haddar, M.
Powiązania:: https://bibliotekanauki.pl/articles/329630.pdf
Data publikacji:: 2010
Wydawca:: Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:: wał rozrządu
charakterystyka dynamiczna
symulacja
cam
follower
dynamic response simulation
camshaft eccentricity
follower backlash
Opis:: A cam follower system is modelled in this work. The equation of motion and the eigenfrequencies are recovered. The computation of the dynamic response is made by mean of combined implicit Newmark-Newton Raphson algorithm. Moreover, dynamic behaviour of the follower train is analysed in presence of an eccentricity in the camshaft and backlash between the follower rods and its guide.
Źródło:: Diagnostyka; 2010, 2(54); 3-9
1641-6414
2449-5220
Pojawia się w:: Diagnostyka
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Numerical Modelling of the Acoustic Pressure Inside an Axisymmetric Lined Flow Duct
Autorzy:: Taktak, M.
Majdoub, M. A.
Bentahar, M.
Haddar, M.
Powiązania:: https://bibliotekanauki.pl/articles/177750.pdf
Data publikacji:: 2012
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: lined duct
mean flow
finite element method
axisymmetric duct
Opis:: Numerical methods are mostly used to predict the acoustic pressure inside duct systems. In this paper, the development of a numerical method based on the convected Helmholtz equation to compute the acoustic pressure inside an axisymmetric duct is presented. A validation of the proposed method was done by a comparison with the analytical formulation for simple cases of hard wall and lined ducts. The effect of the flow on the acoustic pressure inside these ducts was then evaluated by computing this field with different Mach numbers.
Źródło:: Archives of Acoustics; 2012, 37, 2; 151-160
0137-5075
Pojawia się w:: Archives of Acoustics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Numerical characterization of an axisymmetric lined duct with flow using the multimodal scattering matrix
Numeryczna charakteryzacja wyściełanego przewodu osiowo-symetrycznego z przepływem za pomocą wielomodalnej macierzy rozpraszania
Autorzy:: Taktak, M.
Majdoub, M. A.
Haddar, M.
Bentahar, M.
Powiązania:: https://bibliotekanauki.pl/articles/281218.pdf
Data publikacji:: 2013
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: lined duct
scattering matrix
mean flow
Opis:: In this paper, the development of a numerical method to compute the multimodal scattering matrix of a lined duct in the presence of flow is presented. This method is based on the use of the convected Helmholtz equation and the addition of modal pressures at duct boundaries as additional degrees of freedom of the system. The boundary effects at the inlet and outlet of the finite waveguide are neglected. The choice of this matrix is justified by the fact that it represents an intrinsic characterization of a duct system. The validation of the proposed finite element is done by a comparison with the analytical formulation for simple cases of ducts. Then, the numerical coefficients of the scattering matrix of a lined duct and its acoustic power attenuation are computed for several flow velocities to evaluate the flow effect.
W pracy zaprezentowano numeryczną metodę wyznaczania macierzy rozpraszania dla wyściełanego przewodu z uwzględnieniem wewnętrznego przepływu czynnika. Metodę oparto na zastosowaniu równania konwekcji Helmholtza z wprowadzeniem ciśnień modalnych na brzegach jako dodatkowych stopni swobody układu. Efekty brzegowe na wlocie i wylocie przewodu falowego o skończonej długości pominięto. Wybór macierzy rozpraszania uzasadniono faktem, że reprezentuje ona wewnętrzną charakterystykę analizowanego modelu. Zaproponowany element skończony zweryfikowano poprzez porównanie z istniejącymi rozwiązaniami analitycznymi dla prostych przypadków konfiguracji przewodu. Następnie numerycznie obliczono wartości elementów macierzy rozpraszania oraz współczynniki tłumienia akustycznego dla kilku prędkości przepływu w celu określenia, jak dalece wpływa on na badany układ.
Źródło:: Journal of Theoretical and Applied Mechanics; 2013, 51, 2; 313-325
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Vibro-acoustic analysis of laminated double glazing using the force identification method
Autorzy:: Ben Jdidia, M
Akrout, A
Tounsi, D
Fakhfakh, T.
Haddar, M.
Powiązania:: https://bibliotekanauki.pl/articles/949211.pdf
Data publikacji:: 2014
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: fluid-structure interaction
thin-film laminated plate
ICA
excitation force
Kurtosis
Opis:: This paper presents a procedure for identifying wave forms and excitation frequencies of some forces applied on a given complex fluid-structure coupled system by using only its vibro-acoustic response. The considered concept is called the Independent Component Analysis (ICA) which is based on the Blind Source Separation (BSS). In this work, the ICA method is exploited in order to determine the excitation force applied to a thin-film laminated double glazing system enclosing a thin fluid cavity and limited by an elastic joint. The dynamic response of the studied fluid-structure coupled system is determined by finite element discretization and minimization of the homogenized energy functional of the coupled problem. This response will serve as the input for the ICA algorithm in order to extract the applied excitation.
Źródło:: Journal of Theoretical and Applied Mechanics; 2014, 52, 4; 895-904
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Effect of Liner Characteristics on the Acoustic Performance of Duct Systems
Autorzy:: Othmani, C.
Hentati, T.
Taktak, M.
Elnady, T.
Fakhfakh, T.
Haddar, M.
Powiązania:: https://bibliotekanauki.pl/articles/176887.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: porous material
perforated plate
duct system
scattering matrix
acoustic attenuation
Opis:: Porous materials are used in many vibro-acoustic applications. Different models describe their performance according to material’s intrinsic characteristics. In this paper, an evaluation of the effect of the porous and geometrical parameters of a liner on the acoustic power attenuation of an axisymmetric lined duct was performed using multimodal scattering matrix. The studied liner is composed by a porous material covered by a perforated plate. Empirical and phenomenal models are used to calculate the acoustic impedance of the studied liner. The later is used as an input to evaluate the duct attenuation. By varying the values of each parameter, its influence is observed, discussed and deduced.
Źródło:: Archives of Acoustics; 2015, 40, 1; 117-127
0137-5075
Pojawia się w:: Archives of Acoustics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Inverse method for a one-stage spur gear diagnosis
Autorzy:: Akrout, A.
Tounsi, D.
Taktak, M.
Abbes, M. S.
Haddar, M.
Powiązania:: https://bibliotekanauki.pl/articles/949292.pdf
Data publikacji:: 2015
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: Independent Component Analysis (ICA)
source identification
gear mechanism
geometrical defects
Opis:: In this paper, a source separation approach based on the Blind Source Separation (BSS) is presented. In fact, the Independent Component Analysis (ICA), which is the main technique of BSS, consists in extracting different source signals from several observed mixtures. This inverse method is very useful in many fields such as telecommunication, signal processing and biomedicine. It is also very attractive for diagnosis of mechanical systems such as rotating machines. Generally, dynamic responses of a given mechanical system (displacements, accelerations and speeds) measured through sensors are used as inputs for the identification of internal defaults. In this study, the ICA concept is applied to the diagnosis of a one-stage gear mechanism in which two types of defects (the eccentricity error and the localized tooth defect)are introduced. The finite element method allows determination of the signals corresponding to the acceleration in some locations of the system, and those signals may be used also in the ICA algorithm. Hence, the vibratory signatures of each defect can be identified by the ICA concept. Thus, a good agreement is obtained by comparing the expected default signatures to those achieved by the developed inverse method.
Źródło:: Journal of Theoretical and Applied Mechanics; 2015, 53, 3; 617-628
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Modal analysis of back-to-back planetary gear: experiments and correlation against lumped-parameter model
Autorzy:: Hammami, A.
Rincon, A. F. del
Rueda, F. V.
Chaari, F.
Haddar, M.
Powiązania:: https://bibliotekanauki.pl/articles/280785.pdf
Data publikacji:: 2015
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: back-to-back planetary gears
modal analysis
lumped-parameter
impact test
Opis:: In order to characterize the dynamic behaviour of a back-to-back planetary gear, experimental and numerical modal analysis techniques are achieved. Rotational and translational modal deflections are highlighted. Natural frequencies are compared to the results from the lumped-parameter model. The modes are presented in the numerical studies in low-frequency and high-frequency bands. Distributions of modal kinetic and strain energies are studied.
Źródło:: Journal of Theoretical and Applied Mechanics; 2015, 53, 1; 125-138
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Pre-designing of a mechatronic system using an analytical approach with Dymola
Autorzy:: Hamza, G.
Choley, J.-Y.
Hammadi, M.
Riviere, A.
Barkallah, M.
Louati, J.
Haddar, M.
Powiązania:: https://bibliotekanauki.pl/articles/281893.pdf
Data publikacji:: 2015
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: pre-dimensioning
Dymola
analytical method
vibration
rectangular plate
Opis:: This paper presents a pre-dimensioning method applied to a mechatronic system and regarding the vibrational aspect, through a simple modeling process in Dymola environment. We study the vibration transmission between dynamic exciters (motors) and receivers (electronic cards) which are located on a simply supported rectangular plate, using an analytical approach. This new method will allow us to perform representative and robust modeling and simulation. The solution for this issue would be a pre-sizing and pre-positioning procedure. It aims to determine a set of possible technical solutions and principal characteristics before the definitive choice of components and precise sizing of the system. The presented method predicts also behaviour of the mechatronic system. In order to validate the model with respect to the finite element method, selected simulation results are presented.
Źródło:: Journal of Theoretical and Applied Mechanics; 2015, 53, 3; 697-710
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Cutting parameters and vibrations analysis of magnetic bearing spindle in milling process
Autorzy:: Bouaziz, A.
Barkallah, M.
Bouaziz, S.
Choley, J. Y.
Haddar, M.
Powiązania:: https://bibliotekanauki.pl/articles/279623.pdf
Data publikacji:: 2016
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: milling process
cutting forces
chip thickness
dynamic coefficients
orbit
Opis:: In modern production, milling is considered the widespread cutting process in the formatting field. It remains important to study this manufacturing process as it can be subject to some parasitic phenomena that can degrade surface roughness of the machined part, increase tool wear and reduce spindle life span. In fact, the best quality work piece is obtained with a suitable choice of parameters and cutting conditions. In another hand, the study of tool vibrations and the cutting force attitude is related to the study of bearings as they present an essential part in the spindle system. In this work, a modeling of a High Speed Milling (HSM) spindle supported by two pair of Active Magnetic Bearings (AMB) is presented. The spindle is modeled by Timoshenko beam finite elements where six degrees of freedom are taken into account. The rigid displacements are also introduced in the modeling. Gyroscopic and centrifugal terms are included in the general equation. The bearings reaction forces are modeled as linear functions of journal displacement and velocity in the bearing clearance. A cutting force model for peripheral milling is proposed to estimate the tool-tip dynamic responses as well as dynamic cutting forces which are also numerically investigated. The time history of response, orbit, FFT diagram at the tool-tip center and the bearings dynamic coefficients are plotted to analyze dynamic behavior of the spindle.
Źródło:: Journal of Theoretical and Applied Mechanics; 2016, 54, 3; 691-703
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Dynamic response of a spur gear system with uncertain parameters
Autorzy:: Guerine, A.
Hami, A. E.
Walha, L.
Fakhfakh, T.
Haddar, M.
Powiązania:: https://bibliotekanauki.pl/articles/280323.pdf
Data publikacji:: 2016
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: uncertainty
spur gear system
polynomial chaos approach
gear parameters
Opis:: In this paper, we propose a new approach for taking into account uncertainties based on the projection on polynomial chaos. The new approach is used to determine the dynamic response of a spur gear system with uncertainty associated to gear system parameters. The simulation results are obtained by the polynomial chaos approach for dynamic analysis under uncertainty. The proposed approach is an efficient probabilistic tool for uncertainty propagation. It has been found to be an interesting alternative to the parametric studies. The polynomial chaos results are compared with Monte Carlo simulations.
Źródło:: Journal of Theoretical and Applied Mechanics; 2016, 54, 3; 1039-1049
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Guided wave propagation in thermal media through the semi analytical finite element method
Autorzy:: Bouchoucha, F.
Chaabane, S.
Ichchou, M. N.
Haddar, M.
Powiązania:: https://bibliotekanauki.pl/articles/281275.pdf
Data publikacji:: 2016
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: semi analytical finite element
thermal media
dispersion
velocity
Opis:: In this paper, the issue of the estimation of wave propagation characteristics in thermal media is dealt with. A formulation, named the Thermal Semi Analytical Finite Element, based on the semi analytical finite element approach coupled with the thermal effect is offered. Temperature variations affect the mechanical properties of the waveguide. The question of dispersion curves and group velocities is studied. This study is expected to be of use in the sensitivity analysis of guided waves for wave propagation in thermal environment. Comparisons between numerical and analytical results are given to show the effectiveness of the proposed approach.
Źródło:: Journal of Theoretical and Applied Mechanics; 2016, 54, 1; 285-293
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Influence of uncertainty in aerodynamic performance on the dynamic response of a two stage gear system
Autorzy:: Tounsi, M.
Beyaoui, M.
Abboudi, K.
Feki, N.
Walha, L.
Haddar, M.
Powiązania:: https://bibliotekanauki.pl/articles/281135.pdf
Data publikacji:: 2016
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: gearbox
uncertainty
power coefficient
random parameter
polynomial chaos
Opis:: In this paper, the nonlinear dynamic response in a wind turbine system is considered and the quantification of uncertainty effects on the variability of this nonlinear response is investigated. Under dynamic conditions, a lumped model with 12 degrees of freedom is proposed taking into account the uncertainty associated to the power coefficient of the input aerodynamic torque. The dynamic response of the two-stage spur gear system is obtained using ODE45 solver of Matlab. The Polynomial Chaos (PC) method is used to introduce the uncertainties on the proposed model. A comparison between the two dynamic responses given by the proposed lumped dynamic model takes into account the uncertainty. It is performed on the existed model without uncertainty. Thus, the efficiency and robustness of the proposed new methodology is evaluated.
Źródło:: Journal of Theoretical and Applied Mechanics; 2016, 54, 2; 601-612
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Mode of failure for reinforced concrete beams with GFRP bars
Autorzy:: Masmoudi, A.
Ouezdou, M. B.
Haddar, M.
Powiązania:: https://bibliotekanauki.pl/articles/279428.pdf
Data publikacji:: 2016
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: crack propagation
flexural failure
concrete
GFRP bars
stress distribution
Opis:: Crack propagation in concrete structures is a very complicated process. An experimental method to predict the stress distribution of a cracked GFRP reinforced concrete flexural beam is presented. The beam subjected to four-point bending is internally reinforced with unidirectional GFRP bars. The aim of this investigation is to study the flexural performance of reinforced concrete members strengthened using GFRP bars. For the flexural tests performed on reinforced concrete beams strengthened with GFRP bars, the ultimate load of the beams strengthened with GFRP was reasonably increased. The mode of failure for beams reinforced with GFRP sections is slightly different compared with the traditional beam. The GFRP reinforced concrete beams fail either by concrete crushing at the compression zone or rupture of the GFRP reinforcement.
Źródło:: Journal of Theoretical and Applied Mechanics; 2016, 54, 4; 1137-1146
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Effect of geometry and impedance variation on the acoustic performance of a porous material lined duct
Autorzy:: Masmoudi, A.
Makni, A.
Taktak, M.
Haddar, M.
Powiązania:: https://bibliotekanauki.pl/articles/281635.pdf
Data publikacji:: 2017
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: cylindrical duct
discontinuity effect
transmission
reflection
acoustic attenuation
Opis:: In this paper, the effect of geometry and impedance on the acoustic behavior of wall and lined cylindrical ducts is investigated using a numerical model which enables one to compute the reflection and the transmission coefficients of such ducts using the multimodal scattering matrix. From this matrix, the acoustic power attenuation is deduced. By using these tools, the effect of duct diameter increase and duct diameter decrease of the wall or lined duct section is studied. The numerical results are obtained for two configurations of wall and lined ducts. Numerical coefficients of transmission and reflection as well as the acoustic power attenuation show the relative influence of each type of variation.
Źródło:: Journal of Theoretical and Applied Mechanics; 2017, 55, 2; 679-694
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Haddar, M." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język