Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Guo, Chao" wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Study of a new type of Flettner rotor in merchant ships
Autorzy:
Li, Boyang
Zhang, Rui
Li, Yajing
Zhang, Baoshou
Guo, Chao
Powiązania:
https://bibliotekanauki.pl/articles/1573694.pdf
Data publikacji:
2021
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
ship propulsion
flettner rotor
wind energy
rotating cylinder
numerical simulation
Opis:
Wind energy is a clean and renewable source of energy. This study seeks to explore the potential for utilising wind power for merchant ships. A new type of Flettner rotor (rotating cylinder) mounted on the superstructure of a ship is proposed and numerically simulated. The construction and installation of the rotating cylinder is designed and a numerical simulation of the ship-mounted cylinder is carried out, using the commercially available CFD code Ansys Fluent to obtain parameters such as lift and drag coefficient of the cylinder in different conditions. Specifically, it is found that the cylinder type superstructure can play a certain role in reducing the effect of friction by comparing traditional and cylindrical superstructures; the rotating cylinder can generate auxiliary thrust for the ship. After analysis, the wind speed around the cylinder and spin ratio will have a direct influence on its thrust effect; there is an inflection point in the lift coefficient with the increase of α; the thrust coefficient (8.63) reaches the maximum environmental wind speed at 10 m/s and spin ratio is 2.5. For the rotating cylinder, the greater the environmental wind, the greater the thrust contribution generated under the same spin ratio conditions. The maximum thrust can reach 750,000 N; the cylinder’s auxiliary propulsion contribution shows a better advantage in α = 2.0. The effective power generated by the cylinder reaches a maximum of 2,240 kW for environmental wind speed = 20 m/s and α = 1.0.
Źródło:
Polish Maritime Research; 2021, 1; 28-41
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of High Nano-ZnO Doped with Boric Acid Assembled on Cotton Fabric with Flame Retardant Properties
Badanie właściwości ognioodpornych tkaniny bawełnianej pokrytej nano-ZnO
Autorzy:
Ling, Chao
Guo, Lamei
Powiązania:
https://bibliotekanauki.pl/articles/234099.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
high-load
ZnO
boric acid
cotton fabric
flame retardant
kwas borowy
tkanina bawełniana
ognioodporność
Opis:
In this study, an attempt was made to investigate the flame retardancy of cotton fabrics coated with a high nano-ZnO content. Via a simply method in situ, a novel ZnO/cotton composite can be fabricated with a high proportion of nano-ZnO assembled on cotton fabric, where the finished cotton fabric has a certain property of flame retardancy. Discussed herein is the effect of the processed liquid concentration, ammonia-smoking time, and curing temperature on fabric properties such as flame retardancy and hand feeling. Performed were also tests of doping boric acid using the vertical burning method. The finished cotton fabrics were analysed using X-Ray Diffrcation (XRD) and a field emission scanning electron microscope(FESEM), which indicated that between the fibres, and inside the lumen and mesopores of the cotton fibres are assembled with nano-ZnO. The results show that the nano-ZnO content on cotton fabrics can reach up to 15.63 wt%, with the finished cotton fabric having excellent flame retardancy, despite the long after-glow time; however, doping with 0.8 wt% boric acid on the cotton fabric can markedly reduce this. Therefore, a high amount of nano-ZnO doped with boric acid assembled on cotton fabric has great potential in the future.
W pracy podjęto próbę zbadania ognioodporności tkanin bawełnianych pokrytych nano-ZnO. Omówiono wpływ przetworzonej cieczy, stężenie, czas palenia amoniaku i temperaturę utwardzania (wulkanizacji) na właściwości tkaniny bawełnianej, takie jak: ognioodporność i chwyt. Wykonano również analizę kwasu borowego metodą pionowego spalania. Gotowe tkaniny bawełniane analizowano za pomocą dyfrakcji rentgenowskiej (XRD) i skaningowego mikroskopu elektronowego z emisją polową (FESEM), które wskazywały, że między włóknami oraz w lumenach i mezoporach włókien bawełnianych zgromadził się nano-ZnO. Wyniki pokazują, że zawartość nano-ZnO na tkaninach bawełnianych może dochodzić do 15,63% wag., Przy czym gotowa tkanina bawełniana ma doskonałą ognioodporność, pomimo długiego czasu po żarzeniu, jednak dodanie 0,8% wag. kwasu borowego może to znacznie zmniejszyć. Stwierdzono, że zastosowanie nano-ZnO z kwasem borowym na tkaninie bawełnianej ma ogromny potencjał do zastosowania w przyszłości.
Źródło:
Fibres & Textiles in Eastern Europe; 2019, 4 (136); 65-70
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flexible-elastic deformation measurement of ZnS:Cu2+ mechanoluminescent film using visual inspection and digital image correlation
Autorzy:
Gu, Guo-Qing
Xu, Gui-Zhong
Shen, Feng
Zhou, Peng
Sun, Hou-Chao
Weng, Jia-Xing
Powiązania:
https://bibliotekanauki.pl/articles/27311740.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
ZnS:Cu2+-PDMS mechanoluminescent film
flexible-elastic deformation performance
visual inspection
digital image correlation
Opis:
ZnS-based mechanoluminescent film has been widely used in the fields of stress visualization and stress sensing, due to its high brightness and repeatable stable luminescent characteristics. To evaluate the flexible-elastic deformation performance of ZnS-based mechanoluminescent film, both visual inspection and digital image correlation (DIC) are, respectively, employed for measuring the ZnS-based mechanoluminescent film. ZnS:Cu2+ mechanoluminescent powders are first mixed with polydimethylsiloxane (PDMS) matrix to produce ZnS:Cu2+-PDMS mechanoluminescent film. Then, two measurement experiments are, respectively, conducted to investigate the mechanical response and the flexible-elastic deformation performance of the prepared ZnS:Cu2+-PDMS mechanoluminescent film. On one hand, the mechanical response performance of the ZnS:Cu2+-PDMS mechanoluminescent film is validated by visual monitoring of composite concrete fracture processes. On the other hand, the prepared ZnS:Cu2+-PDMS mechanoluminescent film is also measured by DIC to obtain its full-field deformations and strains information. The flexible-elastic deformation performance of the ZnS:Cu2+-PDMS mechanoluminescent film is well demonstrated by the DIC measured results.
Źródło:
Metrology and Measurement Systems; 2023, 30, 2; 353--365
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies